CDVI WIRELESS S P A DTFT01 Part 15 Security/Remote Control Transmitter User Manual tx DTF

CDVI WIRELESS S.P.A. Part 15 Security/Remote Control Transmitter tx DTF

15_DIGITAG-F_UserMan

1.0 Product introduction2.0 Product range3.0 Technical specificationsThe Digitag-F type DTFT01 is a radio active tag, operating at 433,92 MHz in GFSK modulation.The tag transmits continously a radio pulse with a period of 1 sec. A special algorithm adds to the rated time period a small slot, realizing, in this way, an anticollision system, which avoids the overlapping of the RF signals of many tags when standing simultaneously in the same field.Operating frequency: 433.92 MHzModulation: GFSKFrequency deviation: 100 KHzE.r.p. power: 4 ìWTransmission period: 1 Sec + anticollision slotFrame duration: 555 ìSec Power supply: 3 VdcBattery: Lithium CR2032Security code combinations: 16777215Range in open space: 20 mOperating temperature: -30°C / +70 °CDimensions: 61 x 36 x 16 mmWeight: 20 gr. Led colourDescriptionGREENRegular status: battery life 1 yearORANGEBattery low: the functionality of the tag is guaranted for 1 month REDBattery empty :Change battery : tag functionality not guaranted.DIGITAG-F Tri-colour led4.0 Led MessagesThe tag is equipped with a tri-colour led which gives the following information:Tag activity: the led makes a flash every 5 radio transmissions, for battery saving reasons.Battery status: the colour of the flash gives the status of the battery, according to the following table:!!Fig. 1 P/NDescriptionF-CodeDTFT01Active tagF0104000050DTFT01HRActive tag with build-in125 KHz HID passive tag F0104000049
LED Key-holder ringBattery doorFig. 2Fig. 3 CR2032 Battery accessFig. 4Contact (+)Contact (-)Manufactured by ELPRO INNOTEK S.p.A. - CDVI GROUPVia Piave, 23 31020 S.Pietro di Feletto (TV) - ITALYThe guarantee period of this product is 24 months, beginning from the manufacturing date. During this period, if the product does not work correctly, due to a defective component, it will be repaired or substituted at the discretion of the producer. The guarantee does not cover the plastic container integrity. After-sale service is supplied at the manufacturer factory.GuaranteeIS-DTF01UK Rev. 1 on 13/05/2013This device complies with FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation.Part. 15 of the FCC ID : PWJDTFT01ATTENTION: the tag is provided with a transparent strip which prevents the automatic transmission. Remove it before use.This EUT is in compliance with MPE for general population / uncontrolled exposure limits and it had been tested in accordance with the measurement methods and procedures specified in !RF EXPOSURE WARNING FCC 47 CFR § 1.1310 and 2.1091 To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance are not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.

Navigation menu