CDVI WIRELESS S P A DK433 RADIO KEYBOARD ERONE MOD. DIGIKEY SEDK2641A4 User Manual Istruzioni digikey

CDVI WIRELESS S.P.A. RADIO KEYBOARD ERONE MOD. DIGIKEY SEDK2641A4 Istruzioni digikey

User Manual

147*369#2580GUARANTEEWarranty period : 24 months from the production date placed inside. In this period if the appliance has any malfuction due to defective component, it will be repaired or replaced by the manufacturer. The warranty doesn't cover the plastic box The assistance will be perfomed at the manufacturer site. KEYPAD RCS-433KPWe appreciate your choice of this product.This product is addressed to manage the access in automatic gates and door control systems.This keypad has been carefully manufactured and checked.The manufacturer has designed this system to assure the best rielability and satisfaction.We recommend that you read carefully this manual before proceeding with the installation Technical SpecificationsOperating Frequency 433,92 MHzPower supply 3 VdcModulation AM/ASK Number of keys 12Coding type Rolling Code64Number of combinations 2E.r.p. 6 mWAbsorbtion 20 mARange in open space 150 - 700 metersTransmission duration 2 sec.Housing protection IP 44 Operating temperature from 14 °F to 131 °FDimensions 5.7x3.07x1.25 inWeight 3.24 ozBattery type Lithium 123AIntroductionThis keypad is a radiotransmitter operating at 433,92 MHz in AM/ASK modulation.It can be used as master transmitter to program the block receiver RCS-433BMR.The security code is a rolling type: that means that it changes at each transmission avoiding any risk of copy and scanning.Each product is set-in-factory with a different serial number.This keypad can be used only as master transmitter but doesn’t activate any relay on the block receiver.Use the keys 0-9 to dial the number and the keys “*” and “#” for the commands YES and NO of the block receiver --> See the Installation Manual of the block receiver. NOTE: The appliance uses a lithium battery type CR123A-S-3V. The removal and the disposal of the battery must have effected before the elimination of the appliance and according to the current Regulations. ATTENTION: - Danger of explosion if the battery is not replaced in the correct way! Replace only with an equal or equivalent type. Battery replacementRemove the cover and extract the old battery from the bottom site of the electronic card with an upward traction. Insert the new battery on the battery location, respecting the right polarity. +-+-LITHIUM CR123AUse of the keypad keys 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 = Normal digits (*) = Corresponding to LEFT Key of a Master transmitter(#) = Corresponding to RIGHT key of a Master transmitter(0) = Corresponding to RIGHT+LEFT simultaneously key of a Master transmitter147*369#2580Right keyLeft keyDuring a dial phase, the key “*” has the functionality of a backspace. It can be used to correct a wrong dialing.Once finished the number dialing, the key “*” goes back to the standard functionality corresponding to the LEFT key of a Master transmitter. The keys “*” and “#” can even be pressed down simultaneously for the corresponding function LEFT+RIGHT of a master IS-TDKDCUK Rev.2 on 5/9/2003RCS-433KP - SEDK2641A4FCC ID : PWJDK433This device complies with FCC Rules Part 15Operation is subject to the following two conditions:1) This device may not cause harmful interferences;2) this device must accept interference that maycause undesired operation.Left key + Right keyMade in ItalyWARNING“Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment”

Navigation menu