C H Systems RF-SDWS-HW Door/window Sensors used by Security System User Manual I RF SDWS MAG HW Rev A Installation Manual

Cinch Systems, Inc Door/window Sensors used by Security System I RF SDWS MAG HW Rev A Installation Manual

User Manual IV

Secure ◄► Simple ◄► State of the Art Installation Instructions Document Number: I-RF-SDWS-MAG-HW Rev. A July 2104 RF-SWDS-MAG-HW Wireless Door/Window Sensor Rev A CINCH Systems, Inc. Page 1 of 3 Part #: RF-SDWS-MAG-HW (Wireless Door/Window Sensor) - Honeywell compatible Product Summary The Wireless Door/Window Sensor is compatible with all Honeywell wireless control panels. The device is surface mounted and equipped with an internal contact and the capability of using an external contact. A cover tamper doubles as an enrollment switch. A tamper-proof sensor reduces the chance of defeating the magnet. Installation: The sensor is designed to mount on the door or window frame and the magnet on the door or window (moving part).
Secure ◄► Simple ◄► State of the Art Installation Instructions Document Number: I-RF-SDWS-MAG-HW Rev. A July 2104 RF-SWDS-MAG-HW Wireless Door/Window Sensor Rev A CINCH Systems, Inc. Page 2 of 3 Wiring: Programming: See control panel installation instructions for programming references. Specifications: Battery: 3VDC, 1.55Ah, CR123A Lithium Battery Typical Battery Life: Up to 14+ Years External Input Sampling Current: 20 µA Switch Type: Magnasphere Open loop Operating Gap: 0.63 in (1.60 cm) Magnet Type: Neodymium Iron Boron (Rare Earth) Supervisory Interval: 64 minutes Wire Run to External Input: 100 feet (30.5 m) Operating Temperature: 14°F (-10°C) to 140°F (60°C) Enclosure: ABS POLYLAC® PA-717C (UL94 HB flame-rating) Weight: 1.6 oz. (51g) Switch Dimensions: 3.2 in (81.3 mm) L x 1.04 in (26.4 mm) W x .96 in (24.4 mm) H Magnet Dimensions: 1.3 in (33 mm) L x 0.5 in (1.27 mm) H x 0.43 in (10.9 mm) W Color: White or Brown

Navigation menu