Building Automation 16963N16964 Temperature and Relative Humidity Sensor User Manual FCC ID M5ZIRPC

Building Automation Products, Inc. Temperature and Relative Humidity Sensor FCC ID M5ZIRPC

Manual

750 North Royal Avenue, Gays Mills, WI 54631 USA Tel: +1-608-735-4800 • Fax: +1-608-735-4804 • E-mail:sales@bapihvac.com • www.bapihvac.com Building Automation Products, Inc. Upgrade to BAPI. 100% Compatible. Guaranteed. Sensors for HVAC/R — Temperature • Humidity • Pressure • Air Quality FCC ID: T4F16963N16964 Installation and Operation Instructions for the Wireless Temperature and Relative Humidity Sensor. Building Automation Products, Inc. Wireless Temperature and Relative Humidity Sensor Installation and Operation Instructions Description The Building Automation Products, Inc. Wireless Temperature and Relative Humidity Sensor, Model BA/BS2-WTHT, is a battery operated, wall mounted sensor with a 418 MHz radio transmitter. The BA/BS2-WTHT is designed to require very little energy; the two internal 3.6 Volt Lithium batteries will operate the sensor for 5 to 8 years in normal operation The BA/BS2-WTHT enclosure is designed to mount directly onto a drywall surface or onto a standard 2”x4” J-box. The enclosure is supplied with a ‘foam-back’ to minimize the effects of wall temperature on the device. The enclosure is also provided with security screws to lock the cover and base together to prevent tampering. The BA/BS2-WTHT has one internal push-button which allows for easy training and identification of the transmitter. The push-button is used when linking the transmitter to any Analog Output Module. See BAPI’s INS/OPS for details. The BA/BS2-WTHT also has an internally mounted LED. The LED will flash briefly when the sensor transmits a data packet using the 418 MHz radio. This happens roughly about once every 10 seconds or shortly after the use of the push-button. WARNING: Changes or modifications not expressly approved by the manufacturer for compliance could void the user’s authority to operate the equipment. FCC ID: T4F16963N16964MADE IN USA THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES, OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESERED OPERATION

Navigation menu