Bryton orporation CA1803 GPS enabled cycling computer User Manual Rider 15 QSG EN

Bryton Incorporation GPS enabled cycling computer Rider 15 QSG EN

Users Manual

A01Quick Start GuideBrytonwww.brytonsport.comDownloadBryton Mobile App
22MENU( )Press to enter/exit menu mode.•Press to be back to main menu.•Long press to clear notication icons.•1Power/OK ( / )•• In free cycling, press to start recording.•• When recording, press to stop recording.133Backlight/Page ( / )In Menu, press to move down to scrollthrough menu options.Press to turn the device on.• •• In Meter mode, press to switch meterscreen page.Please charge your device for at least 4 hours before the first use.To begin 1. Press to turn on the device. 2. Press / to select the unit and press to confirm the selection. 3. Device will automatically search for satellite signals. 4. After GPS signal is fixed *,( → ) just ride on and enjoy your workout in free cycling mode. To record, press to start recording.*To get GPS acquisition, please take the device to an open sky outdoor environment.Getting StartedKey FunctionsPCAt least 4 Hours
Sync Data to / from Bryton AppIt is required to pair your device with Bryton App before syncing data for the first time. 1.Turn on your device. 2.After Bryton App is installed, please sign up a new account or sign in with your Bryton account. 3.Tap "BT Sync” ,and select the device you would like to pair , and tap “+”.4.Tap “Yes” after checking if UUID shown on app is the same as your device’s.5.Your device is successfully paired with Bryton App.6.It would start uploading tracks from paired device.After pairing with Bryton app and simple setup, you can receive phone call, text and email notifications, customize data grid, calibrate altitude and manage other settings. Icon DescriptionReboot DevicePress( / ) at the same time to reboot the device.For firmware update, please go to www.brytonsport.com> (Menu) > Support > Download.For video instructions, please go to www.brytonsport.com> (Menu) > Support > Tutorial.For User Manual, Please go to www.brytonsport.com> (Menu) > Support > Download > Manual > User Manuals.Note:21Weak GPS SignalStrong GPS Signal Bike 1/ Bike 2 Text NotificationDaylight Saving TimeAfternoon12hr or 24 hrGradient Altitude Gain Altitude Loss Distance 1Distance 2Ride TimePower StatusCall NotificationEmail NotificationBacklight Trip TimeMaximumAverage Cadence ValueHeart Rate ValueOdometerDistanceHeart Rate Sensor Speed SensorCadence SensorBluetooth Active RecordingNo GPS Signal(Not fixed)
Item DescriptionDisplay 2" Segment Type HTN LCD Physical Size 71 x 46.2 x 16.5 mmWeight 52gOperating Temperature-10°C ~ 50°CBattery ChargingTemperature0°C ~ 40°CBattery Li polymer rechargeable batteryBattery Life 16 hours with open skyGPS Integrated high-sensitivity GPS receiver with embedded antenna BLE Smart Bluetooth smart wireless technology with embedded antenna Water Resistant Water resistant to a depth of 1 meter for up to 30 minutes.Barometer Equipped with barometer
3Install Rider 15Use Bike Mount to Mount Rider 1 24
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Industry Canada Statement This device complies with Industry Canada RSS-247 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.5 cm between the radiator and your body. Cet équipement est conforme aux CNR-102 d'Industrie Canada. Cet équipement doit êtreinstallé et utilisé avec une distance minimale de 0.5centimètres entre le radiateur et votrecorps. Cet émetteur ne doit pas être co-localisées ou opérant en conjonction avec autreantenne ou émetteur. Les antennes utilisées pour cet émetteur doivent être installés etfournir une distance de séparation d'au moins 0.5 centimètre de toute personne et doit pas être co-située ni fonctionner en conjonction avec une autre antenne ou émetteur.

Navigation menu