Bryton orporation CA1505 GPS enabled cycling computer User Manual 3

Bryton Incorporation GPS enabled cycling computer Users Manual 3

UserManual.wiki >

Bryton orporation >

CA1505 User Manual >

Contents

Users Manual-3

ENGLISHGetting Started 5AccessoriesThe Rider 320 comes with the following accessories: USB cable• Bike mount•Optional items:Heart rate belt• Speed sensor•Cadence sensor•Speed/Cadence Dual sensor•Status IconsIcon Description Icon DescriptionBike Type Heart Rate Sensor Active1Bike 1 Cadence Sensor Active2Bike 2 Speed Sensor ActiveGPS Signal Status Dual Sensor ActiveNo signal (not xed NoticationWeak signal Log Record in ProgressStrong signal Recording is pausedPower Status Bluetooth function is enabledFull battery/Half batteryLow batteryNOTE: Only the active icons are displayed on the screen.•Out-front Bike Mount/- - -

resetGetting Started6Step 1: Charge your Rider 320Connect Rider 320 to a PC to charge the battery for at least 4 hours.Unplug the device when it is fully charged.Step 2: Turn On Rider 320Press and hold to turn on the device.Step 3: Initial SetupWhen turning Rider 32 instructions to complete setup.1. Select the display language.2. Read and accept the Safety Agreement.* You may see a white screen when the battery is really low. Keep the device plugged for several minutes, it will automatically turn-on after battery is properly charged.

ENGLISHGetting Started 7Step 4: Acquire Satellite SignalsOnce the Rider 320 is turned on, it will automatically search for satellite signals. It may take 30 to 60 seconds to acquire signals. Please make sure you acquire the satellite signal for the The GPS signal icon ( /• icon appears on the screen.• Tunnels Inside rooms, building, or undergroundUnder water High-voltage wires or television towersConstruction sites and heavy Step 5: Ride Your Bike with Rider 320Free ride:• In meter view, measurement starts and stops automatically in sync with the movementof the bicycle. Start an exercise and record your data:• In meter view, press to start recording, press to pause, press again to stop.Start a training:• Select Train from the menu list. Training can be based on time, distance, calories burn, or the saved workouts.Reset Rider 320To reset the Rider 320, long press all three keys ( / / ) at the same time.

Getting Started8Share Your RecordsDownload Bryton Update ToolShare Your RecordsDownload Bryton Update ToolNOTE: Bryton Update Tool can notify you if a new software version or GPS data is available. The newer GPS data can speed up the GPS acquisition. We highly recommend you to check for updates every 1-2 weeks.1. Go to http://www.brytonsport.com/help/start and download Bryton Update Tool.2. Follow the on-screen instructions to install Bryton Update Tool.Share Your Tracks to Brytonsport.com1. Sign up/log in on Brytonsport.coma. Go to http://www.brytonsport.com/help/start.b. Register a new account or use your current Bryton account to log in.NOTE: Bryton account is the email address used to register as a member of brytonsport.com.2. Connect to PCTurn on your Rider 320 and connect it to your computer by using USB cable.3. Share Your Recordsa. Go to http://www.brytonsport.com/help/landing. Click “Upload Files” button. Then, click “Select from Files”.b. Choose to save as “History”. Then, click “Select and Upload file”.c. Select FIT files fom Bryton folder in the device.

Training9Train & TestBicycling is one of the best types of exercise for your body. It helps you to burn your calories, 320 Training feature, you can set simple workouts and use the Rider 320 to track your training or workout progress.1. In the main screen, press to select Train&Test.2. Press to enter the Training menu.08:08 09/09CyclingTrain & Test View HistorySettingsTo PlanYou can set simple workouts by entering your time or distance goals. The Rider 32Simple1. To set a simple workout, selectTo Plan > Simple > Warm Up, Work , Cooldown. 2. Press / to set your time and press 3. Choose Save and enter the workout name using the on-screen keyboard. 4. Go for a ride.Go to Train & Test > My Workouts > View and choose the save workout. Press to start training and record log. 6’ 0” 159 ~17110’ 94 ~11110’ 94 ~111WorkWarm UpCooldwnSimple• Warm Up :Duration (manual, calorie,time, distance), Target (HR, MHR, LTHR).• Work :Duration (calorie, time,distance), Target (MHR%, LTHR%, HR, MHR, LTHR, OFF).• Cooldown :Duration (manual, calorie,time, distance), Target (HR, MHR, LTHR).to confirm.

ENGLISHTraining 10Using the On-screen KeyboardNameSave001 ENDNameSave001 A1. Press / to select the input character.Select • DEL to erase the data.2. Press s / to select END and press NOTE:name according to the current date and time.My WorkoutWith My Workout feature, you can start your workout using the training plan that you have saved in To Plan menu. 1. In the Training menu, press to select My Workout and press . 2. Press to select View and press to enter its submenu.Press • to select your desired training plan and press Go for a ride.• Press to start training and record log.3. To choose which workouts to delete, select Delete. 4. To delete all workouts to delete, select Delete All. ViewDeleteDelete AllMy Workout

Training11NOTE: If the selected workout includes several interval settings, a workout details appear on the screen. Select Start and press to proceed with the workout.Stop TrainingYou can stop the current training after you have reached your goal or when you decide to end the current training./1 1 / 1 1 rpm1. Press to pause the recording and press again to stop the recording. 2. A “Do you want to stop?” message appears on the screen. To stop the current training, press / to select Yes and press View Exercise/Training RecordUse View History to view or delete your exercise/training history. To view your history:1. In the main screen, press to select View History > View and press . 2. Press to select View and press to 3. Press to select a training history from the list and press to view your history.NOTE: You can also upload your history to brytonsport.com to keep track of all your ride data. SummaryViewDelete AllDeleteHistoryDo you wantto stop?Yes

ENGLISHTraining 12To delete your history:1. In the main screen, press to select View History > View and press . 2. Press to select Delete and press to enter the history list.3. Press to select a training history from the list and press to delete the selected history.4. A “Do you want to delete?” message appears on the screen. To delete the data, press / to select Yes and press DeleteDo you want to delete?YesHistory Flow09/19 21:4400:03:08 trip3.69 km39 kcal04 laps1/20More00:02:25 rideAVG MAX75.6 kmh39 bpm19 rpm75.63919Lap 01 00:490.25 km81.4 kmh13 kcal0bpm0rpmtrip = Trip TimeThe arrow appears only when there is lap in this record.Record#/Total records The arrow appears only when there are more than 1 lap.

Settings13SettingsWith the Settings feature, you can customize exercises settings, altitude, general settings,sensor settings, bike and user prExercisesAltitudeGeneralSensorsSettings1. In the main screen, press to select Settings.2. Press to enter the Settings menu.Smart LapWith Smarte.Lap by LocationBy LocationUse currentlocation aslap location?Yes1. In the Settings menu, press to select Exercises> Smart Lap and press . 2. Press to enter the editing menu. 3. A “Use current location as lap location?” message appears on the screen. To save the data, press to select Yes and press 4. Press to exit this menu.NOTE:appears on the screen. Check if the GPS is on and make sure you step outside to acquire the signal./Press to select and press Location to confirm.

ENGLISHSettings 14AltitudeYou can set the altitude setting for the current location and four other locations.Current Altitude1. In the Settings menu, press to select Altitude > Altitude and press . 2. Press / to adjust the desired altitude and press setting.3. Press to exit this menu. Lap by DistanceAltitudeM31By DistanceKM10.01. In the Settings menu, press to select Exercise > Smart Lap and press . 2. Press to enter the editing menu. Press 3. Press / to select your desired distance and press 4. Press to exit this menu./ to select and press Distance

Ride TimeCurrent TimeTrip TimeCurrentTimeCurrentSpeedTotalDistanceData PageSettings15Other Location Altitude1. In the Settings menu, press to select Altitude > Location 1, Location 2, Location 3, or Location 4 and press . 2. To set the altitude, press to select Altitude and press 3. Press / to adjust the desired altitude and press setting.4. To calibrate the set altitude, press to select Calibrate and press to 5. Press to exit this menu.Location 1Altitude10mCalibrateData PageYou can set the display settings for the Meter, Lap, and Auto Switch. You can also set the Auto Switch interval setting.Meter Display3-grid display Item selection1. In the Settings menu, press to select Exercises > Data Page > Data Page 1, Data Page 2 and press . 2. Press /or Data Page 3

ENGLISHSettings 163. Press the selection.4. Press / to select the desired setting and press 5. Press to exit this menu.NOTE: selection.2-grid display 3-grid displayLap Display1. In the Settings menu, press to select Exercises > Data Page > Data Page 1 or Data Page 2 and press . 2. Press / to select the number of 3. Press you want to customize, and press to 4. Press / to select the desired setting and press 5. Press to exit this menu.Cycle LapData Page 1OnOnData Page 2

Settings17Auto Scroll1. In the Settings menu, press to select General> Auto scroll and press . 2. Press to select the setting that you want to change and press to enter its submenu.Auto scroll: enable/disable the auto • switch.Interval: set the interval time.• 3. Press / to adjust the desired setting and press 4. Press to exit this menu.Auto scrollAuto scrollOn5 secIntervalSensorsYou can customize the respective sensor settings such as enable/disable the function or rescan the sensor for the device.Heart RateTurn OffStatus: activeID XXXXXXXXXRescanHeart RateSpeedTurn OffStatus: activeID XXXXXXXXXRescanCadenceTurn OffStatus: activeID XXXXXXXXXRescanSpeed Cadence Power meterTurn OffStatus: activeID XXXXXXXXXRescan Power meter Speed/CADTurn OffStatus: activeID XXXXXXXXXRescanSpeed/Cadence

ENGLISHSettings 181. In the Settings menu, press to select Sensors > Heart Rate, Speed, Cadence, or Speed/CAD Power Meter and press . 2. Press to have more options. Press to select the desired setting and press Rescan: rescan to detect the sensor. • • 3. Press to exit this menu.NOTE: When the heart rate monitor is paired, the • heart rate icon appears on the main screen.While pairing your speed/cadence sensor/the heart rate belt and power meter, please make sure there is no other cadence/speed sensor/power meter within 5 m. When the cadence sensor is paired, the cadence sensor icon appears on the main screen.BluetoothEnable BluetoothBefore pairing Rider 320 with your bluetooth enabled mobile phone, make sure the bluetooth function of your mobile phone and Rider 320 is turned on.1. In the Settings menu, press to select General > Bluetooth and press .2. Press / to select On and press 3. Press to exit this menu.EnableOn,

Birthday : set your Birthday Settings19You can change your personal information.UserGenderBirthdayMale1982/01/01Height177 cm1. In the Settings menu, press to select User and press . 2. Press to select the setting that you want to change and press to enter its submenu.Gender: select your gender.• • Height: set your height. • Weight: set your weight.• Max HR: set your maximum heart rate. • LTHR: set your lactate threshold heart • rate.FTP: set your functional threshold • power.MAP: set your maximum aerobic • power.3. Press / to adjust the desired setting and press 4. Press to exit this menu.

Settings21Change System SettingsYou can customize the device system settings such as backlight o, key tone, sound, time/unit , on-screen display language.Backlight OBack lightAutoNever1 min10 min1. In the Settings menu, press to select General > System > Backlight O and press . 2. Press / to select the desired setting and press to conrm.3. Press to exit this menu.Key ToneKey ToneOnOff1. In the Settings menu, press to select General > System > Key Tone and press . 2. Press / to select the desired setting and press to conrm.3. Press to exit this menu.

ENGLISHSettings22Sound6RXQGOnOff1. In the Settings menu, press to select General > System > Sound and press . 2. Press / to select the desired setting and press to conrm.3. Press to exit this menu.Time/UnitDlight Save+0:00+1:00Daylight SaveDatemmddyyyyyyyymmddddmmyyyyDate formatTime12hr24hrTime formatUnit.0.*0,/%Unit1. In the Settings menu, press to select General > System > Time/Unit > DaylightSave, Date format , Time format, UnitTemperature and press . 2. Press / to select the desired setting/format and press to conrm.3. Press to exit this menu., or

Settings23LanguageLanguageEnglishDeutschFrançais1. In the Settings menu, press to select General > System > Language and press .2. Press / to select the desired setting and press 3. Press to exit this menu.View GPS StatusYou can view the GPS signal information that your device is currently receiving. 1. In the Settings menu, press to select General > GPS and press . 2. To set the signal search mode, press 3. Press / to select the desired setting and press • this to save power when GPS signal is not available, or when GPS information is not required (such as indoor use). Full Power: maximum position and • speed accuracy, consumes more power.PowerSaving: Achieves longer battery • life when used in good GPS signal condition, but less accurate.GPSPowerSaveFull PowerOff

ENGLISHSettings24View Software VersionYou can view your device current software version. 1. In the Settings menu, press to select General > About. 2. Press to conrm. The current software version is displayed on the screen.3. Press to exit this menu.

Appendix25AppendixSpecicationsRider 320Item DescriptionDisplay 1.8" FSTN positive transective dot-matrix LCDPhysical Size 45.1 x 71.9 x 17.3 mmWeight 54gOperating Temperature-10°C ~ 50°CBattery ChargingTemperature0°C ~ 40°CBattery Li polymer rechargeable batteryBattery Life 20 hours with open skyGPSIntegrated high-sensitivity GPS receiver with embedded antennaRF Transceiver2.4GMHz receiver with embedded antenna to support ANT+ heart rate, speed sensor, cadence sensor Water Resistant IPX7 waterproof ratingCadence SensorItem DescriptionPhysical size33.9 x 13.5 x 39 mmWeight 14 gWater Resistance IPX7Transmission range 5 mBattery life 1 hour per day for 16 monthsOperating temperature -10oC ~ 60oCRadio frequency/protocol 2.4GHz / Dynastream ANT+ Sport wireless communications protocolAccuracy may be degraded by poor sensor contact, electrical interference, and receiver distance from the transmitter. BLE Smart Bluetooth smart wireless technology with embedded antenna

ENGLISHAppendix26Heart Rate MonitorItem DescriptionPhysical size 67~100 x 26 x 15 mmWeight 14 g (sensor) / 35g (strap)Water Resistance 20 mTransmission range 5 mBattery life 1 hour per day for 24 monthsOperating temperature 5oC ~ 40oCRadio frequency/protocol 2.4GHz / Dynastream ANT+ Sport wireless communications protocolAccuracy may be degraded by poor sensor contact, electrical interference, and receiver distance from the transmitter.Battery InformationHeart Rate Monitor and Cadence Sensor BatteryThe heart rate monitor/cadence sensor contains a user-replaceable CR2032 battery. To replace the battery:1. Locate the circular battery cover on the back of the heart rate monitor/cadence sensor.2. Use a coin to twist the cover counter-clockwise so the arrow on the cover points to OPEN.3. Remove the cover and battery. Wait for 30 seconds. 4. Insert the new battery, with the positive connector rst into the battery chamber.5. Use a coin to twist the cover clockwise so the arrow on the cover points to CLOSE.ABNOTE: When installing a new battery, if the battery is not placed with the positive connector •rst, the positive connector will easily deform and malfunction.Be careful not to damage or lose the O-ring gasket on the cover.•Contact your local waste disposal department to properly dispose of used batteries.•ACLOSEOPENB

Appendix27Install Rider 320Mount Rider 320 to the Bike31 21 24