Broadcom BRCM1032 Bluetooth Transceiver Module User Manual

Broadcom Corporation Bluetooth Transceiver Module

Contents

Users manual

12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  1/36 TAIYO YUDEN   EYTFEBS         Bluetooth® Module    EYTFEBS  User Guide                         The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by TAIYO YUDEN CO., LTD. is under license.  In case you adopt this module and design some appliance, please ask for the latest specifications from the local sales office. We wish the customer to request the Specification Report when the design for the mass production begins because the content of this Data Report might change without a previous notice to the customer.
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  2/36 TAIYO YUDEN   EYTFEBS Document constituent list Control name  Control No.  Document Page General Items  HD-AG-A071113  1/3 – 3/3 Absolute maximum ratings  HD-AM-A071113  1/1 Electrical characteristics  HD-AE-A071113  1/3- 3/3 Electrical characteristics  HD-AE-B071113  1/2 - 2/2 Electrical characteristics  HD-AE-C071113  1/10 - 10/10   Electrical characteristics  HD-AE-D071113  1/11- 11/11   Circuit schematic  HD-MC-A071113  1/1 Outline / Appearance  HD-AD-A071113  1/1 Outline / Appearance  HD-AD-B071113  1/1 Pin Layout  HD-BA-A071113  1/1    Rev. record 12-Sep.-2007> Ver.0.1 Draft
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  3/36 TAIYO YUDEN   EYTFEBS Control No. HD-AG-A071113                (1/3) Control name General Items Scope This specification (“Specification”) applies to the hybrid IC “EYTFEBS” for use Bluetooth® module (“Product”) manufacture by TAIYO YUDEN Co., Ltd. (“TAIYO YUDEN”)  1. Regulatory Model Name : EYTFEBS 2. Function: Radio frequency transfer Module (power class 2). Bluetooth® standard Ver 2.1+EDR conformity 3. Application: PC, PC peripheral, Handy terminal 4. Structure: Hybrid IC loaded with silicon monolithic semiconductor 5. Outline: Cable Connector Type 6. Marking: TBD                                                                           7. Features: -Bluetooth® 2.1+EDR conformity -USB Interface -Point-to-Multipoint (7 Slaves) -Encryption -Hold, Sniff and Park Mode -Supported Link Type: ACL   -AFH&Co-existence -EDR(Enhanced Data Rate) 8. Packing:TBD     9. Terminal: Data input-output (10pin Cable Connector)                          “J.S.T.Mfg.Co.,Ltd. : SM10B-SSR-H-TB(LF)(SN)” RF input-output (Antenna) 10. Mount: TBD 11. Notes:   a. Any question arising from this Specification shall be solved through mutual discussion by the parties       hereof. b. This Product is not designed for radiation durable and should not be used under the circumstance of radiation.
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  4/36 TAIYO YUDEN   EYTFEBS Control No. HD-AG-A071113                 (2/3) Control name General Items  c. The operating conditions of this Product are as shown in this Specification. Please note that TAIYO YUDEN shall not be liable for a failure and/or abnormality which is caused by use under the conditions other than the operating conditions hereof. d. This Product mentioned in this Specification is manufactured for use in PC, PC peripheral and Handy terminal. Before using this Product in any special equipment (such as medical equipment, space equipment, air craft, disaster prevention equipment), where higher safety and reliability are duly required, the applicability and suitability of this Product must be fully evaluated by the customer at its sole risk to ensure correct and safety operation of those special equipments. Also, evaluation of the safety function of this Product even for use in general electronics equipment shall be thoroughly made and when necessary, a protective circuit shall be added in design stage, all at the customer’s sole risk. e. TAIYO YUDEN warrants only that this Product is in conformity with this Specification for one year after purchase and shall in no event give any other warranty. f. The warranty period shall be one year. g. Communication between this Product and others might not be established nor maintained depending upon radio environment or operating conditions of this Product and other Bluetooth® products. h. This Product is designed for use in products which comply with Bluetooth® Specifications (Ver 2.1+EDR) (“Bluetooth Specifications”). TAIYO YUDEN disclaims and is not responsible for any liability concerning infringement by this Product under any intellectual property right owned by third party in case the customer uses this Product in any product which does not comply with Bluetooth Specifications (the “non-complying products”). Furthermore, TAIYO YUDEN warrants only that this Product complies with this Specification and does not grant any other warranty including warranty for application of the non-complying products. i. TAIYO YUDEN dose not render updating or upgrading service for the firmware in the Module. j. In order to take tests for getting the certification of each country’s Radio Law with a device incorporating this module, it is necessary to make the software in Host to put the module into test condition. Please contact TAIYO YUDEN for farther details. k. Please evaluate adequately our module incorporated to your products before mass production. l. This Product operates in the unlicensed ISM band at 2.4GHz. In case this Product is used around the other wireless devices which operate in same frequency band of this Product, there is a possibility that   interference occurs between this Product and such other devices. If such interference occurs, please stop the operation of other devices or relocate this Product before using this Product or do not use this   Product around the other wireless devices. m. User’s Code Modification Notice (Bluetooth® Modules) User’s Code may be modified based on mass production stage, Bluetooth® logo Qualification stage, or other related stages. Please contact TAIYO YUDEN to confirm whether your User’s Code needs to be modified. Please see the following examples for cases that User’s Code are modified:           - for specific firmware version (our standard item firmware will be upgraded occasionally)           - for specific BD address (our standard item BD address is owned by TAIYO YUDEN )           - for specific PnP (Plug and Play) IDs (our standard item PnP IDs are owned by TAIYO YUDEN or chip manufacture) EYTFEBS Setting: USB Product ID: 0x0200, USB Vendor ID: 0x0930 - for other related cases (specific or different setting, form, sizes, or display etc..) In case you have applied for Bluetooth® Qualification with our standard User’s Code without previous notice to TAIYO YUDEN, we shall not be responsible for any expense that will be required to change its name/number.
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  5/36 TAIYO YUDEN   EYTFEBS Control No. HD-AG-A071113                 (3/3) Control name General Items n. Containment of hazardous substance in this Product * This product conforms to RoHS Directive (2002/95/EC).     p. In addition when this Product is used under environmental conditions such as over voltage which   are not guaranteed ,it may be destroyed in short mode. To ensure the security of customer’s product,   please add an extra fuse or/and a protection circuit for over voltage.  q. In some cases, TAIYO YUDEN may use replacements as component parts of Products. Such replacement shall apply only to component part of Products, which TAIYO YUDEN deems it possible to replace or substitute according to (i) Scope provided in this Specification (e.g. Official Standard (Type Approvals, Bluetooth LOGO etc.)) and (ii) Quality of Products. TAIYO YUDEN also ensures traceability of such replacement on production lot basis.  r. Do not alter Hardware and/or Software of this Product.         Please note that TAIYO YUDEN shall not be liable for any problem if it is caused by customer's                     alteration of Hardware or/and Software without Taiyo Yuden's prior approvals.                         This module is still under development, thus specifications do not guarantee both the quality and reliability at the time of shipment. Since the specifications and mass production of the module are not confirmed either, the contents of the technical notes are subject to change without any prior notice.
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  6/36 TAIYO YUDEN   EYTFEBS Control No. HD-AM-A 071113              (1/1) Control name Absolute maximum ratings  Absolute maximum ratings Rating Item Symbol Min. Typ. Max.  Unit  Remark Supply voltage  VDD_3.3V -0.3    3.6  V  Ta=25 degrees C, GND reference Input voltage  Vin  -0.3    VDD_3.3V +0.3  V  I/O terminals except USB interface   Recommendation operating range Rating Item Symbol Min. Typ. Max.  Unit  Remark Supply voltage  VDD_3.3V  3.15  3.3  3.45  V   Supply voltage ripple and spike noise  VDD_rn    TBD mVp-p Note 1 Operation temperature range  Topr 0 25 70 Degrees C Humidity=40%RHNote 2 Storage temperature range  Tstg -30 25 85 Degrees C Humidity=40%RHNote 3  Notes: 1.    To fill the standard of “Supply voltage ripple and spike noise”, the capacitor, which   has the capacity of TBD uF or more , should be put in the terminal VDD_3.3V outside as a bypass capacitor . 2.      Operating temperature range is set to satisfy products electrical characteristics in the short term.       In terms of product life cycle when it is used in condition of varying from TYP standard in the long   term, please refer to the reliability condition. 3.      Storage temperature range is the condition for transportation and storage in temporary.
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  7/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-A071113               (1/3) Control name Electrical characteristics Electrical characteristic  DC Specifications The Specification applies for Topr.= 25 degrees C, VDD_3.3V=3.3V No. Parameter  Condition  Symbol Min.  Typ. Max. Unit Remark 1  Normal supply voltage  VDD_3.3V  3.15 3.3 3.45 V  2  Input Low Voltage1  /RESET, PIOX  VIL1 0    0.8  V   3  Input Low Voltage2  USB_D+, USB_D-  VIL2 -    0.8  V   4  Input High Voltage1  /RESET, PIOX  VIH1 2.0    VDD_3.3V  V   5  Input High Voltage2  USB_D+, USB_D-  VIH2 2.0    -  V   6 Output Low Voltage1  PIOX  VOL1 -  0.4 V Iout=2mA 7 Output Low Voltage2  USB_D+, USB_D-  VOL2 -    0.3  V   8 Output High Voltage1  PIOX  VOH1 VDD_3.3V-0.4   - V Iout =-2mA 9  Output High voltage2  USB_D+, USB_D-  VOH2 2.8    -  V   10  Peak current  Continuous Rx  Iccp1   (60)  (180)  mA Notes 3, 4 11  Average current1  Sniff mode (Slave only)  Icca1   TBD - mA Notes 1, 3, 4 12  Average current2  Standby mode  Icca2   TBD - mA Notes 3, 4 13  Average current3  Send DM1packet (Master) Icca3   TBD - mA Notes 3, 4 14  Average current4  Receive DM1packet (Slave) Icca4   TBD - mA Notes 3, 4 15  Average current5  Hold mode (Slave only)  Icca5   TBD - mA Notes 3, 4 16  Average current6  Park mode (Slave only)  Icca6   TBD - mA Notes 2, 3, 4  Notes: 1. Sniff mode parameter.   Max interval  0050h Min interval    0010h Attempt     0005h Timeout     0005h 2. Park mode parameter.    Max interval  0100h                          Min interval  0010h 3. The consumption current might fluctuate with the condition of radio communication, host performance and test circuit. 4. The value may fluctuate several (mA) depending on Firmware version.
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  8/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-A071113               (2/3) Control name Electrical characteristics AC Specifications The Specification applies for Topr.= 25 degrees C, VDD_3.3V=3.3V No. Parameter  Condition Symbol Min Typ Max Unit Remark 1  VDD_3.3V Rise Time from 0V to 3.15V   t1 0  TBD ms  2  VDD_3.3V= 3.15V to /RESET High    t2  0      ms  3  /RESET High to Module Ready    t3    TBD    ms Note 1 4  /RESET Pulse Width    t4  4      us   5  Radio_Disable High to USB I/F High-Z   t5   TBD ms  6  Radio_Disable Low to USB I/F Active   t6 0  TBD ms  7  /RESET Low to USB_I/F High-Z    t7  0    TBD  ms  8  Module Active to /RESET Low    t8  0      ms  9  /RESET Low to VDD_3.3V Off    t9  0      ms  10  Radio_Disable Low to VDD_3.3V Off   t10  0    ms  Notes:  1. It may change due to the firmware version.
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  9/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-A071113               (3/3) Control name Electrical characteristics   Radio_DisableVDD_3.3V/RESETUSB_I/F(Note 1)Timing Diagram for Power Up Sequencet1t2t4t3Activet8 t7Active Activet5 t6   Timing Diagram for Power Down SequenceVDD_3.3V/RESET(Note 1)USB_I/FRadio_DisableActivet9t10
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  10/36 TAIYO YUDEN   EYTFEBS RF Specifications at Basic Rate The Specification applies for Ta=25 degrees C, VDD_3.3V=3.3V No. Parameter  Condition  Symbol Min  Typ  Max  Unit  Remark 1 Frequency band    FREQ 2400   2483.5 MHz  2 Tx power    PO  -6  0  +4  dBm  3  Modulation characteristics 1  dF1: F0(11110000)  M1  140    175  kHz   4  Modulation characteristics 2  dF2: AA(10101010)  M4  115      kHz   5  Modulation characteristics 3  dF2/dF1 MC 0.8     6  In-band spurious emission 2  2MHz(|M-N|=2) ISE1     -20 dBm  7  In-band spurious emission 3 3MHz or greater (|M-N|>=3)  ISE2     -40  dBm  8  Initial Carrier   Frequency   ICF -75  +75 kHz  9  Frequency Drift 1  DH1  FD1  -25    +25  kHz   10  Frequency Drift 2  DH3,DH5  FD2  -40    +40  kHz   11 Drift rate  DH1,DH3,DH5  DR      400  Hz/us  12 C/I co-channel    CIC      11  dB  -60dBm 13 C/I 1MHz    CI1      0  dB  -60dBm 14 C/I 2MHz    CI2      -30  dB  -60dBm 15 C/I >= 3MHz    CI3      -40  dB  -67dBm 16 C/I Image    CI4      -9  dB -3MHz offset -67dBm 17  C/I Image +/- 1MHz    CI5      -20  dB  -67dBm 18  Out-of-Band Blocking 1 30MHz to 2000MHzf=2460MHz  OBB1   -10 dBm BER<=0.1% 19  Out-of-Band Blocking 2 2000 to 2399MHz f=2460MHz  OBB2   -27 dBm BER<=0.1% 20  Out-of-Band Blocking 3 2484 to 3000MHz f=2460MHz  OBB3   -27 dBm BER<=0.1% 21  Out-of-Band Blocking 4 3000MHz to 12.75GHz  f=2460MHz OBB4   -10 dBm BER<=0.1% 22  Maximum Input Level   MAXP -20   dBm BER<=0.1% 23 20dB Bandwidth    B20      1  MHz  24 Sensitivity-single  DH1  SEN1     -70  dBm BER<=0.1% 25 Sensitivity-multi  DH3,DH5  SEN2     -70  dBm BER<=0.1%     Control No. HD-AE-B071113                   (1/2) Control name Electrical characteristics
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  11/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-B071113                   (2/2) Control name Electrical characteristics  RF Specifications at EDR The Specification applies for Ta=25 degrees C, VDD_3.3V =3.3V No. Parameter  Condition  Symbol Min  Typ Max  Unit  Remark 1 RMS DEVM 1  Pai/4DQPSK  RDE1      0.20      2 RMS DEVM 2  8DPSK  RDE2      0.13     3 Peak DEVM 1  Pai/4DQPSK  PDE1      0.35      4 Peak DEVM 2  8DPSK  PDE2      0.25     5  99% DEVM 1  Pai/4DQPSK  D991      0.30       6  99% DEVM 2  8DPSK  D992      0.20     7  EDR In-band spurious emission 1  |M-N|=1  EISE1 26         dB   8  EDR In-band spurious emission 2  |M-N|=2 EISE2   -20 dBm  9  EDR In-band spurious emission 3  |M-N|=3 EISE3   -40 dBm  10  EDR Initial Carrier   Frequency    EICF -75  +75 kHz  11 EDR Drift     ED  -10    +10  kHz  12  Relative transmit power  PDPSK RTP PGFSK-4   PGFSK+1  dB  13  Actual Sensitivity Level 2-DH5(3-DH5) 16000000bit  ESEN    -70 dBm BER= 10-414  BER Floor Performance 2-DH5(3-DH5) 160000000bit  FSEN    -60 dBm BER= 10-515 C/I co-channel  2-DH5  2CIC      13  dB -60dBm 16 C/I 1MHz  2-DH5  2CI1      0  dB -60dBm 17 C/I 2MHz  2-DH5  2CI2      -30  dB -60dBm 18 C/I >= 3MHz  2-DH5  2CI3      -40  dB  -67dBm 19 C/I Image  2-DH5  2CI4      -7  dB -67dBm -3MHz offset 20  C/I Image +/- 1MHz  2-DH5  2CI5      -20  dB  -67dBm 21 C/I co-channel  3-DH5  3CIC      21  dB -60dBm 22 C/I 1MHz  3-DH5  3CI1      5  dB -60dBm 23 C/I 2MHz  3-DH5  3CI2      -25  dB -60dBm 24 C/I >= 3MHz  3-DH5  3CI3      -33  dB  -67dBm 25 C/I Image  3-DH5  3CI4      0  dB -67dBm -3MHz offset 26  C/I Image +/- 1MHz  3-DH5  3CI5      -13  dB  -67dBm 27  Maximum Input Level  2-DH5(3-DH5)  EMAXP  -20    dBm   Note:   Bluetooth® standard Ver 2.1+EDR conformity
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  12/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-C071113                 (1/10) Control name Electrical characteristics Supported HCI Commands / HCI Events The  Bluetooth® functions of this module are as written in the attached PICS. Depending on firmware version Upgrade, the Bluetooth® functions are subject to change without notice.  HCI COMMAND LIST                                                     Command Description OpCode Group (Hex) Command (Hex)  Parameters Returns  Status Notes LINK CONTROL Inquiry LAP Inquiry Length HCI _Inquiry  0x0401  1  1 Num Responses  Yes   HCI _ Inquiry_ Cancel  0x0402  1  2    Status  Yes   Max Period Length Min Period Length LAP Inquiry Length HCI_ Periodic_ Inquiry _Mode  0x0403  1  3 Num Responses Status Yes  HCI _Exit _Periodic _Inquiry _Mode  0x0404 1  4    Status  Yes    Connection Management BD ADDR Packet Type Page Scan Repetition ModeReserved Clock Offset HCI _Create_ Connection  0x0405  1  5 Allow Role Switch  Yes   Connection Handle Reason HCI _Disconnect  0x0406  1  6 Packet Type  Yes   Status HCI _Create _Connection _Cancel  0x0408  1  8  BD ADDR  BD ADDR  Yes   BD ADDR HCI _Accept _Connection _Request  0x0409  1  9  Role   Yes   BD ADDR HCI _Reject _Connection _Request  0x040A  1  A  Reason   Yes   Connection Handle HCI _Change _Connection _Packet_Type  0x040F 1  F  Packet Type   Yes   Connection Handle Transmit Bandwidth Receive Bandwidth Max Latency Voice Setting Retransmission Effort HCI _Setup _Synchronous _Connection  0x0428 1  28 Packet Type  Yes   BD ADDR Transmit Bandwidth Receive Bandwidth Max Latency Content Format Retransmission Effort HCI _Accept _Synchronous _Connection _Request  0x0429 1  29 Packet Type  Yes   HCI _Reject _Synchronous _Connection _Request  0x042A 1  2A  BD ADDR    Yes
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  13/36 TAIYO YUDEN   EYTFEBS   HCI_Write_Default_Erroneous_Data_ Reporting  0x0C5B 3  5B  Erroneous_Data_Reporting Status  Yes   Status HCI_Read_Default_Erroneous_Data_ Reporting  0x0C5A 3  5A    Erroneous_Data_ Reporting Yes    Authentication / Pairing BD ADDR  Status HCI _Link _Key _Request _Reply  0x040B  1  B  Link Key  BD ADDR  Yes   Status HCI _Link _Key _Request _Negative _Reply  0x040C 1  C  BD ADDR  BD ADDR  Ye s  BD ADDR  Status PIN Code Length  BD ADDR HCI _PIN _Code _Request _Reply  0x040D  1  D PIN Code   Yes   Status HCI _PIN _Code _Request _Negative _Reply  0x040E 1  E  BD ADDR  BD ADDR  Yes  HCI _Authentication _Requested 0x0411 1  11  Connection Handle  Yes  HCI _Change _Connection _Link _Key  0x0415 1  15  Connection Handle    Yes   BD ADDR  Status IO_Capability BD ADDR OOB_Data_Present    HCI_IO_Capability_Request_Reply 0x042B 1  2B Authentication_ Requirements   Yes   Status HCI_User_Confirmation_Request_ Reply  0x042C 1  2C  BD ADDR  BD ADDR  Yes  Status HCI_User_Confirmation_Request_ Negative_Reply  0x042D 1  2D  BD ADDR  BD ADDR  Yes  BD ADDR  Status HCI_User_Passkey_Request_Reply 0x042E 1  2E  Numeric_Value BD ADDR  Ye s  Status BD ADDR HCI_User_Passkey_Request_ Negative_Reply  0x042F 1  2F  BD ADDR BD ADDR Yes   Status C  (Hash C) HCI_Read_Local_OOB_Data 0x0C57 3 57   R  (Randomizer R) Yes   HCI_Write_Simple_Pairing_mode 0x0C56 3 56  Simple_Pairing_Mode Status  Yes  Status HCI_Read_Simple_Pairing_mode 0x0C55 3  55    Simple_Pairing_Mode  Yes   HCI_Refresh_Encryption_Key 0x0C53 3 53  Connection_Handle  Status  Yes   Encryption Connection Handle HCI _Set _Connection _Encryption  0x0413  1  13  Encryption Enable   Yes   HCI _Master _Link _Key  0x0417  1  17  Key Flag    Yes    Remote Information BD ADDR Page Scan Repetition ModePage Scan Mode HCI _Remote _Name_ Request  0x0419  1  19 Clock Offset  Yes   Status HCI _Remote _Name _Request _Cancel  0x041A 1  1A  BD_ADDR  BD_ADDR  Yes   HCI _Read _Remote _Supported _Features  0x041B 1  1B  Connection Handle    Yes   Connection Handle HCI _Read _Remote _Extended _Features  0x041C 1  1C  Page_Number   Yes   Control No. HD-AE-C071113                (2/10) Control name Electrical characteristics
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  14/36 TAIYO YUDEN   EYTFEBS  HCI _Read _Remote _Version _Information  0x041D 1  1D  Connection Handle    Yes   HCI _Read _Clock _Offset  0x041F  1  1F  Connection Handle    Yes   Status Connection Handle LMP_Handle HCI _Read _LMP _Handle  0x0420  1  20  Connection Handle Reseved Yes   BD ADDR  Status C  (Hash C)  BD ADDR HCI_Remote_OOB_Data_Request_ Reply  0x0430 1  30 R  (Randomizer R)   Yes    HCI_Remote_OOB_Data_Request_ Negative_Reply  0x0433 1  33  BD ADDR  Status  Yes     LINK POLICY Connection Handle Hold Mode Max Interval HCI _Hold _Mode  0x0801  2  1 Hold Mode Min Internal  Yes   Connection Handle Sniff Max Interval Sniff Min Interval Sniff Attempt HCI _Sniff _Mode  0x0803  2  3 Sniff Timeout  Yes   HCI _Exit _Sniff _Mode  0x0804  2  4  Connection Handle    Yes   Connection Handle Beacon Max Interval HCI _Park _State  0x0805  2  5 Beacon Min Interval  Yes   HCI _Exit _Park _State  0x0806  2  6  Connection Handle    Yes   Connection Handle Flags Service Type Token Rate Peak Bandwidth Latency HCI _QoS _Setup  0x0807  2  7 Delay Variation  Yes   Status Connection Handle HCI _Role _Discovery  0x0809  2  9  Connection Handle Current Role Yes   BD ADDR HCI _Switch _Role  0x080B  2  B  Role   Yes   States Connection Handle HCI _Read _Link _Policy _Settings  0x080C 2  C  Connection Handle Link Policy Settings Yes   Connection Handle  States HCI _Write _Link _Policy _Settings  0x080D 2  D  Link Policy settings  Connection Handle  Yes  Status HCI _Read _Default _Link _Policy_Settings  0x080E 2  E    Default Link Policy Settings Yes   HCI _Write _Default _Link _Policy_Settings  0x080F 2  F  Default Link Policy Settings  Status Yes      Control No. HD-AE-C071113              (3/10) Control name Electrical characteristics
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  15/36 TAIYO YUDEN   EYTFEBS  Connection Handle Flags Flow direction Service Type Token Rate Token Bucket Size Peak Bandwidth HCI _Flow _Specification  0x0810  2  10 Access Latency  Yes   Connection_Handle Status Maximum_Latency Connection_Handle Minimum_Remote_ Timeout   HCI_Sniff_Subrating 0x0811 2 11 Minimum_Local_Timeout  Yes     HOST CONTROLLER & BASEBAND HCI _Set _Event _Mask  0x0C01  3  1  Event Mask  States  Yes   HCI _Reset  0x0C03  3  3    States  Yes   Filter Type Filter Condition Type HCI _Set _Event _Filter  0x0C05  3  5 Condition States Yes  States HCI _Flush  0x0C08  3  8  Connection Handle  Connection Handle  Yes  States HCI _Read _PIN _Type  0x0C09  3  9    PIN Type  Yes   HCI _Write _PIN _Type  0x0C0A  3  A  PIN Type  States  Yes   HCI _Create _New _Unit _Key  0x0C0B  3  B    States  Yes   BD ADDR  States Max Num Keys HCI _Read _Stored _Link _Key  0x0C0D  3  D  Read All Flag  Num Keys Read No  Num Keys To Write  States BD ADDR [I] HCI _Write _Stored _Link _Key  0x0C11  3  11 Link Key [I]  Num Keys Written  No  BD ADDR  States HCI _Delete _Stored _Link _Key 0x0C12  3  12  Delete All Flag  Num Keys Deleted  No  HCI _Write _Local _Name  0x0C13  3  13  Local Name  States  Yes   States HCI _Read _Local _Name  0x0C14  3  14    Local Name  Yes  States HCI _Read _Connection _Accept_Timeout  0x0C15 3  15    Conn Accept Timeout  Ye s  HCI _Write _Connection _Accept_Timeout  0x0C16 3  16  Conn Accept Timeout  States  Yes   States HCI _Read _Page _Timeout  0x0C17  3  17    Page Timeout  Yes   HCI _Write _Page _Timeout  0x0C18  3  18  Page Timeout  States  Yes   States HCI _Read _Scan _Enable  0x0C19  3  19    Scan Enable  Yes   HCI _Write _Scan _Enable  0x0C1A  3  1A  Scan Enable  States  Yes   States Page Scan Interval HCI _Read _Page _Scan _Activity  0x0C1B 3  1B   Page Scan Window Yes   Page Scan Interval HCI _Write _Page _Scan _Activity  0x0C1C 3  1C  Page Scan Window  States Yes  States Inquiry Scan Interval HCI _Read _Inquiry _Scan _Activity  0x0C1D 3  1D   Inquiry Scan Window Yes   Control No. HD-AE-C071113                 (4/10) Control name Electrical characteristics
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  16/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-C071113                (5/10) Control name Electrical characteristics  Inquiry Scan Interval HCI _Write _Inquiry _Scan _Activity  0x0C1E 3  1E  Inquiry Scan Window  States Yes  States HCI _Read _Authentication _Enable  0x0C1F 3  1F    Authentication Enable  Yes   HCI _Write _Authentication _Enable  0x0C20 3  20  Authentication Enable  States  Yes   States HCI _Read _Encryption _Mode  0x0C21  3  21    Encryption Mode  Yes   HCI _Write _Encryption _Mode  0x0C22  3  22  Encryption Mode  States  Yes   States HCI _Read _Class _of _Device  0x0C23  3  23    Class of Device  Yes  HCI _Write _Class _of _Device  0x0C24  3  24  Class of Device  States  Yes   States HCI _Read _Voice _Setting  0x0C25  3  25    Voice Setting  Yes   HCI _Write _Voice _Setting  0x0C26  3  26  Voice setting  States  Yes   States Connection Handle HCI _Read _Automatic _Flush _Timeout  0x0C27 3  27  Connection Handle Flush Timeout Yes   Connection Handle  States HCI _Write _Automatic _Flush_ Timeout  0x0C28 3  28  Flash Timeout  Connection Handle  Yes  HCI _Read _Num _Broadcast_ Retransmission  0x0C29 3  29    States  Yes   HCI _Write _Num _Broadcast_ Retransmission  0x0C2A 3  2A  Num Broadcast Retransmission  States Yes  States HCI _Read _Hold _Mode _Activity  0x0C2B 3  2B    Hold Mode Activity  Yes  HCI _Write _Hold _Mode _Activity  0x0C2C 3  2C  Hold Mode Activity  States  Yes   Connection Handle  States Connection Handle HCI _Read _Transmit _Power _Level  0x0C2D 3  2D  Type  Power Level Yes   States HCI _Read _Synchronous _Flow _Control _Enable  0x0C2E 3  2E    Synchronous Flow Control Enable No  HCI _Write _ Synchronous _Flow_Control _Enable  0x0C2F 3  2F  Synchronous Flow Control Enable  States No  HCI _Set _Controller _To _Host _Flow _Control  0x0C31  3  31  Flow Control Enable  States  Yes   Host ACL Data Packet Length Host SCO Data Packet Length Host Total Num ACL Data Packets HCI _Host _Buffer _Size  0x0C33  3  33 Host Total Num SCO Data Packets States Yes  Number of Handles Connection handle [I] HCI _Host _Number _Of _Completed _Packets  0x0C35 3  35  Host Num of Completed Packets [I]  Yes   States Connection Handle HCI _Read _Link _Supervision _Timeout  0x0C36 3  36  Connection Handle  Link Supervision Timeout Yes   Connection Handle  States HCI _Write _Link _Supervision _Timeout  0x0C37 3  37  Link Supervision Timeout  Connection Handle  Ye s  States HCI _Read _Number _Of _Support _IAC 0x0C38 3  38    Num Support IAC  Ye s  States Num Current IAC HCI _Read _Current _IAC _LAP 0x0C39  3  39   IAC LAP [I] Yes
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  17/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-C071113                 (6/10) Control name Electrical characteristics  Num Current IAC HCI _Write _Current _IAC _LAP  0x0C3A 3  3A  IAC LAP [I]  States Yes  States HCI _Read _Page _Scan _Period _Mode  0x0C3B 3  3B    Page Scan Period Mode  Yes   HCI _Write _Page _Scan _Period_Mode  0x0C3C  3  3C  Page Scan Period Mode  States  Yes   States HCI _Read _Page _Scan _Mode  0x0C3D  3  3D    Page Scan Mode  Yes   HCI _Write _Page _Scan _Mode 0x0C3E  3  3E  Page Scan Mode  States  No   HCI _Set _AFH _Host _Channel _Classification  0x0C3F 3  3F  AH Host Channel   Classification  Status Yes  Status HCI _Read _Inquiry _Scan _Type  0x0C42 3  42    Scan Type  Yes   HCI _Write _Inquiry _Scan _Type  0x0C43 3  43  Scan Type  Status  Yes   Status HCI _Read _Inquiry _Mode  0x0C44  3  44    Inquiry Mode  Yes   HCI _Write _Inquiry _Mode  0x0C45  3  45  Inquiry Mode  Status  Yes   Status HCI _Read _Page _Scan _Type  0x0C46  3  46    Page Scan Type  Yes  HCI _Write _Page _Scan _Type  0x0C47  3  47  Page Scan Type  Status  Yes   Status HCI Read _AFH _Channel   _Assessment _Mode  0x0C48 3  48    AFH Channel   Assessment Mode Yes   HCI Write _AFH _Channel   _Assessment _Mode  0x0C49 3  49  AFH Channel   Assessment Mode  Status Yes  Status FEC_Required HCI_Read_Extended_Inquiry_ Response  0x0C51 3  51    Extended_Inquiry_ Response Yes   FEC_Required HCI_Write_Extended_Inquiry_ Response  0x0C52 3  52  Extended_Inquiry_ Response Status Yes  Connection_Handle HCI_Enhanced_Flush 0x0C5F 3 5F Packet_Type  (None) Yes    INFORMATIONAL PARAMETERS Status HCI Version HCI Revision LMP Version Manufacturer Name HCI _Read _Local _Version _ Information  0x1001 4  1   LMP Subversion Yes   Status HCI _Read _Local _Supported _Commands  0x1002 4  2    Supported Commands  Yes  Status HCI _Read _Local _Supported   _Features  0x1003 4  3    LMP Features  Yes   Status Page number Maximum Page Number HCI _Read _Local _Extended _Features  0x1004 4  4  Page number Extended LMP Features Yes
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  18/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-C071113                 (7/10) Control name Electrical characteristics  Status HC ACL Data Packet Length HC Synchronous Data   Packet Length HC Total Num ACL Data Packets HCI _Read _Buffer _Size  0x1005  4  5   HC Total Num Synchronous Data Packets Yes   Status HCI _Read _BD _ADDR  0x1009  4  9    BD ADDR  Yes     STATUS PARAMETERS Status Connection Handle HCI _Read _Failed _Contact _Counter  0x1401 5  1  Connection Handle Failed Contact Counter Yes   Status HCI _Reset _Failed _Contact _Counter  0x1402 5  2  Connection Handle  Connection Handle  Yes  Status Connection Handle HCI _Read _Link _Quality  0x1403  5  3  Connection Handle Link Quality No  Status Connection Handle HCI _Read _RSSI  0x1405  5  5  Connection Handle RSSI Yes   Status Connection Handle AFH Mode HCI _Read _AFH _Channel _Map 0x1406  5  6  Connection Handle AFH Channel Map Yes   Status Connection Handle  Connection Handle Clock HCI _Read _Clock  0x1407  5  7 Which Clock  Accuracy Yes      TESTING States HCI _Read _Loopback _Mode  0x1801  6  1    Loopback Mode  Yes   HCI _Write _Loopback _Mode  0x1802  6  2  Loopback Mode  Status  Yes   HCI _Enable _Device _Under _Test_Mode  0x1803 6  3    Status  Yes   HCI_Write_Simple_Pairing_ Debug_mode  0x1804 6  4  Simple_Pairing_Debug_ Mode  Status Yes
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  19/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-C071113                (8/10) Control name Electrical characteristics        HCI EVENT LIST                                                        Event Description  OpCode Parameters  Status  Notes Inquiry Inquiry _Complete  0x01  Status  Yes   Num Responses BD ADDR [I] Page Scan Repetition Mode [I] Page Scan Period Mode [I] Page Scan Mode [I] Class of Device [I] Inquiry _Result  0x02 Clock Offset [I] Yes   Num Responses BD ADDR [I] Page Scan Repetition Mode [I] Page Scan Period Mode [I] Page Scan Mode [I] Class of Device [I] Clock Offset [I] Inquiry _Result _with _RSSI  0x22 RSSI [I] Yes  B  Connection Management Status Connection Handle BD ADDR Link Type Connection _Complete  0x03 Encryption Mode Yes   BD ADDR Class of Device Connection _Request  0x04 Link Type Yes   Status Connection Handle Disconnection _Complete  0x05 Reason Yes   Status Connection Handle BD ADDR Link Type Transmission Interval Retransmission Window Rx Packet Length Tx Packet Length Synchronous _Connection _Complete  0x2C Air Mode Yes   Status Connection Handle Transmission Interval Retransmission Window Rx Packet Length Synchronous _Connection _Changed  0x2D Tx Packet Length Yes
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  20/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-C071113                (9/10) Control name Electrical characteristics  Authentication / Pairing Status Authentication _Complete  0x06  Connection Handle  Ye s  Num Keys BD ADDR [I] Return _Link _Keys  0x15 Link Key [I] No a PIN _Code _Request  0x16  BD ADDR  Yes   Link _Key _Request  0x17  BD ADDR  Yes   BD ADDR Link Key Link _Key _Notification  0x18 Key Type Yes    Encryption Status Connection Handle Encryption _Change  0x08 Encryption Enable Yes   Status Change _Connection _Link _Key _Complete  0x09  Connection Handle  Yes   Status Connection Handle Master _Link _Key _Complete  0x0A Key Flag Yes    Remote Information Status BD ADDR Remote _Name _Request _Complete  0x07 Remote Name Yes   Status Connection Handle Read _Remote _Supported _Features _Complete  0x0B LMP Features Yes   Status Connection Handle LMP Version Manufacture Name Read _Remote _Version _Information _Complete  0x0C LMP Subversion Yes   Status Connection Handle Page Number Maximum page number Read _Remote _Extended _Features _Complete  0x23 Extended LMP Features Yes
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  21/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-C071113                 (10/10) Control name Electrical characteristics  Link Policy Status Connection Handle Flags Service Type Token Rate Peak Bandwidth Latency QoS _Setup _Complete  0x0D Delay Variation Yes   Status BD ADDR Role _Change  0x12 New Role Yes   Status Connection Handle Current Mode Mode _Change  0x14 Interval Yes   Status Connection Handle Flags Flow direction Service Type Token Rate Token Bucket Size Peak Bandwidth Flow _Specification _Complete  0x21 Access Latency Yes   Status Connection_Handle Maximum_Transmit_Latency Maximum_Receive_Latency Minimum_Remote_Timeout Sniff_Subrating 0x2E Minimum_Local_Timeout Yes    General Num HCI Command Packets Command Opcode Command _Complete  0x0E Return Parameters Yes   Status Num HCI Command Packets Command _Status  0x0F Command Opcode Yes   Hardware _Error  0x10  Hardware Code  Yes   Number of Handles Connection Handle [I] Number _Of _Completed _Packets  0x13 HC Num HCI Data Packets [I] Yes   Data _Buffer _Overflow  0x1A  Link Type  No   Connection Handle Max _Slots _Change  0x1B  LMP Max Slots  Yes  Status Connection Handle Read _Clock _Offset _Complete  0x1C Clock Offset Yes    Host Controller & Baseband Flush _Occurred  0x11  Connection Handle  Yes   Loopback _Command  0x19  HCI Command Packet  Yes   Status Connection Handle Connection _Packet _Type _Change  0x1D Packet Type Yes   QoS _Violation  0x1E  Connection Handle  No
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  22/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-D071113                (1/11) Control name Electrical characteristics PICS for Firmware Version XX.XX.XX The Bluetooth® functions of this module are as below. Depending on firmware version upgrade, the Bluetooth® functions are subject to change without notice.  RF Capabilities (based on PICS proforma for Radio):  Table 1: RF Capabilities Item Capability Status Support 1  Power Class =1  M.1  No 2  Power Class =2  M.1  Yes 3 Power Class=3  M.1  No 4 Power Control  C.1  Yes 5  1-slot packets supported  M  Yes 6  3-slot packets supported  O  Yes 7  5-slot packets supported  O  Yes 8 79 Channels  M  Yes 9  Support for GFSK modulation  M  Yes 10 Support for π/4-DQPSK modulation  C.2  Yes 11  Support for BDPSK modulation  C.3  Yes M.1: Must choose One and only One Power Class C.1: Mandatory to support IF Power Class 1 is supported, ELSE Optional C.2: Mandatory IF SUM (21/4) OR SUM (21/6) is claimed, Optional IF SUM (21/3) OR SUM (21/5) is claimed, Excluded otherwise. C.3: Mandatory IF SUM (21/4) OR SUM (21/6) is claimed, Optional IF RF(1/8) AND ( SUM (21/3) OR SUM (21/5) ) are claimed  Baseband Capabilities (based on PICS proforma for Baseband)  Table 1: Physical Channel Item Capability Status Support 1  Support frequency band and 79 RF channels  M  Yes 2  Adaptive Frequency Hopping Kernel  M  Yes   Table 1a: Modulation schemes Item Capability Status Support 1  Basic Data Rate, 1 Mbps payload data rate  M  Yes 2  Enhanced Data Rate, 2 Mbps payload data rate  C.1  Yes 3  Enhanced Data Rate, 3 Mbps payload data rate  C.2 Yes C.1 Mandatory IF SUMMARY(21/6) is claimed, Optional IF SUMMARY(21/5) is claimed C.2 Mandatory IF SUMMARY(21/6) is claimed, Optional IF BB(1a/2) AND SUMMARY(21/5) are claimed
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  23/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-D071113                (2/11) Control name Electrical characteristics  Table 2: Link Types Item Capability Status Support 1  Support of ACL link  M  Yes 2  Support of SCO link  O  Yes 3  Support of eSCO link  O  Yes 4  Support of Enhanced Data Rate ACL links    C.1  Yes 5  Support of Enhanced Data Rate eSCO links    C.2  Yes C.1 Mandatory IF SUMMARY(22/1) OR SUMMARY(22/2) is claimed, Optional IF SUMMARY(21/5) OR SUMMARY(21/6) is claimed C.2 Mandatory IF SUMMARY(22/3) is claimed, Optional IF SUMMARY(21/5) OR SUMMARY(21/6) is claimed C.2 Mandatory IF SUMMARY(22/3) is claimed, Optional IF SUMMARY(21/5) OR SUMMARY(21/6) is claimed   Table 3: SCO Link support  Prerequisite for Items (3/5-8):(2/3) (Support of eSCO link) Prerequisite for Items (3/1-4):(2/2) (Support of SCO link) Item Capability Status Support 1  SCO links to same Slave  C.1  Yes 2  SCO links to different Slaves  O  Yes 3  SCO links from same Master  C.1  Yes 4  SCO links from different Masters  O  Yes 5  eSCO links to same Slave  C.2  Yes 6  eSCO links to different Slaves  O  Yes 7  eSCO links from same Master  C.2  Yes 8  eSCO links from different Masters  O  Yes C.2: Mandatory to support at least One link (3/5 or 3/7) C.1: Mandatory to support at least One link (3/1 3/3)       Table 4: Common packet types Item Capability Status Support 1  Support of ID packet type  M  Yes 2  Support of NULL packet type  M  Yes 3  Support of POLL packet type  M  Yes 4  Support of FHS packet type  M  Yes 5  Support of DM1 packet type  M  Yes   Table 5: ACL packet types Item Capability  Status Support 1  Support of DH1 packet type M Yes 2  Support of DM3 packet type O Yes 3  Support of DH3 packet type O Yes 4  Support of DM5 packet type O Yes 5  Support of DH5 packet type O Yes 6  Support of AUX1 packet type O Yes
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  24/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-D071113               (3/11) Control name Electrical characteristics  Table 5a: Enhanced Data Rate ACL Packet Types  Prerequisite: 2/4 (Support of Enhanced Data Rate ACL links) Item Capability  Status Support 1  Support 2-DH1 packet type C.1 Yes 2  Support 2-DH3 packet type C.2 Yes 3  Support 2-DH5 packet type C.2 Yes 4  Support 3-DH1 packet type C.3 Yes 5  Support 3-DH3 packet type C.4 Yes 6  Support 3-DH5 packet type C.5 Yes C.1 Mandatory IF SUMMARY(22/1) OR SUMMARY(22/2) is claimed, Optional IF BB(1a/2) is claimed C.2 Mandatory IF SUMMARY(22/2) is claimed, Optional IF BB(1a/2) is claimed C.3 Mandatory IF SUMMARY(22/1) OR SUMMARY(22/2) is claimed, Optional IF BB(1a/3) is claimed C.4 Mandatory IF SUMMARY(22/2) is claimed, Optional IF BB(5a/2) AND BB(5a/4) are claimed C.5 Mandatory IF SUMMARY(22/2) is claimed, Optional IF BB(5a/3) AND BB(5a/4) are claimed   Table 6: SCO and eSCO packet types        Prerequisite for Items (6/1-4):(2/2) (Support of SCO link) Prerequisite for Items (6/5-7):(2/3) (Support of eSCO link) Item Capability  Status Support 1  Support of HV1 packet type C.1 Yes 2  Support of HV2 packet type O Yes 3  Support of HV3 packet type O Yes 4  Support of DV packet type C.1 Yes 5  Support of EV3 packet type  C.2  Yes 6  Support of EV4 packet type  O  Yes 7  Support of EV5 packet type  O  Yes C.1 Mandatory IF only (2/2) SCO link is supported C.2 Mandatory IF only (2/3) eSCO link is supported   Table 6a: Enhanced Data Rate eSCO packet types       Prerequisite: 2/5 (Support Enhanced Data Rate eSCO links) Item Capability  Status Support 1  Support 2 –EV3 packet type C.1 Yes 2  Support 2 –EV5 packet type C.2 Yes 3  Support 3 –EV3 packet type C.3 Yes 4  Support 3 –EV5 packet type C.4 Yes C.1 Mandatory IF SUMMARY(22/3) is claimed, Optional IF BB(1a/2) is claimed C.2 Optional IF BB(1a/2) is claimed C.3 Mandatory IF SUMMARY(22/3) is claimed Optional IF BB(1a/3) is claimed C.4 Optional IF BB(1a/3) is claimed
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  25/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-D071113                 (4/11) Control name Electrical characteristics  Table 7: Page procedures Item Capability Status Support 1 Support paging  M  Yes 2  Support page scan  M  Yes 3  (Intentionally left blank)   No 4  (Intentionally left blank)   No 5  Supports Interlaced Scan during page scan  O  Yes  Table 8: Paging schemes Item Capability Status Support 1  Supports mandatory scan mode  M Yes   Table 9: Paging modes Item Capability  Status Support 1  Supports paging mode R0 C.1 Yes 2  Supports paging mode R1 C.1 Yes 3  Supports paging mode R2 C.1 Yes C.1: At least one of the paging scan modes must be supported.   Table 9b: Paging train repetition Item Capability  Status Support 1  Supports Npage >= 1 O Yes 2  Supports Npage >= 128 O Yes 3  Supports Npage >= 256 M Yes Note: The master should use Npage >= 256 unless it knows what SR mode the slave uses.        Table 10: Inquiry procedures Item Capability  Status Support 1 Support inquiry O Yes 2  Inquiry scan with first FHS  O Yes 3  (Intentionally left blank)  No 4  (Intentionally left blank)  No 5  Supports the dedicated inquiry access code  O Yes 6  Supports Interlaced Scan during inquiry scan  O  Yes 7  Extended Inquiry Response  O Yes   Table 11: Piconet capabilities Item  Capability  Status Support 1 Broadcast messages O Yes 2 Point-to-multipoint connections O Yes   Table 12: Scatternet capabilities Item Capability  Status Support 1  Act as Master in one piconet and as Slave in another piconet O Yes 2  Act as Slave in more than one piconet O Yes
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  26/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-D071113                 (5/11) Control name Electrical characteristics   Table 13: Synchronous Coding Schemes Prerequisite: 2/2 (SCO link support) Item  Capability  Status Support 1 A-law O Yes 2 u-law O Yes 3 CVSD O Yes 4  Transparent Synchronous Data  O  Yes  Table 14: Erroneous Data Reporting  Item Capability  Status Support 1  Erroneous Data Reporting for SCO C.1 Yes 2  Erroneous Data Reporting for eSCO C.2 Yes C.1: Optional IF ((SUM ICS: 21/5 OR SUM ICS: 21/6) AND HCI: 9/6) is supported, ELSE excluded. C.2: Optional IF ((SUM ICS: 21/5 OR SUM ICS: 21/6) AND HCI: 9/7) is supported, ELSE excluded.   Table 15: This table is intentionally left blank: DO NOT USE Item Capability  Status Support 1  (Intentionally left blank)  No    Table 16: Non-flushable Packet Boundary Flag Item Capability  Status Support 1  Support Non-flushable Packet Boundary Flag C.1 Yes C.1 MANDATORY IF ((SUM ICS: 21/5 OR SUM ICS 21/6) AND HCI: 12/10) is supported, ELSE OPTIONAL IF (SUM ICS: 21/5 OR SUM ICS: 21/6) is supported, ELSE excluded.    Table 17: Connection States Item Capability  Status Support 1  Sniff Subrating Mode C.1 Yes C.1 MANDATORY IF ((SUM ICS: 21/5 OR SUM ICS 21/6) AND LMP: 2/8) is supported, ELSE OPTIONAL IF (SUM ICS: 21/5 OR SUM ICS: 21/6) is supported, ELSE excluded.
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  27/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-D071113                 (6/11) Control name Electrical characteristics  Link Manager Capabilities (based on PICS proforma for Link Manager)  Table 1: Response Messages Item Capability  Status Support 1 Accept message M Yes 2 Reject message M Yes  Table 2: Supported Features Item Capability  Status Support 1 3-slot packets O No 2 5-slot packets O Yes 3 Encryption C.5 Yes 4 Slot offset O Yes 5 Timing accuracy O Yes 6  Role switch (Master/Slave) O Yes 7 Hold mode O Yes 8 Sniff mode O Yes 9 Park mode O Yes 10 Power Control C.1 Yes 11  Channel quality driven data rate O Yes 12 SCO link  O  Yes 13 RSSI  O  Yes 14 Broadcast encryption  O  Yes 15 eSCO link  O  Yes 16  Adaptive frequency hopping  M  Yes 17  Enhanced Data Rate ACL  C.2  Yes 18  Enhanced Data Rate eSCO  C.3   19 Simple Pairing  C.4  Yes C.1: Mandatory IF (RF:1/1) supported, ELSE Optional C.2 Mandatory IF (SUMMARY:22/1) OR (SUMMARY:22/2) is claimed, Optional IF (SUMMARY:21/5) OR (SUMMARY:21/6) is claimed C.3 Mandatory IF (SUMMARY:22/3) is claimed, Optional IF (SUMMARY:21/5) OR (SUMMARY:21/6) is claimed C.4 Mandatory IF (SUMMARY 2-1/5 OR SUMMARY 2-1/6) is claimed, ELSE Excluded. C.5 Optional IF (SUMMARY 2-1/1 OR SUMMARY 2-1/2 OR SUMMARY 2-1/3 OR SUMMARY 2-1/4) ELSE Mandatory        Table 3: Authentication Item Capability  Status Support 1  Initiate authentication before connection completed O Yes 2  Initiate authentication after connection completed O Yes 3  Respond to authentication request M Yes  Table 4: Pairing Item Capability  Status Support 1  Initiate pairing before connection completed O Yes 2  Initiate pairing after connection completed O Yes 3  Respond to pairing request M Yes 4  Use fixed PIN and request responder to initiator switch C.1 Yes 5  Use variable PIN C.1 Yes 6  Accept initiator to responder switch C.2 Yes C.1: Mandatory to support at least One, (LMP:4/4) OR (LMP:4/5) OR both C.2: Mandatory IF (LMP: 4/5) AND (LMP:4/1), OR (LMP: 4/5) AND (LMP:4/2) ) is supported.
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  28/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-D071113                 (7/11) Control name Electrical characteristics  Table 5: Link Keys Item Capability  Status Support 1  Creation of link key - Unit Key C.1 No 2  Creation of link key - Combination Key C.1 Yes 3  Initiate change of link key O Yes 4  Accept change of link key M Yes 5 (Intentionally left blank)  No 6 (Intentionally left blank)  No 7  Accept pairing with Unit Key  O  Yes C.1: Mandatory to support at least One - either (LMP:5/1) OR (LMP:5/2).  Table 6: Encryption Prerequisite: 2/3(Encryption supported) Item Capability  Status Support 1 Initiate encryption C.1 Yes 2  Accept encryption requests M.1 Yes 3 (Intentionally left blank)  No 4 (Intentionally left blank)  No 5  Key size negotiation M.1 Yes 6  Start encryption, as master M.1 Yes 7  Accept start of encryption M.1 Yes 8  Stop encryption, as master M.1 Yes 9  Accept stop of encryption M.1 Yes M.1: Mandatory IF (LMP:2/3) - (Encryption) is supported. C.1: Mandatory IF (SUMMARY 2-1/5 OR SUMMARY 2-1/6) is claimed, ELSE Optional.  Table 7: Clock offset information  Item Capability  Status Support 1  Request clock offset information O Yes 2  Respond to clock offset requests M Yes  Table 8: Slot offset information Prerequisite: 2/4 (Slot offset) Item Capability  Status Support 1  Send slot offset information C.1 Yes C.1: Mandatory IF (LMP:13/1) - (Master/Slave switch) supported, ELSE Optional.   Table 9: Timing accuracy information Prerequisite: 2/5 (Timing accuracy) Item Capability  Status Support 1  Request timing accuracy information O Yes 2  Respond to timing accuracy information requests M.1 Yes M.1: Mandatory IF (LMP:2/5) - (Timing Accuracy) supported  Table 10: LM version information Item  Capability  Status Support 1  Request LM version information O Yes 2  Respond to LM version information requests M Yes
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  29/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-D071113                 (8/11) Control name Electrical characteristics  Table 11: Feature support Item Capability  Status Support 1  Request supported features C.1 Yes 2  Respond to supported features requests M Yes 3 Request extended features mask  C.2  Yes 4  Respond to extended features Request  C.2  Yes C.1: Mandatory IF any of the Optional features in (LMP:2/1-3), (LMP:2/5), (LMP:2/7-12), (LMP:2/14-16), (LMP:26/1) is requested by the IUT, ELSE Optional. C.2 Mandatory IF a feature requiring another features page is supported, ELSE Optional.  Table 12: Name information Item Capability  Status Support 1  Request name information O Yes 2  Respond to name requests M Yes  Table 13: Role Switch Prerequisite: 2/6(Role switch) Item Capability  Status Support 1  Request Master Slave switch O Yes 2  Accept Master Slave switch requests M.1 Yes         M.1 Mandatory IF LMP:(2/6) - (Role Switch) supported  Table 14: Detach Item Capability  Status Support 1 Detach connection M Yes   Table 14a: Setting up and Removing Enhanced Data Rate ACL Connection Item Capability  Status Support 1  Enter Enhanced Data Rate C.1 Yes 2  Exit Enhanced Data Rate C.1 Yes        C.1 Mandatory IF (LMP:2/17) supported, ELSE Excluded.   Table 14b: Setting up and Removing Enhanced Data Rate eSCO Connection Item Capability  Status Support 1  Enter and exit eSCO using Enhanced Data Rate Packets C.1 Yes C.1 Mandatory IF (LMP:2/18) supported, ELSE Excluded.   Table 15: Hold mode Prerequisite: 2/7 (Hold mode) Item Capability  Status Support 1  Force hold mode O Yes 2  Request hold mode C.1 Yes 3  Respond to hold mode requests M Yes 4  Accept forced hold mode M Yes C.1: Mandatory IF (LMP:15/1) - (Force hold mode) is supported, ELSE Optional.
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  30/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-D071113                 (9/11) Control name Electrical characteristics  Table 16: Sniff mode Item Capability  Status Support 1    No 2  Request sniff mode O Yes 3  Respond to sniff mode requests (rengotiate or reject) M.1 Yes 4    No 5 Request un-sniff C.1 Yes 6 Accept un-sniff requests M.1 Yes 7 Sniff Subrating Mode C2 Yes C.1: Mandatory IF (LMP:16/2) - (Request sniff mode) is supported, ELSE Optional. M.1: Mandatory IF (LMP:2/8) - (Sniff Mode) is supported. C.2 Mandatory IF (SUMMARY 2-1/5 OR SUMMARY 2-1/6) is claimed, ELSE Excluded  Table 17: Park mode Item Capability  Status Support 1     2  Request park mode O Yes 3  Respond to park mode requests M.1 Yes 4     5  Set up broadcast scan window O Yes 6  Accept changes to the broadcast scan window M.1 Yes 7 Modify beacon parameters O Yes 8  Accept modification of beacon parameters M.1 Yes 9  Request Unpark using PM_ADDR C.1 Yes 10  Request Unpark using BD_ADDR C.1 Yes 11 Slave requested Unpark O Yes 12  Accept Unpark using PM_ADDR M.1 Yes 13  Accept Unpark using BD_ADDR M.1 Yes M.1: Mandatory IF (LMP:2/9) - (Park Mode) is supported C.1: IF (LMP:17/3) - (Respond to park mode requests) is supported, THEN at least One of (LMP:17/9) - (Unpark using PM_ADDR) OR (LMP:17/10) - (Unpark using BD_ADDR) is Mandatory, ELSE Optional.  Table 18: Power Control Prerequisite: 2/13 (RSSI) Prerequisite: 2/10(Power contorol) Item Capability  Status Support 1  Request to increase power M.1 Yes 2  Request to decrease power M.1 Yes 3  Respond when max power reached M.2 Yes 4  Respond when min power reached M.2 Yes M.1: Mandatory IF (LMP:2/13) - (RSSI) is supported M.2: Mandatory IF (LMP:2/10) - (Power Control) is supported  Table 19: Link supervision timeout Item Capability  Status Support 1  Set link supervision timeout value O Yes 2  Accept link supervision timeout setting M Yes  Table 20: Quality of Service Item Capability  Status Support 1  Channel quality driven change between DM and DH packet types C.1 Yes 2  Force/Request change of Quality of Service M Yes 3  Request change of Quality of Service M Yes C.1: Mandatory IF support of (LMP:2/11) is stated in the feature request, ELSE Optional.
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  31/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-D071113                (10/11) Control name Electrical characteristics  Table 21: SCO Links Prerequisite: 2/12 (SCO links) Item Capability  Status Support 1  Initiate SCO links, as Master O Yes 2  Initiate SCO links, as Slave O Yes 3  Accept SCO links O Yes 4  Remove SCO links, as Master C.1 Yes 5  Remove SCO links, as Slave C.2 Yes 6  Negotiate SCO link parameters, as Master C.3 Yes 7  Negotiate SCO link parameters, as Slave C.4 Yes C.1: Mandatory IF (LMP:21/1) - (Initiating SCO links, as Master) is supported, ELSE Optional. C.2: Mandatory IF (LMP:21/2) - (Initiating SCO links, as Slave) is supported, ELSE Optional. C.3: Mandatory IF (LMP:21/1) - (Initiating SCO links, as Master) OR (LMP:21/3) - (Accept SCO links) is supported, ELSE Optional. C.4: Mandatory IF (LMP:21/2) - (Initiating SCO links, as Slave) OR (LMP:21/3) - (Accept SCO links) is supported, ELSE Optional. Table 22: Multi-Slot packages Item Capability  Status Support 1  Accept maximum allowed number of slots to be used C.1 Yes 2  Request maximum number of slots to be used C.1 Yes 3  Accept request of maximum number of slots to be used C.1 Yes C.1: Mandatory IF (LMP:2/1) AND/OR (LMP:2/2) is supported in the feature request, ELSE Optional.  Table 23: Paging scheme Item Capability  Status Support 1  Request page mode to use O No 2  Accept suggested page mode O No 3  Request page scan mode to use O No 4  Accept suggested page scan mode O No   Table 24: Connection Establishment Item Capability  Status Support 1  Create connection for higher layers M Yes 2  Respond to requests to establish connections for higher layers M Yes 3 Indicate that link set-up is completed M Yes   Table 25: Test Mode Item Capability  Status Support 1 Activate test mode O Yes 2  Ability to reject activation of test mode if test mode is disabled M Yes 3  Control test mode O Yes 4  Ability to reject test mode control commands if test mode is disabled. M Yes
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  32/36 TAIYO YUDEN   EYTFEBS Control No. HD-AE-D071113                 (11/11) Control name Electrical characteristics   Table 26: Adaptive Frequency Hopping Prerequisite: 2/20(AFH) Item Capability  Status Support 1  Support of AFH switch as master  O Yes 2  Support of AFH switch as slave  M Yes 3  Support of Channel Classification reporting as master  C.1  Yes 4  Support of Channel Classification reporting as slave  C.2  Yes 5  Support channel classification from host  C.3  Yes 6  Support of Channel Classification  O Yes C.1: Optional IF (LMP:26/6) is supported, ELSE Excluded. C.2: Mandatory IF (LMP:26/6) is supported, ELSE Excluded. C.3: Mandatory IF (LMP:26/1) OR (LMP:26/4) is supported, ELSE Optional. M.1: Mandatory IF (LMP:2/20) - (AFH) supported   Table 27: This Table is intentionally left blank Item Capability  Status Support 1  This line is intentionally blank.  O No 2  This line is intentionally blank.  O No 3 N/A  O  No 4 N/A  O  No
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  33/36 TAIYO YUDEN   EYTFEBS Control No. HD-MC-A071113               (1/1)  Control name Circuit Schematic  Block Diagram PIO2/ WLAN_ACTIVE /CH_DATAUSB D+USB D-PIO4/ BT_PRIORITY /CH_CLKPIO0/RADIO_DISABLE/RESET198Connector32456710VDD_3.3VGNDBPFBasebandMicrocontroller2MbitFlash ROMCRYSTAL26 MHzRFLDOBluetoothDeviceAntennaGND(DETECT)GND
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  TAIYO YUDEN                         34/36 EYTFEBS Control No. HD-AD-A071113                 (1/1)  Control name Outline/Appearance   31.028.0+/-0.3515.2+/-0.34.0+/-0.318.2+/-0.1max0.5max5.4Shielding case13.0+/-0.115. 010.0+/-0.36.0+/-0.352.0+/-0.12.53.53.7+/-0.35R1.0+/-0.110115.0+/-0.5max3.0Indication labelIndication label12.0 +/-0.57.5+/-0.3 Note:   Outline/Appearance data is PRELIMINARY, not guaranteed and subject to change without notice.    Please contact Taiyo Yuden for the details of module mountings.  Unit: mm, Tolerances unless otherwise specified: +/-0.2mm
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  TAIYO YUDEN                         35/36 EYTFEBS Control No. HD-AD-B071113                 (1/1)  Control name Outline/Appearance  Indication label               Material: PET ( UL969 ) / Label color : White         Unit: mm 5.4529.05.213.8R2.9TBD
12-Sep-2007  Ver.0.1    TAIYO YUDEN Confidential & Tentative  TAIYO YUDEN                         36/36 EYTFEBS  Control No. HD-BA-A071113                (1/1)  Control name Pin Layout  Pin Descriptions  Terminal No.  Terminal name  Input/Output Description  Remark 1 GND  -  Ground   2  USB_D+  Input/Output USB data (Positive) input-output   3  USB_D-  Input/Output USB data (Negative) input-output   4 PIO4/ (BT_PRIORITY/ CH_CLK) Output  BT_Priority/CH_CLK output for Co-existence signaling  5 GND(DETECT)  -  DETECT   6 /RESET  Input  Active low RESET signal with internal weak pull-up  7 PIO2/ (WLAN_ACTIVE/ CH_DATA) Input  WLAN_Active/CH_Data input for Co-existence signaling  8 VDD_3.3V  Input  DC3.3V Power supply  Note 1  9  PIO0/ RADIO_DISABLE  Input Radio Disable signal input Low    RF ON High    RF OFF  10 GND  -  Ground    Notes: 1. Pin8 (VDD_3.3V) is used for power supply of BT module. (MAX 200mA).  To fill the standard of “Supply voltage ripple and spike noise”, the capacitor, which has the capacity of TBD uF or more , should be put in the terminal VDD_3.3V outside as a bypass capacitor .

Navigation menu