Broadcom BRCM1014 Broadcom 802.11 a/g Mini PCI Card User Manual Notebook 367426 xx1

Broadcom Corporation Broadcom 802.11 a/g Mini PCI Card Notebook 367426 xx1

CRN 27776 Tablet user manual

DRAFT Revised: 8/24/04File: Title.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmHardware and Software GuideHP Tablet PC SeriesDocument Part Number: 367426-001December 2004

ContentsHardware and Software Guide vDRAFT Revised: 8/24/04File: 367426-001TOC.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmContents1 Tablet PC FeaturesPen Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1Top Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2Pointing Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5Pen-Activated Buttons. . . . . . . . . . . . . . . . . . . . . . . . 1–6Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–7Front Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–9Rear Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–11Right-Side Components . . . . . . . . . . . . . . . . . . . . . . . . . 1–13Left-Side Components . . . . . . . . . . . . . . . . . . . . . . . . . . 1–15Bottom Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–17Additional Hardware Components. . . . . . . . . . . . . . . . . 1–182PowerPower Control and Light Locations . . . . . . . . . . . . . . . . . 2–1Selecting a Power Source. . . . . . . . . . . . . . . . . . . . . . . . . 2–4Standby and Hibernation . . . . . . . . . . . . . . . . . . . . . . . . . 2–5Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5Hibernation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5Initiating Standby, Hibernation or Shutdown . . . . . . . . . 2–6When You Leave Your Work . . . . . . . . . . . . . . . . . . 2–6When the Power Supply Is Uncertain . . . . . . . . . . . . 2–7When Using Infrared Communication or Drive Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–7

ContentsHardware and Software Guide viDRAFT Revised: 8/24/04File: 367426-001TOC.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing the Default Power Settings . . . . . . . . . . . . . . . . . . 2–8Turning the Tablet PC or Display On or Off. . . . . . . 2–8Initiating or Restoring from Hibernation. . . . . . . . . . 2–9Initiating or Resuming from Standby . . . . . . . . . . . 2–10Using Emergency Shutdown Procedures . . . . . . . . 2–11Managing Power Options. . . . . . . . . . . . . . . . . . . . . . . . 2–11Accessing the Power Options Window . . . . . . . . . . 2–12Displaying the Power Meter Icon . . . . . . . . . . . . . . 2–12Setting or Changing a Power Scheme . . . . . . . . . . . 2–12Using a Security Password . . . . . . . . . . . . . . . . . . . 2–13Processor Performance Controls . . . . . . . . . . . . . . . . . . 2–13Using Battery Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–15Identifying Battery Packs . . . . . . . . . . . . . . . . . . . . 2–16Inserting or Removing a Primary Battery Pack. . . . 2–16Attaching or Detaching an Optional Travel Battery 2–18Charging Battery Packs . . . . . . . . . . . . . . . . . . . . . . . . . 2–21Charging the Primary Battery . . . . . . . . . . . . . . . . . 2–22Charging an Optional Travel Battery . . . . . . . . . . . 2–23Charging a New Battery Pack . . . . . . . . . . . . . . . . . 2–23Charging an In-Use Battery Pack . . . . . . . . . . . . . . 2–23Monitoring the Charge of a Battery Pack . . . . . . . . . . . 2–24Obtaining Accurate Charge Information . . . . . . . . . 2–24Displaying Charge Information on the Screen . . . . 2–24Managing Low-Battery Conditions . . . . . . . . . . . . . . . . 2–25Identifying Low-Battery Conditions . . . . . . . . . . . . 2–26Resolving Low-Battery Conditions . . . . . . . . . . . . . 2–26Calibrating a Battery Pack . . . . . . . . . . . . . . . . . . . . . . . 2–28When to Calibrate . . . . . . . . . . . . . . . . . . . . . . . . . . 2–28How to Calibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–28Conserving Battery Power . . . . . . . . . . . . . . . . . . . . . . . 2–31Conserving Power As You Work . . . . . . . . . . . . . . 2–31Selecting Power Conservation Settings. . . . . . . . . . 2–32Storing a Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . 2–32Disposing of a Used Battery Pack . . . . . . . . . . . . . . . . . 2–33

ContentsHardware and Software Guide viiDRAFT Revised: 8/24/04File: 367426-001TOC.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm3 Pointing Devices and KeyboardUsing a Pointing Device. . . . . . . . . . . . . . . . . . . . . . . . . . 3–1Using the Pointing Stick . . . . . . . . . . . . . . . . . . . . . . 3–2Using the TouchPad. . . . . . . . . . . . . . . . . . . . . . . . . . 3–3Using an External Mouse . . . . . . . . . . . . . . . . . . . . . 3–4Setting Pointing Device Preferences . . . . . . . . . . . . . 3–4Using Hotkeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–5Hotkey and Shortcut Key Quick Reference . . . . . . . 3–6Initiating Standby (fn+f3) . . . . . . . . . . . . . . . . . . . . . 3–6Switching Displays (fn+f4) . . . . . . . . . . . . . . . . . . . . 3–7Viewing Battery Charge Information (fn+f8) . . . . . . 3–7Decreasing Screen Brightness (fn+f9). . . . . . . . . . . . 3–8Increasing Screen Brightness (fn+f10) . . . . . . . . . . . 3–8Ambient Light Sensor (fn+f11) . . . . . . . . . . . . . . . . . 3–8Displaying System Information (fn+esc) . . . . . . . . . 3–8Using Hotkeys with External Keyboards . . . . . . . . . 3–8Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–9Using the Internal Keypad. . . . . . . . . . . . . . . . . . . . . 3–9Using an External Keypad. . . . . . . . . . . . . . . . . . . . 3–11Using Presentation Mode . . . . . . . . . . . . . . . . . . . . . . . . 3–12Using Quick Launch Buttons . . . . . . . . . . . . . . . . . . . . . 3–13Quick Launch Buttons Control Panel . . . . . . . . . . . . . . 3–14Accessing the Quick Launch Buttons Control Panel 3–14Setting Presentation Mode Preferences . . . . . . . . . . 3–15Setting Advanced Preferences . . . . . . . . . . . . . . . . . 3–174 Pen and Command ControlsPen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1Entering Information with the Pen . . . . . . . . . . . . . . 4–2Calibrating the Pen . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4Setting Pen Preferences . . . . . . . . . . . . . . . . . . . . . . . 4–5

ContentsHardware and Software Guide viiiDRAFT Revised: 8/24/04File: 367426-001TOC.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmCommand Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6Identifying Command Controls . . . . . . . . . . . . . . . . . 4–6Command Controls Quick Reference . . . . . . . . . . . . 4–7Using Command Controls . . . . . . . . . . . . . . . . . . . . . 4–8Setting Command Control Preferences . . . . . . . . . . 4–11On-Screen Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–145 MultimediaUsing Audio Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1Using the Audio-In (Microphone) Jack. . . . . . . . . . . 5–2Using the Audio-Out (Headphone) Jack . . . . . . . . . . 5–2Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . 5–3Using Video Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–4Using the S-Video Out Jack . . . . . . . . . . . . . . . . . . . 5–5Connecting a Monitor or Projector . . . . . . . . . . . . . . 5–6Using CD and DVD Software . . . . . . . . . . . . . . . . . . . . . 5–7Observing the Copyright Warning . . . . . . . . . . . . . . 5–7Installing Software. . . . . . . . . . . . . . . . . . . . . . . . . . . 5–8Enabling AutoPlay. . . . . . . . . . . . . . . . . . . . . . . . . . . 5–9Installing the Universal Disc Format Reader . . . . . . 5–9Using Windows Media Player. . . . . . . . . . . . . . . . . 5–10Using WinDVD Player . . . . . . . . . . . . . . . . . . . . . . 5–10Using WinDVD Creator Plus (Select Models Only) 5–10Using Sonic RecordNow! . . . . . . . . . . . . . . . . . . . . 5–11Changing DVD Region Settings . . . . . . . . . . . . . . . 5–116 Hardware ComponentsUsing Drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–1Caring for Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–1Adding a Drive to the System . . . . . . . . . . . . . . . . . . 6–3Identifying the Hard Drive Light. . . . . . . . . . . . . . . . 6–4Replacing the Primary Hard Drive . . . . . . . . . . . . . . 6–4

ContentsHardware and Software Guide ixDRAFT Revised: 8/24/04File: 367426-001TOC.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing PC Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–9Inserting a PC Card . . . . . . . . . . . . . . . . . . . . . . . . . 6–10Removing a PC Card . . . . . . . . . . . . . . . . . . . . . . . . 6–11Using SD Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–12Inserting an SD Card . . . . . . . . . . . . . . . . . . . . . . . . 6–12Removing an SD Card. . . . . . . . . . . . . . . . . . . . . . . 6–13Adding and Upgrading Memory Modules . . . . . . . . . . . 6–14Adding or Upgrading a Memory Module in the Expansion Memory Slot . . . . . . . . . . . . . . . . . . . . . 6–14Upgrading the Memory Module in the Primary Memory Module Slot. . . . . . . . . . . . . . . . . . . . . . . . 6–19Effects of Increasing Memory . . . . . . . . . . . . . . . . . 6–24Connecting a Modem Cable. . . . . . . . . . . . . . . . . . . . . . 6–25Using the Modem Cable . . . . . . . . . . . . . . . . . . . . . 6–26Using a Country-Specific Adapter . . . . . . . . . . . . . 6–26Connecting a Network Cable . . . . . . . . . . . . . . . . . . . . . 6–28Linking to An Infrared Device. . . . . . . . . . . . . . . . . . . . 6–29Setting Up an Infrared Transmission. . . . . . . . . . . . 6–30Using Standby with Infrared . . . . . . . . . . . . . . . . . . 6–31Connecting a USB Device . . . . . . . . . . . . . . . . . . . . . . . 6–32Using a USB Device . . . . . . . . . . . . . . . . . . . . . . . . 6–32Enabling USB Legacy Support . . . . . . . . . . . . . . . . 6–33Connecting Optional External Devices . . . . . . . . . . . . . 6–33Connecting an Optional External MultiBay and External MultiBay II . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–347 Q Menu and Desktop Video ProfilesQ Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–1Identifying Q Menu Controls . . . . . . . . . . . . . . . . . . 7–2Displaying and Closing the Q Menu . . . . . . . . . . . . . 7–2Selecting an Item from the Q Menu . . . . . . . . . . . . . 7–3Obtaining Information About System-Defined Items 7–3Setting Q Menu Preferences . . . . . . . . . . . . . . . . . . . 7–4Using a System-Defined Item . . . . . . . . . . . . . . . . . . 7–9

ContentsHardware and Software Guide xDRAFT Revised: 8/24/04File: 367426-001TOC.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmDesktop Video Profiles . . . . . . . . . . . . . . . . . . . . . . . . . 7–16Identifying Profiles and Modes . . . . . . . . . . . . . . . . 7–16Using the Default Profiles . . . . . . . . . . . . . . . . . . . . 7–21Enabling the Default Profiles . . . . . . . . . . . . . . . . . 7–23Customizing the Profiles (Optional) . . . . . . . . . . . . 7–24Change Mode Service . . . . . . . . . . . . . . . . . . . . . . . . . . 7–26Tablet PC Button Driver . . . . . . . . . . . . . . . . . . . . . . . . 7–278 WirelessWireless Local Area Network (Select Models Only) . . . 8–3Connecting Your Wireless Tablet PC to a Corporate WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–4Connecting Your Wireless Tablet PC to a Public WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–4Setting Up a WLAN in Your Home . . . . . . . . . . . . . 8–5Using a WLAN Connection . . . . . . . . . . . . . . . . . . . 8–6Using Wireless Security Features . . . . . . . . . . . . . . . 8–7Installing Wireless Software (Optional) . . . . . . . . . . 8–7Troubleshooting 802.11 Wireless Devices . . . . . . . . 8–9Bluetooth (Select Models Only). . . . . . . . . . . . . . . . . . . 8–10Turning On, Turning Off, Enabling and Disabling the 802.11 Wireless and Bluetooth Devices . . . . . . . . . . . . 8–12Turning On the 802.11 Wireless and Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–14Turning Off and Disabling the 802.11 Wireless and Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . 8–159 SecuritySecurity Features Quick Reference . . . . . . . . . . . . . . . . . 9–1Setting Security Preferences in Computer Setup . . . . . . . 9–2Using Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–3HP and Windows Passwords . . . . . . . . . . . . . . . . . . . 9–4HP and Windows Password Guidelines . . . . . . . . . . 9–5

ContentsHardware and Software Guide xiDRAFT Revised: 8/24/04File: 367426-001TOC.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing Power-On Passwords. . . . . . . . . . . . . . . . . . . . . . . 9–6Setting Power-On Passwords. . . . . . . . . . . . . . . . . . . 9–6Entering Power-On Passwords . . . . . . . . . . . . . . . . . 9–7Requiring a Power-On Password at Restart . . . . . . . 9–7Using HP Administrator Passwords. . . . . . . . . . . . . . . . . 9–8Setting HP Administrator Passwords . . . . . . . . . . . . . . . . 9–8Entering HP Administrator Passwords . . . . . . . . . . . 9–9Using DriveLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–9Setting DriveLock Passwords . . . . . . . . . . . . . . . . . 9–10Entering DriveLock Passwords . . . . . . . . . . . . . . . . 9–12Requiring a Drivelock Password at Restart. . . . . . . 9–12Changing DriveLock Passwords . . . . . . . . . . . . . . . 9–13Removing DriveLock Protection. . . . . . . . . . . . . . . 9–14Disabling a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–15Using System Information . . . . . . . . . . . . . . . . . . . . . . . 9–15Setting System Information Options . . . . . . . . . . . . 9–16Firewall Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–16Connecting an Optional Security Cable. . . . . . . . . . . . . 9–19HP ProtectTools Security Manager (Select Models Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–20Embedded Security for ProtectTools. . . . . . . . . . . . 9–20Credential Manager for ProtectTools . . . . . . . . . . . 9–21BIOS Configuration for ProtectTools . . . . . . . . . . . 9–21Smart Card Security for ProtectTools . . . . . . . . . . . 9–2210MultiBootUnderstanding the Default Boot Sequence . . . . . . . . . . 10–1Enabling Bootable Devices in Computer Setup. . . . . . . 10–3Understanding MultiBoot Results . . . . . . . . . . . . . . . . . 10–4Setting MultiBoot Preferences . . . . . . . . . . . . . . . . . . . . 10–5Setting a New Default Boot Sequence . . . . . . . . . . 10–5Setting a MultiBoot Express Prompt. . . . . . . . . . . . 10–6Entering MultiBoot Express Preferences . . . . . . . . 10–7

xii Hardware and Software GuideContentshp CONFIDENTIALAugust 24, 2004 4:01 pm11Computer SetupUsing Computer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 11–1Accessing Computer Setup . . . . . . . . . . . . . . . . . . . 11–2Restoring Computer Setup Defaults . . . . . . . . . . . . 11–2Selecting from the File Menu . . . . . . . . . . . . . . . . . 11–3Selecting from the Security Menu. . . . . . . . . . . . . . 11–4Selecting from the Tools Menu . . . . . . . . . . . . . . . . 11–6Selecting from the Advanced Menu . . . . . . . . . . . . 11–612HP Client Management SolutionsConfiguration and Deployment . . . . . . . . . . . . . . . . . . . 11–2HP Client Manager Software . . . . . . . . . . . . . . . . . . . . . 11–213Software Update and RecoveriesPreparing to Update Software . . . . . . . . . . . . . . . . . . . . 11–1Obtaining the Support Software CD . . . . . . . . . . . . 11–2Accessing Tablet PC Information . . . . . . . . . . . . . . 11–2Downloading Software from the Internet . . . . . . . . . . . 11–3Downloading System ROM. . . . . . . . . . . . . . . . . . . 11–4Downloading Other Software . . . . . . . . . . . . . . . . . 11–5System Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–5Safeguarding Your Data . . . . . . . . . . . . . . . . . . . . . 11–6Setting System Restore Points. . . . . . . . . . . . . . . . . 11–6Repairing the Operating System . . . . . . . . . . . . . . . 11–7Reinstalling the Operating System . . . . . . . . . . . . . 11–7Reinstalling Device Drivers and Other Software . . 11–914SpecificationsOperating Environment . . . . . . . . . . . . . . . . . . . . . . . . . 11–1Rated Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–2Index

Hardware and Software Guide 1–1DRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm1Tablet PC FeaturesPen ComponentsComponent Description1Pen tip Interacts with the tablet PC whenever the tip is touching the screen or within 1.27 cm (0.5 inch) of the screen.When tapped on or held over a pen-activated button, activates the button.

1–2 Hardware and Software GuideTablet PC FeaturesDRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmTop ComponentsLights2Pen button Functions like the right button on an external mouse.3Pen tether eyelet Used with the tether eyelet on the tablet PC, enables you to tether the pen to the tablet PC.Component DescriptionComponent Description1Volume mute light On: System sound is turned off.2caps lock light On: Caps lock is on.3IDE drive light On: A drive in the hard drive bay is being accessed.

Tablet PC FeaturesHardware and Software Guide 1–3DRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm4Battery charge light Amber: A battery pack is charging.Green: A battery pack is close to full charge capacity.Blinking amber: A battery pack that is the only available power source has reached a low-battery condition. When the battery reaches a critical low-battery condition, the battery light begins blinking more quickly.Off: If the tablet PC is connected to an external power source, the light is turned off when all batteries in the tablet PC are fully charged. If the tablet PC is not connected to an external power source, the light is turned off until the battery reaches a low-battery condition.5Power/standby light Green: The tablet PC is on.Blinking green: The tablet PC is in Standby mode.6Wireless light On: An integrated wireless device has been enabled.7num lock light On: Num lock is on or the embedded numeric keypad is enabled.Component Description

1–4 Hardware and Software GuideTablet PC FeaturesDRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmPointing DevicesComponent Description1Pointing stick Moves the pointer and selects or activates items on the screen.2Right pointing stick button Functions like the right button on an external mouse.3Touchpad scroll zone* Scrolls upward or downward.4Right TouchPad button* Functions like the right button on an external mouse.5Left TouchPad button* Functions like the left button on an external mouse.

Tablet PC FeaturesHardware and Software Guide 1–5DRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmButtons6TouchPad* Moves the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling, selecting, and double-clicking.7Left pointing stick button Functions like the left button on an external mouse.*This table describes default settings. For information about changing the functions of TouchPad features, refer to the “Setting Pointing Device Preferences” section in Chapter 3, “Pointing Devices and Keyboard.”Component DescriptionComponent Description1Presentation mode button Turns on Presentation mode.2Volume mute button Turns off tablet PC sound.

1–6 Hardware and Software GuideTablet PC FeaturesDRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmPen-Activated Buttons3Volume down button Decreases tablet PC sound.4Volume up button Increases tablet PC sound.5Pen eject button Ejects the pen from the pen holder.Component DescriptionComponent Description1Tablet PC Input launch button*When Windows is running, opens the Microsoft Tablet PC Input Panel application, which includes a handwriting pad and an on-screen keyboard.

Tablet PC FeaturesHardware and Software Guide 1–7DRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmKeys2Rotate button* Switches the image between landscape and portrait orientation.3Q Menu button* When Windows is running, opens or closes the Q Menu.*This table describes default settings. For information about changing the functions of the Tablet PC Input launch button, rotate button, and Q Menu button, refer to Chapter 4, “Pen and Command Controls.”Component DescriptionComponent Description1Function keys Executes frequently used system functions when pressed in combination with the fn key.2Keypad keys Can be used like the keys on an external numeric keypad.

Tablet PC FeaturesHardware and Software Guide 1–9DRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmFront Components

1–10 Hardware and Software GuideTablet PC FeaturesDRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmComponent Description1Infrared port Provides wireless communication between the tablet PC and an optional IrDA-compliant device.2Bluetooth® antenna* Sends and receives Bluetooth device signals. ÅExposure to Radio Frequency Radiation. The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should be not less than 20 cm (8 inches) during normal operation, including when the tablet PC display is closed.3Display release latch Opens the tablet PC.*The antennae is available on only select models. The antennae is not visible from the outside of the tablet PC. For optimal transmission, keep the areas immediately around the antennae free from obstructions.

Tablet PC FeaturesHardware and Software Guide 1–11DRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmRear ComponentsComponent Description1USB port Connects USB 1.1- and 2.0-compliant devices to the tablet PC using a standard USB cable, or connects an optional external MultiBay or MultiBay II to the tablet PC. The external MultiBay must also be connected to an external power source.2RJ-11 (modem) jack Connects a modem cable.3RJ-45 (network) jack Connects a network cable.4Power connector Connects an AC adapter or an optional Automobile Power Adapter/Charger, or Aircraft Power Adapter.5External monitor port Connects an optional external monitor or overhead projector.

1–12 Hardware and Software GuideTablet PC FeaturesDRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm6S-Video out jack Is a 7-pin, dual-purpose jack.It connects an optional S-Video device, such as a television, VCR, camcorder, overhead projector, or video capture card, with an optional, standard (4-pin) S-Video cable.The extra 3 pins also enable an optional S-Video-to-composite adapter to be used with the tablet PC.4Jog dial* Functions like enter and the up and down arrow keys on a standard keyboard.■Press inward to enter a command.■Rotate upward to scroll upward.■Rotate downward to scroll downward.5Windows Security button* When pressed with the pen tip or a small object like the end of a paper clip while:■Windows is open, enters the ctrl+alt+delete command.†■The Setup utility is open, enters the reset command.*This table describes default settings. For information about changing the functions of the Windows security button and jog dial, refer to Chapter 4, “Pen and Command Controls.”†To protect your work and the system, the ctrl+alt+delete command cannot be entered using the Ctrl, Alt, and Del keys on the on-screen keyboard.Component Description

Tablet PC FeaturesHardware and Software Guide 1–13DRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmRight-Side ComponentsComponent Description1Audio-out (headphone) jack Produces system sound when connected to optional powered stereo speakers, headphones, headset, or television audio.2Audio-in (microphone) jack Connects an optional monaural or stereo microphone.3USB port Connects USB 1.1- and 2.0-compliant devices to the tablet PC using a standard USB cable, or connects an optional external MultiBay or MultiBay II to the tablet PC. The external MultiBay must also be connected to an external power source.

1–14 Hardware and Software GuideTablet PC FeaturesDRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm4PC Card eject button Ejects PC Cards from the PC Card slot.5PC Card slot Supports optional Type I, Type II, or Type III 32-bit (CardBus) or 16-bit PC Cards.6SD Card slot Accepts SD (Secure Digital) Memory Cards.Component Description

Tablet PC FeaturesHardware and Software Guide 1–15DRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmLeft-Side ComponentsComponent Description1Security cable slot Attaches an optional security cable to the tablet PC.ÄSecurity solutions are designed to act as deterrents. These deterrants may not prevent a product from being mishandled or stolen.2Vent Enables airflow to cool internal components.ÄTo prevent overheating, do not obstruct vents. Using the tablet PC on a soft surface, such as a pillow, blanket, rug, or thick clothing, may block airflow.3Wireless button* Turns on wireless LAN or Bluetooth.

1–16 Hardware and Software GuideTablet PC FeaturesDRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm4USB port Connects USB 1.1- and 2.0-compliant devices to the tablet PC using a standard USB cable, or connects an optional external MultiBay or external MultiBay II to the tablet PC. The external MultiBay must be connected to an external power source.5HP Information Center button content to come6Power/standby switch* When the tablet PC is■Off, slide to the left and release to turn on the tablet PC.■In Standby, slide to the right or left and release to exit Standby.■In Hibernation, slide to the right or left and release to exit Hibernation.■On, slide to the right and release to enter Standby.If the tablet PC has stopped responding and Microsoft® Windows® shutdown procedures cannot be used, slide to the left and hold for 5 seconds to turn off the tablet PC.7Speaker Produces tablet PC sound.8Pen holder Secures the pen to the tablet PC.*This table describes default settings. For information about changing the functions of the power features, refer to the “Managing Power Options”section in Chapter 2, “Power.” For inforamtion about changing the functions of the wireless features, refer to Chapter 8, “Wireless.”Component Description

Tablet PC FeaturesHardware and Software Guide 1–17DRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmBottom ComponentsComponent Description1Docking connector Connects the tablet PC to an optional docking device.2Vents (3) Enable airflow to cool internal components.ÄTo prevent overheating, do not obstruct vents. Using the tablet PC on a soft surface, such as a pillow, blanket, rug, or thick clothing, may block airflow.3Travel battery connector Connects an optional travel battery.4Hard drive bay Holds the primary hard drive.5Primary battery release latch Releases the primary battery pack from the battery bay. 6Primary battery bay Holds the primary battery pack.7Memory module compartmentContains one primary memory slot (populated).

1–18 Hardware and Software GuideTablet PC FeaturesDRAFT Revised: 8/24/04File: Chap1.fm PN: HP-367426-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmAdditional Hardware ComponentsComponent Description1AC adapter Converts AC power to DC power.2Power cord* Connects an AC adapter to an AC wall outlet.3Primary battery pack* Runs the tablet PC when the tablet PC is not connected to external power.4Modem adapter* Adapts the modem cable for a non-RJ-11 telephone jack.5Modem cable* Connects a modem to a telephone jack or a country-specific modem adapter.*Power cords, modem cables, and modem adapters vary in appearance by region and country. Battery packs vary by model.

Hardware and Software Guide 2–1DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm2PowerPower Control and Light Locations

2–2 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmComponent Description1fn+f3 Initiates Standby.2Power/standby switch When the tablet PC is■Off, slide to the left and release to turn on the tablet PC.■In Standby, slide to the right or left and release to exit Standby.■In Hibernation, slide to the right or left and release to exit Hibernation.■On, slide to the right and release to enter Standby.If the tablet PC has stopped responding and Microsoft® Windows® shutdown procedures cannot be used, slide to the left and hold for 5 seconds to turn off the tablet PC.3Power light Green: The tablet PC is on.

PowerHardware and Software Guide 2–3DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm4Standby light Blinking green: The tablet PC is in Standby mode.5Power/standby light Green: The tablet PC is on.Blinking green: The tablet PC is in Standby mode.6Battery light Amber: A battery pack is charging.Green: A battery pack is close to full charge capacity.Blinking amber: A battery pack that is the only available power source has reached a low-battery condition. When the battery reaches a critical low-battery condition, the battery light begins blinking more quickly.Off: If the notebook is connected to an external power source, the light is turned off when all batteries in the notebook are fully charged. If the notebook is not connected to an external power source, the light is turned off until the battery reaches a low-battery condition.Component Description

2–4 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmSelecting a Power SourceThe tablet PC can run on internal or external AC power. The following table indicates the best power sources for common tasks.Task Recommended Power SourceWork in most software applications ■Charged battery pack in the tablet PC■External power supplied through one of the following devices:❐AC adapter❐Optional docking device❐Optional Aircraft Adapter❐Optional Automobile Power Adapter/Charger❐Optional 90W Air/Auto/AC Combo AdapterCharge or calibrate a battery pack in the tablet PCExternal power supplied through■AC adapter■Optional docking device■Optional Automobile Power Adapter/Charger■Optional 90W Air/Auto/AC Combo AdapterÄTo prevent damage to the tablet PC and aircraft systems, do not charge the battery pack while you are using an Auto/Air/AC Adapter on an aircraft. Install or modify system software or write to a CDExternal power supplied through■AC adapter■Optional docking device

PowerHardware and Software Guide 2–5DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmStandby and HibernationStandby and Hibernation are energy-saving features that conserve power and reduce startup time. They can be initiated by you or by the system. Refer to the “Initiating Standby, Hibernation or Shutdown” section in this chapter for details about when to use each setting.StandbyÄCAUTION: To avoid a complete battery discharge, do not leave your tablet PC in Standby for extended periods. Connect the tablet PC to an external power source.Standby reduces power to system components that are not in use. When Standby is initiated, your work is saved in random access memory (RAM) and the screen is cleared. When you resume from Standby, your work returns to the screen where you left off.■Saving your work before initiating Standby is not usually necessary but is a recommended precaution.■When the tablet PC is in Standby, the standby light and the power/standby light flash.HibernationHibernation saves your work to a hibernation file on the hard drive, and then shuts down the tablet PC. When you restore from Hibernation, your work returns to the screen where you left off. If a power-on password has been set, the password must be entered to restore from Hibernation.You can disable Hibernation. However, if Hibernation is disabled, and the system reaches a low-battery condition, the system will not automatically save your work while power is on or when Standby has been initiated.In the Power Options window, Hibernation is not displayed as an option if it has been disabled. You must enable Hibernation in order to select it in the Power Options window. To verify that

2–6 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmHibernation is enabled, select Start > Control Panel > Power Options > Hibernate tab. Make sure that the Enable hibernate support check box is selected.ÄCAUTION: If the configuration of the tablet PC is changed during Hibernation, resuming from Hibernation may not be possible. When the tablet PC is in Hibernation:■Do not dock or undock the tablet PC in a docking device.■Do not add or remove memory modules.■Do not insert or remove any hard drives.■Do not connect or disconnect external devices.■Do not insert or remove a PC Card or a Secure Digital (SD) Memory Card.Initiating Standby, Hibernation or ShutdownThe following sections explain when to initiate Standby or Hibernation and when to shut down your tablet PC.When You Leave Your WorkInitiating Standby clears the screen and uses less power than leaving the tablet PC on. Your work returns instantly to the screen when you resume from Standby.Initiating Hibernation clears the screen, saves your work to the hard drive, and uses much less power than Standby.Shutting down the tablet PC and removing the battery pack is recommended to extend the life of the battery pack when the tablet PC will be disconnected from external power for an extended period. For details on battery pack storage, refer to the “Storing a Battery Pack” section in this chapter.

PowerHardware and Software Guide 2–7DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmWhen the Power Supply Is UncertainMake sure that Hibernation remains enabled, especially if you are operating the tablet PC on battery power and do not have access to an external power supply. If the battery pack fails, Hibernation saves your work to a hibernation file and shuts down the tablet PC.HP recommends that if you pause your work when the power supply is uncertain, you do one of the following:■Initiate Hibernation.■Shut down the tablet PC.■Save your work, and then initiate Standby.When Using Infrared Communication or Drive MediaÄCAUTION: Do not initiate Standby or Hibernation while using drive media. Doing so may result in possible video and audio degradation and loss of audio or video playback functionality.Standby and Hibernation interfere with the use of infrared and Bluetooth communication, and drive media. Note the following guidelines:■If the tablet PC is in Standby or Hibernation, you cannot initiate an infrared or Bluetooth transmission.■If Standby or Hibernation is accidentally initiated while a drive medium (such as a diskette, CD, or DVD) is in use:❏Your playback may be interrupted.❏You may see a warning message: “Putting the computer into Hibernation or Standby may stop the playback. Do you want to continue?” Select No.❏You may need to restart the playback to resume audio and video.

2–8 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing the Default Power SettingsThe following tables describe the factory power settings on the tablet PC. You can change many of these settings according to your preference. For more information on changing power settings, refer to the “Managing Power Options” section in this chapter.Turning the Tablet PC or Display On or OffTask Procedure ResultTurn on the tablet PC.Slide the power/standby switch to the left.■The power light and the power/standby light are turned on.■The operating system loads.Shut down the tablet PC.*Save your work and close all open applications. Then■Slide the power/standby switch to the left and follow the on-screen directions (if displayed) for shutting down the tablet PC.■Shut down the tablet PC through the operating system. Select Start > Shut Down> Shut Down > OK.■The power light and power/standby light are turned off.■The operating system shuts down.■The tablet PC is turned off.Turn off the display while the power is on.Close the tablet PC. Closing the tablet PC activates the display switch, which turns off the display. This conserves battery power.* If the system is unresponsive and you are unable to shut down the tablet PC with these procedures, refer to the “Using Emergency Shutdown Procedures”section in this chapter.

PowerHardware and Software Guide 2–9DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmInitiating or Restoring from HibernationTask Procedure ResultInitiateHibernation.■Select Start > Shut Down> Hibernate > OK. (If the Hibernate option is not displayed, press and hold the shift key.)■If Hibernation has been configured, slide the power/standby switch to the right or left.■The power light and power/standby light are turned off.■The screen clears.Allow the system to initiate Hibernation (withHibernation enabled).No action required.■If the tablet PC is running on battery power, the system initiates Hibernation after 30 minutes of tablet PC inactivity or when the battery pack(s) reach a critical low-battery condition.■If the tablet PC is connected to external power, the system does not initiate Hibernation.■Power settings and timeouts can be changed in the Power Options window.■The power light and power/standby light are turned off.■The screen clears.Restoring from user-initiated or system-initiatedHibernation.Slide the power/standby switch to the right or left.✎If the system initiated Hibernation because of a critical low-battery condition, connect external power or insert a charged battery pack before you slide the power/standby switch.■The power light and power/standby light are turned on.■Yo u r w o r k r e t u r n s to the screen.

2–10 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmInitiating or Resuming from StandbyTask Procedure ResultInitiate Standby. ■Slide the power/standby switch to the right.■With the tablet PC on, press fn+f3.■Select Start > Shut Down> Standby > OK. (If the Standby option is not displayed, press the shift key.)■The power light and power/standby light blink.■The screen clears.Allow the system to initiate Standby.No action required.■If the tablet PC is running on battery power, the system initiates Standby after 10 minutes of tablet PC inactivity. (Default setting)■If the tablet PC is attached to external power, the system does not initiate Standby.■Power settings and timeouts can be changed in the Power Options window.■The standby light and power/standby light blink.■The screen clears.Resume from user-initiated or system-initiatedStandby.■Slide the power/standby switch to the right or left.■If the display was closed while the tablet PC was in Standby, open the display.■The standby light and power/standby light are turned off.■Your work returns to the screen.

PowerHardware and Software Guide 2–11DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing Emergency Shutdown ProceduresÄCAUTION: Emergency shutdown procedures result in the loss of unsaved data.If the tablet PC is unresponsive and you are unable to use normal Windows shutdown procedures, try the following emergency procedures, in the sequence provided:■Press ctrl+alt+delete. Select Shut Down.■Slide and hold the power/standby switch to the left for at least 5 seconds.■Disconnect the tablet PC from external power and remove the battery pack. For more information about removing and storing the battery pack, refer to the “Storing a Battery Pack” section in this chapter.Managing Power OptionsMany default power settings can be changed in the Power Options window. For example, you can set an audio alert to warn you when the battery pack reaches a low-power condition, or you can change the default settings for the power/standby switch.By default, when the tablet PC is on:■Pressing the power/standby switch to the right initiates Standby.■Pressing the fn+f3 hotkey, called the “sleep button” in the operating system, initiates Standby.■The display switch turns off the display. The display switch is activated by closing the display. (By default and when using custom settings, the display switch also turns on the tablet PC if the display is opened while the tablet PC is in Standby.)

2–12 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmAccessing the Power Options WindowTo access the Power Options window, double-click the Power Meter icon on the taskbar, or select Start > Control Panel > Power Options.Displaying the Power Meter IconThe Power Meter icon is on your taskbar by default. The icon changes shape to indicate whether the tablet PC is running on a battery pack or external power. Double-click the icon to display the Power Options window.To hide or show the Power Meter icon on the taskbar:1. Access the Power Options window.2. Select the Advanced tab.3. Select or clear the Always show icon on the taskbar check box.4. Select Apply.5. Select OK.✎If you cannot see an icon you have placed on the taskbar, the icon may be hidden. Select the arrow or vertical bar on the taskbar and expand it to view hidden icons.Setting or Changing a Power SchemeThe Power Schemes tab in the Power Options window assigns power levels to system components. You can assign different schemes depending on whether the tablet PC is running on a battery pack or external power.You can also set a power scheme that initiates Standby or turns off the display or hard drive after a time interval that you specify.

PowerHardware and Software Guide 2–13DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmTo set a power scheme:1. Access the Power Options window, and then select the Power Schemes tab.2. Select the power scheme you wish to modify, and adjust options in the lists on the screen.3. Select Apply.Using a Security PasswordYou can add a security feature that prompts you for a password when the tablet PC is turned on or restores from Standby or Hibernation.To set a password prompt, access the Power Options window, and then select the Advanced tab. Select the check box for Prompt for password when the computer resumes from Standby, and select Apply.For more information about using security passwords, refer to Chapter 9, “Security.”Processor Performance ControlsOn select tablet PC models, Windows XP supports software that enables you to control processor performance. The central processing unit (CPU) speed can be set for optimal performance or for optimal power conservation.For example, the software can be set to trigger an automatic change in processor speed when the power source changes from external power to battery pack power, or when the tablet PC use changes between active and idle.Processor performance controls are managed in the Power Options window.To access Windows XP processor performance controls, select Start > Control Panel > Power Options > Power Schemes tab.

2–14 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmThe power scheme you select determines how the processor performs when the tablet PC is connected to external power or is running on battery power. Each power scheme for external power or battery power sets a specific processor state.Different states may be used, depending on whether the tablet PC is running on external or battery power. After a power scheme has been set, no other intervention is required to control the performance of your tablet PC processor. The following table describes the processor performance on external and battery power for the available power schemes.Power SchemeProcessor Performance While on External Power Processor Performance While on Battery Power Home/Office Desk Always runs at the highest performance state.Performance state is determined based on CPU demand.Portable/Laptop Performance state is determined based on CPU demand.Performance state is determined based on CPU demand.Presentation Performance state is determined based on CPU demand.Starts at lowest performance state, then uses linear performance reduction (stop-clock throttling) as the battery discharges.

PowerHardware and Software Guide 2–15DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing Battery PacksWhen the tablet PC is connected to external AC power, the tablet PC runs on AC power. When a charged battery pack is in the tablet PC and the tablet PC is not connected to external power, the tablet PC runs on battery power.The tablet PC switches between AC power and battery power according to the availability of an external AC power source. For example, if the tablet PC contains a charged battery pack and is running on external AC power supplied through the AC adapter, the tablet PC switches to battery power if the AC adapter is disconnected from the tablet PC.You can leave a battery pack in the tablet PC or in storage, depending on how you work. Keeping a battery pack in the tablet PC enables the battery pack to charge whenever the tablet PC is connected to external AC power and also protects your work in case of a power outage.Always On Always runs at the highest performance state.Always runs at the highest performance state.Minimal Power ManagementPerformance state is determined based on CPU demand.Performance state is determined based on CPU demand.Max Battery Performance state is determined based on CPU demand.Starts at lowest performance state, then uses linear performance reduction (stop-clock throttling) as the battery discharges.Power SchemeProcessor Performance While on External Power Processor Performance While on Battery Power

2–16 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmHowever, battery packs in the tablet PC slowly discharge when the tablet PC is turned off. For this reason, the primary battery pack is not shipped inside the tablet PC and must be inserted before the tablet PC can run on battery power.Identifying Battery PacksThis tablet PC supports up to 2 battery packs:■The primary battery pack is a 6-cell lithium-ion battery pack that can be used only in the battery bay. One primary battery pack is included with the tablet PC.■The travel battery pack is an optional 8-cell lithium-ion battery pack that can be used only in the travel battery case.If you will not be using the tablet PC for 2 weeks or more, remove the battery pack and store it as described in the “Storing a Battery Pack” section in this chapter to prolong battery pack life. For more information about leaving your work, refer to the “InitiatingStandby, Hibernation or Shutdown” section in this chapter.✎Only compatible AC adapters and battery packs should be used with the tablet PC. For additional information, visit the HP Web site at http://www.hp.com or use the Worldwide Telephone Numbersbooklet, included with your tablet PC, to contact Customer Care.Inserting or Removing a Primary Battery PackÄCAUTION: To prevent loss of work when removing a battery pack that is the sole power source, initiate Hibernation or turn off the tablet PC before removing the battery pack.To insert a primary battery pack:1. Turn the tablet PC upside down.2. Slide the battery pack 1 into the battery bay until it is seated.

PowerHardware and Software Guide 2–17DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm3. Press the battery pack 2 into the tablet PC.

2–18 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmTo remove a primary battery pack:1. Turn the tablet PC upside down with the battery bay toward you.2. Press the battery release latch 1 to the right.3. Slide the battery pack 2 out of the tablet PC.Attaching or Detaching an Optional Travel BatteryTo attach an optional travel battery:1. Turn the tablet PC upside down with the primary battery bay toward you.

PowerHardware and Software Guide 2–19DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm2. Open the travel battery connector on the bottom of the tablet PC by sliding the cover to the right.

2–20 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm3. Insert the tabs on the travel battery caddy into the recesses on the bottom of the tablet PC 1.4. Press the travel battery caddy onto the tablet PC until it snaps into place 2.5. Slide the locking latch 3.

PowerHardware and Software Guide 2–21DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmTo detach an optional travel battery:1. Unlock the travel battery from the tablet PC by sliding the locking switch 1.2. Press the release latch 2.3. Lift the travel battery 3 up and away from the tablet PC.Charging Battery PacksMultiple battery packs in the system charge and discharge in a preset sequence:■Charge sequence:1. Primary battery in the tablet PC battery bay2. Travel battery■Discharge sequence:1. Travel battery2. Primary battery in the tablet PC battery bay

2–22 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmWhile a battery pack is charging, the battery light on the tablet PC is on. The light is turned off when all battery packs are fully charged.✎Battery packs can also be charged in the optional HP Universal Charger. Charging the Primary BatteryÄCAUTION: To prevent damage to the tablet PC and aircraft systems, do not charge the battery pack while you are using an Auto/Air/AC Adapter on an aircraft.The primary battery pack charges when it is inserted into the tablet PC and the tablet PC is connected to external power. External power can be supplied through the following:■AC adapter■Optional docking device■Optional Automobile Power Adapter/Charger

PowerHardware and Software Guide 2–23DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm■Optional 90W Air/Auto/AC Combo Adapter✎An optional Aircraft Power Adapter can run the tablet PC, but it cannot charge a battery pack.Charging an Optional Travel BatteryThe battery pack in the travel battery charges when it is attached to the tablet PC and the tablet PC is connected to external power. External power can be supplied through the following:■AC Adapter■Optional docking device■Optional Automobile Power Adapter/Charger■Optional 90W Air/Auto/AC Combo Adapter✎Because the travel battery covers the docking connector, the travel battery cannot be used or charged with a docking device.✎An optional Aircraft Power Adapter can run the tablet PC, but it cannot charge a battery pack.Charging a New Battery PackFully charge the battery pack while the tablet PC is connected to external power through the AC adapter.A new battery pack that has been partially but not fully charged can run the tablet PC, but the battery charge indicators may be inaccurate.Charging an In-Use Battery PackTo prolong battery life and increase the accuracy of battery charge indicators:

2–24 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm■Allow a battery pack to discharge to 10 percent of a full charge through normal use before charging it.■When you charge a battery pack, charge it fully.Monitoring the Charge of a Battery PackThis section explains several ways you can determine the amount of charge in your battery pack.Obtaining Accurate Charge InformationTo increase the accuracy of all battery charge displays:■Allow a battery pack to discharge to about 10 percent of a full charge through normal use before charging it.■When you charge a battery pack, charge it fully.■If a battery pack has not been used for one month or more, calibrate the battery pack instead of simply charging it. For calibration instructions, refer to the “Calibrating a Battery Pack” section in this chapter.Displaying Charge Information on the ScreenThis section explains how to access and interpret battery charge displays.

PowerHardware and Software Guide 2–25DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmViewing Charge DisplaysTo view information about the status of any battery pack in the tablet PC:■Select the Power Meter icon on the taskbar.-or-■Select Start > Control Panel > Power Options > Power Meter tab.Interpreting Charge DisplaysMost charge displays report battery status as both a percentage and as the number of minutes of charge remaining.■The percentage indicates the amount of charge remaining in the battery pack.■The time indicates the approximate running time remaining on the battery pack if the battery pack continues to provide power at the current level. For example, the time remaining will decrease when you start playing a DVD and will increase when you stop playing a DVD.Most charge displays identify battery packs by location:■Location 1 is the battery pack in the primary battery bay.■Location 2 is the optional travel battery pack.On some displays, a lightning bolt icon may be displayed on the charge display beside a battery pack location. The icon indicates that the battery pack in that location is charging.Managing Low-Battery ConditionsSome low-battery condition alerts and system responses can be changed in the Power Options window of the operating system. The information in this section describes the alerts and system responses set at the factory. Preferences set in the Power Options window do not affect lights.

2–26 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmIdentifying Low-Battery ConditionsThis section explains how to identify low and critical low-battery conditions.Low-Battery ConditionWhen a battery pack that is the only power source for the tablet PC reaches a low-battery condition, the battery light blinks.Critical Low-Battery ConditionIf a low-battery condition is not resolved, the tablet PC enters a critical low-battery condition.In a critical low-battery condition:■If Hibernation is enabled and the tablet PC is on or in Standby, the tablet PC initiates Hibernation.■If Hibernation is disabled and the tablet PC is on or in Standby, the tablet PC remains briefly in Standby, then shuts down and loses your unsaved work.To verify that Hibernation is enabled, select Start > Control Panel > Power Options > Hibernate tab. Make sure that the Enable hibernate support check box is selected.Resolving Low-Battery ConditionsÄCAUTION: If the tablet PC has reached a critical low-battery condition and has initiated Hibernation, do not restore power until the power/standby light is turned off.

PowerHardware and Software Guide 2–27DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmWhen External Power Is AvailableTo resolve a low-battery condition when external power is available, do one of the following:■Connect the AC adapter.■Plug an optional Automobile Power Adapter/Charger into the tablet PC and into a vehicle cigarette lighter receptacle.■Plug an optional 90W Air/Auto/AC Combo Adapter into the tablet PC and into a vehicle cigarette lighter receptacle or into the in-seat power supply available on some commercial aircraft.ÄTo prevent damage to the tablet PC and aircraft systems, donot charge the battery pack while you are using an Auto/Air/AC Adapter on an aircraft.■Plug an optional Aircraft Power Adapter into the tablet PC and into the in-seat power supply available on some commercial aircraft. (An optional Aircraft Power Adapter can run the tablet PC but cannot charge a battery pack.)When a Charged Battery Pack Is AvailableTo resolve a low-battery condition when a charged battery pack is available, turn off the tablet PC or initiate Hibernation, insert a charged battery pack, and then turn on the tablet PC.When No Power Source Is AvailableTo resolve a low-battery condition when no power source is available, initiate Hibernation, or save your work and shut down the tablet PC.When theTablet PC Cannot Exit HibernationTo resolve a low-battery condition when the tablet PC lacks the power to exit Hibernation:1. Insert a charged battery pack or connect external power.

2–28 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm2. Exit Hibernation by pressing the power/standby switch to the right or left.Calibrating a Battery PackThis section describes when and how to calibrate a battery pack.When to CalibrateEven if a battery pack is heavily used, it should not be necessary to calibrate it more than once a month. It is not necessary to calibrate a new battery pack before first use. Calibrate the battery pack under the following conditions:■When battery charge displays seem inaccurate.■When you observe a significant decrease in battery run time.■When the battery pack has been unused for one month or more.How to CalibrateTo calibrate a battery pack, you must fully charge, fully discharge, then fully recharge the battery pack.Charging the Battery PackA battery pack can charge whether the tablet PC is off or in use, but it will charge faster when the tablet PC is off.To charge the battery pack:1. Insert the battery pack into the tablet PC.2. Connect the tablet PC to an AC outlet or an optional Automobile Power Adapter/Charger. The battery light on the tablet PC is turned on.3. Leave the tablet PC connected to external power until the battery pack is fully charged. The battery light on the tablet PC is turned off.

PowerHardware and Software Guide 2–29DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmDischarging the Battery PackBefore you begin a full discharge, disable Hibernation. To disable Hibernation:1. Select Start > Control Panel > Power Options > Hibernatetab.2. Clear the Enable Hibernation check box.3. Select Apply.The tablet PC must remain on while the battery pack is being discharged. The battery pack can discharge whether or not you are using the tablet PC, but will discharge faster while the tablet PC is in use.■If you plan to leave the tablet PC unattended during the discharge, save your work before beginning the discharge procedure.■If you use the tablet PC occasionally during the discharge procedure and have set energy-saving timeouts, expect the following performance from your system during the discharge process:❏The monitor will not turn off automatically.❏Hard drive speed will not decrease automatically while the tablet PC is idle.❏System-initiated Standby will not occur.To fully discharge a battery pack:1. Select the Power Meter icon on the taskbar, or access the Power Schemes tab by selecting Start > Control Panel > Power Options > Power Schemes tab.2. Make a note of the 2 settings in the Plugged In column and the 2 settings in the Running on Batteries column so that you can reset them after the calibration.3. Use the drop-down lists to set the 4 options (2 in each column) to Never.

2–30 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm4. Select OK.5. Disconnect the tablet PC from the external power source, but do not turn off the tablet PC.6. Run the tablet PC on battery power until the battery pack is fully discharged. The battery light begins to blink when the battery pack has discharged to a low-battery condition. When the battery pack is fully discharged, the battery light is turned off and the tablet PC shuts down.Recharging the Battery PackTo recharge the battery pack:1. Connect the tablet PC to external power and maintain the connection until the battery pack is fully recharged. The battery light on the tablet PC is turned off.You can use the tablet PC while the battery pack is recharging but the battery pack will charge faster if the tablet PC is off.2. If the tablet PC is off, turn it on when the battery pack is fully charged and the battery light is turned off.3. Access the Power Schemes tab by selecting Start > Control Panel > Power Options > Power Schemes tab.4. Refer to the settings you recorded earlier. Reenter the settings that you recorded for the items in the Plugged In column and the Running on Batteries column.5. Select OK.ÄCAUTION: After calibrating the battery pack, reenable Hibernation. Failure to reenable Hibernation may result in a complete battery drain and potential data loss.To reenable Hibernation, select Start > Settings > Control Panel > Power Options > Hibernate tab. Select the Enable Hibernationcheck box, and then select Apply.

PowerHardware and Software Guide 2–31DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmConserving Battery PowerUsing the battery conservation procedures and settings described in this section extends the time that a battery pack can run the tablet PC from a single charge.Conserving Power As You WorkTo conserve power as you use the tablet PC:■Turn off wireless and local area network (LAN) connections and exit modem applications when you are not using them.■Disconnect external devices you are not using that are not connected to an external power source.■Stop or remove a PC Card you are not using. For more information, refer to Chapter 6, “Hardware Components.”■Use the fn+f9 and fn+f10 hotkeys to adjust screen brightness as you need it.■Use optional powered speakers instead of the internal speakers, or use the volume buttons to adjust system volume as you need it.■Turn off a device connected to the S-Video out jack by using the fn+f4 hotkey or by turning off support for the device in Windows.■Run the tablet PC on external power while formatting a diskette.■If you leave your work, initiate Standby or Hibernation or shut down the tablet PC.

2–32 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmSelecting Power Conservation SettingsTo set the tablet PC to conserve power:■Select a short wait for the screen saver and select a screen saver with minimal graphics and motion. To access screen saver settings, select Start > Control Panel > Display > Screen Saver tab.■Select a Power Scheme with low-power-use settings through the operating system. Refer to the “Setting or Changing a Power Scheme” section in this chapter.Storing a Battery PackIf a tablet PC will be unused and unplugged for more than 2 weeks, remove any battery packs and store them separately.ÄCAUTION: To prevent damage to a battery pack, do not expose it to high temperatures for extended periods of time.High temperatures accelerate the self-discharge rate of a stored battery pack. To prolong the charge of a stored battery pack, place it in a cool, dry place.Use the following table to estimate how long you can safely store a battery pack. The storage times provided are based on a battery pack that contains 50 percent of a full charge. A fully charged battery pack can be safely stored for longer times; a battery pack containing a lower charge can be safely stored for less time.Calibrate a battery pack that has been stored for one month or more before using it.Temperature Range °FTemperature Range °C Safe Storage Time115° to 140° 46° to 60° Less than 1 month79° to 113° 26° to 45° No more than 3 months32° to 77° 0° to 25° 1 year

PowerHardware and Software Guide 2–33DRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmDisposing of a Used Battery PackÅWARNING: There is a risk of fire and chemical burn if a battery pack is handled improperly. Do not disassemble, crush, or puncture a battery pack or short the contacts on a battery pack. Do not expose a battery pack to temperatures higher than 60°C (140°F), or dispose of a battery pack in water or fire.When a battery pack has reached the end of its useful life, do not dispose of it in general household waste.■In Europe, dispose of or recycle battery packs by using the public collection system or by returning them to HP, your authorized HP service partners, or their agents.■In other regions, refer to the Worldwide Telephone Numbers booklet, included with the tablet PC, to contact Customer Care and request information about battery pack disposal.For more information about battery pack precautions and disposal and the complete text of governmental agency notices, refer to the Regulatory and Safety Notices guide on the Tablet PC Documentation CD.

2–34 Hardware and Software GuidePowerDRAFT Revised: 8/24/04File: Chap2.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm

Hardware and Software Guide 3–1DRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm3Pointing Devices and KeyboardUsing a Pointing DeviceThe pointing stick and TouchPad controls can be used interchangeably.Component Description1Pointing stick Moves the pointer and selects or activates items on the screen.2Right pointing stick button Functions like the right button on an external mouse.3Touchpad scroll zone* Scrolls upward or downward.

3–2 Hardware and Software GuidePointing Devices and KeyboardDRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing the Pointing StickTo move the pointer, press the pointing stick in the direction you want to move the pointer. Use the left and right pointing stick buttons as you would the left and right buttons on an external mouse.4Right TouchPad button* Functions like the right button on an external mouse.5Left TouchPad button* Functions like the left button on an external mouse.6TouchPad* Moves the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling, selecting, and double-clicking.7Left pointing stick button Functions like the left button on an external mouse.*This table describes default settings. For information about changing the functions of TouchPad features, refer to the “Setting Pointing Device Preferences” section in this chapter.Component Description

Pointing Devices and KeyboardHardware and Software Guide 3–3DRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmTo change the pointing stick cap:1. Turn off the tablet PC.2. Gently pull off the used pointing stick cap.3. Press a replacement cap into place.✎Replacement caps are not included with the tablet PC.Using the TouchPadTo move the pointer, slide your finger across the TouchPad surface in the direction you want the pointer to go. Use the left and right TouchPad buttons as you would the left and right buttons on an external mouse. To scroll up and down using the TouchPad vertical scroll zone, slide your finger up or down over the raised area.

3–4 Hardware and Software GuidePointing Devices and KeyboardDRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing an External MouseAn external USB mouse can be connected to the tablet PC using one of the ports on the right or left side of the tablet PC. An external serial mouse can be connected to the serial port on the right side of the tablet PC. An external PS/2 or USB mouse can be connected to the system using the connectors on an optional docking device.Setting Pointing Device PreferencesMouse Properties in Windows enables you to customize settings for pointing devices, including■Enabling or disabling a pointing device (enabled by default).■TouchPad tapping, which enables you to tap the TouchPad once to select an object or twice to double-click an object (disabled by default).■Edge motion, which enables you to continue to scroll even though your finger has reached the edge of the TouchPad (disabled by default).■Palm Check, which helps prevent moving the pointer unintentionally if your palms contact the TouchPad as you type (disabled by default).Other features, such as mouse speed preferences and mouse trails, are also found in the Mouse Properties window.To access Mouse Properties: »Select Start > Control Panel > Mouse icon.

Pointing Devices and KeyboardHardware and Software Guide 3–5DRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing HotkeysHotkeys are preset combinations of the fn key 1, one of the function keys 2, or the esc key 3,The icons on the f3,f4, and f8 through f10 keys represent the hotkey functions. Hotkey functions and procedures are discussed in the following sections.

3–6 Hardware and Software GuidePointing Devices and KeyboardDRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmHotkey and Shortcut Key Quick ReferenceInitiating Standby (fn+f3)When the tablet PC is on, press the fn+f3 hotkey to initiateStandby. When Standby is initiated, your work is saved in random access memory (RAM), the screen is cleared, and power is conserved. While the tablet PC is in Standby, the standby light and the power/standby light blink.To exit Standby, press the power/standby switch to the right or left.The fn+f3 hotkey is set at the factory to initiate Standby. The function of the fn+f3 hotkey, called the “sleep button” in Windows, can be changed. For example, the fn+f3 hotkey can be set to initiate Hibernation instead of Standby. For more information about Standby, Hibernation, and changing the function of the fn+f3 hotkey, refer to Chapter 2, “Power.”FunctionKey combination to activate functionKey combination to deactivate functionInitiate Standby fn+f3 Power/standby switchSwitch between tablet PC display and external displayfn+f4 fn+f4View battery information fn+f8 fn+f8Decrease screen brightnessfn+f9 N/AIncrease screen brightnessfn+f10 N/ADisplay system informationfn+esc fn+esc

Pointing Devices and KeyboardHardware and Software Guide 3–7DRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmSwitching Displays (fn+f4)The fn+f4 hotkey switches the image among display devices connected to the external monitor connector or the S-Video jack on the tablet PC. For example, if an external monitor is connected to the tablet PC, pressing the fn+f4 hotkey multiple times toggles the image between the tablet PC display, the external monitor display, and a simultaneous display on both the tablet PC and the monitor.Most external monitors receive video information from the tablet PC using the external VGA video standard. The fn+f4 hotkey can also toggle images among other devices receiving video information from the tablet PC.The following five video transmission types, with examples of devices that use them, are supported by the fn+f4 hotkey:■LCD (tablet PC display)■External VGA (most external monitors)■S-Video (televisions, camcorders, VCRs, and video capture boards with S-Video in jacks)■Composite video (televisions, camcorders, VCRs, and video capture boards with composite-video in jacks)■DVI-D (external monitors that support the DVI-D interface)✎DVI-D can be connected to the tablet PC only when the notebook is docked in an optional docking device.Viewing Battery Charge Information (fn+f8)Press fn+f8 to display charge information for all installed battery packs. The display indicates which battery packs are charging and reports the amount of charge remaining in each battery pack.Battery pack locations are indicated by number:■Location 1 is the primary battery pack.■Location 2 is the travel battery pack.

3–8 Hardware and Software GuidePointing Devices and KeyboardDRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmDecreasing Screen Brightness (fn+f9)Press fn+f9 to decrease screen brightness. Hold down the hotkey to decrease the brightness level incrementally.Increasing Screen Brightness (fn+f10)Press fn+f10 to increase screen brightness. Hold down the hotkey to increase the brightness level incrementally.Ambient Light Sensor (fn+f11)Press fn+f11 to turn on and off the ambient light sensor. For more information about the ambient light sensor, refer to the “Settingthe Ambient Light Sensor” section in this chapter.Displaying System Information (fn+esc)Press fn+esc to display information about system hardware components and software version numbers. Press fn+esc a second time to remove the system information from the screen.✎The system BIOS date is the version number of the system ROM. The BIOS date may display in a decimal format, such as 10/19/2002 F.07.Using Hotkeys with External KeyboardsThe hotkeys available for use with optional external keyboards differ depending on the type of external keyboard you use. USB keyboards support only the Hotkey functions controlled by the Quick Launch Buttons control panel. For more information about the Quick Launch Buttons control panel, refer to the “QuickLaunch Buttons Control Panel” section later in this chapter.

Pointing Devices and KeyboardHardware and Software Guide 3–9DRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmThe following table describes how certain hotkeys and shortcut keys are used on external keyboards:KeypadsThe tablet PC has an embedded numeric keypad and also supports an optional external keypad or an optional external keyboard that includes a numeric keypad.Using the Internal KeypadThe 15 keys of the embedded numeric keypad can be used like the keys on an external numeric keypad. When the embedded numeric keypad is turned on, each key on the keypad performs the function indicated by the icon in the upper right corner of the key.Tablet PC Keys External Keyboard Keysfn+f3 scroll lock+scroll lock+f3 (PS/2keyboards only)fn+f4 scroll lock+scroll lock+f4 (PS/2keyboards only)fn+f8 scroll lock+scroll lock+f8fn+f9 scroll lock+scroll lock+f9 (PS/2keyboards only)fn+f10 scroll lock+scroll lock+f10 (PS/2keyboards only)fn+f11 scroll lock+scroll lock+f11fn+esc scroll lock+scroll lock+esc

3–10 Hardware and Software GuidePointing Devices and KeyboardDRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmEnabling and Disabling the Embedded Numeric KeypadPress fn+num lk to enable the embedded numeric keypad. The num lock light is turned on. Press fn+num lk again to return the keys to their standard keyboard functions.✎The embedded numeric keypad does not work while an external keyboard or numeric keypad is connected to the tablet PC or to an optional docking device.Item Component1fn key2num lock light3num lk key4Embedded numeric keypad

Pointing Devices and KeyboardHardware and Software Guide 3–11DRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmSwitching Key Functions on the Embedded Numeric KeypadYou can temporarily switch the functions of keys on the embedded numeric keypad between their standard keyboard functions and their keypad functions by using the fn key or the fn+shift key combination.■To change the function of a keypad key to keypad functions while the keypad is off, press and hold the fn key while pressing the keypad key.■To use the keypad keys temporarily as standard keys while the keypad is on:❏Press and hold the fn key to type in lowercase.❏Press and hold fn+shift to type in uppercase.Using an External KeypadMost keys on most external keypads function differently according to whether num lock mode is on or off. For example:■When num lock is on, most keypad keys type numbers.■When num lock is off, most keypad keys function like the arrow, page up, or page down keys.When num lock on an external keypad is turned on, the num lock light on the tablet PC is turned on. When num lock on an external keypad is turned off, the num lock light on the tablet PC is turned off.If an external numeric keypad is connected, the embedded numeric keypad cannot be turned on.Enabling or Disabling Num Lock Mode As You WorkTo turn num lock on or off on an external numeric keypad as you work, press the num lk key on the external numeric keypad, not on the tablet PC.

3–12 Hardware and Software GuidePointing Devices and KeyboardDRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmEnabling or Disabling Num Lock Mode As You WorkTo turn num lock on or off on an external keypad as you work, press the num lk key on the external keypad, not on the tablet PC.Using Presentation ModeThe Presentation mode button toggles Presentation mode on and off. Turning Presentation mode on opens an application, folder, file, or Web site that you specify. The image simultaneously displays on the tablet PC screen and on an external device connected to the external monitor port or S-Video out jack on the rear panel, or to ports and jacks on an optional docking device.When you first select the Presentation mode button, the Presentation Settings dialog box displays. In this dialog box, you can■Set the program to start when the button is pressed.■Choose a power scheme.■Choose whether you want to show the Presentation Settings dialog box each time you press Presentation mode button.

Pointing Devices and KeyboardHardware and Software Guide 3–13DRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm✎If you do not select this option, each time you press the Presentation mode button, the Presentation Settings dialog box displays and you have to select Continue to open the program, application, folder, file, or Web site you have selected to start when the button is pressed.■Automatically switch to an external display.You can modify the Presentation mode settings using the Quick Launch Button control panel. Refer to “Setting Presentation Mode Preferences” in this chapter for information on setting Presentation mode settings.Using Quick Launch ButtonsThe tablet PC has two Quick Launch buttons that open frequently used applications when you press them.

3–14 Hardware and Software GuidePointing Devices and KeyboardDRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmQuick Launch Buttons Control PanelYou can use the Quick Launch Buttons control panel to■Change Presentation mode settings.■Set advanced preferences, including❏Setting preferences for the display of the Quick Launch Buttons icon.❏Setting preferences for the ambient light sensor.The following sections provide instructions for setting preferences within the control panel. For additional on-screen information about any item on the control panel, select the help button in the upper-right corner of the window. The help button is identified by a question mark icon.Accessing the Quick Launch Buttons Control PanelYou can access the Quick Launch Buttons control panel from the Start button or from an icon that you can display in the notification area (at the far right of the taskbar) or Windows desktop. To access the Quick Launch Buttons control panel from the Start button: »Select Start > Control Panel > Printers and Other Hardware > Quick Launch Buttons.Item Component Description1Presentation mode button Starts Presentation mode, which optimizes for an external monitor or projects and opens a user-defined program such as Microsoft PowerPoint.2HP Information Center button content to come.

Pointing Devices and KeyboardHardware and Software Guide 3–15DRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmSetting Presentation Mode PreferencesSetting the Presentation Mode ButtonTo set an application, folder, file, or Web site to start when the Presentation mode button is pressed:1. Open the Quick Launch Buttons control panel:❏Select Start > Control Panel > Printers and Other Hardware > Quick Launch Buttons.- or -❏Select the Quick Launch Buttons icon in the notification area (at the far right of the taskbar) or Windows desktop.2. Select the Presentation tab.3. In the box under Program to Start, add the application, folder, file, or Web site you want to start when the Presentation mode button is pressed, or select Browse to view available applications, folders, files, or Web sites.4. To save your preferences and close the display, select OK.Changing the Power SchemeBy default the Presentation power scheme is selected when the Presentation mode button is pressed. To change the power scheme:1. Open the Quick Launch Buttons control panel:❏Select Start > Control Panel > Printers and Other Hardware > Quick Launch Buttons.- or -❏Select the Quick Launch Buttons icon in the notification area (at the far right of the taskbar) or Windows desktop.2. Select the Presentation tab.

3–16 Hardware and Software GuidePointing Devices and KeyboardDRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm3. Select an option from the drop-down list box, or select Power Options to open the Microsoft Power Options control panel to view or change the current power scheme.4. To save your preferences and close the display, select OK.Showing the Welcome ScreenYou can choose to show the Quick Launch Buttons Properties dialog box each time you press the Presentation mode button. By default, this option is turned off. To turn it on select the check box next to Show Welcome Screen when Presentation mode button is pressed.Switching to an External DisplayBy default, the Automatically switch to external display setting in the Presentation tab is not selected. When you press the Presentation mode button, the application, folder, file, or Web site you selected in the Program to Start setting opens.If you select the Automatically switch to external display setting and press the Presentation mode button, the display is switched to the external display connected to your tablet PC and the application, folder, file, or Web site you selected in the Program to Start setting opens.✎You can toggle between displays by pressing the Presentation mode button.

Pointing Devices and KeyboardHardware and Software Guide 3–17DRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmSetting Advanced PreferencesYou can set the icon and ambient light sensor in the Quick Launch Button control panel.Displaying the Quick Launch Buttons IconTo show or hide the Quick Launch Buttons Properties icon in the notification area (at the far right of the taskbar) or your Windows desktop:1. Open the Quick Launch Buttons control panel:❏Select Start > Control Panel > Printers and Other Hardware > Quick Launch Buttons.- or -❏Select the Quick Launch Buttons icon in the notification area (at the far right of the taskbar) or Windows desktop.2. Select the Advanced tab. On the Advanced tab you can❏Display or hide the Quick Launch Buttons icon in the notification area (at the far right of the taskbar), or on the desktop.◆To display the icon, select the Show icon on the taskbar or Show icon on the desktop check box.◆To hide the icon, clear the Show icon on the taskbaror Show icon on the desktop check box.3. To save your preferences and close the display, select OK.

3–18 Hardware and Software GuidePointing Devices and KeyboardDRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmSetting the Ambient Light SensorThe tablet PC features a built-in light sensor that enables the tablet PC to automatically adjust the screen brightness according to the ambient lighting level. When the lighting of your environment changes, the ambient light sensor detects the change and automatically adjusts the screen brightness.You can turn the ambient light sensor on and off in 3 ways:■By pressing fn+f11■Through the Quick Launch Buttons control panel■By the Quick Launch Buttons control panel icon in the notification area (at the far right of the taskbar) or Windows desktop.✎To turn on and off the ambient light sensor using the Quick Launch Buttons control panel or the Quick Launch icon, the Quick Launch Buttons software must be installed.To turn the ambient light sensor on and off using the ambient light sensor hotkeys, press fn+f11.

Pointing Devices and KeyboardHardware and Software Guide 3–19DRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmYou can turn on and off the ambient light sensor using the Quick Launch Buttons software:1. Open the Quick Launch Buttons software:❏Select Start > Control Panel > Quick Launch Buttons.-or-❏Select the Quick Launch Buttons icon in the notification area (at the far right of the taskbar) or Windows desktop.2. Select the Advanced tab.3. Select or clear the Enable Ambient Light Sensor check box.4. Select Apply, and then select OK.You can turn on and off the ambient light sensor using the QuickLaunch Buttons icon:1. Right-click the Quick Launch Buttons icon in the notification area (at the far right of the taskbar) or Windows desktop.2. Select Turn Ambient Light Sensor On or Turn Ambient Light Sensor Off.

3–20 Hardware and Software GuidePointing Devices and KeyboardDRAFT Revised: 8/24/04File: Chap3.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm

Hardware and Software Guide 4–1DRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm4Pen and Command ControlsYou can enter and access information on the tablet PC by voice (supported in English only), pen, and command controls. This chapter provides information about using the pen and command controls.PenYou can write with the pen in pen-specific applications such as the Tablet PC Input Panel, in all Microsoft Office applications, and in most other Windows applications and utilities. The information you write on the screen with the pen can be filed, searched, and shared among most Windows applications.■To access basic information about using the pen within the operating system, refer to the printed Windows XP Tablet PC Edition Start Here guide included with the tablet PC.■To access on-screen tutorials which include more detailed information about using the pen in the tablet PC system:1. Open Windows Explorer. To open Windows Explorer from the Start button, select Start > All Programs > Accessories > Windows Explorer.2. In Windows Explorer, select My Computer > Local Disk (C:) > WINDOWS > Help > latute.hta.

4–2 Hardware and Software GuidePen and Command ControlsDRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmEntering Information with the PenIdentifying the Pen Tip and Pen ButtonThe pen interacts with the tablet PC whenever the tip of the pen 1 is within 1.27 cm (0.5 inch) from the screen. The pen button 2 emulates the functions of the right-click button on an external mouse.Holding the PenHold the pen as if you were writing with a standard pen or pencil. Position your hand on the pen so that you will not accidentally press the pen button.As you monitor the movements of the pen, focus on the pointer, not on the tip of the pen.

Pen and Command ControlsHardware and Software Guide 4–3DRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmPerforming Mouse Clicks with the PenTo select an item on the screen as you would with the left button of an external mouse:»Tap the item with the tip of the pen.To double-click an item on the screen as you would with the left button of an external mouse:»Tap the item twice with the tip of the pen.To select an item as you would with the right button of an external mouse:»Press and hold down the pen button, then tap the item with the tip of the pen.Performing Other Procedures with the PenIn addition to emulating mouse clicks, the pen can be used for the following tasks:■To display the pointer location, hold the pen tip immediately over any location on the tablet PC screen without touching the screen with the pen tip.■To display the menu options related to an item on the screen, tap the screen with the pen tip.■To write with the pen, write on the screen with the tip of the pen.■To press a pen-activated button, tap the button with the tip of the pen.Pressure-SensitivityThe tablet PC pen is equipped with a pressure-sensitive feature. This means that you can manipulate the pen to create lines of various thickness, depending upon the amount of pressure you use to write.

4–4 Hardware and Software GuidePen and Command ControlsDRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmCalibrating the PenThe pen can function at the default calibration or at a calibration set by another user. However, HP highly recommends that you use the pen only while it is calibrated to your personal handwriting and mouse action motions. Calibration optimizes pen performance for all users and particularly for left-handed users.To calibrate the pen:1. Select Start > Control Panel > Printers and Other Hardware > Tablet and Pen Settings > Settings tab.2. Select Calibrate.3. Follow the instructions on the screen.❏Tap the pen in the exact center of each of the calibration markers. The calibration markers are displayed on the screen as plus signs (+).❏Be sure to calibrate the pen for use in both portrait and landscape orientations.✎You can display information about any setting in the Tablet and Pen Settings window by selecting the question mark button in the upper right corner of the window, then selecting a setting. A definition, explanation, or procedure is displayed.

Pen and Command ControlsHardware and Software Guide 4–5DRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing the Pen HolderTo protect the pen when you are not using it, insert the pen, tip first, into the pen holder on the tablet PC.Setting Pen PreferencesPen preferences are set in the Tablet and Pen Settings window of the operating system. The preferences include settings that optimize handwriting recognition and the location of on-screen menus for either right-handed or left-handed users. To access the pen settings:»Select Start > Control Panel > Printers and Other Hardware icon > Tablet and Pen Settings window > Pen Options tab.The preferences you set in the Tablet and Pen Settings window are specific to the pen and the tablet PC.Pointing device preferences, such as pointer speed, click speed, and mouse trails, that apply to any pointing device in the system, are set in the Mouse Properties window. For instructions, refer to Chapter 3, “Pointing Devices and Keyboard.”

4–6 Hardware and Software GuidePen and Command ControlsDRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmCommand ControlsThe 5 command controls enable you to enter commands usually entered with keyboard keys while you are using the tablet PC without an external keyboard. The command controls can also be used while you are using the on-screen keyboard or an optional keyboard.Identifying Command ControlsComponent Description1Tablet PC Input Panel launch button2Q Menu button3Rotate button4Windows Security button5Jog dial

Pen and Command ControlsHardware and Software Guide 4–7DRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmCommand Controls Quick ReferenceThe following table identifies the default setting and activation procedure for each command control.■To activate a pen-activated button, tap the button with the tip of the pen.■To activate a manually activated button, press and release the button.Button Default Function ActivationTabl e t P C Input Panel launch button*Opens and closes the Tablet PC Input Panel application, which includes a writing pad and the on-screen keyboard.PenRotate button* Switches the image between landscape and portrait orientation.PenQ menu button*Opens and closes the Q Menu. PenWindows Security button*In Windows, functions like thectrl+alt+delete command on a standard keyboard.In the Setup utility, functions like the reset button on some computers.ManualJog dial* Enters commands or scrolls the image upward or downward.Manual*These controls are programmable. For instructions, refer to “SettingCommand Control Preferences,” later in this chapter.

4–8 Hardware and Software GuidePen and Command ControlsDRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing Command ControlsTablet PC Input Panel Launch ButtonTap the Tablet PC Input Panel launch button with the pen tip when the tablet PC is in Windows to open the Tablet PC Input Panel application. The Tablet PC Input Panel application displays a keyboard on the screen and can also display a writing pad, which supports handwriting.To enter the ctrl+alt+delete command, press the Windows Security button on the tablet PC with the pen tip or a small object like the end of a paper clip.Rotate ButtonTap the rotate button with the pen tip when the tablet PC is in Windows to rotate the image on the screen 90 degrees. For example, if the image is in landscape orientation, tap the rotate button to rotate the image to portrait orientation.Q Menu ButtonPress the Q menu button manually when Windows is running to open or close the Q Menu. The Q Menu provides quick access to programmable tasks and destinations including:■System controls, such as volume and screen brightness.■Key simulations such as Capture Screen, which functions like the print screen key on a standard keyboard.■Applications, files, or folders on a drive, a network, or the Internet.To select an item from the Q Menu without using the pen or a keyboard, press the Q menu button to display the Q Menu, rotate the jog dial upward or downward until your selection is highlighted, then press the jog dial inward. For more information about using the Q Menu, refer to Chapter 7, “Q Menu Software.”

Pen and Command ControlsHardware and Software Guide 4–9DRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmWindows Security ButtonPress the Windows Security button with the pen tip or a small object like the end of a paper clip to enter the ctrl+alt+delete command while you are in Windows or the reset command while you are in the Setup utility. Ctrl+Alt+Delete CommandWhen the tablet PC is in Windows, the Windows Security button clears your work from the screen and displays the Windows Security window in which you can lock, log off, or shut down the tablet PC, initiate Standby or Hibernation, or open Task Manager.■The Shut Down option in the ctrl+alt+delete window enables you to safely shut down the tablet PC if the system has become unresponsive.■Task Manager displays the status of all open applications and enables you to close an application that has become unresponsive.If the system remains unresponsive after selecting Shut Down in the Windows Security window, slide and hold the power switch for 4 seconds. For additional shut down procedures, refer to Chapter 2, “Power.” For information about using the ctrl+alt+delete command in non-Windows applications, refer to the application documentation.Reset CommandWhen the Setup utility is open, the Windows Security button simulates the reset button found on some computers. When the tablet PC is reset, the tablet PC restarts and all unsaved information is lost.The reset function can be used to restore functionality when the system has become unresponsive. For information about the Setup utility, which is a non-Windows utility, refer to Chapter 11, “Computer Setup.”

4–10 Hardware and Software GuidePen and Command ControlsDRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmJog DialPress or rotate the jog dial manually to enter commands or scroll vertically:■Press inward to simulate the function of the enter key on a standard keyboard.■Rotate upward or downward to scroll toward the top or bottom of an image.At the default setting, the jog dial scrolls line by line like the up and down arrow keys on a standard keyboard. The jog dial can be set to scroll page by page like the page up and page down keys on a standard keyboard or three lines at a time like a mouse wheel. Other settings, in addition to scroll functions, are also available. For instructions, refer to “Setting Command Control Preferences,” next in this chapter.

Pen and Command ControlsHardware and Software Guide 4–11DRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmSetting Command Control PreferencesAll command controls except the Display Toggle button and the enter function of the jog dial can be customized to launch applications, simulate key combinations, or perform preset system functions.Each programmable command control can be assigned to 4 settings. Each setting applies only to 1 of 4 views:■Portrait-Primary■Portrait-Secondary■Landscape-Primary■Landscape-SecondaryCommand control preferences are set in the Tablet and Pen Settings window. You must select a view before setting a preference. Each view is illustrated in the Button Location pane of the Tablet and Pen Settings window as you select it.If you are unfamiliar with the four views, you may want to read “Selecting a View” next in this section, before setting a command control preference. Selecting a ViewIn the Portrait-Primary and Portrait-Secondary views, the image is displayed vertically, in portrait orientation. In the Landscape- Primary and Landscape-Secondary views, the image is displayed horizontally, in landscape orientation.■A portrait view is often optimal when you are using the tablet PC as a handheld. ■A landscape view is often optimal when you are displaying the image on an optional external monitor or projector.

4–12 Hardware and Software GuidePen and Command ControlsDRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmIn the primary views (Portrait-Primary and Landscape-Primary), the image switches clockwise between vertical and horizontal. In the secondary views (Portrait-Secondary and Landscape- Secondary), the image switches counterclockwise between vertical and horizontal.■Left-handed users may find the secondary views more convenient.■HP recommends that you not use a secondary view while using the internal wireless. The positions commonly occupied by the tablet PC, external devices, and users while the tablet PC is in a secondary view may obstruct the antennas.When you are facing the tablet PC screen with the tablet PC in portrait orientation, the antennas, not visible from the outside of the tablet PC, are on the right and left sides of the tablet PC, near the upper corners.To switch the system among the Portrait-Primary, Landscape- Primary, Portrait-Secondary, and Landscape-Secondary views:1. Press the Q menu button.2. Select a view from the Q Menu. (The system switches to the view you select.)For more information about using the Q Menu, including instructions for adding or removing items from the Q Menu, refer to Chapter 7, “Q Menu Software.”

Pen and Command ControlsHardware and Software Guide 4–13DRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmAssigning or Changing a PreferenceTo assign or change the function of a programmable command control:1. Select Start > Control Panel > Printers and Other Hardware > Tablet and Pen Settings > Tablet Buttons tab.2. In the Button Settings For field, select the view in which you want to use your preference. (The view is illustrated in the Button Location panel.)3. In the Tablet Button drop-down list, select the button you plan to assign.❏To assign or change the function of rotating the jog dial upward, select Up.❏To assign or change the function of rotating the jog dial downward, select Down.4. Select Change. (The Button Action dialog box opens.)5. Select your preference in the Button Action dialog box. To save your preference, select OK or Apply.Returning All Command Controls to Default SettingsTo return the settings on all command controls to their default settings:1. Select Start > Control Panel > Printers and Other Hardware > Tablet and Pen Settings > Tablet Buttons tab.2. In the Button Settings For field, select the view in which you want to change all command controls to their default settings.3. Select Reset. (All command controls are returned to their default settings only in the orientation currently selected.)4. Select Apply, and then select OK.

4–14 Hardware and Software GuidePen and Command ControlsDRAFT Revised: 8/24/04File: Chap4.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmOn-Screen KeyboardThe Tablet PC Input Panel application displays a keyboard on the screen. This on-screen keyboard simulates the functions of an optional keyboard.To open the Tablet PC Input Panel application, tap the Tablet PC Input Panel launch button 1 with the pen.■To type, tap a key.■To switch the keys displayed in the top row between number keys and function keys, tap Func.■To enter the ctrl+alt+delete command, press the Windows Security button 2 on the tablet PC with the pen tip or a small object like the end of a paper clip. To protect your work and the system, the ctrl+alt+delete command cannot be entered using the Ctrl, Alt, and Del keys on the on-screen keyboard.For more information about using the Tablet PC Input Panel application, refer to the“Tablet PC Input Panel Launch Button”section earlier in this chapter.

Hardware and Software Guide 5–1DRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pm5MultimediaUsing Audio FeaturesThe following figure and table describe the audio features of the tablet PC.Component Description1Volume mute button Turns off tablet PC sound.2Volume down button Decreases tablet PC sound.3Volume up button Increases tablet PC sound.4Internal microphone Records sound.

5–2 Hardware and Software GuideMultimediaDRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pmUsing the Audio-In (Microphone) JackThe tablet PC is equipped with a stereo microphone jack. When connecting a microphone to the microphone jack, use a microphone with a 3.5-mm plug.■If you connect a stereo (dual-channel) microphone, stereo sound will be recorded.■If you connect a monaural (single-channel) microphone, left-channel sound will record on both channels.■If you connect a dynamic microphone, the recommended sensitivity may not be achieved.✎When an external microphone is connected to the tablet PC, the tablet PC internal microphone is disabled.Using the Audio-Out (Headphone) JackÅWARNING: To reduce the risk of personal injury, adjust the volume before putting on headphones or a headset.ÄCAUTION: To prevent possible damage to an external device, do not plug a single sound channel (monaural) connector into the headphone jack.5Audio-out (headphone) jack Produces system sound when connected to optional powered stereo speakers, headphones, headset, or television audio.6Audio-in (microphone) jack Connects an optional monaural or stereo microphone.7Speaker Produces tablet PC sound.Component Description

MultimediaHardware and Software Guide 5–3DRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pmThe stereo (dual-channel) headphone jack is used to connect headphones, and also to connect the audio function of an audio/video device such as a television or VCR.When connecting a device to the headphone jack:■Use only a 3.5-mm stereo plug.■For best sound quality, use 24-ohm to 32-ohm headphones.■The internal speaker is disabled.Adjusting the VolumeTo adjust the volume, use any of the following controls:■Tablet PC volume buttons❏To mute or restore volume, press the volume mute button. You can also mute or restore volume by pressing the volume down and volume up buttons simultaneously.❏To decrease the volume, press the volume down button.❏To increase the volume, press the volume up button.

5–4 Hardware and Software GuideMultimediaDRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pm■Windows volume control:1. Click the Volu m e icon in the notification area (at the far right of the taskbar).2. Increase or decrease the volume by moving the slider up or down. (You can also select the check box next to Mute to mute the volume.)- or - 1. Double-click the Volu me icon.2. In the Volume Control column, increase or decrease the volume by moving the Volume slider up or down. You can also adjust the balance or mute the volume.✎Volume can also be adjusted within some applications.If the Volume icon is not in the notification area, follow the steps below to place it in the notification area.1. Select Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio Devices.2. Select the Volu me tab.3. Select the check box for Place volume icon in the taskbar.4. Select Apply.Using Video FeaturesThe tablet PC features a 7-pin, dual-purpose S-Video out jack that connects the tablet PC to an optional S-Video device, such as a television, VCR, camcorder, overhead projector, or video capture card, using an optional, standard (4-pin) S-Video cable. The S-Video out jack features 3 extra pins that enable an optional S-Video– to–composite adapter to be used with the tablet PC.

MultimediaHardware and Software Guide 5–5DRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pmThe tablet PC can support one S-Video device connected to the S-Video out jack while simultaneously supporting an image on the tablet PC display and on any other supported external display. The S-Video connection usually provides an image of higher quality than a composite-video connection provides.To transmit video signals through the S-Video out jack, you need an S-Video cable, available from most electronics retailers. If you are combining audio and video functions, such as playing a movie from a DVD in an optional MultiBay drive to a television, you also need a standard audio cable, available from most electronics retailers.Using the S-Video Out JackTo connect a video device to the S-Video out jack:1. Plug either end of the S-Video cable into the S-Video out jack on the tablet PC.

5–6 Hardware and Software GuideMultimediaDRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pm2. Connect the other end of the cable to the video device, as instructed in the documentation included with the device.✎If the S-Video out jack on the tablet PC is not accessible because the tablet PC is docked into an optional docking device, you can connect the device to the S-Video out jack on the docking device.Connecting a Monitor or ProjectorTo connect an external monitor or projector to the tablet PC, insert the monitor cable into the external monitor port on the back of the tablet PC.✎If a properly connected external monitor or projector does not display an image, try pressing the fn+f4 hotkey to switch the image to the monitor. You can toggle between displays by pressing the Presentation mode button.

MultimediaHardware and Software Guide 5–7DRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pmUsing CD and DVD SoftwareThe following software is supported for use with the tablet PC:■Windows Media Player—Plays audio CDs and video DVDs and copies audio and data CDs. This software is included with the Windows operating system.■InterVideo WinDVD—Plays video CDs and DVD movies. This software is preinstalled on select tablet PCs. You can also obtain this software by any of the following methods:❏Install WinDVD from the Driver Recovery disk provided with most HP tablet PCs.❏If you do not have the Driver Recovery disk, refer to the Worldwide Telephone Numbers booklet included with your tablet PC to contact Customer Care for a copy of the Restore solution for you tablet PC.❏Download the software from the HP Web site: http://www.hp.com■InterVideo WinDVD Creator Plus—Provides the ability to create, edit and burn movies to a DVD or video CD. This software is located on the InterVideo WinDVD Creator CD, included with select tablet PCs.■Sonic RecordNow!—Enables you to create copies of data and audio CDs and DVDs and create personalized audio CDs and DVDs. RecordNow! is preinstalled on select tablet PCs.Observing the Copyright WarningIt is a criminal offense, under applicable copyright laws, to make unauthorized copies of copyright-protected material, including computer programs, films, broadcasts, and sound recordings. This tablet PC should not be used for such purposes.

$5–8 Hardware and Software GuideMultimediaDRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pmInstalling SoftwareTo install software from a CD that is included with the tablet PC:1. Insert an appropriate optical drive into an external MultiBay or MultiBay II.2. Connect the tablet PC to a reliable AC outlet.3. Close any open applications.4. Insert a software CD into the optical drive.❏If Autorun is enabled, an installation wizard is displayed.❏If Autorun is disabled, select Start > Run. Enter:x:\setup.exe(where x is your CD drive designation), and then select OK.5. When the installation wizard is displayed, follow the installation instructions on the screen.6. Restart the tablet PC if prompted.✎Repeat the installation procedure for all software you want to install.✎WinDVD Creator has special drive requirements for proper installation. To install WinDVD Creator, refer to the instructions provided with the InterVideo WinDVD Creator CD.$

$MultimediaHardware and Software Guide 5–9DRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pmEnabling AutoPlayAutoPlay is an option in Windows that turns the Autorun feature on or off. Autorun starts a program or plays a title on a disc as soon as the disk is inserted into the drive and the drive door is closed. By default, AutoPlay is enabled on the tablet PC.To disable AutoPlay or to enable AutoPlay if the feature has been turned off, refer to your operating system documentation or visit the Microsoft Web site at: http://www.microsoft.com.Installing the Universal Disc Format ReaderSome CDs or DVDs created with “drag-and-drop” software might not initially run in the tablet PC you are using. The first time you insert a CD or DVD formatted for drag-and-drop software into the optical drive, you might be prompted to install the Universal Disk Format (UDF) Reader. Discs formatted for drag-and-drop software or created using drag-and-drop software contain a copy of the UDF Reader.To install the UDF Reader:1. Insert the CD or DVD created with the drag-and-drop software into the optical drive of the tablet PC.2. Select Start > Run. Enter:x:\udfinst.exe(where x is the CD or DVD drive designation).3. Select OK.4. Follow the installation instructions on the screen.$

5–10 Hardware and Software GuideMultimediaDRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pmUsing Windows Media PlayerWindows Media Player is included with the Windows operating system. It can be used to play CDs and DVDs and create audio and data CDs. To play a CD or DVD:1. Insert the CD or DVD into the optical drive, and then close the tray. 2. Wait several seconds, and then:❏If AutoPlay is enabled, Windows Media Player is opened.❏If Windows Media Player is not opened, select Start > (All) Programs > Accessories > Entertainment > Windows Media Player, and then select the Play button to play the disc.For additional instructions on using this application, select Helpon the Windows Media Player menu bar.Using WinDVD PlayerInterVideo WinDVD can be used to play video CDs and DVD movies. To locate and install InterVideo WinDVD, refer to the “Installing Software” section in this chapter.To open WinDVD when AutoPlay has been disabled, select Start> (All) Programs > InterVideo WinDVD > InterVideo WinDVD.For more information about using WinDVD, select Help on the WinDVD menu bar.Using WinDVD Creator Plus (Select Models Only)WinDVD Creator Plus can be used to create, edit, and burn movies to a DVD or video CD. This software must be installed from the InterVideo WinDVD Creator CD provided with select tablet PCs.

MultimediaHardware and Software Guide 5–11DRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pmWinDVD Creator Plus must be installed using a DVD/CD-RW or DVD+RW/R and CD-RW Combo Drive only. If you do not use one of the these drives, WinDVD Creator Plus will not be installed.For more information about WinDVD Creator Plus capabilities and instructions on creating DVDs and Video CDs, refer to the WinDVD Creator Plus online help after installing the software.Using Sonic RecordNow!Sonic RecordNow! can be used to create backups of data or audio CDs or DVDs, transfer audio files from CDs to a hard drive, and create personalized audio CDs. RecordNow! is preinstalled on your tablet PC. For more information about RecordNow! capabilities and for instructions on creating data and audio CDs and DVDs, refer to the Sonic RecordNow! Tutorial and online help.Changing DVD Region SettingsÄCAUTION: The region settings on your DVD drive can only be changed 5times.■The region setting you select the fifth time becomes the permanent region setting on the DVD drive.■The number of allowable region changes remaining on the drive is displayed in the Remaining Times Until Permanent field in the WinDVD window. The number in the field includes the fifth and permanent change.Most DVDs that contain copyrighted files also contain region codes. The region codes help protect copyrights internationally.You can play a DVD containing a region code only if the region code on the DVD matches the region setting on your DVD drive.If the region code on a DVD does not match the region setting on your drive, a Playback Of Content From This Region Is Not Permitted message is displayed when you insert the DVD. To

5–12 Hardware and Software GuideMultimediaDRAFT Revised: 8/10/04File: Chap5.fm PN: HP-367186-001 hp CONFIDENTIALAugust 10, 2004 12:25 pmplay the DVD, you must change the region setting on your DVD drive. DVD region settings can be changed through the operating system or through some DVD players.Changing Settings Using the Operating SystemTo change settings through the operating system:1. Open Device Manager by selecting Start > My Computer.Right-click in the window and select Properties > Hardwaretab > Device Manager.2. Select DVD/CD-ROM drives, right-click the DVD drive for which you want to change region settings, and then select Properties.3. Make the desired changes on the DVD Region tab.4. Select OK.5. For additional information, refer to the Windows operating system Help and Support.Changing Settings Using WinDVDTo change the region settings on a drive using WinDVD:1. Open WinDVD through one of the following methods:❏Select the WinDVD Player icon on the taskbar.❏Select Start > (All) Programs > InterVideo WinDVD > InterVideo WinDVD.2. Right-click the WinDVD player window.3. Select Setup.4. Select the button for the region, and then select your region.5. Select OK.Changing Settings Using Other DVD SoftwareTo change region settings on a drive using a DVD player other then WinDVD, refer to the documentation provided with the player.

Hardware and Software Guide 6–1DRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm6WirelessIf your notebook is equipped with an integrated wireless device such as 802.11 or Bluetooth wireless devices, you have a wireless notebook.■An 802.11 wireless notebook can connect to wireless networks in corporate offices, your home, and public places. Wireless networks include wireless local area networks (WLANs) or “hotspots.” Hotspots are wireless access points available in public places, such as airports, restaurants, coffee shops, hotels, and universities.■A Bluetooth wireless notebook can connect to other Bluetooth wireless-enabled devices using a wireless personal area network (PAN).

6–2 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmYour notebook has a button that may be used to enable and disable the 802.11 and Bluetooth wireless devices and an associated light to indicate the state of the wireless devices. The following illustration shows the wireless button 1 and light 2.In addition to the wireless button and light, your notebook has software controls that enable you to turn on, turn off, enable, and disable your wireless devices. The following table explains the software controls.WirelessControl DescriptionWirelessAssistantIs a software utility that enables you to turn on and off the 802.11 and Bluetooth wireless devices individually. For more information on using Wireless Assistant, refer to the “Turning On, Turning Off, Enabling and Disabling the 802.11 Wireless and Bluetooth Devices” section in this chapter.ComputerSetup controlsEnable and disable the 802.11 and Bluetooth wireless devices in Computer Setup. For more information about using Computer Setup to control the 802.11 and Bluetooth wireless devices, refer to Chapter 9, “Computer Setup.”

WirelessHardware and Software Guide 6–3DRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmWireless Local Area Network (Select Models Only)With the 802.11 wireless device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories linked by a wireless router or a wireless access point.■A large scale WLAN, such as a corporate WLAN or public WLAN hotspot, typically use wireless access points, that can handle a large number of computers and accessories and can separate critical network functions. ■A home or small office WLAN typically uses a wireless router, which enables several wireless and wired computers to share an Internet connection, a printer, and files without additional pieces of hardware or software. Wireless access point and wireless router are often used interchangeably. Notebooks with 802.11 WLAN devices may support one or more of three IEEE physical layer standards: ■802.11a■802.11b■802.11gThere are three popular implementations of WLAN adapters:■802.11b only■802.11b/g■802.11a/b/g802.11b, the first popular WLAN standard, supports data rates of up to 11 Mbps and operates at a frequency of 2.4 GHz. 802.11g, which came later, also operates at 2.4 GHz but supports data rates of up to 54 Mbps. An 802.11g WLAN device is backward compatible with 802.11b devices, so they can operate on the same network. 802.11a supports data rates of up to 54 Mbps but operates at a frequency of 5 GHz. 802.11a is not compatible with

6–4 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm802.11b and 802.11g. For information on identifying the type of device in your notebook, refer to the “Identifying a WLAN Device” section in this chapter.Connecting Your Wireless Notebook to a Corporate WLANContact your network administrator or IT department for information on connecting your notebook to your corporate WLAN.Connecting Your Wireless Notebook to a Public WLANContact your ISP or search the Web for a list of public WLANs near you. Web sites that list public WLANs include Cisco Hotspot Locator, Hotspotlist, and Geektools.When you are within range of a public WLAN, a Wireless Network Connection interactive message is displayed at the bottom of the screen. Check with each public WLAN location for cost and connection requirements.

WirelessHardware and Software Guide 6–5DRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmSetting Up a WLAN in Your HomeTo set up a WLAN and connect to the Internet in your home, you need the following equipment. The illustration below shows an example of a completed wireless network installation that is connected to the Internet. This wireless network includes■An optional broadband modem (either DSL or cable) and high-speed Internet service purchased from an Internet service provider (ISP) 1.■An optional wireless router (purchased separately) 2.■Your wireless notebook 3.As this network grows, additional wireless and wired computers can be connected to the network to access the Internet.✎If you need technical assistance to install your WLAN, contact the router manufacturer or your ISP.

6–6 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing a WLAN ConnectionTo use a WLAN connection:■Verify that all drivers required by the 802.11 wireless device are installed and that the 802.11 wireless device is correctly configured. ✎If you are using an integrated 802.11 wireless device, all required drivers are installed and the adapter is preconfigured and ready for use.■If you are using an integrated 802.11 wireless device, verify that the 802.11 wireless device is turned on. When the 802.11 wireless device is turned on, the wireless light is turned on. If the wireless light is off, turn on the 802.11 wireless device. Refer to the “Turning On, Turning Off, Enabling and Disabling the 802.11 Wireless and Bluetooth Devices”section.■For your home WLAN, verify that your router is correctly configured. For instructions, refer to your router documentation.✎Functional range for subsequent WLAN connections vary, depending on your notebook WLAN implementation, router manufacturer, and interference from varying types of walls and other electronic devices.For more information about using a WLAN connection:■Refer to information from your ISP and the documentation included with your wireless router and other WLAN equipment.■Access the information and Web site links provided at Start > Help and Support.■Refer to the documentation included with your notebook. The Troubleshooting guide on the Notebook Documentation CDcontains a section about wireless LAN device problems and resolutions.

WirelessHardware and Software Guide 6–7DRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmUsing Wireless Security FeaturesWhen you set up your own WLAN or access an existing WLAN, always ensure that security features are protecting the WLAN. If you do not enable security on your WLAN, an unauthorized wireless user can access your notebook data and use your Internet connection without your knowledge.The most common security levels are Wi-Fi Protected Access (WPA)-Personal and Wired Equivalent Privacy (WEP). In addition to enabling WPA-Personal or WEP security encryption on the router, you may want to use one or more of the following security measures:■Change the default network name (SSID) and password.■Use a firewall.■Set security on your Web browser.■Enable MAC address filtering on the router.For more information about WLAN security, refer to the HP Web site at http://www.hp.com/go/wireless for details.Installing Wireless Software (Optional)Microsoft Windows XP supports WLAN configuration with the Zero Client Configuration feature. HP provides a separate WLAN configuration utility that must be installed if you plan to use Cisco Compatible Extensions. Cisco Compatible Extensions enable wireless devices to use Cicso-based WLANs.

6–8 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmIdentifying a WLAN DeviceTo install HP WLAN software for an integrated 802.11 wireless device, you need to know the name of the integrated 802.11 wireless device on your notebook. To identify an integrated 802.11 wireless device:1. Display the names of all the 802.11 wireless devices on your notebook:a. Select Start > My Computer.b. Right-click in the My Computer window.c. Select Properties > Hardware tab > Device Manager > Network Adapters.2. Identify the 802.11 wireless device from the list that is displayed:❏The listing for an 802.11 wireless device includes the term wireless LAN, WLAN, or 802.11.❏If no 802.11 wireless device is listed, either your notebook does not have an integrated 802.11 wireless device, or the driver for the 802.11 wireless device is not properly installed.Accessing WLAN Software and DocumentationYour WLAN software is preloaded on your notebook and is available in the Software Setup utility. To install the WLAN software:»Select Start > All Programs > Software Setup, and then follow the instructions on the screen. (When you are prompted to select the software you want to install, select or clear the corresponding check boxes.)

WirelessHardware and Software Guide 6–9DRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmThe WLAN software is also available as a SoftPaq at the HP Web site. To access, download, and install the SoftPaq, use either of the following procedures:■Select Start > Help and Support.-or-■Visit the HP Web site at http://www.hp.com/support:a. Choose your language and region.b. Select the Download Drivers and Software radio buttonc. Enter your computer model information, and then follow the instructions provided at the Web site. ✎WLAN software is provided in the Network category. To access model information about your computer, refer to the serial number label. The serial number label is on the bottom of the notebook.To access documentation for your WLAN software:1. Install the WLAN software as instructed earlier in this chapter.2. Open the utility.3. Select Help on the menu bar.Troubleshooting 802.11 Wireless DevicesFor more troubleshooting information, visit the HP Web site (http://www.hp.com/go/wireless) or refer to the documentation included with your notebook. The Troubleshooting guide on the Notebook Documentation CD contains a section about wireless LAN device problems and resolutions.

WirelessHardware and Software Guide 6–11DRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm■Bluetooth serial port—Transfers data over the Bluetooth link using a virtual COM port.■Hands-Free—Enables a vehicle-embedded, hands-free unit or a notebook serving as a hands-free unit to establish a wireless connection to a cellular phone and to act as the Bluetooth cellular phone audio input and output mechanism.■Basic imaging—Provides a wireless connection between a Bluetooth-enabled camera and other Bluetooth devices. The camera can be controlled remotely by a notebook, and images can be transferred from a camera to be stored on a computer or to be printed.■Human interface device—Provides a wireless connection to other Bluetooth devices, such as keyboards, pointing devices, gaming devices, and remote monitoring devices.■Fax—Provides a Bluetooth connection that enables a notebook to send or receive a fax message using a Bluetooth cellular phone or modem.■Headset—Provides a wireless connection between a headset and a notebook or cellular phone. The headset acts as the device’s audio input and output mechanism and increases mobility.For more information about using Bluetooth with your notebook, refer to the Wireless Documentation CD included with your notebook.

6–12 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmTurning On, Turning Off, Enabling and Disabling the 802.11 Wireless and Bluetooth DevicesThe wireless button 1 enables and disables 802.11 wireless and Bluetooth devices in conjunction with Wireless Assistant. By default, the 802.11 wireless and Bluetooth devices and wireless light 2 are turned on when you turn on the notebook.✎Turning on a wireless device does not automatically create a WLAN or connect you to a WLAN. For information on setting up a WLAN refer to the “Wireless Local Area Network (Select Models Only)” section in this chapter.The 802.11 wireless and Bluetooth devices have two power states:■Enabled■Disabled

WirelessHardware and Software Guide 6–13DRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmYou can enable and disable the wireless devices in Computer Setup. For more information about using Computer Setup to control the 802.11 and Bluetooth wireless devices, refer to Chapter 9, “Computer Setup.” You can also enable and disable the wireless devices with the wireless button.When the wireless devices are enabled in Computer Setup and with the wireless button, you can use Wireless Assistant to turn on and off the devices individually.To view the state of your wireless devices, place the cursor over the Wireless Assistant icon in the notification area, or open Wireless Assistant by double-clicking the icon in the notification area. Wireless Assistant displays the status of the devices as on, off, or disabled. Wireless Assistant also displays the status of the devices in Computer Setup as enabled or disabled.For more information about Wireless Assistant:1. Open Wireless Assistant by double-clicking the icon in the notification area.2. Select the Help button.✎You cannot use the wireless button or Wireless Assistant to control the wireless devices if they are disabled in Computer Setup.

6–14 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pmTurning On the 802.11 Wireless and Bluetooth DevicesIf And Then■Wireless Assistant shows that both WLAN and Bluetooth are off■Wireless light is offYou want to turn on either or both devices1. Right-click the WirelessAssistant icon in the notification area.2. Select the device or devices you want to turn on.✎If the wireless devices are turned off, pressing the wireless button disables both devices. The button does not turn on the devices.■Wireless Assistant shows that both WLAN and Bluetooth are disabled*■Wireless light is offYou want to turn on either or both devices1. Press the wireless button. (The devices return to their previous on or off state.)2. If the wireless devices are turned off, right-click the Wireless Assistant icon in the notification area.3. Select the device or devices you want to turn on.■Wireless Assistant shows that one device is on and the other device is off■Wireless light is onYou want to turn on either or both devices1. Right-click the WirelessAssistant icon in the notification area.2. Select the device or devices you want to turn on.*If the wireless devices are not both on when you disable the devices, pressing the wireless button again returns the devices to their previous on or off state. Pressing the button does not turn on both devices.

WirelessHardware and Software Guide 6–15DRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm✎If you want your wireless devices to be turned on when you turn on your notebook, you must turn them on before you shut down or restart.Turning Off and Disabling the 802.11 Wireless and Bluetooth DevicesIf And Then■WirelessAssistantshows that both WLAN and Bluetooth are on■Wireless light is onYou want to disable both devicesPress the wireless button.You want to turn off either or both devices1. Right-click the WirelessAssistant icon in the notification area.2. Select the device or devices you want to turn off.■WirelessAssistantshows that both WLAN and Bluetooth are off■Wireless light is offYou want to disable both devicesPress the wireless button.■WirelessAssistantshows that one device is on and the other device is off*■Wireless light is onYou want to disable both devicesPress the wireless button.You want to turn off both devices.1. Right-click the WirelessAssistant icon in the notification area.2. Select the device or devices you want to turn off.*If the wireless devices are not both on when you disable the devices, pressing the wireless button again returns the devices to their previous on or off state. Pressing the button does not turn on both devices.

6–16 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap6.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:01 pm

Hardware and Software Guide 7–1DRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm7Q Menu SoftwareQ MenuThe Q Menu provides quick access to many of the system tasks accessed with the buttons, keys, or hot keys found on most tablet PCs.You can program the Q Menu to access alternative system tasks or to any item on a drive, a network, or the Internet.Identifying Q Menu ControlsThe jog dial 1 and the Q Menu button 2 are used in Q Menu procedures.

7–2 Hardware and Software GuideQ Menu SoftwareDRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmDisplaying and Closing the Q MenuThe Q Menu can be displayed or closed at any time by using any of the following procedures:■To display the Q Menu, press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar). If the Q icon is not displayed in the notification area (at the far right of the taskbar):1. Press the Q Menu button.2. Select Q Menu Settings.3. Select the Display Q Menu Icon On System Traycheck box.

Q Menu SoftwareHardware and Software Guide 7–3DRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm4. Select OK.If the icon is not displayed, select Show Hidden Icons in the notification area (at the far right of the taskbar).■To close the Q Menu, press the Q Menu button or select anywhere outside of the Q Menu.For information about setting a pen-activated button to open and close the Q Menu, refer to Chapter 4, “Pen and Command Controls.”Selecting an Item from the Q MenuThe items on the Q Menu can be selected with the jog dial, the pen, an external mouse, or the pointing devices.To select an item with the jog dial, rotate the jog dial upward or downward to scroll vertically through the items, then press the jog dial inward to select an item.Obtaining Information About System-Defined ItemsTo display a description of a system-defined Q Menu item or to test any Q Menu item by executing the item command:1. Press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar).2. Select Q Menu Settings.3. On the Items to Display On Q Menu list:❏To display a description of a system-defined item, select the item. (A description is displayed in a panel beneath the list.) User-defined items are not described.❏To test any item by executing the item command, select the item, and then select Execute.Procedures for using all system-defined items are provided in the “Using a System-Defined Item” section, later in this chapter.

7–4 Hardware and Software GuideQ Menu SoftwareDRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmSetting Q Menu PreferencesThe Q Menu can display up to 40 items. Several system-defined items are displayed by default. Additional system-defined and user-defined items can be added. All items, including the default items, can be removed.The items on the Q Menu are managed from the Items to Display On Q Menu list.Accessing the Items to Display on Q Menu ListThe Items to Display on Q Menu list can be accessed at any time by using either of the following procedures:■Press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar), and then select Q Menu Settings.■Select Start > Control Panel > Other Control Panel Options > Q Menu Settings.Removing a Q Menu ItemTo remove an item from the Q Menu:1. Press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar).2. Select Q Menu Settings.3. On the Items to Display On Q Menu list, clear the check box for the item you want to remove.4. Select Apply > OK.

Q Menu SoftwareHardware and Software Guide 7–5DRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmAdding a Q Menu ItemAn item must be displayed on the Items to Display On Q Menu list before it can be added to the Q Menu.The Q Menu and the Items to Display on Q Menu list can include no more than 40 items. If the list currently contains 40 items, the Add button is dimmed and unavailable. If the Add button is unavailable, you must remove a listed item before you can add the new item.Adding a Listed Item to the Q MenuTo add an item from the Items to Display On Q Menu list to the Q Menu:1. Press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar).2. Select Q Menu Settings.3. Select the check box for the item you want to add.4. Select OK.To display the Q Menu after adding the item, press the Q Menubutton or select the Q icon in the notification area (at the far right of the taskbar).Adding an Unlisted Item to the Q MenuTo add an item that is not on the Items to Display on Q Menu list—for example, an item on a drive, network, or the Internet—to both the Items to Display on Q Menu list and to the Q Menu:1. Press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar).2. Select Q Menu Settings.3. Select Add.

7–6 Hardware and Software GuideQ Menu SoftwareDRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm4. In the Add New Menu Entry window, you can add the item by typing or by browsing:❏To add the item using the keyboard, type a name for the item in the Display Name field and type the path to the item in the File Name field. If you prefer to type the Display Name, but browse for the File Name, leave the File Name field blank.❏To add an item by browsing, select the Browse button next to the File Name field. ❏In the window, select the item. (The full name of the item is displayed in the File Name field and, if you did not type a name earlier in the Display Name field, a Display Name is generated from the item name and displayed in the Display Name field.)5. To confirm your preference(s), select Apply > OK. 6. To close the Q Menu window, select OK.To display the Q Menu after adding the item, press the Q Menubutton or select the Q icon in the notification area (at the far right of the taskbar).Changing a User-Defined ItemUser-defined items can be changed, but system-defined items cannot be changed. If you select a system-defined item on the Items To Display on Q Menu list, the Modify button is unavailable.To change the Display Name and/or File Name of a user-defined item:1. Press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar).2. Select Q Menu Settings.3. Select the item on the Items To Display On Q Menu list.

Q Menu SoftwareHardware and Software Guide 7–7DRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm4. Select Modify. ❏To change the Display Name or File Name of the item using the keyboard, type the new name for the item in the Display Name field or type the new path to the item in the File Name field. If you prefer to type the Display Name, but browse for the File Name, leave the File Name field blank.❏To change the Display Name or File Name by browsing, select the Browse button beside the File Name field. ❏In the window, select the item. (The full name of the item is displayed in the File Name field and, if you did not type a name earlier in the Display Name field, a Display Name is generated from the item name and displayed in the Display Name field.)5. To confirm your preference(s), select Apply > OK.6. To close the Q Menu window, select OK.To display the Q Menu after changing a Display and/or File Name, press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar).Repositioning a Q Menu ItemTo change the location of an item on the Q Menu:1. Press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar).2. Select Q Menu Settings.3. Select the item on the Items to Display On Q Menu list, then:❏To move the item upward, select the Move Up button.❏To move the item downward, select the Move Downbutton.4. To confirm your preference(s) and close the Q Menu window, select Apply > OK.

7–8 Hardware and Software GuideQ Menu SoftwareDRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmRemoving an Item from the Items to Display on Q Menu ListSystem-defined items cannot be removed from the Items to Display on Q Menu List. To remove a user-defined item:1. Press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar).2. Select Q Menu Settings.3. Select the item you want to remove.4. Select Remove.5. To confirm your preference(s) and close the Q Menu window, select Apply > OK.Enabling Automatic Mode ChangeEnabling automatic mode change allows the Q Menu software to adjust the display orientation automatically. If you disable this option, the orientation of the display will need to be manually changed.To enable automatic mode change:1. Press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar).2. Select Q Menu Settings.3. Select the Enable Automatic Mode Change check box.Allowing All Users to Configure Q MenuThis option allows all user accounts to reconfigure Q Menu. When selected, this change is only applied to that user.To enable automatic mode change:1. Press the Q Menu button or select the Q icon in the notification area (at the far right of the taskbar).2. Select Q Menu Settings.3. Select the Allow All Users to Configure Q Menu check box.

Q Menu SoftwareHardware and Software Guide 7–9DRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmUsing a System-Defined ItemAs shipped, the Q Menu displays only the items identified below as default. All the items described below can be added or removed from the Q Menu. For instructions, refer to “Setting Q Menu Preferences,” earlier in this chapter.Brightness (Default)Select Brightness to display a pop-up window that enables you to adjust screen brightness with the jog dial. After selecting your preferences, select OK in the pop-up window.Volume (Default)Select Volu me to display the operating system volume control window.Mute On/Off (Default)If system volume is on, select Mute On/Off to mute system volume. If system volume is muted, select Mute On/Off to restore system volume.Capture ScreenSelect Capture Screen to copy the image currently displayed on the tablet PC screen to the Windows clipboard.To save or print the image, open an application which supports a screen image, such as Microsoft Word or Microsoft Paint, then paste the image.For example, to copy the screen image into a Word document:1. Select Capture Screen.2. Open Word.3. Place the pointer in the document where you want to paste the image.4. On the Word menu bar, select Edit > Paste.

7–10 Hardware and Software GuideQ Menu SoftwareDRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmCapture WindowSelect Capture Window to copy the image of the currently active window on the tablet PC screen to the Windows clipboard.To save or print the image, open an application which supports a screen image, such as Microsoft Word or Microsoft Paint, then paste the image.For example, to copy the an image of the currently active window into a Word document:1. Select Capture Window.2. Open Word.3. Place the pointer in the document where you want to paste the image.4. On the Word menu bar, select Edit > Paste.Tablet Display (Default)When an optional display device, such as an external monitor or projector, is connected to the external monitor connector on the tablet PC:To display the image only on the tablet PC:»Select Tablet Display.✎Selecting Tablet Display turns off the Extended Desktop option.

Q Menu SoftwareHardware and Software Guide 7–11DRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmExternal Display When an optional display device, such as an external monitor or projector, is connected to the external monitor connector on the tablet PC:To display the image only on the display device:»Select External Display.✎Selecting External Display turns off the Extended Desktop option.Dual Display (Default)When an optional display device, such as an external monitor or projector, is connected to the external monitor connector on the tablet PC:To display the image on the tablet PC and the display device:»Select Dual Display.✎Selecting Dual Display turns off the Extended Desktop option.Extended DesktopThe Extended Desktop option extends the display from the tablet PC screen onto the external monitor screen. For example, you could use the Extended Desktop item to display an entire spreadsheet. The left side columns could be displayed on the tablet PC screen and the right side columns could be displayed on the external monitor.When an optional external monitor is connected to the external monitor connector on the tablet PC:To turn on the Extended Desktop option:»Select Extended Desktop.To turn off the Extended Desktop option:1. Press the Q Menu button.2. Select Tablet Display, External Display, or Dual Display.

Q Menu SoftwareHardware and Software Guide 7–13DRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmPortrait-SecondaryTo switch the image counterclockwise to portrait view from landscape view:»Select Portrait-Secondary.The default Portrait-Primary item switches the image clockwise to portrait view. Left-handed users may find the Portrait-Secondary item, which switches the image counterclockwise to portrait view, more convenient.✎HP recommends that you not use the Portrait-Secondary view while using the internal wireless. The positions commonly occupied by the tablet PC, external devices, and the user while the tablet PC is in the Portrait-Secondary view may obstruct the antennas.For exact antenna locations, refer to Chapter 1, “Tablet PC Features.”Landscape-SecondaryTo switch the image counterclockwise to landscape view from portrait view:»Select Landscape-Secondary.The default Landscape-Primary item switches the image clockwise to landscape view. Left-handed users may prefer to use the Landscape-Secondary item, which switches the image counterclockwise to landscape view.✎HP recommends that you not use the Landscape-Secondary view while using the internal wireless. The positions commonly occupied by the tablet PC, external devices, and the user while the tablet PC is in the Landscape-Secondary view may obstruct the antennas. For exact antenna locations, refer to Chapter 1, “Tablet PC Features.”

7–14 Hardware and Software GuideQ Menu SoftwareDRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmStandbyTo initiate Standby:»Select Standby.HibernateTo initiate Hibernation if Hibernation is enabled:»Select Hibernate.✎Hibernation is enabled by default. If Hibernation is not enabled, selecting Hibernate initiates Standby.To verify that Hibernation is enabled:»Select Start > Control Panel > Performance and Maintenance > Power Options > Hibernate tab. If Hibernation is enabled, the Enable Hibernation check box is selected.Shut DownTo immediately close the operating system and shut down the system:»Select Shut Down. You are not prompted to confirm this action.Power ControlsTo open the operating system Power Options Properties window:»Select Power Controls.Tablet PC Settings (Default)To open the operating system Tablet and Pen Settings window:»Select Tablet PC Settings.

Q Menu SoftwareHardware and Software Guide 7–15DRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmQ Menu Settings (Default)To open the Q Menu Settings window:»Select Q Menu Settings.Tablet PC Button DriverThe tablet PC button driver allows you to customize the pen-activated buttons and jog dial. You can program the buttons to perform various functions or open specific programs. Each button can be programmed to perform a different function for each orientation, or to perform the same function for all orientations.To customize a tablet PC button:1. Select Start > Control Panel > Printers and other Hardware > Tablet and Pen Settings.2. Select the Tablet Buttons tab.3. Select the orientation for which you want to program the button.4. Select the button you want to program in the Tablet Button column. The button is displayed in the Button location and Detailed view areas of the Tablet Buttons tab.5. To change the action associated with the button, select Change. The Change Tablet Button Actions dialog box is displayed.6. In the Action drop-down box, select the action that you want the button to perform.7. Select OK.8. Select Apply > OK on the Tablet and Pen settings dialog box.ÄCAUTION: The tablet PC button driver is integrated with the Q Menu software. If the Q Menu software is uninstalled or disabled, the button driver will not function.

7–16 Hardware and Software GuideQ Menu SoftwareDRAFT Revised: 8/24/04File: Chap7.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm

Hardware and Software Guide 8–1DRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm8WirelessIf your tablet PC is equipped with an integrated wireless device such as 802.11 or Bluetooth wireless devices, you have a wireless tablet PC. ■An 802.11 wireless tablet PC can connect to wireless networks in corporate offices, your home, and public places. Wireless networks include wireless local area networks (WLANs) or “hotspots.” Hotspots are wireless access points available in public places, such as airports, restaurants, coffee shops, hotels, and universities.■A Bluetooth wireless tablet PC can connect to other Bluetooth wireless-enabled devices using a wireless personal area network (PAN).

8–2 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmYour tablet PC has a button that may be used to enable and disable the 802.11 and Bluetooth wireless devices and an associated light to indicate the state of the wireless devices. The following illustration shows the wireless button 1 and light 2.In addition to the wireless button and light, your tablet PC has software controls that enable you to turn on, turn off, enable, and disable your wireless devices. The following table explains the software controls.WirelessControl DescriptionWirelessAssistantIs a software utility that enables you to turn on and off the 802.11 and Bluetooth wireless devices individually. For more information on using Wireless Assistant, refer to the “Turning On, Turning Off, Enabling and Disabling the 802.11 Wireless and Bluetooth Devices” section in this chapter.ComputerSetup controlsEnable and disable the 802.11 and Bluetooth wireless devices in Computer Setup. For more information about using Computer Setup to control the 802.11 and Bluetooth wireless devices, refer to Chapter 11, “Computer Setup.”

WirelessHardware and Software Guide 8–3DRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmWireless Local Area Network (Select Models Only)With the 802.11 wireless device, you can access a wireless local area network (WLAN), which is composed of other computers and accessories linked by a wireless router or a wireless access point.■A large scale WLAN, such as a corporate WLAN or public WLAN hotspot, typically use wireless access points, that can handle a large number of computers and accessories and can separate critical network functions. ■A home or small office WLAN typically uses a wireless router, which enables several wireless and wired computers to share an Internet connection, a printer, and files without additional pieces of hardware or software. Wireless access point and wireless router are often used interchangeably. Tablet PCs with 802.11 WLAN devices may support one or more of three IEEE physical layer standards: ■802.11a■802.11b■802.11gThere are three popular implementations of WLAN adapters:■802.11b only■802.11b/g■802.11a/b/g802.11b, the first popular WLAN standard, supports data rates of up to 11 Mbps and operates at a frequency of 2.4 GHz. 802.11g, which came later, also operates at 2.4 GHz but supports data rates of up to 54 Mbps. An 802.11g WLAN device is backward compatible with 802.11b devices, so they can operate on the same network. 802.11a supports data rates of up to 54 Mbps but operates at a frequency of 5 GHz. 802.11a is not compatible with

8–4 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm802.11b and 802.11g. For information on identifying the type of device in your tablet PC, refer to the “Identifying a WLAN Device” section in this chapter.Connecting Your Wireless Tablet PC to a Corporate WLANContact your network administrator or IT department for information on connecting your tablet PC to your corporate WLAN.Connecting Your Wireless Tablet PC to a Public WLANContact your ISP or search the Web for a list of public WLANs near you. Web sites that list public WLANs include Cisco Hotspot Locator, Hotspotlist, and Geektools.When you are within range of a public WLAN, a Wireless Network Connection interactive message is displayed at the bottom of the screen. Check with each public WLAN location for cost and connection requirements.

WirelessHardware and Software Guide 8–5DRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmSetting Up a WLAN in Your HomeTo set up a WLAN and connect to the Internet in your home, you need the following equipment. The illustration below shows an example of a completed wireless network installation that is connected to the Internet. This wireless network includes■An optional broadband modem (either DSL or cable) and high-speed Internet service purchased from an Internet service provider (ISP) 1.■An optional wireless router (purchased separately) 2.■Your wireless tablet PC 3.As this network grows, additional wireless and wired computers can be connected to the network to access the Internet.✎If you need technical assistance to install your WLAN, contact the router manufacturer or your ISP.

8–6 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmUsing a WLAN ConnectionTo use a WLAN connection:■Verify that all drivers required by the 802.11 wireless device are installed and that the 802.11 wireless device is correctly configured. ✎If you are using an integrated 802.11 wireless device, all required drivers are installed and the adapter is preconfigured and ready for use.■If you are using an integrated 802.11 wireless device, verify that the 802.11 wireless device is turned on. When the 802.11 wireless device is turned on, the wireless light is turned on. If the wireless light is off, turn on the 802.11 wireless device. Refer to the “Turning On, Turning Off, Enabling and Disabling the 802.11 Wireless and Bluetooth Devices”section.■For your home WLAN, verify that your router is correctly configured. For instructions, refer to your router documentation.✎Functional range for subsequent WLAN connections vary, depending on your tablet PC WLAN implementation, router manufacturer, and interference from varying types of walls and other electronic devices.For more information about using a WLAN connection:■Refer to information from your ISP and the documentation included with your wireless router and other WLAN equipment.■Access the information and Web site links provided at Start > Help and Support.■Refer to the documentation included with your tablet PC. The Troubleshooting guide on the Tablet PC Documentation CDcontains a section about wireless LAN device problems and resolutions.

WirelessHardware and Software Guide 8–7DRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmUsing Wireless Security FeaturesWhen you set up your own WLAN or access an existing WLAN, always ensure that security features are protecting the WLAN. If you do not enable security on your WLAN, an unauthorized wireless user can access your tablet PC data and use your Internet connection without your knowledge.The most common security levels are Wi-Fi Protected Access (WPA)-Personal and Wired Equivalent Privacy (WEP). In addition to enabling WPA-Personal or WEP security encryption on the router, you may want to use one or more of the following security measures:■Change the default network name (SSID) and password.■Use a firewall.■Set security on your Web browser.■Enable MAC address filtering on the router.For more information about WLAN security, refer to the HP Web site at http://www.hp.com/go/wireless for details.Installing Wireless Software (Optional)Microsoft Windows XP supports WLAN configuration with the Zero Client Configuration feature. HP provides a separate WLAN configuration utility that must be installed if you plan to use Cisco Compatible Extensions. Cisco Compatible Extensions enable wireless devices to use Cicso-based WLANs.

8–8 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmIdentifying a WLAN DeviceTo install HP WLAN software for an integrated 802.11 wireless device, you need to know the name of the integrated 802.11 wireless device on your tablet PC. To identify an integrated 802.11 wireless device:1. Display the names of all the 802.11 wireless devices on your tablet PC: a. Select Start > My Computer.b. Right-click in the My Computer window.c. Select Properties > Hardware tab > Device Manager > Network Adapters.2. Identify the 802.11 wireless device from the list that is displayed:❏The listing for an 802.11 wireless device includes the term wireless LAN, WLAN, or 802.11.❏If no 802.11 wireless device is listed, either your tablet PC does not have an integrated 802.11 wireless device, or the driver for the 802.11 wireless device is not properly installed.Accessing WLAN Software and DocumentationYour WLAN software is preloaded on your tablet PC and is available in the Software Setup utility. To install the WLAN software:»Select Start > All Programs > Software Setup, and then follow the instructions on the screen. (When you are prompted to select the software you want to install, select or clear the corresponding check boxes.)

WirelessHardware and Software Guide 8–9DRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmThe WLAN software is also available as a SoftPaq at the HP Web site. To access, download, and install the SoftPaq, use either of the following procedures:■Select Start > Help and Support.-or-■Visit the HP Web site at http://www.hp.com/support:a. Choose your language and region.b. Select the Download Drivers and Software radio buttonc. Enter your computer model information, and then follow the instructions provided at the Web site. ✎WLAN software is provided in the Network category. To access model information about your computer, refer to the serial number label. The serial number label is on the bottom of the tablet PC.To access documentation for your WLAN software:1. Install the WLAN software as instructed earlier in this chapter.2. Open the utility.3. Select Help on the menu bar.Troubleshooting 802.11 Wireless DevicesFor more troubleshooting information, visit the HP Web site (http://www.hp.com/go/wireless) or refer to the documentation included with your tablet PC. The Troubleshooting guide on the Tablet PC Documentation CD contains a section about wireless LAN device problems and resolutions.

WirelessHardware and Software Guide 8–11DRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm■Bluetooth serial port—Transfers data over the Bluetooth link using a virtual COM port.■Hands-Free—Enables a vehicle-embedded, hands-free unit or a tablet PC serving as a hands-free unit to establish a wireless connection to a cellular phone and to act as the Bluetooth cellular phone audio input and output mechanism.■Basic imaging—Provides a wireless connection between a Bluetooth-enabled camera and other Bluetooth devices. The camera can be controlled remotely by a tablet PC, and images can be transferred from a camera to be stored on a computer or to be printed.■Human interface device—Provides a wireless connection to other Bluetooth devices, such as keyboards, pointing devices, gaming devices, and remote monitoring devices.■Fax—Provides a Bluetooth connection that enables a tablet PC to send or receive a fax message using a Bluetooth cellular phone or modem.■Headset—Provides a wireless connection between a headset and a tablet PC or cellular phone. The headset acts as the device’s audio input and output mechanism and increases mobility.For more information about using Bluetooth with your tablet PC, refer to the Wireless Documentation CD included with your tablet PC.

8–12 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmTurning On, Turning Off, Enabling and Disabling the 802.11 Wireless and Bluetooth DevicesThe wireless button 1 enables and disables 802.11 wireless and Bluetooth devices in conjunction with Wireless Assistant. By default, the 802.11 wireless and Bluetooth devices and wireless light 2 are turned on when you turn on the tablet PC.✎Turning on a wireless device does not automatically create a WLAN or connect you to a WLAN. For information on setting up a WLAN refer to the “Wireless Local Area Network (Select Models Only)” section in this chapter.The 802.11 wireless and Bluetooth devices have two power states:■Enabled■Disabled

WirelessHardware and Software Guide 8–13DRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmYou can enable and disable the wireless devices in Computer Setup. For more information about using Computer Setup to control the 802.11 and Bluetooth wireless devices, refer to Chapter 11, “Computer Setup.” You can also enable and disable the wireless devices with the wireless button.When the wireless devices are enabled in Computer Setup and with the wireless button, you can use Wireless Assistant to turn on and off the devices individually.To view the state of your wireless devices, place the cursor over the Wireless Assistant icon in the notification area, or open Wireless Assistant by double-clicking the icon in the notification area. Wireless Assistant displays the status of the devices as on, off, or disabled. Wireless Assistant also displays the status of the devices in Computer Setup as enabled or disabled.For more information about Wireless Assistant:1. Open Wireless Assistant by double-clicking the icon in the notification area.2. Select the Help button.✎You cannot use the wireless button or Wireless Assistant to control the wireless devices if they are disabled in Computer Setup.

8–14 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmTurning On the 802.11 Wireless and Bluetooth DevicesIf And Then■Wireless Assistant shows that both WLAN and Bluetooth are off■Wireless light is offYou want to turn on either or both devices1. Right-click the WirelessAssistant icon in the notification area.2. Select the device or devices you want to turn on.✎If the wireless devices are turned off, pressing the wireless button disables both devices. The button does not turn on the devices.■Wireless Assistant shows that both WLAN and Bluetooth are disabled*■Wireless light is offYou want to turn on either or both devices1. Press the wireless button. (The devices return to their previous on or off state.)2. If the wireless devices are turned off, right-click the Wireless Assistant icon in the notification area.3. Select the device or devices you want to turn on.■Wireless Assistant shows that one device is on and the other device is off■Wireless light is onYou want to turn on either or both devices1. Right-click the WirelessAssistant icon in the notification area.2. Select the device or devices you want to turn on.*If the wireless devices are not both on when you disable the devices, pressing the wireless button again returns the devices to their previous on or off state. Pressing the button does not turn on both devices.

WirelessHardware and Software Guide 8–15DRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm✎If you want your wireless devices to be turned on when you turn on your tablet PC, you must turn them on before you shut down or restart.Turning Off and Disabling the 802.11 Wireless and Bluetooth DevicesIf And Then■WirelessAssistantshows that both WLAN and Bluetooth are on■Wireless light is onYou want to disable both devicesPress the wireless button.You want to turn off either or both devices1. Right-click the WirelessAssistant icon in the notification area.2. Select the device or devices you want to turn off.■WirelessAssistantshows that both WLAN and Bluetooth are off■Wireless light is offYou want to disable both devicesPress the wireless button.■WirelessAssistantshows that one device is on and the other device is off*■Wireless light is onYou want to disable both devicesPress the wireless button.You want to turn off both devices.1. Right-click the WirelessAssistant icon in the notification area.2. Select the device or devices you want to turn off.*If the wireless devices are not both on when you disable the devices, pressing the wireless button again returns the devices to their previous on or off state. Pressing the button does not turn on both devices.

8–16 Hardware and Software GuideWirelessDRAFT Revised: 8/24/04File: Chap8.fm PN: HP-376186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm

Hardware and Software Guide 9–1DRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm9SecuritySecurity Features Quick Reference✎Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen.In addition to the Windows operating system security measures, the tablet PC provides the following security features, most of which can be configured in Computer Setup. For more information, refer to Chapter 11, “Computer Setup” in this guide.To Protect Against Use This Security FeatureUnauthorized use of the tablet PC Power-on passwordUnauthorized access to the Computer Setup utility (f10)HP administrator passwordUnauthorized access to the contents of a hard driveDriveLockUnauthorized access to a Windows user accountOptional smart cardsAn enabled smart card can store the Windows user and Windows administrator passwords; therefore, both the smart card and the smart card PIN are required to access the account.✎This security feature is supported by only certain smart card readers.

9–2 Hardware and Software GuideSecurityDRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmSetting Security Preferences in Computer SetupMost security preferences are set in Computer Setup. Because Computer Setup is a non-Windows utility, it does not support the pointing devices on your tablet PC. When using Computer Setup, you must use the keys on your tablet PC to navigate and make selections.For more details, refer to Chapter 11, “Computer Setup.”Unauthorized access of data Windows Firewall softwareUnauthorized access to the BIOS settings and other system identification informationHP administrator password, which protects the system information in Computer Setup.Unauthorized removal of the tablet PCSecurity cable slot (used with an optional security cable)For more information on the security cable slot, refer to the “Connecting an Optional Security Cable” section in this chapter.To Protect Against Use This Security Feature

SecurityHardware and Software Guide 9–3DRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmUsing PasswordsÄCAUTION: If you forget both your DriveLock user and DriveLock master passwords, the hard drive is permanently locked and can no longer be used.Most security features use passwords. Whenever you set a password, write down the password and store it in a secure location away from the tablet PC.■If you forget your power-on password, you cannot start up the tablet PC or restore from Hibernation until a service partner resets the tablet PC. To contact a service partner, refer to the Worldwide Telephone Numbers booklet included with the tablet PC.■If you forget your HP administrator password, you will not be able to access Computer Setup.■If you forget the DriveLock user password but know your DriveLock master password, you can remove DriveLock protection from the drive. For instructions, refer to the “Using DriveLock” section in this chapter.

9–4 Hardware and Software GuideSecurityDRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmHP and Windows PasswordsHP security features and Windows operating system security features work independently from one another. For example, a device disabled in Computer Setup cannot be enabled in Windows.HP passwords and Windows passwords are also independent of one another. The following table lists the different passwords used by HP and Windows and describes their functions.HP Passwords* FunctionHP administrator password Used to access Computer Setup.Power-on password Used to access the tablet PC during Startup and when you restart the tablet PC.DriveLock user password Used by the day-to-day user to access drives protected by DriveLock at startup.DriveLock master password Used by the HP administrator to access drives protected by DriveLock and to remove DriveLock protection from the drive.Smart card PIN Stores the Windows administrator and user passwords and is used to access Windows during startup on tablet PCs.Power-on and HP administrator passwords can be stored on smart cards if an optional smart card reader supports this functionality.*HP passwords must be enabled in Computer Setup. For more information, refer to Chapter 11, “Computer Setup.”

SecurityHardware and Software Guide 9–5DRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmHP and Windows Password GuidelinesHP and Windows passwords are not interchangeable. You must use an HP password at an HP password prompt and a Windows password at a Windows password prompt. For example:■If a power-on password is set, the power-on password (not a Windows password) must be entered when the tablet PC starts up or restores from Hibernation.■If you set Windows to prompt for a password before resuming from Standby, a Windows password (not a power-on password) must be entered to resume from Standby.The same word or series of letters or numbers used for an HP password can be used for another HP password or for a Windows password, with these considerations:■HP passwords can be any combination of up to 32 letters and numbers and are not case sensitive.■An HP password must be set and entered with the same type of keys. For example, an HP password set with keyboard number keys will not be recognized if it is entered with embedded numeric keypad number keys. For information about the embedded numeric keypad, refer to the “Keypads” section in Chapter 3, “Pointing Devices and Keyboard.”Windows PasswordsAdministrator password Used to log on to the tablet as the Windows administrator after Windows has been configured to prompt for a password at startup.User password Used to log on to the tablet PC as a user after Windows has been configured to prompt for a password at startup.

9–6 Hardware and Software GuideSecurityDRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmUsing Power-On PasswordsA power-on password prevents unauthorized use of the tablet PC. After it is set, a power-on password must be entered each time the tablet PC is turned on or restarted. A power-on password:■Does not display as it is set, entered, changed, or deleted.■Must be set and entered with the same keys. For example, a power-on password set with keyboard number keys will not be recognized if you enter it with keypad number keys.■Can include any combination of up to 32 letters and numbers and is not case sensitive.Setting Power-On PasswordsA power-on password is set, changed, or deleted in Computer Setup. To manage the password:1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.2. Use the arrow keys to select Security > Power-On password, and then press enter.❏To set a power-on password, type the password in the New Password and Verify New Password fields, and then press f10.❏To change a power-on password, type the current password in the Old Password field, type the new password in the New Password and Verify New Password fields, and then press f10.❏To delete a power-on password, type the current password in the Old Password field, and then press f10.

SecurityHardware and Software Guide 9–7DRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm3. To save your preferences, use the arrow keys to select File > Save Changes and Exit. Then follow the instructions on the screen.Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts.Entering Power-On PasswordsAt the power-on password prompt, type your password, and then press enter. After 3 unsuccessful attempts to enter the password, you must restart the tablet PC and try again.Requiring a Power-On Password at RestartYou can require that a power-on password be entered each time the tablet PC is restarted. Enable and disable this feature in Computer Setup.1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.2. Use the arrow keys to select Security > Password options > Require password on restart.3. Toggle the field to enable or disable, and then press enter.4. Save your preferences by using the arrow keys to select File > Save Changes and Exit. Then follow the instructions on the screen.Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts.

9–8 Hardware and Software GuideSecurityDRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmUsing HP Administrator PasswordsThe HP administrator password protects the configuration settings and system identification information in Computer Setup. After it is set, this password must be entered to access Computer Setup. The HP administrator password■Is not interchangeable with a Windows administrator password, although both can use the same word or series of letters, or numbers.■Does not display as it is set, entered, changed, or deleted.■Must be set and entered with the same keys. For example, an HP administrator password set with keyboard number keys will not be recognized if you enter it with embedded numeric keypad number keys.■Can include any combination of up to 32 letters and numbers and is not case sensitive.Setting HP Administrator PasswordsAn HP administrator password is set, changed, or deleted in Computer Setup. To manage the password:1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.2. Use the arrow keys to select the Security menu > Administrator Password, and then press enter.❏To set an HP administrator password, type your password in the New Password and Verify New Password fields, and then press f10.

SecurityHardware and Software Guide 9–9DRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm❏To change an HP administrator password, type your current password in the Old Password field, type the new password in the New Password and Verify New Password fields, and then press f10.❏To delete an HP administrator password, type your current password in the Old Password field, and then press f10.3. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save Changes and Exit. Then follow the instructions on the screen.Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts.Entering HP Administrator PasswordsAt the Computer Setup prompt, type your Administrator Password (using the same type of keys you used to set the password), and then press enter. After 3 unsuccessful attempts to enter the HP administrator password, you must restart the tablet PC and try again.Using DriveLockÄCAUTION: If you forget the DriveLock user and DriveLock master passwords, the hard drive is permanently unusable.DriveLock prevents unauthorized access to the contents of a hard drive. After DriveLock protection is applied to a drive, a password must be entered to access the drive. The drive must be inserted into the tablet PC, not an optional docking device (select models only) or external MultiBay, in order for it to be accessed by the DriveLock passwords.

9–10 Hardware and Software GuideSecurityDRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmDriveLock involves a user password and a master password:■A hard drive protected by DriveLock can be accessed with either the user password or the master password.■You can delete a user password or master password only by removing DriveLock protection from the drive. DriveLock protection can be removed from the drive only with the master password.■The owner of the user password should be the day-to-day user of the protected hard drive. The owner of the master password may be a system administrator or the day-to-day user.■A user password and a master password can be the same word.✎When you start the tablet PC from a hard drive protected with DriveLock, and your power-on and DriveLock passwords are identical, you will be prompted to enter only a power-on password instead of both a power-on and a DriveLock password.Setting DriveLock PasswordsÄCAUTION: If you forget the DriveLock user and the DriveLock master passwords, the hard drive is permanently unusable.ÄCAUTION: To prevent system lockup and loss of information:■Shut down the tablet PC before removing the hard drive from the hard drive bay. Do not remove the hard drive while the tablet PC is on, in Standby, or in Hibernation.■If you are not sure whether the tablet PC is off or in Hibernation, turn the tablet PC on by pressing the power/standby switch to the left or right. Then shut down the tablet PC through the operating system.

SecurityHardware and Software Guide 9–11DRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmTo access the DriveLock settings in Computer Setup:1. Shut down the tablet PC. If you are not sure whether the tablet PC is off or in Hibernation, turn the tablet PC on by pressing the power/standby switch to the left or right, and then shut down the tablet PC through the operating system.2. Insert the hard drive into the tablet PC (not into an optional docking device or external MultiBay).3. Open Computer Setup by turning on (not restarting) the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.4. Use the arrow keys to select the Security menu > DriveLock passwords. Then press enter.5. Select the location of the hard drive, and then press f10.6. Toggle the Protection field to Enable.7. Read the warning. To continue, press f10.8. Type your user password in the New Password and Verify New Password fields, and then press f10.9. Type your master password in the New Password and Verify New Password fields, and then press f10.10. To confirm DriveLock protection on the drive you have selected, type DriveLock in the confirmation field, and then press f10.11. To save your DriveLock settings, select File > Save Changes and Exit. Then follow the instructions on the screen.Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts.

9–12 Hardware and Software GuideSecurityDRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmEntering DriveLock Passwords1. Be sure that the drive is inserted into the tablet PC (not an optional docking device or external MultiBay).2. When prompted for a DriveLock password, type your user or master password (using the same type of keys you used to set the password), and then press enter.3. After 2 incorrect attempts to enter the password, you must restart the tablet PC and try again.Requiring a Drivelock Password at RestartYou can require that a DriveLock password be entered each time the tablet PC is restarted. Enable and disable this feature in Computer Setup.1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.2. Use the arrow keys to select Security > Password options > Require password on restart.3. Toggle the field to enable or disable, and then press enter.4. Save your preferences by using the arrow keys to select File > Save Changes and Exit. Then follow the instructions on the screen.Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts.

SecurityHardware and Software Guide 9–13DRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmChanging DriveLock PasswordsÄCAUTION: To prevent loss of work and damage to the tablet PC and the hard drive, shut down the tablet PC before inserting or removing a hard drive. (The hard drive is any hard drive used in the hard drive bay.)To access the DriveLock settings in Computer Setup:1. Shut down the tablet PC. If you are not sure whether the tablet PC is off or in Hibernation, turn the tablet PC on by pressing the power/standby switch to the left or right, and then shut down the tablet PC through the operating system.2. Be sure that the hard drive is inserted into the tablet PC (not into an optional docking device or external MultiBay).3. Open Computer Setup by turning on (not restarting) the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower left of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.4. Use the arrow keys to select the Security menu > DriveLock passwords, and then press enter.5. Use the arrow keys to select the location of the hard drive, and then press f10.6. Use the arrow keys to select the field for the password you want to change, type your current password in the Old Password field, type the new password in the New Password and in the Verify New Password fields. Then press f10.7. To save your preferences, use arrow keys to select File > Save Changes and Exit, and then follow the instructions on the screen.Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts.

9–14 Hardware and Software GuideSecurityDRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmRemoving DriveLock ProtectionTo access the DriveLock settings in Computer Setup:1. Shut down the tablet PC. If you are not sure whether the tablet PC is off or in Hibernation, turn the tablet PC on by pressing the power/standby switch to the left or right, and then shut down the tablet PC through the operating system.2. Be sure that the hard drive is inserted into the tablet PC (not into an optional docking device or external MultiBay).3. Open Computer Setup by turning on (not restarting) the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.4. Use the arrow keys to select the Security menu > DriveLock passwords, and then press enter.5. Use the arrow keys to select the location of the hard drive, and then press f10.6. Toggle the Protection field to Disable, and then press f10.7. Type your master password in the Old Password field. Then press f10.8. To save your preferences, use arrow keys to select File > Save Changes and Exit. Then follow the instructions on the screen.Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts.

SecurityHardware and Software Guide 9–15DRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmDisabling a DeviceFrom the Computer Setup Device Security menu, you can disable or partially disable most ports and drives.1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.2. Select the Security menu > Device Security, and then enter your preferences.3. To confirm your preferences, press f10.4. To save your preferences, select File > Save Changes and Exit. Then follow the instructions on the screen.Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts.Using System InformationSystem information provides details about your tablet PC and battery pack. The following sections explain how to prevent other users from viewing system information and how to configure system information options in Computer Setup.System Information options allow you to■Display or enter the tablet PC serial number, asset tag, and ownership tag.■Display a battery pack serial number.✎To prevent unauthorized access to this information, you must create an HP administrator password. For instructions, refer to the “Setting HP Administrator Passwords,” section earlier in this chapter.

9–16 Hardware and Software GuideSecurityDRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmSetting System Information Options1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower left of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.2. Access or set your preferences by following these directions:❏To view general system information, select the Filemenu > System Information.❏To view or enter identification values for system components, select the Security menu > System IDs.3. To confirm the information or your preferences, press f10.4. To save your information or preferences, use the arrow keys to select File > Save Changes and Exit, and then follow the instructions on the screen.Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts.Firewall SoftwareWhen you use the tablet PC for e-mail, network, or Internet access, it is possible for unauthorized persons to obtain information about you, your tablet PC, and your data. To protect your privacy, it is recommended that you use firewall software.The Windows operating system firewall is available on your tablet PC and is enabled by default. To learn more about this firewall or to disable or reenable this firewall: 1. Select Start > Control Panel > Network and Internet Connections > Windows Firewall.

SecurityHardware and Software Guide 9–17DRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm2. Select the General tab.❏To learn more about Windows Firewall, select the Learn more about Windows Firewall link.❏To disable Windows Firewall, select Off (not recommended).❏To reenable Windows Firewall, select On(recommended).3. Select OK.Under some circumstances a firewall can block access to Internet games, interfere with printer or file sharing on a network, or block authorized email attachments. If you are using Windows Firewall and an application attempts an inbound connection to your tablet PC for the first time, a security alert will be displayed. The security alert allows you to configure the firewall permission for the application.■To allow the application to connect to your tablet PC, select Unblock this program. The application is added to the Exceptions list and will not be blocked by Windows Firewall.■To permanently block the application, select Keep blocking this program. Windows Firewall will block the application anytime the application tries to connect.■To temporarily block the application, select Keep blocking this program, but ask me again later. The next time the application attempts to connect to your tablet PC, you will receive the security alert.

9–18 Hardware and Software GuideSecurityDRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmTo manually add an application to the Windows Firewall Exceptions list so that it will not be blocked by the firewall:1. Select Start > Control Panel > Network and Internet Connections > Windows Firewall.2. Select the Exceptions tab.3. Select Add Program and enter the required information about the application.4. Select OK. The application is added to the Exceptions list and will not be blocked by Windows Firewall.If you are using an optional firewall and you want to allow a blocked application to connect:■Temporarily solve the problem by disabling the firewall, performing the task, and then reenabling the firewall.■Permanently resolve the problem by reconfiguring the firewall. Refer to the firewall documentation or contact the firewall manufacturer.

SecurityHardware and Software Guide 9–19DRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmConnecting an Optional Security Cable✎Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen.To install a security cable:1. Loop the security cable around a secured object.2. Insert the key 1 into the cable lock 2.3. Insert the cable lock into the security cable slot 3, and lock the cable lock with the key.

9–20 Hardware and Software GuideSecurityDRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmHP ProtectTools Security Manager (Select Models Only)Your tablet PC comes with HP ProtectTools Security Manager preinstalled. This software is accessed through Microsoft®Windows® Control Panel. It provides security features that are designed to help protect against unauthorized access to the tablet PC, networks, and critical data. Add-on modules for HP ProtectTools Security Manager include the following:■Embedded Security for ProtectsTools■Credential Manager for ProtectTools■BIOS Configuration for ProtectTools■Smart Card Security for ProtectToolsDepending on your tablet PC model, add-on modules may be preinstalled, preloaded, or downloaded from the HP Web site. Visit http://www.hp.com for more information.Embedded Security for ProtectTools✎You must have the embedded security chip in your tablet PC in order to use Embedded Security for ProtectTools.Embedded Security for ProtectTools has security features that protect against unauthorized access to user data or credentials, which include:■Administrative functions, such as ownership and management of the owner pass phrase.■User functions, such as user enrollment and management of user pass phrases.

SecurityHardware and Software Guide 9–21DRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm■Settings configuration, including setting up enhanced Microsoft EFS and Personal Secure Drive for protecting user data.■Management functions, such as backing up and restoring the key hierarchy.Credential Manager for ProtectToolsCredential Manager for ProtectTools has security features that provide protection against unauthorized access to your tablet PC, including the following:■Alternatives to passwords when logging on to Microsoft Windows.■Single sign-on capability that automatically remembers credentials for Web sites, applications, and protected network resources.■Support for optional security devices, such as Smart Cards and biometric fingerprint readers.For more information, refer to the Credential Manager for ProtectTools online documentation.BIOS Configuration for ProtectToolsBIOS Configuration for ProtectTools provides access to BIOS security and configuration settings within the HP ProtectTools Security Manager application, which gives users better access to system security features that are managed by the system BIOS.With BIOS Configuration for ProtectTools, you can:■Access to power-on user and administrator password management.■Configure preboot authentication features, such as smart card and power-on password. ■Enable and disable hardware features (such as the enable CD-ROM boot).

9–22 Hardware and Software GuideSecurityDRAFT Revised: 8/24/04File: Chap9.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm■Configure boot options, which includes disabling the ability to boot to drives other than the primary hard drive.✎Many of the features in BIOS Configuration for ProtectTools are also available in Computer Setup. Refer to Chapter 11, “Computer Setup” for additional information.For more information, refer to the BIOS Configuration for ProtectTools online documentation.Smart Card Security for ProtectToolsWith Smart Card Security for ProtectTools, you can:■Access optional smart card security features. Security enhancements are supported by the optional HP ProtectTools Smart Card and an optional supported reader, such as the HP PC Card Smart Card Reader. ■Initialize an HP ProtectTools Smart Card so that it can be used with Credential Manager for ProtectTools.■Work with the BIOS to enable optional smart card authentication in a preboot environment, and to configure separate smart cards for an administrator and a user. ■Set and change the password used to authenticate users to the smart card.■Backup and restore credentials stored on the smart card.For more information, refer to the Smart Card Security for ProtectTools online documentation.

Hardware and Software Guide 10–1DRAFT Revised: 8/24/04File: Chap10.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm10MultiBootA bootable medium or network interface card (NIC) contains files that the tablet PC needs to start and operate properly. The MultiBoot utility, disabled by default, enables you to identify the devices and control the sequence in which the system attempts to boot from those devices as it starts up your tablet PC.Bootable devices include optical drive discs, such as CDs or DVDs, bootable diskettes, or NICs.✎Some devices, including USB devices and NICs, must be enabled in Computer Setup before they can be included in the boot sequence. For more information, refer to “Enabling Bootable Devices in Computer Setup” in this chapter.Understanding the Default Boot SequenceBy default, when more than one bootable device is in the system, the tablet PC chooses the startup device by searching enabled devices and locations in a predetermined sequence.On every boot, the system looks for bootable drive A devices first. If it fails to find a bootable drive A device, it searches for bootable drive C devices. Drive A devices include optical drives and diskette drives. Drive C devices include optical drives and primary hard drives.The primary hard drive can only boot as drive C. The NIC does not have a drive letter assigned to it.

10–2 Hardware and Software GuideMultiBootDRAFT Revised: 8/24/04File: Chap10.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm✎An optical drive device (such as a CD-ROM drive) can boot either as drive A or drive C, depending on the format of the CD. Most bootable CDs boot as drive A. If you have a CD that boots as the C drive, the system will boot the diskette drive before it boots the CD.By default, the tablet PC selects the startup device by searching enabled devices and locations in a predetermined sequence.You can change the sequence in which the tablet PC searches for a startup device by enabling MultiBoot and entering a new startup sequence, also called a boot order. Or, you can use MultiBoot Express to set the tablet PC to prompt you for a startup location each time the tablet PC is started or restarted.The list below describes the default sequence in which drive numbers are assigned. (The actual startup sequence varies by configuration.)■Default sequence for devices that boot as drive A:a. Optical drive in an optional docking device MultiBay or in an external MultiBay that contains a disc that boots as drive A.b. Diskette drive in an optional docking device or in an external MultiBay.■Default sequence for devices that boot as drive C:a. An optical drive in an optional docking device MultiBay or in an external MultiBay that contains a disc that boots as drive C.b. Hard drive in the tablet PC primary hard drive bay.c. Hard drive in an optional docking device MultiBay or in an external MultiBay.✎Since no drive letter is associated with the NIC, changing the boot order of a NIC does not affect drive letters of the other devices.

MultiBootHardware and Software Guide 10–3DRAFT Revised: 8/24/04File: Chap10.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmEnabling Bootable Devices in Computer SetupThe tablet PC can start up from a USB device or the NIC only if that device has been enabled for inclusion in MultiBoot.To enable a device or location for inclusion in MultiBoot:1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.2. To enable bootable media in USB drives or in drives inserted into an optional docking device, use the arrow keys to select Advanced > Device options. Then select Enable USB legacy support.-or-To enable a NIC, select Security > Device security.3. Save your preferences and exit Computer Setup, by using the arrow keys to select File > Save changes and exit, and then follow the instructions on the screen.Your preferences are set when you exit Computer Setup and they take effect when the tablet PC restarts.✎To connect a NIC to a Preboot eXecution Environment (PXE) or Remote Program Load (RPL) server during startup without using MultiBoot, quickly press f12 when the Network Service Boot message appears in the lower-right corner of the screen.

10–4 Hardware and Software GuideMultiBootDRAFT Revised: 8/24/04File: Chap10.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmUnderstanding MultiBoot ResultsBefore changing the startup sequence, consider the following:■When the tablet PC restarts after the boot order has been changed, it considers only the first device of each drive type when searching for a startup device (except for optical devices). For example, the tablet PC is connected to an optional docking device containing an optical drive and a diskette drive. In the default boot sequence, the optical drive comes before the diskette drive. If the system fails to boot to the optical drive (either because it does not contain a disc or because the disc is not bootable) it does not try to boot to the diskette drive. Instead, it tries to boot to he first hard drive device present in the system. However, if there are two optical devices, and the first optical device does not boot, the system tries to boot to other optical devices in the system.■Changing the boot sequence also changes the logical drive designations. For example, if you start up from a CD-ROM drive with a disc that boots as drive C, that CD-ROM drive becomes drive C and the hard drive in the hard drive bay becomes drive D.■Starting up from a NIC does not affect logical drive designations because no drive letter is associated with the NIC.■Drives in an optional docking device are treated like external USB devices in the boot sequence and must be enabled in Computer Setup.

MultiBootHardware and Software Guide 10–5DRAFT Revised: 8/24/04File: Chap10.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmSetting MultiBoot PreferencesThere are two ways to set MultiBoot sequences:■Set a new default boot sequence that the tablet PC uses each time it starts up.■Use variable boot sequences using MultiBoot Express. This feature prompts you for a startup device each time the tablet PC is started or restarted.Setting a New Default Boot SequenceTo set a startup sequence that the tablet PC uses each time it is started or restarted with Computer Setup:1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.2. Use the arrow keys to select Advanced > Boot options, andthen press enter.3. Toggle the MultiBoot field to Enable.4. Toggle the Boot Order fields to the boot sequence that you prefer.5. Save your preferences and exit Computer Setup by using the arrow keys to select File > Save changes and exit, and then follow the instructions on the screen.Your preferences are set when you exit Computer Setup, and they take effect when the tablet PC restarts.

MultiBootHardware and Software Guide 10–7DRAFT Revised: 8/24/04File: Chap10.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmEntering MultiBoot Express PreferencesWhen the Express Boot menu is displayed during startup:■To specify a startup location from the Express Boot menu, select your preference within the allotted time, and then press enter.■To prevent the tablet PC from defaulting to the current MultiBoot setting, press any key before the allotted time expires. The tablet PC will not start up until you select a startup location and press enter.■To allow the tablet PC to start up according to the current MultiBoot settings, wait for the allotted time to expire.

10–8 Hardware and Software GuideMultiBootDRAFT Revised: 8/24/04File: Chap10.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm

Hardware and Software Guide 11–1DRAFT Revised: 8/24/04File: Chap11.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm11Computer SetupUsing Computer Setup Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load. If the operating system is working, the tablet PC restarts the operating system after you exit Computer Setup.✎Pointing devices are not supported in Computer Setup; you must use the keyboard to navigate and make selections.✎An external keyboard connected by USB can be used with Computer Setup only if USB legacy support is enabled. For more information about USB, refer to the “Connecting a USB Device”section in the “Hardware Components” chapter in this guide.The menu tables later in this chapter provide an overview of Computer Setup options.

11–2 Hardware and Software GuideComputer SetupDRAFT Revised: 8/24/04File: Chap11.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmAccessing Computer Setup The information and settings in Computer Setup are accessed from the File, Security, Tools, and Advanced menus.1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left of the screen.❏To change the language, press f2.❏To view navigation information, press f1.❏To return to the Computer Setup menu, press esc.2. Select the File, Security, Tools, or Advanced menu.3. To exit Computer Setup, choose one of the following:❏To exit without saving any changes, use the arrow keys to select File > Ignore changes and exit, and then follow the instructions on the screen.❏To exit and save all the settings you have entered, use the arrow keys to select File > Save changes and exit, and then follow the instructions on the screen.Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts.Restoring Computer Setup DefaultsTo return all settings in Computer Setup to the values that were set at the factory:1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower left of the screen.❏To change the language, press f2.❏To view navigation information, press f1.2. Use the arrow keys to select File > Restore defaults.3. Select the Restore Defaults check box.

Computer SetupHardware and Software Guide 11–3DRAFT Revised: 8/24/04File: Chap11.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm4. To confirm the restoration, press f10.5. Select File > Save changes and exit, and then follow the instructions on the screen.When the computer restarts, the factory settings are restored, and any identification information you may have entered is saved.Selecting from the File MenuSelect To Do ThisSystem Information ■View identification information about the tablet PC and any battery packs in the system.■View specification information about the processor, memory and cache size, video revision, keyboard controller version, and system ROM.Save to floppy Save system configuration settings to a diskette.Restore from floppy Restore system configuration settings from a diskette.Restore defaults Replace configuration settings in Computer Setup with factory default settings. (Identification information is retained.)Ignore changes and exit Cancel changes entered during the current session. Then exit and restart the tablet PC.Save changes and exit Save changes entered during the current session. Then exit and restart the tablet PC. The changes you save are in effect when the tablet PC restarts.

11–4 Hardware and Software GuideComputer SetupDRAFT Revised: 8/24/04File: Chap11.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmSelecting from the Security Menu.Select This Option To Do ThisAdministrator password Enter, change, or delete an HP Administrator password.Power-On password Enter, change, or delete a power-on password.Password options ■Enable/disable stringent security■Enable/disable required password on restartDriveLock passwords Enable/disable DriveLock; change a DriveLock user or master password.✎DriveLock settings are accessible only when you enter Computer Setup by turning on (not restarting) the tablet PC.Smart Card Security Enable/disable power-on support for smart cards.✎This feature is supported by select smart card readers only.

Computer SetupHardware and Software Guide 11–5DRAFT Revised: 8/24/04File: Chap11.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmEmbedded Security ■Enable/Disable the embedded security chip.■Restore embedded security chip to factory settings.■Enable/disable power-on authentication support.■Enable/disable automatic DriveLock.■Reset power-on authentication credential.✎Embedded Security settings are accessible only if the tablet PC is equipped with an embedded security chip.Device security ■Enable/disable devices in the system.■Enable NIC for inclusion in MultiBoot.System IDs Enter user-defined identification values.Select This Option To Do This

11–6 Hardware and Software GuideComputer SetupDRAFT Revised: 8/24/04File: Chap11.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmSelecting from the Tools MenuSelecting from the Advanced MenuSelect To Do ThisHDD Self Test options Run a quick or comprehensive self-test on any hard drive in the system.Battery Information View information about any battery packs in the tablet PC.Memory Check ■Run a self-test on memory modules in the tablet PC.■View information about memory modules installed in the tablet PC.Select To Do This Language (or press f2) Change the Computer Setup language.Boot options ■Enable/disable QuickBoot, which starts the tablet PC more quickly by eliminating some startup tests. (If you suspect a memory failure and want to test memory automatically during startup, disable QuickBoot.)■Enable/disable MultiBoot, which sets a startup sequence that can include most bootable devices and media in the system. For details, refer to the “MultiBoot” chapter.■Set the boot order.

Computer SetupHardware and Software Guide 11–7DRAFT Revised: 8/24/04File: Chap11.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmDevice options ■Enable/disable num lock mode at startup.■Enable/disable multiple standard pointing devices at startup. (To set the tablet PC to support only a single, usually nonstandard, pointing device at startup, select Disable.)■Select a parallel port mode: EPP (Enhanced Parallel Port), standard, bidirectional, or ECP (Enhanced Capabilities Port).■Enable/disable USB legacy support for a USB keyboard, mouse, and hub. When USB legacy support is enabled:❐A USB keyboard, mouse, and hub work even when a Windows operating system is not loaded.❐The tablet PC starts from a bootable hard drive, diskette drive diskette, or CD, CD-RW, or DVD inserted into a drive connected by a USB connector to the tablet PC or to an optional docking device.■Enable/disable all settings in the SpeedStep window. (When Disable is selected, the tablet PC runs in Battery Optimized mode.)■Swap the functions of the fn key and left ctrl key.Select To Do This

11–8 Hardware and Software GuideComputer SetupDRAFT Revised: 8/24/04File: Chap11.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm

Hardware and Software Guide 12–1DRAFT Revised: 8/24/04File: Chap12.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm12HP Client ManagementSolutionsHP Client Management Solutions provides standards-based solutions for managing client (user) desktop, workstation, and tablet PCs in a networked environment.The key capabilities and features of client management are■Initial software image deployment.■Remote system software installation.■Software management and updates.■ROM updates.■Tracking and security of computer assets (the hardware and software installed on the computer).■Fault notification and recovery of certain system software and hardware components.✎Support for specific features described in this chapter may vary, depending on the computer model and/or version of management software installed on your computer.

12–2 Hardware and Software GuideHP Client Management SolutionsDRAFT Revised: 8/24/04File: Chap12.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmConfiguration and DeploymentHP computers come with a preinstalled system software image. The initial software image is configured during the first-time setup of the computer. After a brief software “unbundling” occurs, the computer is ready to be used.A customized software image can be deployed (distributed) by■Installing additional software applications after unbundling the preinstalled software image.■Using software deployment tools, such as Altiris Deployment Solutions, to replace the preinstalled software with a customized software image.■Using a disk cloning process to copy the contents from one hard drive to another.The deployment method you should use depends on your organization’s technology environment and processes. Visit the HP Web site at http://www.hp.com/go/pcsolutions for more information on selecting the best deployment method for your organization.✎The system recovery discs, Computer Setup utility, and other system features provide further assistance with recovery of system software, configuration management and troubleshooting, and power management.HP Client Manager SoftwareHP Client Manager Software (HP CMS) integrates HP Intelligent Manageability technology within Altiris software. HP CMS provides superior hardware management capabilities for HP devices. It provides■Detailed views of hardware inventory for asset management.■PC health check monitoring and diagnostics.

HP Client Management SolutionsHardware and Software Guide 12–3DRAFT Revised: 8/24/04File: Chap12.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm■Web-accessible reporting of business-critical details, such as machines with thermal warnings and memory alerts.■Remote updating of system software such as device drivers and ROM BIOS.✎Additional functionality can be added when HP CMS is used with optional Altiris Solutions software (purchased separately).For more information on HP Client Manager, visit the HP Web site at http://www.hp.com/go/easydeploy.

12–4 Hardware and Software GuideHP Client Management SolutionsDRAFT Revised: 8/24/04File: Chap12.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm

Hardware and Software Guide 13–1DRAFT Revised: 8/24/04File: Chap13.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pm13Software Update andRecoveriesPreparing to Update SoftwareFor optimal tablet PC performance and to make sure your tablet PC remains compatible with changing technologies, HP recommends that you install the latest versions of HP software as they become available.To update HP software:1. Prepare for any update by identifying your tablet PC type, series or family, and model; refer to “Accessing Tablet PC Information” later in this chapter. Prepare for a system ROM update by identifying (through the Computer Setup utility) the ROM versions currently installed on the tablet PC.2. Access the updates through your local HP Web site or the Support Software CD (purchased separately).3. Download and install the updates.✎The tablet PC system ROM stores the BIOS. The BIOS determines how the tablet PC hardware interacts with the operating system and external devices and also supports such tablet PC services as time and date. ✎If your tablet PC connects to a network, HP recommends that you consult with your network administrator before installing any software updates, especially system ROM updates.

13–2 Hardware and Software GuideSoftware Update and RecoveriesDRAFT Revised: 8/24/04File: Chap13.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmObtaining the Support Software CDThe Support Software CD provides HP software updates and installation instructions. The CD includes device drivers, ROM updates, and utilities.To purchase the current Support Software CD or a subscription that provides both the current version and future versions of the CD, visit the HP Web site at http://www.hp.com.Accessing Tablet PC InformationTo access the updates for your tablet PC, the following information will be needed:■The product category is Tablet PC.■The product family name and series number are printed in the lower-right corner of the display bezel.■Model information is provided on the serial number label on the bottom of the tablet PC.To determine whether available ROM updates contain later ROM versions than those currently installed on the tablet PC, you need to know the version of the system ROM currently installed.

Software Update and RecoveriesHardware and Software Guide 13–3DRAFT Revised: 8/24/04File: Chap13.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmTo display ROM information in Computer Setup:1. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower left of the screen.❏To change the language, press f2.❏For navigation instructions, press f1.2. Select File > System Information. The system ROM information is displayed.3. To exit Computer Setup without changing any settings, use the arrow keys to select File > Ignore changes and exit, andthen follow the instructions on the screen. After Computer Setup closes, the tablet PC restarts in Windows.For information about using Computer Setup, refer to the “Computer Setup” chapter.Downloading Software from the InternetMost software on the HP Web site is packaged in compressed files called a SoftPaqs. Some ROM updates may be packaged in compressed files called RomPaqs. Other ROM updates may be provided as CPQFlash SoftPaqs.Most download packages contain a file named Readme.txt. A Readme.txt file contains information regarding installing and troubleshooting the file. The Readme.txt files included with RomPaqs are in English.

13–4 Hardware and Software GuideSoftware Update and RecoveriesDRAFT Revised: 8/24/04File: Chap13.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmDownloading System ROMÄCAUTION: To prevent an unsuccessful installation, download and install the system ROM only while the tablet PC is connected to reliable external power using the AC adapter. Do not download or install the system ROM while the tablet PC is running on battery power, docked in an optional port replicator, or connected to an optional power source. During the download and installation:■Do not unplug the tablet PC from the electrical outlet.■Do not shut down the tablet PC.■Do not remove or insert a drive.To download and install a system ROM:1. Access the page on the HP Web site that provides software for your tablet PC.2. Follow the instructions on the screen to locate the system ROM you want to download.3. At the download area:a. Write down the information (date and name) of any update that is later than the system ROM currently installed on your tablet PC.b. Select the software you want and follow the download instructions on the screen.4. When the download is complete, open Windows Explorer.5. In Windows Explorer, select My Computer, then the hard drive designation (usually drive C), and then the folder to which you saved the downloaded item.6. In the folder, select the name or number of the software package containing the system ROM update. The system ROM installation begins.7. To complete the installation, follow the instructions on the screen.✎After a message on the screen reports a successful installation, you can delete the download package from the folder.

Software Update and RecoveriesHardware and Software Guide 13–5DRAFT Revised: 8/24/04File: Chap13.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmDownloading Other SoftwareTo download and install other software:1. Access the page at the HP Web site that provides software for your tablet PC.2. Follow the instructions on the screen to find the software you want to update.3. At the download area, select the software you want and follow the downloading instructions on the Web page.4. When the download is complete, open Windows Explorer.5. In Windows Explorer, select My Computer, then the hard drive designation (usually drive C), and then the folder to which you saved the downloaded item.6. In the folder, select the name or number of the software package containing the update.7. Select the file that includes an .EXE extension—for example, FILENAME.EXE. The installation begins.8. To complete the installation, follow the instructions on the screen.✎After a message on the screen reports a successful installation, you can delete the download package from the folder.System RecoveryThe tablet PC system recovery process provides several ways to recover system functionality. The Driver Recovery and Operating System discs enable you to recover or repair your tablet PC without losing personal data. The Operating System disc also allows you to reinstall the operating system software provided with the tablet PC.✎For best results, attempt to recover optimal tablet PC functionality by using the following procedures in the order described here.

13–6 Hardware and Software GuideSoftware Update and RecoveriesDRAFT Revised: 8/24/04File: Chap13.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmSafeguarding Your DataSoftware or devices added to the tablet PC can cause your system to become unstable. To safeguard your documents, store personal files in the My Documents folder and periodically create a backup copy of My Documents.Setting System Restore PointsTablet PCs with Windows XP operating systems provide the option of setting system restore points (benchmarks) daily as you change your personal settings. The tablet PC may also set restore points when you add new software or devices. You should periodically set system restore points when the tablet PC is functioning at optimal performance and before installing new software or devices. This enables you to return to a previous configuration restore point if you encounter problems.To set a system restore point:1. Select Start > Help and Support. Select the task “Use Tools to view your computer information and diagnose problems.” Select System Restore. A System Restore window opens.2. Follow the on-screen directions for setting a restore point.To restore the tablet PC to a previous date and time when it was functioning optimally:1. Select Start > Help and Support > Tools > System Restore.2. Follow the on-screen directions for restoring the tablet PC.

Software Update and RecoveriesHardware and Software Guide 13–7DRAFT Revised: 8/24/04File: Chap13.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmRepairing the Operating SystemTo attempt an operating system repair without deleting your personal data, use the Operating System disc that was shipped with the tablet PC:1. Connect the tablet PC to external power and turn on the tablet PC.2. Immediately insert the Operating System disc into the tablet PC.3. Press and hold the power button for 5 seconds to turn off the tablet PC.4. Press the power button again to start the tablet PC.5. When prompted, press any key to boot from the disc. After a few minutes, the Welcome to Setup screen is displayed.6. Press enter to continue. A Licensing Agreement screen is displayed.7. Press f8 to accept the agreement and continue. The Setup window is displayed.8. Press R to repair the selected Windows installation. The repair process begins. This process may take up to 2 hours to complete. The tablet PC restarts in Windows after the process is complete.Reinstalling the Operating SystemÄCAUTION: Personal data and software you have installed on the tablet PC will be lost during the operating system reinstall. To protect your data, back up your data before reinstalling your operating system. Refer to the Windows online help utility to learn more about backing up your files.If other recovery efforts do not successfully repair the tablet PC, you can reinstall the operating system.

13–8 Hardware and Software GuideSoftware Update and RecoveriesDRAFT Revised: 8/24/04File: Chap13.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmTo reinstall the operating system:1. Connect the tablet PC to external power and turn on the tablet PC.2. Immediately insert the Operating System disc into the tablet PC.3. Press and hold the power button for 5 seconds to turn off the tablet PC.4. Press the power button again to start the tablet PC.5. When prompted, press any key to boot from the disc. After a few minutes, the Welcome to Setup screen is displayed.6. Press enter to continue. A Licensing Agreement screen is displayed.7. Press f8 to accept the agreement and continue. The Setup window is displayed.8. Press esc to continue installing a new copy of the operating system instead of repairing it.9. Press enter to set up the operating system.10. Press C to continue setup using this partition.11. Select Format the partition using the NTFS file system (Quick) and press enter.ÄCAUTION: Formatting this drive will delete all current files.12. Press F to format the drive. The reinstallation process begins. This process may take up to 2 hours to complete. The tablet PC restarts in Windows when the process is complete.✎When prompted for the product key, refer to the Microsoft Certificate of Authenticity label located on the bottom of the tablet PC.

$Software Update and RecoveriesHardware and Software Guide 13–9DRAFT Revised: 8/24/04File: Chap13.fm PN: HP-367186-001 hp CONFIDENTIALAugust 24, 2004 4:02 pmReinstalling Device Drivers and Other SoftwareAfter the operating system installation process is complete, you must reinstall drivers. To reinstall drivers, use the Driver Recovery disc included with the tablet PC:1. While running Windows, insert the Driver Recovery disc into the optical drive.If you do not have Autorun enabled, select Start > Run.Then type D:\SWSETUP\APPINSTL\SETUP.EXE (where D indicates the optical drive).2. Follow the on-screen instructions for installing the drivers.After the drivers are reinstalled, you must reinstall any software you added to the tablet PC. Follow the installation instructions provided with the software.$