Broadcom BRCM1013 802.11g Mini-PCI Card User Manual Startup Guide

Broadcom Corporation 802.11g Mini-PCI Card Startup Guide

HP Start up Guide

Startup GuideHP Notebook SeriesDocument Part Number: 370699-001June 2004This guide explains how to set up your notebook and begin using it. It also provides battery pack, power management, and troubleshooting information.HP_SU_370699-001.book Page i Thursday, May 13, 2004 4:39 PM
© Copyright 2004 Hewlett-Packard Development Company, L.P.Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks of Adobe Systems Incorporated.The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.Startup GuideHP Notebook SeriesFirst Edition June 2004Reference Number: ze4900/nx9020/nx9030/nx9040Document Part Number: 370699-001HP_SU_370699-001.book Page ii Thursday, May 13, 2004 4:39 PM
Startup Guide iiiContents1 Getting Started with Your NotebookImportant Safety Information. . . . . . . . . . . . . . . . . . . . . . 1–1Identifying Parts of the Notebook . . . . . . . . . . . . . . . . . . 1–2Front Panel and Right Panel Components . . . . . . . . 1–3Left Panel and Back Panel Components . . . . . . . . . . 1–4Bottom Panel Components . . . . . . . . . . . . . . . . . . . . 1–5Status Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–6Setting Up Your Notebook. . . . . . . . . . . . . . . . . . . . . . . . 1–8Step 1: Insert the Battery Pack . . . . . . . . . . . . . . . . . 1–8Step 2: Connect AC Power . . . . . . . . . . . . . . . . . . . . 1–9Step 3: Connect a Phone Line . . . . . . . . . . . . . . . . . 1–10Step 4: Turn On the Notebook. . . . . . . . . . . . . . . . . 1–11Step 5: Set Up Windows . . . . . . . . . . . . . . . . . . . . . 1–12Using the Documentation CD . . . . . . . . . . . . . . . . . . . . 1–122Basic OperationOperating Your Notebook . . . . . . . . . . . . . . . . . . . . . . . . 2–1Default Power Settings . . . . . . . . . . . . . . . . . . . . . . . 2–2To Reset the Notebook . . . . . . . . . . . . . . . . . . . . . . . 2–3To Change the Boot Device. . . . . . . . . . . . . . . . . . . . 2–3To Use the TouchPad . . . . . . . . . . . . . . . . . . . . . . . . 2–4To Use the Tap to Click Function of the TouchPad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5To Use the Function Hot Keys . . . . . . . . . . . . . . . . . 2–6Using CDs or DVDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–7To Play DVD Movies . . . . . . . . . . . . . . . . . . . . . . . . 2–7HP_SU_370699-001.book Page iii Thursday, May 13, 2004 4:39 PM
iv Startup GuideContentsTo Write to DVD Media (Select Models Only) . . . . 2–7To Connect a TV to Your Notebook (Select Models Only). . . . . . . . . . . . . . . . . . . . . . . . . 2–8To Connect an Infrared Device (Select ModelsOnly) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–83 Battery Packs and Power ManagementUsing Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1To Check Battery Status . . . . . . . . . . . . . . . . . . . . . . 3–1To Respond to a Low-Battery Warning . . . . . . . . . . 3–2To Recharge the Battery Pack . . . . . . . . . . . . . . . . . . 3–3To Get the Most from Your Battery Packs . . . . . . . . 3–3Disposing of a Used Battery Pack . . . . . . . . . . . . . . . . . . 3–54TroubleshootingTroubleshooting Your Notebook . . . . . . . . . . . . . . . . . . . 4–1Display Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2Hard Drive Problems. . . . . . . . . . . . . . . . . . . . . . . . . 4–3Keyboard and Pointing Device Problems . . . . . . . . . 4–3Power and Battery Pack Problems. . . . . . . . . . . . . . . 4–5Startup Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6Configuring Your Notebook . . . . . . . . . . . . . . . . . . . . . . 4–7To Run the BIOS Setup Utility . . . . . . . . . . . . . . . . . 4–7Updating Software and Drivers from the Web . . . . . . . . 4–8Using System Recovery Features. . . . . . . . . . . . . . . . . . . 4–8Safeguarding Your Data . . . . . . . . . . . . . . . . . . . . . . 4–9Operating System (OS) CD Repair . . . . . . . . . . . . . 4–10OS CD Reinstall . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–11Reinstalling Drivers. . . . . . . . . . . . . . . . . . . . . . . . . 4–12Restoring Software Applications. . . . . . . . . . . . . . . 4–12IndexHP_SU_370699-001.book Page iv Thursday, May 13, 2004 4:39 PM
Startup Guide 1–11Getting Started withYour NotebookImportant Safety InformationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. For more information, refer to the Regulatory and Safety Notices on the Documentation CD provided with your product.ÅWARNING: To reduce the risk of electric shock or damage to your equipment:■Plug the power cord into an electrical outlet that is easily accessible at all times.■Disconnect power from the product by unplugging the power cord from the electrical outlet.■If provided with a three-conductor power cord having a three-pin attachment plug, plug the cord into a grounded (earthed) outlet. Do not disable the power cord grounding pin. The grounding pin is an important safety feature.ÅWARNING: To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the hard drive or on the Documentation CD that is included with the product.HP_SU_370699-001.book Page 1 Thursday, May 13, 2004 4:39 PM
1–2 Startup GuideGetting Started with Your NotebookÄCAUTION: To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord to connect a modem to the telephone wall jack. In Australia, the notebook must be connected to the Telecommunication Network through a line cord that meets the requirements of ACA Technical Standard TS008.When using your notebook with a telephone connection, always follow basic safety precautions to reduce the risk of fire, electrical shock, and injury to persons. ■Do not use this product with a telephone connection near water (for example, near a bathtub, sink, swimming pool, or in a wet basement).■Avoid using a telephone connection (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.■Do not use a telephone connection to report a gas leak in the vicinity of the leak.■Use only the power cord and battery packs indicated in this guide. Do not dispose of battery packs in a fire. They may explode. Check with local codes for possible special disposal instructions.■Disconnect the modem cable before opening the notebook case or touching an uninsulated modem cable, jack, or internal component.■Do not plug a modem cable or telephone cable into the network (LAN) receptacle.Identifying Parts of the NotebookComponents included with the notebook may vary by geographical region and the features you selected. The following tables identify the standard external components included with most notebook models.Find the illustrations that closely match your notebook to identify your components.HP_SU_370699-001.book Page 2 Thursday, May 13, 2004 4:39 PM
Getting Started with Your NotebookStartup Guide 1–3Front Panel and Right Panel Components 1Main status lights (left to right): power mode, hard drive activity, and battery 7CD-ROM, DVD, or other drive2TouchPad, scroll pad, Click buttons, and an on-off button8Battery pack3Power button: turns the notebook on and off 9Wireless on-off button and indicator light (select models only)4Keyboard status lights -Infrared port (select models only)5One-Touch buttons qHard drive6Notebook open/close latchHP_SU_370699-001.book Page 3 Thursday, May 13, 2004 4:39 PM
1–4 Startup GuideGetting Started with Your NotebookLeft Panel and Back Panel Components 1AC adapter jack 9RJ-11 jack: connects the modem cable2Universal serial bus (USB) ports -PC Card and CardBus slot and button (select models only; location varies by model)3RJ-45 jack: connects a network cable qIEEE 1394 port (select models only)4S-Video out jack (select models only) wAudio jacks (left to right): external microphone, audio out (headphones)5Parallel port (LPT1): use this port for a parallel printer or other parallel device (select models only)eVolume control6Serial port (COM1): use this port for a serial mouse, modem, printer, or other serial device (select models only)rAudio mute button and audio mute light7External monitor port tDiskette drive (select models only)8Cable lock slot (security connector)HP_SU_370699-001.book Page 4 Thursday, May 13, 2004 4:39 PM
Getting Started with Your NotebookStartup Guide 1–5Bottom Panel Components ÄCAUTION: To prevent an unresponsive system and the display of a warning message, install only a Mini PCI device authorized for use in your notebook by the governmental agency that regulates wireless devices in your country. If you install a device and then receive a warning message, remove the device to restore notebook functionality. Then contact Customer Care.1Hard drive 4Reset button2Battery latch 5Mini PCI cover (no user parts inside)3RAM (memory) coverHP_SU_370699-001.book Page 5 Thursday, May 13, 2004 4:39 PM
1–6 Startup GuideGetting Started with Your NotebookStatus LightsThe notebook includes a number of status lights that report power and battery status, drive activity, and keyboard functions such as Caps Lock and Num Lock.The following diagram shows the main status lights on the front of the notebook.1Power mode ■On—notebook is on (even if the display is off)■Blinking—notebook is in Standby■Off—notebook is off or in Hibernation2Hard drive activityOn—notebook is accessing the hard drive3Battery status■Green—AC adapter is connected and the battery pack is fully charged■Amber—AC adapter is connected and the battery pack is charging■Blinking—AC adapter is connected and the battery pack is missing or has a fault■Off—AC adapter is not connectedHP_SU_370699-001.book Page 6 Thursday, May 13, 2004 4:39 PM
Getting Started with Your NotebookStartup Guide 1–7The keyboard status lights, located above the keyboard, indicate the states of the keyboard locks.1Caps Lock On: Caps Lock is active.2Num Lock On: Num Lock is active. (The Keypad Lock must also be on to use the embedded keypad.)3Keypad Lock On: The embedded keypad is active (Fn+F8). Num Lock must also be on for the numeric keys. Otherwise, cursor control is active (as marked on an external keyboard).HP_SU_370699-001.book Page 7 Thursday, May 13, 2004 4:39 PM
1–8 Startup GuideGetting Started with Your NotebookSetting Up Your NotebookÅWARNING: To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the hard drive or on the Documentation CD that is included with the product.When you set up your notebook for the first time, you will connect the AC adapter, charge the battery pack, turn on the notebook, and run the Microsoft® Windows® Setup program.Step 1: Insert the Battery PackÅWARNING: Do not mutilate or puncture battery packs. Do not dispose of battery packs in fire, or they can burst or explode, releasing hazardous chemicals. Rechargeable battery packs must be recycled or disposed of properly.To install the battery pack:1. Turn the notebook upside down.2. Insert the connector end of the battery pack into the battery pack compartment, then slide the battery pack in until it latches. HP_SU_370699-001.book Page 8 Thursday, May 13, 2004 4:39 PM
Getting Started with Your NotebookStartup Guide 1–9Step 2: Connect AC Power ÄCAUTION: Use only the AC adapter included with your notebook (or other approved adapter that meets the power requirements of the notebook). Using the wrong AC adapter could damage the notebook or adapter, cause data loss, and may void your warranty.1. Plug the AC adapter into the notebook.2. Connect the power cord to the AC adapter.3. Plug the power cord into a wall outlet. The notebook battery starts charging.✎When unplugging the power cord, unplug it from the outlet before unplugging it from the AC adapter.While the battery pack is charging, you can continue with the section “Step 3: Connect a Phone Line.”HP_SU_370699-001.book Page 9 Thursday, May 13, 2004 4:39 PM
1–10 Startup GuideGetting Started with Your NotebookStep 3: Connect a Phone Line1. Make sure the telephone line is an analog line, sometimes called a data line. (Do not use a digital line.)2. Connect the telephone cord (RJ-11) into a telephone jack.3. Plug the other end of the telephone cord into the RJ-11 modem jack on the notebook.For details about using the modem, including AT commands, see the Documentation CD included with your notebook.HP_SU_370699-001.book Page 10 Thursday, May 13, 2004 4:39 PM
Getting Started with Your NotebookStartup Guide 1–11Step 4: Turn On the NotebookPress the power button above the left side of the keyboard. The notebook boots up, and Windows starts automatically.✎If your notebook does not turn on when operating on battery power, the battery pack may be out of power. Plug in the AC adapter, then press the power button again. Leave the AC adapter plugged in for several hours to fully charge the battery pack. Charge times will vary.ÅWARNING: This notebook is designed to run demanding applications at full power. As a result of increased power consumption, it is normal for the notebook to feel warm or hot when used continuously. To avoid potential discomfort or burns, do not block the air vents or use the notebook on your lap for extended periods. The notebook complies with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950).HP_SU_370699-001.book Page 11 Thursday, May 13, 2004 4:39 PM
1–12 Startup GuideGetting Started with Your NotebookStep 5: Set Up WindowsYour notebook has the Microsoft Windows operating system preinstalled on its hard drive. The first time you turn on your notebook, the Windows Setup program runs automatically and includes opportunities to customize your setup.1. Follow the Setup program instructions on the screen. If the program prompts you to enter the Product ID code, locate the code on the bottom of the notebook.2. Check the modem country or region settings. Select Start > Control Panel > Printers and Other Hardware > Phone and Modem Options, then choose your country/region.Using the Documentation CDInformation about using the notebook can be found on the Documentation CD included with the notebook. To view a guide:1. Insert the Documentation CD into a CD or DVD drive. If autorun is enabled, the reference library menu is displayed on the screen (this may take a few seconds).2. Select the guide you want to read from the reference library menu.3. If prompted, accept the Adobe® Acrobat® Reader license agreement or install Acrobat Reader by following the instructions on the screen.HP_SU_370699-001.book Page 12 Thursday, May 13, 2004 4:39 PM
Startup Guide 2–12Basic OperationOperating Your NotebookYou can start and stop your notebook by using the power button. At other times, power considerations, types of active connections, and startup time may cause you to use alternative methods to start or stop your notebook. This chapter describes several methods.HP_SU_370699-001.book Page 1 Thursday, May 13, 2004 4:39 PM
2–2 Startup GuideBasic OperationDefault Power SettingsYou can also customize how these power modes work. See the “Battery Packs and Power Management” chapter in the Reference Guide on the Documentation CD included with your notebook.Power mode To enter this mode FunctionON—Power status light will turn on. Briefly press the power button. Powers on the notebook.OFF—Power status light will turn off. Select Start > Turn Off Computer > Turn Off. If the system has stopped responding and Windows shutdown procedures cannot be used, press and hold the power button for 4 seconds to turn off the notebook.Powers off the notebook.Standby—Power status light will blink. Select Start > Turn Off Computer > Stand By.-or-Allow the system to time out. ■Saves significant power.■Turns off the display and other components.■Maintains current session in RAM.■Restarts quickly.■Restores network connections.Hibernation—Power status light will turn off.If the notebook is already on, briefly press the power button.-or-Press Fn+F12. -or-Allow the system to time out.■Saves maximum power.■Saves current session to disk, then shuts down.■Restores network connections.HP_SU_370699-001.book Page 2 Thursday, May 13, 2004 4:39 PM
Basic OperationStartup Guide 2–3To Reset the NotebookOccasionally, you may find that Windows or the notebook has stopped responding and will not let you turn off the notebook. If this happens, try the following procedures in this order:■If possible, shut down Windows. Press ctrl+alt+del, then select Shut Down > Restart.-or- ■Press the power button for at least 4 seconds until the display shuts down. Unsaved data will be lost. Press the power button again to restart.-or- ■Insert the tip of a paper clip into the reset button on the bottom of the notebook, then press the power button to restart.To Change the Boot DeviceThe notebook normally boots from its internal hard drive. You can also boot the notebook from a diskette drive, a CD-ROM drive, or an internal network interface card.1. Select Start > Turn Off Computer > Restart.2. When the logo screen appears, press esc to display the Boot menu. 3. Use the arrow keys to select the boot device, then press enter.If you want to boot from a specific device whenever it is present, change the boot order using the BIOS Setup utility. See “Configuring Your Notebook” in the “Troubleshooting” chapter in this guide.HP_SU_370699-001.book Page 3 Thursday, May 13, 2004 4:39 PM
2–4 Startup GuideBasic OperationTo Use the TouchPadThe TouchPad includes an on-off button so you can turn off the TouchPad to avoid moving the pointer accidentally when you are typing. The indicator light turns off when you turn off the TouchPad.1Click buttons. The Click buttons work like the left and right buttons on a standard mouse2TouchPad (touch-sensitive pointing device).3TouchPad on-off button and indicator light.4Scroll pad. The scroll pad scrolls vertically to display the contents of the active window.HP_SU_370699-001.book Page 4 Thursday, May 13, 2004 4:39 PM
Basic OperationStartup Guide 2–5To Use the Tap to Click Function of the TouchPadThe Tap to Click function of your TouchPad is enabled by default. To disable it, follow the instructions included here:1. Select Start > Control Panel > Printers and Other Hardware > Mouse. The Mouse Properties dialog box opens.2. Select the Tapping tab.3. In the left panel, clear the Tapping check box. 4. Select Apply > OK.The Tap to Click function is now disabled.HP_SU_370699-001.book Page 5 Thursday, May 13, 2004 4:39 PM
2–6 Startup GuideBasic OperationTo Use the Function Hot KeysThe combination of the Fn key plus another key creates a hot key—a shortcut key sequence—for various system controls. To use a hot key, press and hold Fn, press the appropriate second key, then release both keys. This hot key Does thisFn+F1 Decreases the display brightness.Fn+F2 Increases the display brightness.Fn+F5 Toggles the external monitor on and off.Fn+F8 Toggles the built-in keypad on and off. Does not affect an external keyboard. If Num Lock is on, then the numeric functions are active; otherwise, cursor control is active (as marked on an external keyboard).Fn+F12 Initiates Hibernation.Fn+NumLock Toggles Scroll Lock on and off.Fn+Page Up Increases the audio volume and cancels the mute setting.Fn+Page Down Decreases the audio volume.Fn+Backspace Mutes/unmutes the audio output.FnHP_SU_370699-001.book Page 6 Thursday, May 13, 2004 4:39 PM
Basic OperationStartup Guide 2–7Using CDs or DVDsTo Play DVD MoviesIf your notebook is equipped with a DVD or other DVD readable drive, it also includes DVD player software that lets you play DVD movies.✎DVDs can have regional codes embedded in the disc data. These codes prevent DVD movies from being played outside the region of the world in which they are sold. If you get a region code error, you are trying to play a DVD intended for a different region.Most DVD drives let you change the region code only a limited number of times (usually no more than 4). When you reach this limit, your last change to the region code will be hard-coded on the DVD drive and will be permanent. Your warranty does not cover the expense of correcting this situation. Refer to the Help for your DVD player software for details about setting region codes.To Write to DVD Media (Select Models Only)If your notebook is equipped with a DVD+RW/R and CD-RW Combo Drive, you must install your DVD burning software from the CDs included with your notebook before you can write to DVD media.When writing to DVD+R or DVD+RW media, observe the following guidelines:■Place the notebook on a flat, stable surface.■Ensure that the AC adapter is connected to the notebook and an AC electrical outlet.■Close and exit all other software applications, except the CD burning software (when writing a data disc) or DVD burning software (when writing a video disc).HP_SU_370699-001.book Page 7 Thursday, May 13, 2004 4:39 PM
2–8 Startup GuideBasic OperationTo Connect a TV to Your Notebook (Select Models Only)You can use a TV as an external monitor for your notebook. To connect a TV to your notebook:1. Plug a standard 4-pin S-Video cable to the S-Video out jack on your notebook (yellow connector on the back panel). Plug the other end of the cable to the S-Video in jack on your television. ✎Although your notebook has a 7-pin S-Video out jack, the notebook accepts either a 7-pin or 4-pin cable connection.2. Select Start > Control Panel > Appearance and Themes > Display. Then, select Settings tab > Advanced button > Display tab.3. To enable the TV, select the red button next to TV.✎If the S-Video cable is not plugged into your notebook and TV, the red button will not be displayed.4. Select Apply to accept the changes.5. If you are prompted to restart Windows, select Yes.To Connect an Infrared Device (Select Models Only)✎Select models include an infrared port. By default, the infrared port is enabled, so you must first enable it before you can use it.If your model has an infrared port (a small, rectangular lens located on the front of the notebook), then your notebook can communicate wirelessly with other infrared devices, such as printers or other notebooks, using this port.Basic Operation.fm Page 8 Thursday, May 27, 2004 12:34 PM
Basic OperationStartup Guide 2–9Using the Infrared Port■Make sure the infrared port of your notebook and the infrared port of the device with which you want to communicate lie in a straight line facing each other. The 2 ports should be no more than 3 feet (1 meter) apart with no obstructions in between. Noise from nearby equipment can cause transmission errors.1. Select Start > Control Panel > Performance and Maintenance > System.2. Select the Hardware tab > Device Manager button > ALI fast infrared controller > Enable Device button.3. Select Next > Finish > Close. Then close all open dialog boxes.■To check the status of communications, open Wireless Link by selecting Start > Control Panel > Printers & Other Hardware > Wireless Link.Printing to an Infrared PrinterInstall your printer and assign it to the notebook infrared port. You can then print from your applications or by following the directions for infrared ports.Transferring Files Through an Infrared ConnectionYou can use your notebook infrared port to transfer files by using Wireless Link. See the Windows online Help for instructions on using Wireless Link.HP_SU_370699-001.book Page 9 Thursday, May 13, 2004 4:39 PM
2–10 Startup GuideBasic OperationHP_SU_370699-001.book Page 10 Thursday, May 13, 2004 4:39 PM
Startup Guide 3–13Battery Packs and PowerManagementUsing Battery PowerFor information about how your notebook regulates power consumption and how you can manually reduce power consumption and extend the life of the notebook battery, see the “Battery Packs and Power Management” chapter in the Reference Guide on the Documentation CD included with your notebook.To Check Battery StatusFrom the battery status light»Check the battery status light on the notebook.From the Windows taskbarThe Windows taskbar can display a power icon that provides detailed battery status information (see Windows Help for details). The icon resembles a battery when a battery pack is the notebook’s sole source of power.■Place the pointer over the power icon to display the remaining battery charge. This value is shown as either a percentage of charge remaining or as time remaining.■Select the power icon to open the Battery Meter window.HP_SU_370699-001.book Page 1 Thursday, May 13, 2004 4:39 PM
3–2 Startup GuideBattery Packs and Power ManagementFrom the Windows Control Panel»Select Start > Control Panel > Performance and Maintenance > Power Options, then select the Power Meter tab to see the battery status. The Alarms and Advanced tabs provide additional power information options. On the battery pack1. Remove the battery pack from the notebook. See the “Getting Started with Your Notebook” chapter in this guide.2. Press the contact pad on the side of the battery pack. The number of lights that turn on indicates the remaining charge (each light represents 20 percent of a full charge).To Respond to a Low-Battery WarningThe notebook automatically alerts you when the battery power drops to a critically low level. The notebook first emits a high-pitched beep or displays a warning message. Then, if you do not restore power within a short time, the notebook goes into Hibernation.After the notebook enters Hibernation in this way, you will not be able to turn it on again until you restore power by doing one of the following procedures:■Replace the battery pack with a charged one.■Plug in the AC adapter.✎If you plug in the AC adapter, you can continue to work while your battery pack recharges.HP_SU_370699-001.book Page 2 Thursday, May 13, 2004 4:39 PM
Battery Packs and Power ManagementStartup Guide 3–3To Recharge the Battery PackÄCAUTION: The AC adapter is normally warm when plugged into an AC outlet. The notebook is normally warm while recharging. Do not recharge the notebook in a briefcase or other confined space, or the battery pack could overheat.»Plug the AC adapter into the notebook. Charging can take several hours. If you continue working while the battery pack charges, the charging time may increase.The operating time for a fully charged battery pack depends on the notebook model, power management settings, and level of use.To Get the Most from Your Battery PacksFollow these suggestions to make your battery power last as long as possible:■Plug in the AC adapter, especially when using a CD-ROM or DVD-ROM drive, or any external connections such as a PC Card or a modem.■Set the display brightness to the lowest comfortable level (Fn+F1). ■Put the notebook in Standby when you will not be using it for a short while. ■Put the notebook in Hibernation whenever you want to save your current session but will not be using the notebook for a day or more.■Set the automatic timeout settings to emphasize saving power. If your notebook has a multispeed processor, use the lower speed on battery power (the default settings conserve battery power). HP_SU_370699-001.book Page 3 Thursday, May 13, 2004 4:39 PM
3–4 Startup GuideBattery Packs and Power Management■If your notebook has a wireless on-off button, turn off the wireless function when you are not using it. Press the wireless on-off button to turn off the light.■If you have a PC Card, such as a network card, remove it when you are not using it. Some PC Cards use significant power even while they are inactive.■If you work with an application that uses the serial port or a PC Card, exit the application when you finish using it.In addition, follow these suggestions to extend the life of your battery packs:■Do not leave battery packs unused for long periods. If you have more than one, rotate them.■Unplug the AC adapter when the notebook is not in use.■If the notebook will be unused and unplugged for more than 2 weeks, remove and store the battery pack.ÄCAUTION: To prevent damage to the battery pack, do not expose it to high temperatures for extended periods of time.■High temperatures accelerate the self-discharge rate of a stored battery pack. To prolong the charge of a stored battery pack, place it in a cool, dry location.■To maintain the accuracy of battery charge displays, calibrate a battery pack that has been stored for one month or more before using it.■Avoid using or charging battery packs at high temperatures.HP_SU_370699-001.book Page 4 Thursday, May 13, 2004 4:39 PM
Battery Packs and Power ManagementStartup Guide 3–5Disposing of a Used Battery PackÅWARNING: There is a risk of fire and chemical burn if a battery pack is handled improperly. Do not disassemble, crush, or puncture a battery pack or short the contacts on a battery pack. Do not expose a battery pack to temperatures higher than 60°C (140°F) or dispose of a battery pack in water or fire.When a battery pack has reached the end of its useful life, do not dispose of it in general household waste.■In Europe, dispose of or recycle battery packs by using the public collection system or by returning them to HP, your service partner, or their agents.■In other regions, refer to the Worldwide Telephone Numbers booklet, included with the notebook, to contact HP and request information about battery pack disposal.For more information about battery pack precautions and disposal and the complete text of governmental agency notices, refer to the Regulatory and Safety Notices guide on the Documentation CD.HP_SU_370699-001.book Page 5 Thursday, May 13, 2004 4:39 PM
3–6 Startup GuideBattery Packs and Power ManagementHP_SU_370699-001.book Page 6 Thursday, May 13, 2004 4:39 PM
Startup Guide 4–14TroubleshootingTroubleshooting Your NotebookThis chapter contains solutions to many types of problems you might have with your notebook. Try the solutions one at a time, in the order in which they are presented.Here are some other sources of information for troubleshooting:■For a more complete list of troubleshooting suggestions, see the “Troubleshooting” chapter in the Reference Guide on the Documentation CD included with your notebook.■Use the Windows troubleshooters. Select Start > Help and Support.■Select the question mark One-Touch key located at the top of the keyboard.■See the Microsoft Windows manual shipped with the notebook.■Refer to the Worldwide Telephone Numbers booklet to contact a Customer Care Center for help and support.HP_SU_370699-001.book Page 1 Thursday, May 13, 2004 4:39 PM
4–2 Startup GuideTroubleshootingDisplay ProblemsIf the Notebook Is On, But the Screen Is Blank■Move the mouse or tap the TouchPad. This will wake the display if it is in Display-off mode. ■If the notebook is cold, allow it to warm up.If the Screen Is Difficult to Read■Try setting the display resolution to its default setting of 1024 × 768 or higher, depending on your model. Select Start > Control Panel > Appearance and Themes > Display.■Try adjusting the size of the desktop icons and labels.If an External Display Does Not Work■Check the connections.■The external monitor may not be detected. In the BIOS Setup utility, try setting Video Display Device to Both in the System Devices menu. ■If you are using a TV connected to the optional S-Video port, you must activate the TV.HP_SU_370699-001.book Page 2 Thursday, May 13, 2004 4:39 PM
TroubleshootingStartup Guide 4–3Hard Drive ProblemsIf the Notebook Hard Drive Does Not Spin■Make sure the notebook has power. If necessary, connect the AC adapter, and make sure it is fully plugged into a power source and into the back of the notebook.■Remove and reinsert the hard drive. If Files Are Corrupted■Open My Computer, and the disk you want to scan. Select File > Properties. Select the Check Now box under the Error-checking section of the Tools tab.■Run the virus-scanning program.■If necessary, you can format the hard disk and reinstall the original factory software using the system recovery features described in the “Troubleshooting” chapter of the Reference Guide.Keyboard and Pointing Device Problems✎Use these suggestions for built-in or external devices.If the Pointer Is Difficult to ControlAdjust the pointer controls. Select Start > Control Panel > Printers and Other Hardware > Mouse.HP_SU_370699-001.book Page 3 Thursday, May 13, 2004 4:39 PM
4–4 Startup GuideTroubleshootingIf the TouchPad Does Not Work■Press the TouchPad on-off button to turn on the light.■Do not touch the TouchPad while the notebook is rebooting or resuming from Standby mode. If this happens, try the following: press a key on the keyboard to restore normal operation.■If an external mouse is connected, the built-in pointing devices are normally disabled. You can change this setting with the BIOS Setup utility. See “Configuring Your Notebook” in this chapter.■Restart the notebook. Select Start > Turn Off Computer > Restart.If the Notebook Stops Responding■Press ctrl+alt+del and use Task Manager to end the application that is not responding.■Press the power button for at least 4 seconds to turn off and reset the notebook. Unsaved data will be lost. Then press the power button again to turn the notebook back on.■If nothing happens, insert the tip of a paper clip into the reset button on the bottom of the notebook. Then press the power button to turn the notebook back on.■To avoid lockup problems, avoid pressing the TV Now! One-Touch button to switch display devices while graphic-intensive applications are running. Also avoid turning the notebook off or putting it into Standby while such applications are running.HP_SU_370699-001.book Page 4 Thursday, May 13, 2004 4:39 PM
TroubleshootingStartup Guide 4–5Power and Battery Pack ProblemsIf the Notebook Turns Off Immediately After It Turns OnBattery power is probably extremely low. Plug in the AC adapter or insert a charged battery pack. If the Notebook Keeps BeepingThe notebook beeps repeatedly or displays a warning when battery power is low. Save your work, shut down Windows immediately, and insert a charged battery pack or plug in the AC adapter.If the Battery Pack Does Not Charge■Make sure the AC adapter is fully plugged into the power source and the notebook, and that the battery charging light on the notebook is on.■If you are using a power strip, remove the AC adapter from the power strip and plug it directly into a wall outlet.■Make sure the battery pack is fully installed and locked in place.■Make sure you are using only the AC adapter included with your notebook (or other approved adapter that meets the power requirements of the notebook). Do not use a 60-watt, 3.16-amp adapter.■Move the notebook away from any nearby heat source. Unplug the AC adapter and allow the battery pack to cool down. If the battery pack gets too hot, it will not charge properly.■If available, try another battery pack and AC adapter.HP_SU_370699-001.book Page 5 Thursday, May 13, 2004 4:39 PM
4–6 Startup GuideTroubleshootingStartup ProblemsIf the Notebook Does Not Respond When You Turn It On■Connect the AC adapter. ■Reset the notebook by inserting the tip of a paper clip into the reset button on the bottom of the notebook. Then press the power button to turn it on.■If the notebook still does not respond, remove the battery pack and AC adapter, remove any PC Cards, and undock the notebook if docked. Then plug in the AC adapter again, and reset the notebook using the reset button.If the Notebook Will Not Boot from Battery Power■Make sure the battery pack is properly inserted and fully charged. Check the battery charge by removing it and pressing the pad on the side of the battery pack. The lights show the charge level.■If available, try another battery pack.HP_SU_370699-001.book Page 6 Thursday, May 13, 2004 4:39 PM
TroubleshootingStartup Guide 4–7Configuring Your NotebookThe BIOS Setup utility helps you configure your notebook operation.To Run the BIOS Setup UtilityThe BIOS (basic input and output system) Setup utility enables you to make changes to the notebook system configuration, and to tailor the operation of your notebook to your individual work needs.The settings made in BIOS Setup generally control the notebook hardware, and so greatly affect how the notebook operates. 1. Select Start > Turn Off Computer > Restart.2. When the logo screen appears, press F2 to enter BIOS Setup.3. The pointing devices are not active in BIOS Setup, so you will need to use the keyboard to navigate:❏Press the left and right arrow keys to move among menus.❏Press the up and down arrow keys to move among parameters in a menu.❏Press + or - to move through values for the current parameter, or press enter to change a setting.4. After you select the options you want, press F10 or use the Exit menu to exit BIOS Setup.5. If the settings cause a conflict between devices during reboot, the system prompts you to run BIOS Setup, and marks the conflicting settings. HP_SU_370699-001.book Page 7 Thursday, May 13, 2004 4:39 PM
4–8 Startup GuideTroubleshootingUpdating Software and Drivers from the WebSoftware and driver updates for your notebook are available for download. For more information, visit the Web site at http://www.hp.com/support.Using System Recovery FeaturesThe notebook system recovery process provides several options for recovering optimal system functionality. System Restore and OS CDs (operating system CDs) enable you to recover or repair your notebook without losing personal data. The OS CD also enables reinstallation of the operating system software provided with the notebook. For detailed information, see the “Troubleshooting” chapter in the Reference Guide.HP_SU_370699-001.book Page 8 Thursday, May 13, 2004 4:39 PM
TroubleshootingStartup Guide 4–9Safeguarding Your DataSoftware or devices added to the notebook can cause your system to become unstable. To safeguard your documents, store personal files in the My Documents folder and periodically create a backup copy of My Documents. Setting System Restore points is also recommended.Your notebook sets System Restore points (benchmarks) daily as you change your personal settings. The notebook may also set restore points when you add new software or devices. You should periodically set personal restore points when the notebook is functioning at optimal performance and before installing new software or devices. This enables you to return to a previous configuration restore point if you encounter problems.To set a system restore point:1. Select Start > Help & Support. Select the task Use Tools to view your computer information and diagnose problems. Select System Restore. A System Restore window opens.2. Follow the on-screen directions for setting a restore point.To restore the notebook to a previous date and time when it was functioning optimally:1. Select Start > Help & Support > Tools > System Restore.2. Follow the on-screen directions for restoring the notebook. HP_SU_370699-001.book Page 9 Thursday, May 13, 2004 4:39 PM
4–10 Startup GuideTroubleshootingOperating System (OS) CD RepairTo repair the operating system without deleting your personal data, use the standard Microsoft OS CD that was shipped with the notebook. This CD contains the following preinstalled operating systems:■Microsoft Windows XP Home or Pro (depending on configuration)■Appropriate service packTo repair the operating system:1. Connect the notebook to external power and turn on the notebook.2. Immediately insert the OS CD into the notebook.3. Press and hold the power button for 5 seconds to turn off the notebook.4. Press the power button again to start the notebook.5. When prompted, press any key to boot from CD. After a few minutes, the Welcome to Setup screen is displayed.6. Press enter to continue. A Licensing Agreement screen is displayed.7. Press F8 to accept the agreement and continue. The Setup window opens.8. Press R to repair the selected Windows installation. The repair process begins. This process takes 1 to 2 hours to complete. The notebook restarts in Windows after the process is complete.HP_SU_370699-001.book Page 10 Thursday, May 13, 2004 4:39 PM
TroubleshootingStartup Guide 4–11OS CD ReinstallIf other recovery efforts do not successfully repair the notebook, you can reinstall the operating system. ÅWARNING: Personal data and software you have installed on the notebook will be lost during the OS CD reinstall. To protect your data, make a backup copy of My Documents before reinstalling your operating system. Visit Help and Support to learn more about backing up your files.To reinstall the operating system:1. Connect the notebook to external power and turn on the notebook.2. Immediately insert the OS CD into the notebook.3. Press and hold the power button for 5 seconds to turn off the notebook.4. Press the power button again to start the notebook.5. When prompted, press any key to boot from the CD. After a few minutes, the Welcome to Setup screen opens.6. Press enter to continue. A Licensing Agreement screen is displayed.7. Press F8 to accept the agreement and continue. The Setup window is displayed.8. Press esc to continue installing a fresh copy of the operating system without repairing.9. Press enter to set up the operating system.10. Press C to continue setup using this partition.HP_SU_370699-001.book Page 11 Thursday, May 13, 2004 4:39 PM
4–12 Startup GuideTroubleshooting11. Select Format the partition using the NTFS file system (Quick) and press enter. A caution is displayed that formatting this drive will delete all current files.12. Press F to format the drive. The reinstallation process begins. This process takes 1 to 2 hours to complete. The notebook restarts in Windows after the process is complete.✎When prompted for the product key, refer to the Microsoft Certificate of Authenticity located on the bottom of the notebook.Reinstalling DriversAfter the OS installation process is complete, you must reinstall drivers. Use the Driver Recovery CD with the OS CD for hardware driver and system utility refresh and for full system software restoration.To reinstall drivers:1. While running Windows, insert the Driver Recovery CD into the optical drive.2. If you do not have Autorun enabled, select Start > Run. Then type D:\SWSETUP\APPINSTL\SETUP.EXE (where D indicates the optical drive).3. Select the desired driver(s) or system utility from the Driver Recovery CD menu.4. Select Next to complete the installation.Restoring Software ApplicationsAfter the drivers are reinstalled, you must reinstall any software you added to the notebook. Use the Application Recovery and third-party CDs to reinstall or continue restoring software applications. Follow the installation instructions provided with the software CDs included with the notebook.HP_SU_370699-001.book Page 12 Thursday, May 13, 2004 4:39 PM
Startup Guide Index–1Index1394 port location 1–4AAC adapterconnecting 1–9jack location 1–4Acrobat Reader 1–12adjustingbrightness 2–6volume 2–6audioadjusting volume 2–6jack location 1–4mute button 1–4volume control location 1–4Bback panel components 1–4battery packschecking battery status 1–6, 3–1disposal and recycling 3–5disposing of 3–5extending life of 3–3installing 1–8location 1–3low-battery warning 3–2recharging 3–3release latch 1–5status lights 1–6troubleshooting 4–5battery powercheck status 3–1low-battery warning 3–2battery status lights 3–1BIOS Setup Utility 4–7bottom panel components 1–5brightness, adjusting 2–6buttonsClick 1–3One-Touch 1–3on-off (on TouchPad) 1–3power 1–3, 1–11reset 1–5wireless on-off 1–3Ccable lock slot 1–4CD-ROM drive location 1–3changing the boot device 2–3Click buttons 1–3componentsback panel 1–4bottom panel 1–5front panel 1–3keyboard status lights 1–3left panel 1–4HP_SU_370699-001.book Page 1 Thursday, May 13, 2004 4:39 PM
Index–2 Startup GuideIndexright panel 1–3status lights 1–2configuring the notebook 4–7connectingAC power 1–9infrared device 2–8phone line 1–10TV (as an external monitor) 2–8connectorsaudio 1–4RJ-11 (modem) 1–4RJ-45 (network) 1–4security 1–4S-Video out 1–4Ddecreasing display brightness 2–6diskette drive location 1–4displayadjusting brightness 2–6troubleshooting 4–2Documentation Library CD 1–12driversreinstalling 4–12DVD drivecreating data disc 2–7creating movie disc 2–7location 1–3playing movies 2–7setting region code 2–7Eexternal monitorconnecting 2–8port location 1–4Ffront panel components 1–3function hot keys 2–6Hhard driveactivity status light 1–6location 1–3, 1–5troubleshooting 4–3Hibernation mode 2–2hot keys 2–6Iidentifying components 1–2increasing display brightness 2–6infrared portconnecting a device 2–8location 1–3printing 2–9transferring files 2–9using the port 2–9inserting the battery pack 1–8Kkeyboardstatus lights 1–3, 1–7troubleshooting 4–3keys 2–6Lleft panel components 1–4low-battery warning 3–2Mmini PCI cover 1–5Nnetwork jack, location 1–4HP_SU_370699-001.book Page 2 Thursday, May 13, 2004 4:39 PM
IndexStartup Guide Index–3OOne-Touch buttons 1–3on-off button 1–3open/close latch 1–3Operating System CDreinstall 4–11repair 4–10Pparallel port (LPT1) 1–4parts of the notebookback panel 1–4bottom panel 1–5front panel 1–3left panel 1–4right panel 1–3status lights 1–6PC Card slot location 1–4ports1394 1–4external monitor 1–4infrared 1–3LPT1 (parallel) 1–4serial port (COM1) 1–4USB 1–4powerbutton 1–3, 1–11mode status light 1–6settings 2–2troubleshooting 4–5RRAM cover 1–5recharging the battery pack 3–3reinstallingoperating system 4–11software 4–12reinstalling software 4–8repairing the operating system 4–10reset buttonlocation 1–5using 2–3restoring software 4–12right panel components 1–3RJ-11 (modem) jackconnecting 1–10location 1–4RJ-45 (network) jack 1–4Ssafeguarding data 4–9safety information 1–1scroll pad, location 1–3serial port (COM1) 1–4setting up the notebookconnect phone line 1–10connect power 1–9install battery pack 1–8power on 1–11set up Windows 1–12troubleshooting 4–6setup utility 4–7slot locationcable lock 1–4PC Card and CardBus 1–4software, restoring 4–12software, updating 4–8Standby mode 2–2status lightsbattery charge 1–6hard drive 1–6keyboard 1–3, 1–7HP_SU_370699-001.book Page 3 Thursday, May 13, 2004 4:39 PM
Index–4 Startup GuideIndexlocation 1–3main 1–3, 1–6meanings 1–6wireless indicator 1–3S-Video out jacklocation 1–4using 2–8system recovery 4–8Ttelephone line connection 1–101394 port location 1–4toggling built-in keypad 2–6TouchPad 1–3, 2–4functions 2–5transferring files 2–9troubleshootingbattery packs 4–5display 4–2hard drive 4–3keyboard 4–3power 4–5startup 4–6turning off the notebook 2–2turning on the notebook 1–11, 2–2Uupdating software 4–8USB port location 1–4using BIOS Setup Utility 4–7Vvolume control 1–4Wwirelessindicator light 1–3on-off button 1–3HP_SU_370699-001.book Page 4 Thursday, May 13, 2004 4:39 PM

Navigation menu