Brightstar MB9505 4G Smart Phone User Manual

Brightstar Corporation 4G Smart Phone

User Manual

User ManualModel :B9505
1. Caution:1) Do not drop、hit or place heavy objects on the touch screen.2) Avoid placing any heavy objects on the mobile phone.3) Do not use the mobile phone in areas near water, take special care during rain, snow,on the beach, or near the shore. Exposing the mobile phone to these conditions maycause damage to it.Accessories:1) DC+5V Adaptor *12) USB Cable*13) Rechargeable battery *14) Earphone *15) User manual *1
1. Earphones Jack2. Proximity sensor3. Receiver4. Front Camera5. Go to the sub-Menu (if available) of current menu.6. Go to the home screen7. Go back a screen8. USB Port (for charging and connecting to computer)9. Rear Camera10. Flash11. Volume+ Control Key12. Volume- Control Key13. Power On/Off14. Speaker
2. Feature:5.0 inch Touch Screen 854*480TNCPU: MTK6737M 1.5GhzOperation System: Android 7.0Network: 802.11 b/g/nRAM:1GB + ROM:8GBSIM 1:GSM 850/1900 ,UMTS Band II ,FDD-LTE Band2 / Band4/ Band7SIM 2: GSM 850/1900Camera: Front camera 5.0 MP /Rear 8.0 MPBluetooth: BT 4.0Built-in Battery: Lithium-Ion Battery 2100 MAH, 4-10 hours working time3. Battery ChargingConnect one end of the USB cable (supplied) to the USB port of the DC+5V adaptor (supplied) andthe other end of the USB cable to the USB port of the mobile phone, then plug the DC+5V adaptorinto the wall socket (AC 180-240V), charging will start。The battery can also be charged by connecting directly one end of the USB cable to the USB port ofthe mobile phone and the other end of the USB cable to the USB port of a computer.Note:When the battery is low, the screen will display “Battery is low”. The mobile phone may notfunction properly if battery is low, please recharge battery immediately.◆CautionDo not throw the battery into the fire, otherwise it may cause fire breakout or explosion of the battery. Do notplace the battery together with metal necklaces or with other metal objects, otherwise it may cause liquid leakage,overheat, fire breakout or explosion of the battery. Do not use or place the battery near the fire, oven or otherplaces with high temperature, otherwise it may cause liquid leakage, overheat, fire breakout or explosion of thebattery. If you notice, when charging the battery or using the mobile phone, that the temperature of the batteryis abnormally high; the color of the battery casing has changed; the battery casing is distorted or any otherunusual phenomena, please stop using the mobile phone and replace the battery. Do not charge the batterycontinuously for more than 24 hours.◆Inserting and Removing the SIM Cards or TF CardTurn off the mobile phone. Unplug the external power supply, remove the battery, then insert theSIM card or TF card into the holders as shown in the picture below. Do the same when you want
to remove the SIM card or TF card.Warning: Never insert or remove the SIM card or TF card when an external power supply isconnected, as this may cause damage to the SIM card or TF card.4. Power On/OffTo turn on the smartphone, long press Power On/Off key. To unlock, drag the “ ”icon to theupper. To lock the screen, short press the Power On/Off key. To turn off the mobile phone, longpress Power On/Off button, then touch “Power Off”.5. IconsIconDescriptionIndicate the strength of the network signals.Show missed calls.A new message is receivedAn application is being downloaded.The alarm clock has been set and activated.A call is in progress.
A piece of music is playingShow battery level.USB connection is enabledAccess is blocked.Connected to the WiFi networkBluetooth is turned on◆Calls OptionsMute: Press to mute the voice.Hands-free: Press to switch on the hands-free speaker.New call: Press to add a new callEnd a call: Press to end the current call.6. Data ConnectionData Connection: In the main menu, touch Settings, then select SIM cards, and select a SIM cardand touch Cellular data to Select a SIM for data. To turn off data connection, touch SIM slot 1 or2 .Note: To enable data connection, please first insert a SIM card into the mobile phoneWiFi: In the main menu, touch Settings, touch Wifi off to turn on and search. To turn off, touchagain.7. BluetoothIn the main menu, touch Settings，touch Bluetooth Off to turn on and search other Bluetoothdevices, when Bluetooth is turned on, your device can communicate with other nearby Bluetoothdevices. Touch Bluetooth On again to turn off your device.
8. USB Computer ConnectionTurn on the smartphone, use the USB cable (supplied) to connect the USB Port of the mobile phoneto the USB port of a computer, the iconhide automatically on the top of the screen of the mobile phone. Pull down from the top screen andtouch to go into the USB connection interface, you can select the Connection type by touching“ ” to enable it
10. SpecificationTouch Screen5 inch Touch Screen TNResolution854*480TNCPUMTK6737M 1.5GhzRAM1GBROM(EMCP FLASH )8GBOperation SystemAndroid 7.0NetworkWIFI802.11 b/g/nSIM 1GSM 850/1900 ,UMTS Band II ,FDD-LTE Band2 / Band4/ Band7SIM 2GSM 850/1900SpecialfunctionsSensorG-sensorBluetoothBluetooth 4.0FMYesWeb cameraDUAL CAMERA: Front 5.0 MP Camera; Back 8.0 MPExtendPort1.USB InterfaceUSB Micro 5Pin *12.Memory Card SlotSupport TF /Micro SD Card Up to 32GB extended.3.SoundEffect Interface3.5 MM Headphone jackBuilt-in Microphone: Support, high sensitive inputPowerSupplyBattery2100MAHAdapterAC In 100-240V.50-60HZ, DC Out DC 5V/ 1AWorking time4-10 hours working timeLanguageMulti-languagesUnit Size140.1*72.0*8.7mmSupportFormatPictureJPEG, JPG, BMP, GIFAudioMP4/MP3/WMA/APE/FLAC/AAC/WAVVideoAVI,WMA,3GP/MP4,MOV,MPG,VOB,MKV,FLV,TS/TP RMVBE-BOOKUMD, TXT, PDF etcExtrasPre-Installed AppAccessoriesUser Manual, DC Adapter ,Micro USB Cable,Earphone,Battery
11. Notices for the use of phoneYour phone is a product of superior design and craftsmanship and should be treated with care.The following suggestions can help you comply with the terms of repair kits, to extend the life ofmobile phone.1) Place the mobile phone and their parts and components out of reach of small children.1) Keep the phone dry, rain, humidity and all types of liquids which contain minerals will corrodeelectronic circuits.2) Don’t touch the phone with wet hands when charging, it will cause electric shock or damagethe phone.3) Avoid place the device in high temperature environment. Temperatures will shorten the life ofelectronic devices, damage batteries, and warp or melt certain plastics.4) Avoid place the device in too low temperature environment. When the temperature rises, thephone will produce water vapor that may damage electronic circuit.5) Avoid place the phone in dusty, dirty places, otherwise parts may be damaged.6) To avoid the phone in a lit cigarette, near open flame or any heat source.7) Do not open the device, non-professional approach will do damage to the phone.8) Do not throwit from height, knock or shake the phone, rough handling can damage internalcircuit boards.9) Do not paint the phone, because the paint will block headphones, microphones or otherremovable parts, and lead it not work.10) Use clean, soft, dry cloth to clean the camera, light sensor lenses. Prohibit the use of harmfulchemicals and cleaning agents, cleaning fluids to clean the phone11) If mobile phone, battery, charger, or mobile phone accessories are defective, send to thenearest qualified service center for inspection.12) If nessary, Service Centre staff will assist you and will arrange for phone repairs.
The FCC warning:This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interferenceAny changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.Specific Absorption Rate (SAR) information:This Mobile Phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: S100 (FCC ID: WVBMB9505) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.392W/kg and when properly worn on the body is 1.148W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.Body-worn OperationThis device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Navigation menu