BodyMedia BMSWBT200 Telemetry Transceiver User Manual BMSWBTWS Literature

BodyMedia, Inc. Telemetry Transceiver BMSWBTWS Literature

Users Manual

Rev 1 – Dec 04 BioTransceiver for Tanita Weight Scales Supplemental Instructions Please consult the Tanita® Operating Instruction sheet for instructions on setting up the scale and measuring your weight. Pay particular attention to ensuring that the scale is on a hard, even surface (not carpet). To Weigh Yourself 1. Press button number 1 on the left of the front edge of the scale 2. Wait for the scale to read 0.0 and beep 3. Stand on the scale and wait for it to beep again 4. Your current weight is automatically sent to the SenseWear® Wireless Gateway Only readings taken with button 1 will be relayed to your monitoring service NOTE: Other members of your household may use buttons 2-5 to weigh themselves without affecting your care
Rev 1 – Dec 04 Certifications Disclaimer This product is not intended to be a medical device or a substitute for proper medical diagnosis, care, or treatment related to your condition. Seek professional consultation if you have any questions related to the readings provided by this product. FCC statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit separate from the receiver. • Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC 47CFR 15C TCB - 47 CFR Part 15 Subpart C Intentional Radiator Certification Test FCC 47CFR 15B clB - 47 CFR Part 15 Subpart B Unintentional Radiator Class B Verification IEC 60601-1-1 (2000-12) - Medical Electrical Equipment - Part 1-1: General Requirements for Safety - Collateral Standard: Safety Requirements for Medical Electrical Systems Second Edition

Navigation menu