Blum Novotest RCA Radio Receiver for Measuring Probe User Manual 306600011 EN V3

Blum Novotest GmbH Radio Receiver for Measuring Probe 306600011 EN V3

UserMan

RC66 Radio Receiver focus on productivity Radio transmission for touch probes Installation instructions English Type P03.6600-010
Content  by Blum-Novotest 2010 3 1. Safety Rules ................................................................................... 4 2. System Overview .......................................................................... 4 2.1 Description ....................................................................................................... 4 2.2 Display Elements ............................................................................................. 6 2.3 Technical Data................................................................................................ 6 2.4 Area of Work ................................................................................................... 7 2.5 Complete System ........................................................................................... 7 3. Mechanical Installation ............................................................... 8 3.1 Mounting Variants........................................................................................... 9 4. Electrical Connection ................................................................ 12 5. Maintenance .............................................................................. 12 6. Order Numbers ........................................................................... 12 7. Radio Approval .......................................................................... 13  Installation instructions interface IF59-A2 (P03.5900-000.011) Keys: CAUTION Important advice for appliance protection  Advice to secondary literature  Additional advice Tip LED shines LED flashes Green Red Blue Orange Violet Abbreviations: Md Tightening Torque P03.6600-000.011 306600011_EN.docx 02.05.2011 version: V1A Original operating instructions Subject to technical change without any notice GN GN GN VT OG BU RD
Safety Rules 4  by Blum-Novotest 2010 1. Safety Rules CAUTION Risk of short-circuit Please separate connecting cable resp. plug connection off circuit only. 2. System Overview 2.1 Description The radio receiver is compatible with the BLUM measuring devices TC series (radio probes TC60, TC63-30). The receiver enables wireless communication between the measuring devices and the NC control. Data transfer to the NC control via IF59-A2 interface. Fig. 2.1 (1a) LED mode (2) cable (1b) LED battery (3) for mounting screws (1c) LED status (4) seal insert + O-Ring (1d) LED receive (at horizontal cable outgoing) (1e) LED transmit 90°ModeRC66IF59-A2P03.5900-010-A2341a1b1c1d1e2
System Overview  by Blum-Novotest 2010 5 Fig. 2.2 Modemax.Ø38min. Ø203042Ø 449,5Ø 3,3Ø 63,2M4373745Ø 6,3
System Overview 6  by Blum-Novotest 2010 2.2 Display Elements LED LED colour function MODE (1a) Standby Mode TC1 … TC6 Pairing procedure Battery (1b) Battery o.k. Battery low Status (1c) Initial position Probe deflected Receive (1d) off No reception Reception o.k. Transmit (1e) Send command Tab. 2.1 2.3 Technical Data Protection class IP68 Power supply 12 V DC / 100 mA via IF59-A2 Weight 600 g Signal transmisson Radio transmission Frequency band: 2,400 – 2,4835 GHz Transmission power 0 dBm Transmitter / receiver range 15 m, see chap. 2.4 Minimum bending radius 60 mm (application: flexible) Max. cable length 50 m Storage temperature -20 °C ... +70 °C Operating temperature +5 °C ... +50 °C Tab. 2.2 ModeModeBU RD GN GN RD OG BU VT GN GN
System Overview  by Blum-Novotest 2010 7 2.4 Area of Work TC60 Area of work: RC66 Transmitter / receiver range: Fig. 2.3 2.5 Complete System Fig. 2.4 ⇒ Switch ON/OFF via radio signal ⇒ Signal transmission for TC series 0°0°15°30°45°60°75°15°30°45°60°75°90°16141210615°30°45°60°75°15°30°45°60°75° 90°8240°15°30°45°60°75°90°1614121015°30°45°60°75° 90°8246RC66TC60IF59 - A2Z-NanoAuxTC63-30
Mechanical Installation 8  by Blum-Novotest 2010 3. Mechanical Installation CAUTION Risk of short-circuit Damage by chips Never install cables and hoses without protection. Cables and hoses must always be protected against chips (protective hose, protection spring, cover etc.). CAUTION Risk of short-circuit Damage of the cable by sharp edges Pls. deburr the sharp edges on the cable bushing and mount edge protection! CAUTION • The system should be placed protected from coolant and chips. • Distance between probe and receiver: Pay attention to chap. 2.4 • Keep distance to other radio systems
Mechanical Installation  by Blum-Novotest 2010 9 3.1 Mounting Variants Cable outgoing horizontal:  Pollution of the system Mount gasket (9a) and O-ring (9b) Fig. 3.1 Cable outgoing vertical: Fig. 3.2 4a 4b
Mechanical Installation 10  by Blum-Novotest 2010 Variant 1 Variant 2 Variant 3 (option) Fig. 3.3 (4a) seal insert (4b) O-Ring (5) universal holder (option)  Tightening torque: DIN912 M3x10: Md = 1,3 Nm (max.) DIN912 M4x10: Md = 3,0 Nm (max.) DIN912 M6x12: Md = 10,5 Nm (max.)  Drilling template (scope of delivery) M3 M4 M64aP03.5600-010.25454bP03.5600-010.080
Mechanical Installation  by Blum-Novotest 2010 11 Variant 3 Option Universal Holder Fig. 3.4 Variant 4: Option Front-Kit  Pls. refer to the appropriate data sheet 1622 M6Ø5,2Klemmschraubeclamping screwDIN913 M4 (2x)Md = 1,5 NmSchwenkbereichswivel range8,5271960°P03.5600-010.080P03.6600-010.250
Electrical Connection 12  by Blum-Novotest 2010 4. Electrical Connection  See installation instructions IF59-A2 5. Maintenance The receiver needs minimum maintenance only. Keep the receiver clean and free from chips. 6. Order Numbers Radio receiver RC66 - Cable length L = 10 m PUR L = 20 m PUR (8 wires) P03.6600-010-A2-10 P03.6600-010-A2-20 Front-kit P03.6600-010.250 Universal holder P03.5600-010.080 Heavy Duty Kit Protection spring 1m incl. screwing P03.5600-010.254 Interface IF59-A2 P03.5900-010-A2
Radio Approval  by Blum-Novotest 2010 13 7. Radio Approval Area: Radio Approval: Regulations: Europe: 0681 EN 300 328 V1.4.1, EN 301 489-17 V1.2.1, EN 60950-1:2001 Japan: R 202WW10568412 “This device has been granted a designation number by Ministry of Internal Affairs and Communications under „Ordinance concerning Technical Regulations Conformity Certification etc. of Specified Radio Equipment (特定無線設備の技術基準適合証明等に関する規則)“ Article 2-1-19. USA: FCC ID: ZCQRCA FCC Part 15 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canada: IC:9570A-RCA Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with IC Canada RF radiation exposure limits set forth for an uncontrolled environment as per RSS-102 Issue 4.
14  by Blum-Novotest 2010 EC Declaration of Incorporation acc. to the EC Machine Regulations 2006/42/EC in the edition from 17 May.2006 We hereby confirm that the subsequently following components are defined for the installation into other machines and that they are in accordance with the following safety requirements of the EC regulations. Commissioning is not allowed until it is ascertained that the machines, in which the components are installed, are in accordance with the EC regulations 2006/42/EC. The relevant technical information is compiled acc. to annex VII part B and, where appropriate, we will send the information concerning the components to the different countries. The industrial property rights of Blum-Novotest GmbH will remain unaffected. Component name: P03.6600 Radio receiver Safety requirements 2006/42/EG, Annex I 1.5.1 Applied standards: EC-Regulations: 2004/108/EG 2006/95/EG 1999/5/EG Applied harmonized standards: EN61000-6 EN60204-1 EN ISO 12100 EN 300 328 EN 301 489-17 EN 60950-1:2001 Applied national standards: DIN VDE 0100 DIN VDE 0113 Authorised presentative for technical information: Blum-Novotest GmbH Kaufstr. 14 88287 Gruenkraut, Germany
 by Blum-Novotest 2010 15 Service Order Please fill out completely this repair order and attach it to the system. This will save you and us costs due to time-consuming inquiries and ensures a quick repair. Blum-Novotest GmbH Kaufstr. 14, 88287 Gruenkraut/Gullen - Germany Tel. +49 751 6008-0, Fax. +49 751 6008-156 Company: Department: Contact: Address: Phone: Fax: Email: Probe Type, Serial No.: Machine Type, Manufacturer: Description of Defect:
focus on productivityfocus on productivity Blum-Novotest GmbH Kaufstr. 14 88287 Gruenkraut, Germany Tel.:+49 751 6008-0 Fax:+49 751 6008-156 www.blum-novotest.com vk@blum-novotest.com Hotline: Vertrieb/sales: Tel.:+49 751 6008-200 Service LaserControl : Tel.:+49 751 6008-202 Service Messtaster/probes: Tel.:+49 751 6008-203 Blum-Novotest GmbH Prüftechnik KK Blum Laser Measuring Technology Willich, Germany Nagoya, Japan Tel. +49 2154 921970 Tel. +81 568 74-5311 Blum-Novotest Srl Blum-Novotest Como, Italy Shanghai, China Tel. +39 031 283 955 Tel. +86 21 52080480 Blum-Novotest Ltd. Blum Production Metrology Co., Ltd. Birmingham, England Taichung, Taiwan Tel. +44 1543 257111 Tel. +886 4 2358 3900 Blum Laser Measuring Technology Inc. Blum Production Metrology Pte. Ltd. Cincinnati, USA Singapore, Singapore Tel. +1 859 3446789 Tel. +65 62720998 Blum-Novotest Sarl Blum-Novotest Ltd. Bordeaux, France Soul, Republic of Korea Tel. +33 55702 0135 Tel. +82 2 2026-1300 Blum-Novotest s.r.o. Kroměříž, Czech Republic Tel. +420 573 330373 Support

Navigation menu