Billionton Systems UBTC1 Bluetooth USB Dongle User Manual 3

Billionton Systems, Inc. Bluetooth USB Dongle Users Manual 3

UserManual.wiki >

Billionton Systems >

UBTC1 User Manual >

Contents

Users Manual 3

395. Please refer to the PDA ActiveSync Setting to complete the Bluetooth ActiveSync Configuration Process

40 3.10. Audio Gateway setting for windows The Audio Gateway Application allows a remote Bluetooth device to use this computer's microphone and speakers as the remote device's audio input and output devices. *Remember please switch your Audio device to "Bluetooth Audio" from control panel. Open a connection to the Audio Gateway service that is provided by another Bluetooth device using one of these techniques: • Windows system tray, Bluetooth icon • From Bluetooth Explorer • Using the Bluetooth Setup Wizard

41 From Bluetooth Explorer to connection your headset device. Key in headset pair key or PIN code. (Refer to the Headset's user's manual for reference) Close an audio gateway connection: If the connection was established via the Bluetooth icon in the Windows system tray; click the Bluetooth icon, select Quick Connect, Audio Gateway and then select the device that is providing the service (active connections have a checkmark in front of them). Or No matter how the connection was created, In My Bluetooth Places, right-click the service name and select Disconnect.Configure The Bluetooth Configuration Panel > Client Applications > Audio Gateway > General tab provides options to configure: • The application name-- to change it, highlight the existing name and enter the new name. • Enable or disable secure connection. To enable secure connection, place a checkmark in the box.

42 3.11.Personal area network setting for windows The Personal Area Networking (PAN) chapter will show you how two or more Bluetooth enabled devices can form an ad-hoc network and how the same mechanism can be used to access a remote network through a network access point.

43How to setup an Ad-hoc Network 1. On the client, in the Folders pane of "My Bluetooth Places", select "Entire Bluetooth Neighborhood". 2. In the right pane of "Entire Bluetooth Neighborhood", right-click anywhere except on a device name and select Refresh from the pop-up menu. 3. In the right pane of "My Bluetooth Places", right-click the server that will provide the Networking Access Service and select Discover Available Services from the pop-up menu to update the available services list. The available services will be displayed in the right pane of "My Bluetooth Places". Double click Network Access to establish a PAN network. If the system pops up a "Bluetooth PIN Code Request" window please key in the same passkey or PIN code between the two devices.

44 Once connected, you can check your Bluetooth PAN network neighborhood from the file explorer or by the "Search Computers" function.

45How to setup with Bluetooth Network Access Point The Bluetooth Software makes it easy to join an existing personal network, hosted by another Bluetooth device (PocketPC, desktop, etc.) From the My Bluetooth Places, choose Entire Bluetooth Neighborhood, and select the Bluetooth device that you want to establish a PAN connection and double click the device icon.

46It will list out all the available services of this device, please select the NAP Service. Right click the NAP Service and select "Connect to Network Access Point", your PC will get an IP address from the Network Access Point. At this moment, you might be prompted to enter the IP network settings; if this is the case, choose "Obtain an IP address automatically" from your Bluetooth Network TCP/IP setting. After selecting the host, a connection will then be established between your PC and the host over the personal network.

48Chapter4 Setup for PocketPC2000 & PocketPC 2002 (1) Make sure your PDA is connected with your PC, CF Bluetooth card securely sits in the PDA'S CF slot, and the installation disk in your PC's CD-ROM, the Setup program should launch automatically. If Setup does not launch automatically, use Windows Explorer to navigate to the appropriate CD-ROM drive and double click on "bsetup". (2) Select “Install Drivers and Application Software”. 4

49(3) If you have a Microsoft PocketPC 2000 or 2002, please select "PocketPC 2000, 2002 " at the Setup dialog box. If you have a Microsoft PocketPC 2003, please select “PocketPC 2003”, the installation steps are similar to "PocketPC 2000, 2002".

50(4) Follow the instructions on the screen: a) On the Welcome screen, click the Next button.

51b) When the License Agreement screen is displayed, read the License Agreement, then click "Yes" to go to the next step. c) On the Setup Type screen, click "Typical" and click "Next" to accept the default setting.

52d) The system will start installing all the necessary setup files. e) When the installation is completed, click the "Finish" button on the Completed screen. f) On the handheld (PDA) device: Tap "Yes" to accept the default directory and install the software. g) A Welcome screen will be shown with basic instructions to use BTW-CE.

53h) Check off "Add a shortcut in the Start menu" in order to have access to the "Bluetooth Manager" from the Start menu. i) Perform a "soft" reset to the handheld computer. Refer to your device's documentation for the exact procedure. NOTE: A soft reset leaves installed applications and stored data intact, and simply restarts the device. A hard reset deletes ALL downloaded applications on the handheld. See the handheld computer's documentation for additional information.

58 Click “File Transfer” tab to display information about your CE device shared folder, you can modify the shared folder here. The options on this tab only affect incoming File Transfer connections. There is one additional configurable item: "My shared folder" which allows you to specify the default File Transfer directory, the highest level directory on this PocketPC that remote devices have access to. To change the default File Transfer directory, tap folder navigate to the desired directory, and then tap the "OK" bottom.

59Information Exchange page displays your business card. You can set your business card in here. The Common Options on this tab only affect incoming Information Exchange connections. There is one additional configurable item: "My business card (vCard)". The "My business card" information comes from a selected record in the Contacts list of Pocket Outlook. Information from the selected record is sent to remote devices on request. It is also the contact information that is sent when you select "Send your business card to one or more recipients" while using Business Card Exchange. The default selection is "none" (no information). To select a vCard, tap “Choose a contact” from the list, and then tap OK. To discontinue sending contact information when it is requested, tap Choose "(none)" from the list, and then tap OK. If you reach the contacts list by mistake, tap OK to return to the previous screen. Serial Port page displays your Serial Port setting. The configurable options on this tab only affect incoming Serial Port connections. All of the Common Options (see Section 2.3.1) are available. There are two additional, non-configurable items:

60* Inbound COM Port: the local communications port that is used for inbound serial connections. * Outbound COM Port: the local communications port that is used for outbound serial connections. The Inbound and Outbound COM ports are permanently assigned and cannot be changed. Dial-Up Networking page displays your Dial-Up Networking setting. You can change your COM port, baud rate and Flow control here. There are three additional items: * COM Port: select the communications port to be used. * Baud rate: tap the down-arrow and select a baud rate from the drop-down list. The options range from 1,200 to 115,200 baud, in nine steps. * Flow control: tap the down-arrow and select the type of flow control to be used from the drop-down list. The options are: Off Hardware (Rts/Cts).

61 Connection Open-Context Sensitive Menu Options From the My Connections screen, tap and hold a connection icon that is associated with an OPEN connection to access the context sensitive menu. The Menu options are: * Disconnect-close the open connection * Status-select this option to display the Connection Status screen (double-tap default).

62Connection Status Screen This screen displays: The connection name The remote device's name The connection status: Connected/Not Connected The length of time the connection has been active Activity information: The amount of data sent The amount of data received. A graphic signal strength indicator.

63Network sharing setting for WinCE Explore Bluetooth device in your range 1. You can check all the available Bluetooth devices by using "Connection Wizard". To start "Connection wizard", please tap the "star B" icon at bottom bar of the "Bluetooth Manager". 2. There are many connection types to choose from in the "Connection Wizard". The first connection type explores all available Bluetooth devices within the Bluetooth connectivity range. Other connection types explores specific services in the Bluetooth device, e.g. Dial-Up, Information Synchronization (ActiveSync), File transfer.. etc. Please click "Explore a Bluetooth device" then click "Next".

64 3. Follow the "Connection Wizard", tap the device selection box in the middle of the screen, it will jump to the next page. 4. All the Bluetooth enabled devices within the discoverable range will be shown. In this example we will select the access point icon "R_8001d5[172.18...".

65 5. All the available services for this device are shown as below. Select the service that you'd like to use and create a connection shortcut for this device, then tap "Next" to the next step. 8. Tap "Finish" to create a shortcut to the Access Point on the Bluetooth manager.

66 9. If you want to use this service, double-tap the icon, or tap-and-hold the connection icon and select "Connect" from the menu. Then you can access the Internet. Note: Consult the MIS personnel in your company for proxy setting if necessary. For setting up the Proxy to surf the Internet via a Bluetooth Access Point: 1. Click on "Start" button, click "Settings", and "Connections" tab. Click on the "Connections" icon. 2. Change the "My network card connects to:" drop-down list to "Work", change the "When needed, automatically connect to Work using these settings:" drop-down list to "Work Settings", and click "Modify".

67 3. Click on the "Proxy Settings" tab, and select both checkboxes, then enter the Proxy IP address obtained from your MIS personnel.

68 File transfer setting for WinCE File transfer service lets you transfer pictures, documents or music files to other Bluetooth devices. Starting file transfer by using "Connection wizard" from Bluetooth manager. 1. At "Connection wizard" , tap "Browse files on a remote device", then tap "Next". 2. Follow the instructions on the screen to the next step. 3. Then select a device that you want to transfer the file(s) to.

69 4. Follow the instructions to complete the connection setting, and now you can transfer files between the two devices. Change the Remote Device Folder To move down in the directory structure of the remote device, tap the new folder in the main portion of the Bluetooth File Explorer window. To move up in the directory structure of the remote device, tap the down-arrow to the right of the currently selected folder and select the new folder from the drop-down list. File Menu All of the following instructions in the subsections assume that there is an open File Transfer connection with a remote device. Send a File to the Remote Device To send a file to the remote device, from the File menu, tap Send a File to display the Open screen.

70The options on the Open screen are: * Folder-tap the down-arrow and select the folder that contains the file to be sent. * Type-the only option is "All Files (*. *)" * A list of files in the selected folder; tap the file to be sent * Cancel button-aborts the Send a File operation. The selected file is sent automatically when it is tapped, without further intervention, and the Bluetooth File Explorer main screen reappears. Create a Folder on the Remote Device To create a folder on the remote device, navigate to the folder in which the new folder will be placed, and then, from the File menu, tap Create a Folder. Enter a name for the new folder while the default name (New Folder) is highlighted. Get a File From the Remote Device To get a file from the remote device: 1. Navigate to the folder on the remote device that contains the file 2. Tap the desired file to highlight it 3. From the File menu, tap Get. The file is copied to the local folder listed in the Local Folder field near the top of the screen. This operation can also be performed using the tap-and-hold technique: tap-and-hold the desired file and select Get from the pop-up menu. Delete a File on the Remote Device To delete a file on the remote device: tap the file to be deleted to highlight it, then, from the File menu, tap delete. Tap OK in the confirmation dialog box. This operation can also be performed using the tap-and-hold technique: tap-and-hold the desired file and select Delete from the pop-up menu. Tap OK in the confirmation dialog box.

72 Dial-up networking setting for WinCE Dial-up Networking allows you to connect to a remote computer that is connected to a phone line. Once connected, you can browse the Internet, check your email, etc. The remote Bluetooth device that will provide the Dial-up Networking service must have access to a telephone system (either a physical or cellular connection). Devices that might provide the Dial-up Networking service include: * Bluetooth-enabled cellular telephones * Bluetooth-enabled desktop computers that are attached to a telephone system * Bluetooth modems. The remote computer to which you are connecting must also be attached to the phone system and capable of answering a call. 1. To begin dial-up networking setup for using a cell phone, please tap "Partner with a cell phone" from Bluetooth connection wizard, and click "Next". NOTE: For some mobile phones, e.g. Ericsson, we recommend you use the "Explore a Bluetooth device" option rather than the "Partner with a cell phone" option when pairing. 2. And prepare your cell phone in Bluetooth function enable mode, (To enable your cell phone's Bluetooth function, please refer to the user's guide of your cell phone ) and tap "Next" to continue.

73 3. After searching, the Bluetooth manager will display the cell phones in range. Double-tap the cell phone icon that you wish to connect to and continue to the next step to pair with this cell phone. 4. Please key in a passkey when prompted, and key in the same passkey on the cell phone to complete the pairing process.

74 5. Tap "Finish" to complete this step. Create a Bluetooth Dial-up connection 1.Create a connection to the device that will provide telephone access. 2. From the Bluetooth Manager, My Connections tab, tap-and-hold the Dial-up Networking connection shortcut, and then select Connect from the pop-up menu. 3. On the first Bluetooth: New Dial-up Connection screen, double-tap New Connection.

75 4. On the second Bluetooth: New Dial-up Connection screen: a) Enter a name for the connection b) If dialing outside of the default country setting, enter the country code c) If dialing outside of the default area code setting, enter the area code d) Enter the phone number to be dialed. 5. Tap OK Please follow the Dial-Up connection procedures above to complete the Dial-Up settings. Refer to the PocketPC documentation for assistance. After the connection is active, open a web browser on the PocketPC. Alternatively, you could set up the connection the traditional way, if the above method did not work for you. 1. Click on "Start" button on the top of the menu bar. 2. Select "Settings", click on the "Connections" tab.

763. Click on the "Connections" icon. On the top "Internet Settings", click "Modify". 4. Click "New..." to start a new connection. 5. Give the new connection a name, select "Bluetooth Dialup Modem", and set the baud rate at "115200".

77 6. Click "Advanced...", change the "Parity" to "Even", "Stop Bits" to "1", and "Flow Control" to "None". 7. Click on the "TCP/IP" tab, and make sure both "Use software compression" and "Use IP header compression" checkboxes are selected.

78 8. Click on the "Name Servers" tab. Some GPRS service may require you to enter the DNS addresses, please check with your GPRS ISP before making the changes. Otherwise, leave the radio button selected at "Use server-assigned addresses" and click "OK". 9. Click "Next", enter the phone number for your GPRS connection. Then click "Next".

Navigation menu