Billionton Systems GUBTCR4XX USB Bluetooth Adapter User Manual GUBTCR4XT XX YYY Manual 0103 p

Billionton Systems, Inc. USB Bluetooth Adapter GUBTCR4XT XX YYY Manual 0103 p

Contents

User Manual 2

89The [Add New Connection Wizard (Searching for Services)] window will appear. 5. If you are connecting to the wireless modem station for the first time, enter the passkey for the device from the [Bluetooth Passkey (PIN Code)] window, and then click on the [OK] button.
90 Once the program has finished searching for the services, the [Add New Connection Wizard (Select Service)] window will appear.6. Select "Fax" under [Select Service], and then click on the [Next] button. The [Add New Connection Wizard (Select COM Port)] window will appear.7. Check [Use default COM port], and then click on the [Next] button.
91NoteΗThe modem station will be installed to the grayed-out COM port displayed under [Assignment of COM Port] in this window. You will be specifying this COM port in Step (3) of "ƔInstalling a Modem", so please write it down for future reference. The [Add New Connection Wizard (Connecting to Remote Device)] window will appear.The [Add New Connection Wizard (Modem Settings)] and [Phone and Modem Options] windows will appear.
928. Click on the "Add..." button in the [Phone and Modem Options] window.The [Add New Hardware Wizard (Install New Modem)] window will appear. Install the modem by following the instructions in the windows that follow. Installing a modem The [Add New Hardware Wizard (Install New Modem)] window will appear. 1. Check [Don't detect my modem; I will select it from a list], and then click on the [Next] button.
93A list of modem manufacturers and models will appear. 2. Select the desired wireless modem from under [Manufacturer] and [Models], and then click on the [Next] button.NoteΗIf you have not yet installed a modem driver, click on the "Use Device" button to install one from this window.ΗIf no modem drivers appear, please select "(Standard Modem Types)" and "Standard 33600 bps modem."
94A window will appear where you can specify the port to which you can install the modem.3. Select "Selected Port", specify the COM port to which the modem will be installed, and then click on the [Next] button.ImportantΗPlease specify the COM port displayed in the window pertaining to Step (7) under "ƔSetting up the modem station."
954. Click on the [Continue] button.The wizard will display the following window by design, but you may disregard it and click on the "Continue" button. A window will appear indicating that the modem installation is complete.5. Click on the [Finish] button. 6. Confirm that the configured modem has been added to the list in the [Phone and Modem Options] window, and then click on the [OK] button.
96 The [Next] button will be enabled on the [Add New Connection Wizard (Modem Settings)] window.7. Click on the [Next] button on the [Add New Connection Wizard (Modem Settings)] window. The [Add New Connection Wizard (Connection Name Settings)] window will appear.
978. Enter the type and name of the icon displayed after registration, and then click on the [Next] button.Please click on the [Next] button if you are satisfied with the settings. The [Add New Connection Wizard (Completing the Add New Connection Wizard)] window will appear. 9. Click on the [Finish] button.The settings will be registered, and the icon will appear in the [Bluetooth Settings] window. Setting fax information Configure send/receive settings and register fax information. 1. Select [Start]Æ[Control Panel], and then double-click on the [Printers and Other Hardware] icon. NoteΗIf the control panel is displayed in "Classic view", and you use Windows 2000, please start from Step (2). 2. Double-click on the [Printers and Faxes] icon.The [Printers & Faxes] window will appear.
983. Click on "Install a local fax printer" in the [Printers and Faxes] window. A window showing installed programs will appear, and a Fax icon will have been created in the [Printers and Faxes] screen. 4. Click on "Send a fax" under "Printer Tasks" on the left side of the window.
99 If you have not yet configured a fax device, the [Fax Configuration Wizard] window will appear. In the window you can enter settings pertaining to the sender (yourself).NoteΗIf the fax configuration information has already been registered, the [Send Fax Wizard] window, which can be viewed under "Sending a fax" below, will appear instead of the [Fax Configuration Wizard] window. 5. Enter the sender information, and click on the [Next] button
100NoteΗThe sender information that you configure here will be automatically appended as header information when you send a fax. 6. Select a device to be used for fax transmissions, enable the device for sending or receiving, and then click on the [Next] buttonNoteΗIf [Enable Receive] is selected, the device will be on standby for receiving faxes even if it is not sending or receiving anything, and therefore will be in continuous
101 connection to the wireless modem (when COM Auto Connect is on). Please decide whether to select this option based on the desired objective and/or frequency of transmission. 7. Click on the [Next] button.It is important that you do not change the transmitter subscriber identification. 8. Click on the [Finish] button.
102Setting fax information ImportantΗThe Fax service must be enabled for sending in order for you to send a fax. Please refer to "Using a wireless modem station" under "Troubleshooting" for how to change the send and receive settings once the service has been configured. 1. Double-click on the [Fax] icon in the Control Panel. The [Fax Console] window will appear.2. In the [Fax Console] window, click [File]ĺ[Send fax].The [Send Fax Wizard (Starting the Send Fax Wizard)] window will appear. 3. Click on the [Next] button.
103 The [Send Fax Wizard (Recipient Information)] window will appear.4. Enter the name and fax number of the destination party, and then click on the [Next] button. The [Send Fax Wizard (Preparing the Cover Page)] window will appear.5. Specify the cover page template, subject line, and note (body text), and then click on the [Next] button.
104 The [Send Fax Wizard (Schedule)] window will appear. 6. If you wish to send the fax immediately, select "Now", and then click on the [Next] button. The [Send Fax Wizard (Completing the Send Fax Wizard)] window will appear.7. Confirm the destination information and transmission details, and then click on the [Finish] button.
105 The software will automatically dial the number and send the fax.Once the fax has been sent, Fax Monitor will revert to standby mode. Receiving a fax 1. When a fax arrives, the Fax Monitor will start automatically as the fax is received.
106 Once the fax has been received, the Fax Monitor will revert to standby mode. NoteΗIf you have enabled manual fax reception, the message below will appear when a fax arrives. Click on the message with your mouse to receive the fax.2. Double-click on the [Fax] icon in the Control Panel. The [Fax Console] window will appear.3. In the [Fax Console] window, double-click on the fax that has arrived.
1074.6.2 Using a mobile telephone for fax transmission ImportantΗPlease ensure that any drivers used to connect the PC to the mobile telephone have been installed. ΗBluetooth passkey (PIN code) is required for you to connect to the mobile telephone. Please make a note of your Bluetooth passkey before you start the set-up process. ΗA fax application is required for you to be able to send and receive faxes. The description below is based on a example using Microsoft Fax, which is installed with Windows XP as standard. Setting up the mobile telephone 1. Turn on the mobile telephone, and set it to be connectable via Bluetooth.2. Right-click on the Bluetooth icon in the task tray, and then click on [Add New Connection].NoteΗAlternatively, click [Start]ĺ[All Programs]ĺ[Bluetooth]ĺ[Bluetooth Settings], and then click on [New Connection] from the active [Bluetooth Settings] window. The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window will appear.3. Select [Custom Mode], and then click on the [Next] button.
108 The [Add New Connection Wizard (Searching for Bluetooth devices)] window will appear. Once the program has finished searching for the devices, the [Add New Connection Wizard (Select Device)] window will appear.4. Select the device name of the mobile telephone from [Device List], and then click on the [Next] button.
109The [Add New Connection Wizard (Searching for Services)] window will appear. 5. If you are connecting to the mobile telephone for the first time, enter the passkey for the device from the [Bluetooth Passkey (PIN Code)] window, and then click on the [OK] button.
110 Once the program has finished searching for the services, the [Add New Connection Wizard (Select Service)] window will appear.6. Select "Fax" under [Select Service], and then click on the [Next] button. The [Add New Connection Wizard (Select COM Port)] window will appear.7. Check [Use default COM port], and then click on the [Next] button.
111NoteΗThe mobile telephone will be installed to the grayed-out COM port displayed under [Assignment of COM Port] in this window. You will be specifying this COM port in Step (3) of "ƔInstalling a Modem", so please write it down for future reference. The [Add New Connection Wizard (Connecting to Remote Device)] window will appear.The [Add New Connection Wizard (Modem Settings)] and [Phone and Modem Options] windows will appear.
1128. Click on the "Add..." button in the [Phone and Modem Options] window.The [Add New Hardware Wizard (Install New Modem)] window will appear. Install the modem by following the instructions in the windows that follow. Installing a modem The [Add New Hardware Wizard (Install New Modem)] window will appear. 1. Check [Don't detect my modem; I will select it from a list], and then click on the [Next] button.
113A list of modem manufacturers and models will appear. 2. Select the desired mobile telephone from under [Manufacturer] and [Models], and then click on the [Next] button.NoteΗIf you have not yet installed a mobile telephone driver, click on the "Use Device" button to install one from this window.ΗIf no mobile telephone drivers appear, please select "(Standard Modem Types)" and "Standard 33600 bps modem."
114A window will appear where you can specify the port to which you can install the modem.3. Select "Selected Port", specify the COM port to which the modem will be installed, and then click on the [Next] button.ImportantΗPlease specify the COM port displayed in the window pertaining to Step (7) under "ƔSetting up the modem station."
1154. Click on the [Continue] button.The wizard will display the following window by design, but you may disregard it and click on the "Continue" button. A window will appear indicating that the modem installation is complete.5. Click on the [Finish] button. 6. Confirm that the configured modem has been added to the list in the [Phone and Modem Options] window, and then click on the [OK] button.
116 The [Next] button will be enabled on the [Add New Connection Wizard (Modem Settings)] window.7. Click on the [Next] button on the [Add New Connection Wizard (Modem Settings)] window. The [Add New Connection Wizard (Connection Name Settings)] window will appear.
1178. Enter the type and name of the icon displayed after registration, and then click on the [Next] button.Please click on the [Next] button if you are satisfied with the settings. The [Add New Connection Wizard (Completing the Add New Connection Wizard)] window will appear. 9. Click on the [Finish] button.The settings will be registered, and the icon will appear in the [Bluetooth Settings] window. Setting fax information Configure send/receive settings and register fax information. 1. Select [Start]Æ[Control Panel], and then double-click on the [Printers and Other Hardware] icon . NoteΗIf the control panel is displayed in "Classic view", and you use Windows 2000, please start from Step (2). 2. Double-click on the [Printers and Faxes] icon.The [Printers & Faxes] window will appear.
1183. Click on "Install a local fax printer" in the [Printers and Faxes] window. A window showing installed programs will appear, and a Fax icon will have been created in the [Printers and Faxes] screen. 4. Click on "Send a fax" under "Printer Tasks" on the left side of the window.
119 If you have not yet configured a fax device, the [Fax Configuration Wizard] window will appear. In the window you can enter settings pertaining to the sender (yourself).NoteΗIf the fax configuration information has already been registered, the [Send Fax Wizard] window, which can be viewed under "Sending a fax" below, will appear instead of the [Fax Configuration Wizard] window. 5. Enter the sender information, and click on the [Next] button
120NoteΗThe sender information that you configure here will be automatically appended as header information when you send a fax. 6. Select a device to be used for fax transmissions, enable the device for sending or receiving, and then click on the [Next] buttonNoteΗIf [Enable Receive] is selected, the device will be on standby for receiving faxes even if it is not sending or receiving anything, and therefore will be in continuous
121 connection to the wireless modem (when COM Auto Connect is on). Please decide whether to select this option based on the desired objective and/or frequency of transmission. 7. Click on the [Next] button.It is important that you do not change the transmitter subscriber identification. 8. Click on the [Finish] button.Please refer to the same procedure of “Sending a fax” and “receiving a fax” in the “using a modem station for transmission” section.
1224.7 Using a Bluetooth-compatible camera Connecting the camera 1. Click on [Start ]Æ[All Programs]Æ[Bluetooth]Æ[Remote Camera].NoteΗIn Windows 2000, click on [Start]ĺ[Programs]ĺ[Bluetooth]ĺ[Remote Camera]. The [Remote Camera] window will appear.2. Turn on the camera, and set it to be connectable via Bluetooth.NoteΗDifferent cameras are operated in different ways, depending on the manufacturer and model used. Please refer to the instruction manual for further details on how to operate your camera. 3. Click on the [Camera Search...] button. The camera will be detected and its icon displayed.
1234. Right-click on the camera icon, and select [Connect]. The camera will be connected, and images from the camera will appear on-screen.Taking a signal picture By placing the mouse cursor over the on-screen image, the camera's operating window will appear. You can operate the camera from this window.
1241. Click on the button in the operating window.A single image will be captured and sent to the PC. Taking several consecutive frames 1. Click on the button in the operating window.A succession of images will be captured and sent to the PC.
125NoteΗThe remote camera shutter cannot be operated while the camera is connected to the PC. ΗThe number of consecutive pictures taken can be set to anywhere between 2 and 16. 1. In the [Remote Camera] window, click on [Bluetooth]ĺ[Properties]Æ [Consecutive Image Settings]. 2. Click on the [<][>] buttons to select the number of consecutive images to be captured. NoteΗImages are not only sent to the PC, but are stored in the camera's on-board memory as well. Please be aware of the remaining memory capacity when you are taking a large number of pictures.ΗLarge file sizes are common for high-resolution images, and may take some time to be transferred to the PC.Viewing images saves on your PC A "Remote Camera" folder will be created in the "Bluetooth" folder under "My Documents" during initial set-up. A folder bearing the same name as the camera will be created in it, and images will be saved in this folder. Click the [Explorer] button in the [Remote Camera] window to display the folder where the images have been saved.
126NoteΗThis window is an example showing pictures when [Filmstrip] has been selected from the [View] menu in Explorer.
1274.8 Using a headset to communicate Registering the headset 1. Right-click on the Bluetooth icon in the tasktray, then click on [Add New Connection Wizard].NoteΗAlternatively, you can click on [Start]>[All Programs]>[Bluetooth]>[Bluetooth Settings], then click on [New Connection] in the [Bluetooth Settings] screen that has opened. The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] screen will appear.2. Turn the headset power on.Once you have turned on the headset, set the mode to enable a Bluetooth connection. ImportantΗThe procedure for operating the headset may differ depending on the manufacturer and model. Please consult your user guide for a detailed description of how to operate the unit. 3. Confirm that [Express Mode] has been selected, then click on the [Next] button.
128 The [Add New Connection Wizard (Searching for Bluetooth Devices)] screen will appear. Once the device search has been completed, the [Add New Connection Wizard (Select a Device)] screen will appear.4. Select the name of the headset device from the list, then click on the [Next] button.
1295. Answering with the headset.If the service has been properly detected, a screen will appear indicating that the headset is being called, and a tone will accordingly sound in the headset. Please press the headset switch. ImportantΗThe procedure for operating the headset may differ depending on the manufacturer and model. Please consult your user guide for a detailed description of how to operate the unit. The [Add New Connection Wizard (Configuring (Connecting to Voice Circuit))] screen will appear, and device configuration will be performed. NoteΗIf you are connecting to the headset for the first time, or if another Bluetooth audio device (for example, the TOSHIBA Speech Recognizer) has not yet been registered, the following [Found New Hardware Wizard] screen will appear, from
130 which you can proceed to install the driver. If another audio device has already been registered (i.e., the driver has been installed), you can proceed to Step 9 without having to install the driver. 6. Click on the [Next] button. The [Install Hardware] screen will appear.7. Click on the [Continue Anyway] button.The following screen will appear automatically. You may disregard it and click on the [Continue Anyway] button. The [Add New Connection Wizard (Completing the Found New Hardware Wizard)] screen, which is the final screen of the installation wizard, will appear.
1318. Click on the [Finish] button. Once driver installation is complete, the [Add New Connection Wizard (Enter Connection Name)] will appear.9. Confirm the information you have entered, and click on the [Next] button. The [Add New Connection Wizard (Completing the Add New Connection Wizard)] screen will appear.
13210.Click on the [Finish] button.The configuration information will be registered, and an icon will be displayed in the [Bluetooth Settings] screen. Making a connecting to the headset You can make a connection to the headset from an icon that has been registered in [Bluetooth Settings]. ImportantΗBefore making a connection to the headset, please check that you have turned on the headset's power, and it has been enabled for a Bluetooth connection. Please ensure that the following audio-related applications have been closed before you connect the headset to your PC. oWindows Media Player, BeatJam, InterVideo WinDVD and other music/audio playback software oWindows Messenger and other e-conferencing software oLaLaVoice and other voice-recognition software If you wish to use these applications, please terminate the headset connection before you launch them. 1. Right-click on the headset icon, then click on [Connect].
1332. Answer with the headset.A screen will appear indicating that the headset is being called, and a tone will accordingly sound in the headset. Please press the headset switch. If the connection has been properly established, the icon's appearance will change to indicate a connected state. You may now launch conferencing and voice-recognition software and use the headset. Disconnecting from the headset Please follow the steps below to disconnect from the headset. 1. Right-click on the headset icon in the [Bluetooth Settings] screen, then click on [Disconnect].
134A message will appear, requesting confirmation that you wish to disconnect. Click on the [Yes] button. The icon on the [Bluetooth Settings] screen will appear as shown below, indicating that the device has been disconnected.
135Chapter 5 Advanced features 5.1 Making a device undiscoverable to other users 1. Right-click on the Bluetooth icon in the task tray, and then click on [Device Properties]. The [Device Properties] window will appear.2. Select [Non-discoverable mode] in [Discoverability mode] under the [Mode] tab, and then click on the [OK] button.45
136 Your device will now be undetectable by other users, even when they search for other devices. NoteΗOther devices are still able to establish connections with your device even if you have enabled the Non-discoverable mode. Please enable "Non-connectable mode" if you wish to reject connections from other devices.5.2 Encrypting the content of your transmissions Since Bluetooth communication is conducted wirelessly, there is always the possibility that a third party may be able to intercept your transmissions. You can use encryption to render the content indecipherable to anyone who manages to intercept it. ImportantΗEncrypting your transmissions will still not guarantee complete security. Accordingly, please be aware that transmitting data is conducted with an element of risk for the user. 1. Right-click on the Bluetooth icon in the task tray, and then click on [Device Properties]. The [Device Properties] window will appear.2. Select [Link Level Enforced Security] in [Security Mode] under the [Mode] tab, put a check next to [Encryption], and then click on the [OK] button.
137NoteΗOnce you have configured the security mode, a window will appear when you first make a connection to another device, prompting you to enter a Bluetooth passkey (PIN code). Please click on the [OK] button after you have entered the passkey. ΗThe window in which you enter the passkey will not appear once you have connected more than two times to the device. 5.3 Changing the default connection The "default connection" refers to the dial-up connection configured for use whenever a connection is made to the Internet. If several connections have been registered, you can change the default connection by following the procedure below. 1. Start Internet Explorer.
1382. Click on [Tools]ĺ[Internet Options...]. The [Internet Options] window will appear.3. Click on the [Connections] tab. In this window, "Direct Connection" is set as the default, and "Never dial a connection" has been selected. Change the settings so that "London A" will always be dialled when you connect to the Internet.4. Select "Always dial my default connection".
139ˈˁ Click on "London A", and then click on the [Set Default] button.ʳ "London A" has been changed to the default connection.ʳ
1405.4 Manually creating a virtual Bluetooth COM port In order for a PC to connect to and communicate with a Bluetooth device, the Bluetooth Utility will create a gateway for data to be exchanged between the respective devices. This gateway is known as a "port" (or "virtual COM port"). Since one virtual COM port will be allocated to each device, trouble-free communication will still be possible even if several devices are being used. When you use the Bluetooth Utility, a virtual COM port will be automatically created on set-up; however, virtual COM ports can be created manually if so needed. 5.4.1 Clients and servers When Bluetooth communications are performed, there will always be a "client/server" relationship between the various devices. A "client" is a device that sends certain requests to another device, while a "server" is a device that provides a service on receipt of such requests from another device. For example, when a PC issues a print command to a wireless printer, the PC functions as the client, while the printer functions as the server. When a PDA or other device attempts to receive files located on a PC by means of file transfer protocol, the PC functions as the server, while the PDA functions as the client.Virtual Bluetooth COM ports can be created both for clients and servers.
141xBluetooth virtual COM port for a clientVirtual COM port used when your device is the client, and requests are sent to another device.xBluetooth virtual COM port for a serverVirtual COM port used when your device is the server, and requests are received from another device. 5.4.2 Creating a virtual COM port 1. Click on the [Printers and Other Hardware] icon in the Control Panel. The [Printers and Other Hardware] window appears.2. Double-click on the [Bluetooth Local COM] icon.
142 The main Bluetooth Local COM window will appear. NoteΗEven when the Control Panel appears in Classic view, please simply click on the [Bluetooth Local COM] icon. oNo such distinction between viewing formats exists in Windows 2000. 3. Click on the [Add...] button.
143 The [Bluetooth Local COM Wizard] window, from where you can create a virtual COM port, will appear. Start from this window when creating Bluetooth virtual COM ports for either servers or clients. 5.4.3 Deleting a virtual COM port NoteΗYou can only delete virtual COM ports created by the Bluetooth Local COM utility.1. Select the port you wish to delete from the [Bluetooth Local COM] window, and then click on the [Delete] button.
144 A message will appear asking you to confirm that you wish to delete the port.2. Click on the [Yes] button. The port will be deleted.3. Click on the [OK] button.
145Chapter 6 Troubleshooting 6.1 General operation of the Bluetooth Utility Bluetooth Manager Q: Bluetooth icon does not appear in task tray. xIf the Bluetooth icon does not appear in the task tray, Bluetooth Manager will not be active, which will prevent you from being able to use any of the functions of the Bluetooth Utility. Start the utilities as instructed below to enable Bluetooth Manager to start automatically and allow all functions to be utilized. Bluetooth Settings(from Windows XP) [Start] > [All Programs] > [Bluetooth] > [Bluetooth Settings] (from Windows 2000) [Start] > [Programs] > [Bluetooth] > [Bluetooth Settings] Remote Camera(from Windows XP) [Start] > [All Programs] > [Bluetooth] > [Remote Camera] (from Windows 2000) [Start] > [Programs] > [Bluetooth] > [Remote Camera] Wireless File Transfer(from Windows XP) [Start] > [All Programs] > [Bluetooth] > [Wireless File Transfer] (from Windows 2000) [Start] > [Programs] > [Bluetooth] > [Wireless File Transfer] Q: Unable to turn on Bluetooth. xIf the wireless communication switch on your PC has been turned off, the message below will appear, and you will not be able to turn the power on from Bluetooth Manager. 6
146 Please confirm whether the wireless communication switch has been turned on. Bluetooth Settings Q: Clicking on the [New Connection] button brings up the message "Unable to prepare Bluetooth." xThe wireless communication switch is turned off. Please switch it on. Q: Remote device(s) cannot be detected xThe other device(s) may have been set to Non-discoverable mode. Please check the mode settings on the device. Q: Services on a remote device are undiscoverable xThe other device may be using a profile that is not supported by the Bluetooth UtilityPlease check the profile being used on the other device. xThe following profiles are compatible with Bluetooth Settings. DUN, FAX, LAP, SPP, HID, HCRP, FTP, OPP, HSP, PAN and BIP Devices running profiles other than those above will not be able to be registered with Bluetooth Settings Bluetooth Information Exchanger Q: Bluetooth Information Exchanger icon does not appear on Desktop xBluetooth Information Exchanger is not active. Please follow the procedure below to start the utility. 1. Right-click on the Bluetooth icon in the task tray 2. Click on [Options] > [Enable Bluetooth Information Exchanger], and then check [Enable Bluetooth Information Exchanger]
147 The Bluetooth Information Exchanger icon will appear on the Desktop. Q: Transfer failed when sending a file using the right-click menu. xFTP or OPP are the sending profiles available when you select a file, right-click it, and then click on [to Bluetooth] to send it. If the destination device does not support either of these profiles, you will not be able to send files using the right-click menu. File transfer will also be unsuccessful if you use FTP to send a file to a device that only supports OPP. In such cases, please click on [Bluetooth] > [Profiles] from [Bluetooth Information Exchanger], and enter the settings shown under Transfer mode. Q: Cannot open shared folder on other device with "File Transfer". xThe other device may have a certain security level enforced (Non-connectable mode etc). Please confirm the security settings of the other device.Please enter the correct password if you are asked to enter one. Remote Camera xSee "Using a camera" Bluetooth Local COM Q: Cannot add portʳxA maximum of 64 virtual COM ports can be added. You will be unable to add another port if 64 ports have already been configured.
1486.2 Using a wireless modem station Q: Modem station cannot be detected. xIf the modem station is connected to and is being used by another device, the modem station will be undetectable even if you search for it. Q: Cannot connect to modem station xIf the modem station is connected to and is being used by another device, no other device will be able to connect to the modem station. Q: Bluetooth passkey entry failed xThe Bluetooth passkey (PIN code) comprises a sequence of alphanumeric characters, with the letters able to be rendered in upper and lower case. If [Caps Lock] is on, the Bluetooth passkey may not be able to be entered correctly.Q: Cannot connect to telephone line xPlease ensure that the telephone cable is connected from the socket to the "LINE" terminal on the modem station. NoteΗIf the telephone cable has come loose because it has not been fully inserted into the socket, the resulting poor contact may prevent data from being transmitted accurately.ΗCommunication will be impossible if the interior of the cable has been broken. Please replace the cable with another one. xPlease ensure that the two slide switches on the underside of the main unit have been set to the "NORMAL" and "MODEM" positions respectively. Q: Cannot connect to the Internet xThe telephone number of the connection (i.e., the telephone number for the access point of your Internet service provider) may not be correct. Please check the telephone number. xThe user ID and/or password for the provider with whom you have signed up may have been entered incorrectly. Please check the user ID and password. xThe default connection may have been configured with different settings. Please set the connection configured for mobile telephone use as the default connection. xWhen you place a call using a company switchboard or other exchange, the system may require you to enter a "0" before the telephone number itself. Please check the type of telephone line you are using.
149Q: Cannot send or receive faxes xOnce you have registered a wireless modem station as your fax server, you will need to enter the fax settings from the [Printer and Faxes] window in the Control Panel. Please refer to "Using a modem station for fax transmissions" for information on the configuration procedure. xThe telephone number of the fax destination may have been entered incorrectly. Please check the telephone number. xIf the setting under COM Auto Connect Settings has been set to "Off", a connection will not automatically be established with the modem. Please connect to the modem manually. xWhen you place a call using a company switchboard or other exchange, the system may require you to enter a "0" before the telephone number itself. Please check the type of telephone line you are using. xThe fax service may not have been enabled for sending (or receiving). Please check the settings by following the procedure below. 1. Open [Printers and Faxes] from the Control Panel, right-click on the [Fax] icon, and then click on [Properties]. The [Fax properties] window will appear.2. Select the [Device] tab, right-click on the modem you wish to use, and then click on [Properties].
1503. Select the [Send] tab, and then confirm that "Enable device to send" has been checked. 4. Select the [Receive] tab, and then confirm that "Enable device to receive" has been checked (when you wish to receive faxes).
1515. Click on the [OK] button.6.3 Using an access point Q: Access point cannot be detected. xIf the access point is connected to and is being used by another device, the access point will be undetectable even if you search for it. Q: Cannot connect to access point. xIf the access point is connected to and is being used by another device, no other device will be able to connect to the access point. Q: Cannot connect to LAN. xThe LAN cable may not be properly connected to the access point. Please check the connection status. NoteΗIf the LAN cable has come loose because it has not been fully inserted into the socket, the resulting poor contact may prevent data from being transmitted accurately.ΗCommunication will be impossible if the interior of the LAN cable has been broken. Please replace the cable with another one.xThe access point may not have been configured correctly, and may not be able to maintain the connection to the LAN.
152Please refer to the product instruction manual for information on how to configure your access point. Q: Cannot connect to the Internet. xIf you are using a LAN to connect to the Internet, the LAN environment of the company or location where you are trying to establish the connection may require you to connect via a proxy server. 6.4 Using a mobile telephone Q: Mobile telephone cannot be detected. xIf the mobile telephone is connected to and is being used by another device, the mobile telephone will be undetectable even if you search for it. Q: Cannot connect to mobile telephone. xIf the mobile telephone is connected to and is being used by another device, no other device will be able to connect to the mobile telephone. Q: Cannot send images to mobile telephone. xPlease use the appropriate transfer method, according to the profiles supported by your mobile telephone. If OPP is supported: right-click on a file to send it If BIP is supported: use "Image transfer" under Bluetooth Information Exchanger to send images Q: Cannot connect to the Internet. xThe telephone number of the connection (i.e., the telephone number for the access point of your Internet service provider) may not be correct. Please check the telephone number. xThe user ID and/or password for the provider with whom you have signed up may have been entered incorrectly. Please check the user ID and password. xThe default connection may have been configured with different settings. Please set the connection configured for mobile telephone use as the default connection. Q: Cannot send or receive faxes. xOnce you have registered a mobile telephone as your fax server, you will need to enter the fax settings from the [Printer and Faxes] window in the Control Panel.
153Please refer to "Using a modem station for fax transmissions" for information on the configuration procedure. xThe telephone number of the fax destination may have been entered incorrectly. Please check the telephone number. xIf the setting under COM Auto Connect Settings has been set to "Off", a connection will not automatically be established with the modem. Please connect to the mobile telephone manually. xThe fax service may not have been enabled for sending (or receiving). Please check the settings by following the procedure below. 1. Open [Printers and Faxes] from the Control Panel, right-click on the [Fax] icon, and then click on [Properties]. The [Fax properties] window will appear.2. Select the [Device] tab, right-click on the modem you wish to use, and then click on [Properties] .
1543. Select the [Send] tab, and then confirm that "Enable device to send" has been checked. 4. Select the [Receive] tab, and then confirm that "Enable device to receive" has been checked when you wish to receive faxes).
1555. Click on the [OK] button.6.5 Using a PDA Q: Cannot make an ActiveSync connection. xPlease confirm that you have installed ActiveSync v3.7 or higher on your PC. xActiveSync is installed to COM7 as a default. Please refer to "Synchronizing data with a PDA" and re-configure your ActiveSync connection. If a port other than COM7 has been used, please amend the ActiveSync connection settings accordingly. Q: Cannot locate a saved file. xThe type of file sent to your PDA, as well as the profile used to send the file, may affect where folders saved on your PDA are located. Examples: Images transferred to your PDA using "Image transfer" > saved in the "Image transfer" folder Images transferred to your PDA using "File transfer" > saved in the "Shared folder"6.6 Using a camera Q: Camera cannot be detected.
156xIf the camera is connected to and is being used by another device, the camera will be undetectable even if you search for it. Q: Cannot connect to camera. xIf the camera is connected to and is being used by another device, no other device will be able to connect to the camera. Q: Images from the camera can be displayed, but no pictures can be taken. xThe memory card in the camera may be full. Please make a backup of all your necessary data on alternative media, then delete the images from the memory card, and ascertain how much free space remains.Q: Camera images do not appear in window. xThe camera may not have been set to remote camera mode (image browse mode, configuration mode, etc). Certain cameras will end the Bluetooth connection automatically if you change the settings in a mode other than remote camera mode. Please re-connect to the camera when you next wish to use the device in remote camera mode. 6.7 Using a Bluetooth Headset Q: Bluetooth Headset cannot be detected. xIf the Bluetooth Headset is connected to and is being used by another device, the Bluetooth Headset will be undetectable even if you search for it. Q: Cannot connect to Bluetooth Headset. xIf the Bluetooth Headset is connected to and is being used by another device, no other device will be able to connect to the Bluetooth Headset. xA Bluetooth connection will be impossible if the Bluetooth Headset is connected to a power adaptor. Please remove the power adaptor and re-connect. Q: Sound cuts out/cannot hear anything. xUsing a Bluetooth headset with other Bluetooth devices may cause problems such as interruptions in sound, reduced transfer speed or failure during file transfer, and disconnection of the other Bluetooth devices. We strongly recommend using a Bluetooth headset on its own and not in connection with other Bluetooth devices.
157xPlease confirm that the Bluetooth Headset is being operated correctly (for example, ensure that the correct mode (audio or communications) mode has been selected). xPlease confirm that the voice file or CD is being played back normally on your PC.xPlease check the volume settings on your Bluetooth Headset and PC. xIf Windows Media Player or another audio-related application is active when you try to connect your Bluetooth Headset, you may find it impossible to connect properly to the Bluetooth Headset, or even to use it at all. Please start such applications after you have connected to the Bluetooth Headset.
158Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu