Belkin F8V9017 Bluetooth Headset User Manual P74192 Bluetooth HF man

Belkin International, Inc. Bluetooth Headset P74192 Bluetooth HF man

UserManual.wiki >

F8V9017 User Manual

User Manual

Experience the freedom of wireless communicationBluetooth™Hands-Free HeadsetFor use with mobilephones enabled withBluetooth™technology. F8V9017User Manual

Table of ContentsImportant Information for Safe Use ..............................................2Introduction ................................................................................5Operation Modes ..........................................................................6Controls and Functions..................................................................7Operation ..................................................................................12Appendix – A ............................................................................19Regulatory Notices..................................................................19Federal Communications Commission Notices............................19Canadian Notice......................................................................20European Community Notice ....................................................21Wireless Notice ......................................................................221

Important Information for Safe Use Note: Read this information before using the Bluetooth Hands-Free Headset.To avoid the risk of product malfunction, product damage, or personal injury, take care toobserve these safety precautions and always use the Bluetooth Hands-Free Headsetaccording to the instructions for use. Headset Care• Never expose to liquid or immerse in water, avoid excessive humidity.• Do not attempt to disassemble the Headset; it contains no user-serviceable parts. Therechargeable battery is pre-installed and ready for use.• Do not drop or throw the Headset and protect it from environments that couldscratch it. Use only a soft cloth to clean it.• Do not expose the Headset to extremes of temperature.• Never expose the Headset to open flames and do not dispose of in a fire.• Do not allow children to play with the Headset. It contains small parts that coulddetach to create a choking hazard.2

Important Information for Safe Use (continued)Driving• Check the regulations affecting the use of hands-free devices where you drive. Onlyuse the Headset when and where it is safe to do so.Operation in Special Environments• Medical equipment and hospitals: Due to the risk of interference with medicalequipment, do not use the Headset or a mobile phone nearby without permission.• Aircraft: To avoid interference with communication systems, turn the Headset OFFwhen required to do so by airline regulations. Never use the Headset while in the air.• If you are unsure if radio-transmitting equipment is allowed in any area, seekauthorization before turning the Headset ON.Charging• Only use the charger supplied with the Headset to charge the product to avoid risk ofdamage or personal injury.• The charger can only be disconnected by unplugging, so it is recommended to onlyuse a power socket easily accessible.3

Important Information for Safe Use (continued)Charging (continued)• Ensure the charger is compatible with the AC supply available before attempting toplug it in.• The charger is for indoor use only. Never expose to liquid or immerse in water, avoidexcessive humidity.Environmental Care• Please observe local regulations regarding the disposal of your packaging materialsand the product itself. Where possible, promote their recycling.• This product contains a rechargeable NiMH battery.4

Operation ModesOperation ModesPIN Code: Keep the 4-digit PIN code information supplied with the Headset in a safeplace. It is unique to your Headset. It will be needed for pairing.The Headset supports these modes of operation:• OFF—the Headset is off and cannot receive or make a connection.• STANDBY—the Headset is ready to receive or make a connection from a paired devicewithin range.• INCOMING CALL—the Headset is ready to answer a call being received.• TALK—the Headset is actively connected to another device and communication canbe made, after answering or initiating a call.• PAIRING—this is a special mode used to “pair” the Headset ready for use with acompanion device such as a mobile phone.• CHARGING—the Headset can be charged by connecting the charger supplied.6

Controls and FunctionsKeypad• One push button to switch theHeadset on/off, to select PAIRINGmode, or to initiate or answer a call• Two switches to control receive-volume7LED indicatorVolume +MainmultifunctionbuttonVolume -Charging connectorMicrophoneShown configured for wearing on the right ear.

Controls and Functions (continued)Key PressKey Press Effect in Current ModeOFF PAIRING STANDBY INCOMING TALKCALL8Short(more than0.5 sec.and lessthan 3sec.)Medium(3–10sec.)Long (more than 10 sec.)Switch onand go intoSTANDBYmodeSwitch onand go intoPAIRINGmodeExit PAIRINGmode and goto STANDBYExit PAIRINGmode, resetPAIRINGdata andswitch OFFInitiate acallSwitch OFFHeadsetAnswer a callSwitch OFFHeadsetEnd currentcall(Not possiblewhenmicrophoneis muted)Mute and un-mute themicrophoneMute and un-mute themicrophone

Controls and Functions (continued)9Volume ButtonsThese buttons allow the user to select a receive-volume from eight levels. A short pressis used to increase or decrease volume one step. If the key is kept pressed, the volumeis increased or decreased until it is released. A short tone indicates the current volume level.

Controls and Functions (continued)10RedGreenRed andGreenSteady ONSwitchedOFF and oncharge,battery lowSwitchedOFF and oncharge,battery lowAlternateBlinking PAIRINGmodeSlowFlashingSTANDBYmode andbattery lowSTANDBYmode andbattery highFastFlashingTALK orINCOMINGCALL andbattery lowTALK orINCOMINGCALL andbattery highFastFlashingwith 2BlinksTALK andmuted andbattery lowTALK andmuted andbattery highSteadyOFFOFF modeLED Color Effect in Current ModeLED IndicatorA red/green LED is used to indicate various functions.Note: When on charge with the Headset not switched OFF, the LED flashing sequence isnot changed, but the LED color will change from red to green as the battery reaches full charge.

Controls and Functions (continued)SoundsIn order to make operation easier, the Headset generates several sounds:Switch-on toneSwitch-off tonePairing toneReset toneConfirmation tone11Error toneAlert toneMute toneRing tone

OperationOperationRefer to the “Important Information for Safe Use” section above for important safetyinformation before use.Charging Before First UseThe Headset will not be fully charged when it is unpacked. It is recommended to place it on charge for five hours before first use; the charging section describes how to do this.Wearing the Headset• The Headset can be worn on either ear, by changing the orientation of the ear hook.• To remove the ear hook, carefully lever it from the back of the Headset by hand.• The ear hook can be replaced either way up. Note the indentation in the center toproperly orient the ear hook on the Headset.• With the user controls facing the user and the LED at the top, the closed loop of theear hook should “point” right for operation on the right ear, and left for the left ear. • To place on the ear, hold the Headset in the hand and push the open end of thehook slightly away from the Headset body.12

Operation (continued)• Slide the open end of the ear hook onto the ear from the front. It will tend to lock inposition with a slight twisting motion.• The ear hook is malleable for further slight adjustment.Switching On1. Press the main button until a short tone is heard in the earpiece.2. Release the button. The Headset will generate the switch-on melody in the earpiece.3. The LED will flash the signal to indicate the Headset is now in STANDBY mode readyto be paired, or if already paired, ready to make or receive a call.Switching Off1. Press the main button until a short tone is heard in the earpiece.2. Release the button. The Headset will generate the switch-off melody.3. The LED will stop flashing.13

Operation (continued)Preparing the Headset for Use—PairingPIN Code: The PIN code for the Headset is preset to 1234. It will be needed for pairing. Before the Headset can communicate, it must be paired to the companion device it willbe used with, such as a mobile phone. This is to ensure the Headset only communicateswith the device chosen by the user and not any other Bluetooth devices in range.Pairing information is stored by the Headset and can be changed at any time.The exact process to pair the Headset will also depend on the device it is paired with.The user manual for that device will give instructions on how to do this. In all cases,the Headset will need to be put into PAIRING mode, which is described here:1. If the Headset is on, switch it off.2. Press and hold the main button.3. When the short tone is heard, keep the button pressed until the pairing melody is generated.14

Operation (continued)4. The LED will alternately flash red/green.5. Follow instructions for the companion device to pair to the Headset.6. When prompted on the companion device, enter the PIN code for the Headset.7. When paired, the Headset will give a short confirmation tone and switch to STANDBY,ready for operation.Receiving and Ending a Call• To receive a call, the Headset must be in STANDBY mode.• When a call is received, the Headset will generate a ringing signal in the earpiece. • The call may be answered by a short press of the main button.• The connection will be made to the companion device, and in the case of a mobilephone, the call will be answered.• During a call, when in TALK mode, the microphone may be muted and un-muted by amedium press of the main button.• A short press of the main button will end a call.• If the Headset is muted, it is necessary to un-mute with a medium button pressbefore ending the call. This avoids accidentally ending a call when trying to un-mute.15

Operation (continued)Initiating a Call• When in STANDBY mode, a short press will initiate a connection to the companion device.• For example, this could be used to initiate a call with a mobile phone.• During a call, when in TALK mode, the microphone may be muted and un-muted by a medium press of the main button.• A short press of the main button will end a call.• If the Headset is muted, it is necessary to un-mute with a medium button pressbefore ending the call. This avoids accidentally ending a call when trying to un-mute.Operation—In and Out of RangeThe Headset is designed for use within a few meters of the companion device, typicallya range of up to 10 meters can be expected. When approaching the limit of usablerange, short breaks may be heard in the audio.If the Headset moves out of range during a call, the connection will be terminated andthe Headset will return to STANDBY mode.16

Operation (continued)Battery StatusThe LED will flash in TALK, muted, and STANDBY mode. When the battery has adequatecharge, this will be with a green color, changing to red when the battery is low.ChargingThe Headset is supplied with a charger to recharge the internal battery. Do not attemptto use any other charger and refer to the “Important Information for Safe Use” sectionabove for important safety information.• To charge, plug the charger into an available AC supply socket and plug the smallconnector on the charging lead into the matching socket near the microphone.• The Headset is normally charged in OFF or STANDBY modes. Charging is not active inTALK mode. • With the Headset turned OFF, the LED will show a steady red indication until theHeadset is charged.• If the Headset is in any other mode when connected to the charger, the LED flashingsequence does not change, but the LED color will indicate the charge status.17

Operation (continued)• Sometimes, when the Headset is placed on charge with the LED still showing a greencolor, the LED color may change initially from green to red. This is normal andindicates the Headset is not yet fully charged immediately after connecting thecharger.• The charge time is approximately five hours from discharged to fully charged.Troubleshooting—Product Reset• If the Headset stops operating, first ensure it is charged by charging it for five hours.• If the Headset remains non-functional, it may be reset by the following method:Press and hold the volume-down button, and at the same time, plug in the charger as though to place the unit on charge.• The Headset will reset itself and be left in OFF mode.18

Appendix – ARegulatory NoticesTo identify this product, refer to the part or model number on the product label.For customer support and for regulatory issues, contact Belkin at 1-800-2BELKIN.Federal Communications Commission NoticesThis equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected. 19

Appendix – A• Consult the dealer or an experienced radio/TV technician for help.We, Belkin Components, of 501 West Walnut Street, Compton, CA 90220, declare underour sole responsibility that the product,F8V9017to which this declaration relates, complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation.ModificationsThe FCC requires the user to be notified that any changes or modifications made to thisdevice that are not expressly approved by the manufacturer may void the user’sauthority to operate the equipment.Canada- Industry Canada (IC)The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada.This Class B digital complies with Canadian ICES-003.20

Appendix – AEuropean Community NoticeHereby, Belkin Corporation declares that this Bluetooth Hands-Free Headset is incompliance with the essential requirements and other relevant provisions of Directive1999/5/EC.Products bearing the CE marking comply with the R&TTE Directive (1999/5/EC), EMCDirective (89/336/EEC), and the Low Voltage Directive (73/23/EEC) issued by thecommission of the European Community Compliance with these directives impliesconformity to the following European Norms (in parentheses are the equivalentinternational standards and regulations):• EN 60950 (IEC60950) – Product Safety• ETS 300 328 – Technical requirements for radio equipment• EN 301 489-17 – General EMC requirements for radio equipmentThis product may be used in all EU and EFTA countries.21

Appendix – AWireless NoticeIn some situations or environments, the use of wireless devices may be restricted. Suchrestrictions may apply aboard airplanes, in hospitals, near explosives, in hazardouslocations, etc. If you are uncertain of the policy that applies to the use of this device,please ask for authorization to use it prior to turning it on.22

Belkin Components501 West Walnut StreetCompton • CA • 90220 • USATel: 310.898.1100Fax: 310.898.1111Belkin Components, Ltd.Express Business ParkShipton Way • Rushden • NN10 6GLUnited KingdomTel: +44 (0) 1933 35 2000Fax: +44 (0) 1933 31 2000Belkin Components B.V.Starparc Building • Boeing Avenue 3331119 PH Schiphol-Rijk • The NetherlandsTel: +31 (0) 20 654 7300Fax: +31 (0) 20 654 7349Belkin Components, Ltd.7 Bowen Cresent • West GosfordNSW 2250 • AustraliaTel: +61 (0) 2 4372 8600Fax: +61 (0) 2 4325 4277Tech SupportUS: 310.898.1100 ext. 2263800.223.5546 ext. 2263310.604.2089 (fax)techsupp@belkin.comEurope: 00 800 223 55 460eurosupport@belkin.com© 2002 Belkin Components. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.belkin.com

Navigation menu