Belkin F8T060XHDST BLUETOOTH HEADSET User Manual P74500 F8T061 man

Belkin International, Inc. BLUETOOTH HEADSET P74500 F8T061 man

UserManual.wiki >

F8T060XHDST User Manual

USERS MANUAL

Bluetooth™ Hands-Free HeadsetBluetooth™ Hands-Free HeadsetBelkin Tech SupportUS: 877.736.5771 310.898.1100 ext. 2263Europe: 00 800 223 55 460Australia: 1800 666 040Belkin Corporation501 West Walnut StreetCompton • CA • 90220 • USATel: 310.898.1100Fax: 310.898.1111Belkin Components, Ltd.Express Business Park • Shipton WayRushden • NN10 6GL • United KingdomTel: +44 (0) 1933 35 2000Fax: +44 (0) 1933 31 2000Belkin, Ltd.7 Bowen Crescent • West GosfordNSW 2250 • AustraliaTel: +61 (0) 2 4372 8600Fax: +61 (0) 2 4372 8603Belkin Components B.V.Starparc Building • Boeing Avenue 3331119 PH Schiphol-Rijk • The NetherlandsTel: +31 (0) 20 654 7300Fax: +31 (0) 20 654 7349© 2004 Belkin Corporation. All rights reserved. All trade names are registeredtrademarks of respective manufacturers listed. The Bluetooth name and theBluetooth trademarks are owned by Bluetooth SIG, Inc., and are used by Belkin Corporation under license.belkin.comP74500 F8T061P74500_F8T061_man.qxd 1/13/04 4:28 PM Page 1

SpecificationsModel: F8T061Bluetooth Compliance: Version 1.1Operating Frequency: 2.4 to 2.4835GHzSpread Spectrum: FHSS (Frequency Hopping Spread Spectrum)Modulation: GFSK (Gussian Frequency Shift Keying)RF Output: 0 dBm, Class 2Sensitivity: < 0.1% BER at -81 dBmFrequency Stability: +/- 10PPMOperation Range: 10m (33 ft.)*Design: Left and right earBattery: Rechargeable lithium polymerSystem Requirements Compatible with all phones enabled with Bluetooth v1.1,including, but not limited to:• Sony Ericsson®T610, T616, T618, T68i, P800• Nokia®3650, 3600, 6310, 6310i, 8910, 8910i, 6600, N-Gage™• Philips®Fisio®820, 825• Ericsson®T39m, T68mPackage Contents• Bluetooth Hands-Free Headset• Desktop Charger• SoftHold moldable ear hook with 3 interchangeable earplugs• 5V DC, 300mA Power Supply• User Manual• Registration Card3Introductionsection12345Introduction2P74500_F8T061_man.qxd 1/13/04 4:28 PM Page 2

Supported ProfilesThe services supported by your Headset are defined as“Profiles”. Available Profiles include:• Hands-Free• HeadsetAntenna: Integrated, 0 +/- adbiLED Indicator: Power/PairingCharger: 5.0V DC, 300mATypical Power Consumption: TX: 150mA, Rx 80mADimensions: 64mm (L) x 22mm (W) x 8mm (H)Weight: 0.8oz.*10m range is dependent upon environment, number ofusers, and other wireless devices within immediate proximity.Specifications are subject to change without notice.5Introductionsection12345Introduction4P74500_F8T061_man.qxd 1/13/04 4:28 PM Page 4

Getting to Know your Hands-Free Headset6Status IndicatorsLED Status5 quick blue flashes Headset is beingturned on5 quick red flashes Headset is beingturned offContinues blue/red flashing Headset is in pairing modeFlashes blue once every 3 seconds Headset paired but not active3 quick blue flashes every 3 seconds Headset paired and active7Getting to Know your Hands-Free Headsetsection12345LED WindowToggle:- Talk- On-Off- Volume up-down- PairingSoftHold Moldable Ear HookInterchangeable EarplugP74500_F8T061_man.qxd 1/13/04 4:28 PM Page 6

8Before you BeginWarning: The Bluetooth Hands-Free Headsetand charger have magnets in them that allowthem to dock with each other. Keep magnets atleast two feet away from computer hard drives,and other magnetic storage media, monitors,televisions, VCRs, videotapes, cameras, camerafilm, credit cards, etc.For Technology-Enabled PhonesThe Bluetooth Hands-Free Headset is compatible withBluetooth phones (version 1.1 phones).Check for phone compatibility on page 2, or check with yourphone manufacturer to ensure Bluetooth compatibility.9Before you Beginsection12345Charge your HeadsetYour Bluetooth Hands-Free Headset is equipped with arechargeable lithium polymer battery and must be chargedprior to use.1. Plug one end of the power adapter into the desktopcharger and the other end into an available 110VACelectrical outlet.2. Insert the Headset into the desktop charger. Thecharging indicator on the charger will illuminate red.3. Charge the Headset for approximately two hours or untilthe red charger indicator light goes out.Note: The red indicator light will be on while the Headset ischarging and will turn off when charging is complete.Bluetooth P74500_F8T061_man.qxd 1/13/04 4:28 PM Page 8

1234510Adjust the EarpieceThe SoftHold earpiece was designed to comfortably fitaround the left or right ear. You may change the position ofthe earpiece simply by flipping the earpiece and snapping itinto place as described below.Before you Begin11Before you BeginsectionChanging the Ear PlugsThe Headset includes three interchangeable earplugs thatare designed to fit common ear types. Select the earplugthat fits the most comfortably for your ear type.P74500_F8T061_man.qxd 1/13/04 4:28 PM Page 10

Pairing to a Technology-Enabled PhonePairing Process for Nokia 6310 and 6310i1. Ensure that your Headset is turned off.2. Press and hold down the talk button. After approximatelyeight seconds, the blue light will flash five times, indicatingthe Headset is powered on. Do not release the button untilyou see an alternating blue and red light. This indicatesthe Headset is in pairing mode. 3. Select “Menu” and then go to “Bluetooth”.4. Make sure your Bluetooth capability is turned ON.5. Scroll down to “Search for Audio Accessories”.6. Your phone will find the Belkin Headset and list it under“Found Devices”.12345Bluetooth 12Pairing Instructions for Popular BluetoothTechnology-Enabled PhonesFor specific instructions to pair your phone, find your modelbelow or refer to your mobile telephone user guide.Note: For security purposes, the Headset will remain inpairing mode for 60 seconds. If the paring process is notcompleted within 60 seconds, you will have to redo theentire pairing procedure.Pairing to a Technology-Enabled PhoneBluetooth 13sectionP74500_F8T061_man.qxd 1/13/04 4:28 PM Page 12

Pairing Process for Nokia 3650 and N-Gage1. Ensure that your Headset is turned off.2. Press and hold down the talk button. After approximatelyeight seconds, the blue light will flash five times, indicatingthe Headset is powered on. Do not release the buttonuntil you see an alternating blue and red light. This indicatesthe Headset is in pairing mode.3. Select “Menu” and then go to the “Tools” folder.4. Select “Bluetooth”.5. Make sure your Bluetooth capability is turned ON.6. Scroll to the “Paired Devices” tab and select “Options”.7. Under “Options” select “New Paired Devices”.15Pairing to a Technology-Enabled Phonesection12345Bluetooth 7. Select “Belkin Headset” to initiate the pairing.8. Enter the passkey or pin “0000” (4 zeros). You shouldsee the LED lights switch from flashing blue/red toflashing blue every three seconds.9. Your Headset is now ready to use.Pairing to a Technology-Enabled Phone14Bluetooth P74500_F8T061_man.qxd 1/13/04 4:28 PM Page 14

17Pairing to a Technology-Enabled Phonesection12345Bluetooth 8. Your phone will search and find the “Belkin Headset”.9. Select “Belkin Headset” to initiate the pairing.10. Enter the passkey or pin “0000” (4 zeros). You shouldsee the LED lights switch from flashing blue/red toflashing blue every three seconds.11. Exit the Menu.12. On your Headset, initiate a connection to your mobilephone by pushing the talk button once. After a fewseconds you will be asked on your mobile phone toaccept a connection from the Bluetooth Headset. 13. Your Headset is now ready to use.Pairing to a Technology-Enabled Phone16Bluetooth Pairing Process for Sony Ericsson T68i1. Ensure that your Headset is turned off.2. Press and hold down the talk button. After approximatelyeight seconds, the blue light will flash five times, indicatingthe Headset is powered on. Do not release the buttonuntil you see an alternating blue and red light. This indicatesthe Headset is in pairing mode.3. Go to the Menu screen for your T68i.4. Select the “Connect” icon, then select “Bluetooth”.5. Go to “Paired Devices” and “Add a Device”.6. Select “Phone Initiates”.7. Select “Hands-Free” (make sure your Headset isflashing blue/red).P74500_F8T061_man.qxd 1/13/04 4:28 PM Page 16

Pairing Process for Sony Ericsson T610, T616, T6181. Ensure that your Headset is turned off.2. Press and hold down the talk button. After approximatelyeight seconds, the blue light will flash five times, indicatingthe Headset is powered on. Do not release the buttonuntil you see an alternating blue and red light. Thisindicates the Headset is in pairing mode. 3. Go to the Menu screen for your T610 series.4. Select the “Connect” icon, then select “Bluetooth”. 5. Select “Hands-free Devices”. 6. Select “My Hands-free” and “Add a new hands-free device”.7. Your phone will find the “Belkin Headset” and list itunder “Found Devices”.12345Bluetooth 8. Your phone will find the Headset and list it under“Found Devices”.9. Select “Belkin Headset” to initiate the pairing.10. Enter the passkey or pin “0000” (4 zeros). You shouldsee the LED lights switch from flashing blue/red toflashing blue every three seconds.11. Your Headset is now ready to use.Pairing to a Technology-Enabled Phone18Bluetooth 19Pairing to a Technology-Enabled PhonesectionP74500_F8T061_man.qxd 1/13/04 4:28 PM Page 18

12345Bluetooth 8. Select “Belkin Headset” to initiate the pairing.9. Enter the passkey or pin “0000” (4 zeros). You shouldsee the LED lights switch from flashing blue/red toflashing blue every three seconds.10. Your Headset is now ready to use.Pairing to a Technology-Enabled Phone20Bluetooth Pairing Process for Sony Ericsson P8001. Ensure that your Headset is turned off.2. Press and hold down the talk button. After approximatelyeight seconds, the blue light will flash five times, indicatingthe Headset is powered on. Do not release the buttonuntil you see an alternating blue and red light. This indicatesthe Headset is in pairing mode.3. From the application selection screen, select “Control Panel”.4. Select the “Connections” tab, then select “Bluetooth”from the list.5. Select the “Settings” tab and bring down the “OperationMode” drop-down menu.21Pairing to a Technology-Enabled PhonesectionP74500_F8T061_man.qxd 1/13/04 4:28 PM Page 20

12345Bluetooth 6. Select “Auto”, then select the “Add” button.7. Once you’ve done this, the P800 will detect all thediscoverable Bluetooth devices within its range.8. Once the P800 has detected your “Belkin Headset”,select it and when prompted for the passkey, enter“0000” and select “Done”.9. You have now successfully paired your BluetoothHands-Free Headset with your P800 phone.10. You may select the “Done” button to return to theControl Panel.Pairing to a Technology-Enabled Phone22Bluetooth Using your HeadsetSwitching the Headset On and OffTo turn your Headset on, remove the Headset from thedesktop charger, then press and hold the talk button untilthe LED indicator flashes blue five times. The LED indicatorwill flash blue every three seconds while the Headset is on.To turn your Headset off, press and hold the talk button untilthe LED indicator flashes red five times.Fitting the HeadsetDecide which side of your head you will wear the Headseton, and use your hand on that side to slide the ear hookgently over and around your ear in a circular motion. Adjustthe ear hook to your ear by molding it around the contour ofyour ear. 23Pairing to a Technology-Enabled PhonesectionP74500_F8T061_man.qxd 1/13/04 4:28 PM Page 22

Volume ControlRight-ear users:To increase the volume on the Headset, push the togglebutton upward.To decrease the volume on the Headset, push the togglebutton downward.Left-ear users:To increase the volume on the Headset, push the togglebutton downward.To decrease the volume on the Headset, push the togglebutton upward.12345Bluetooth Answering a CallTo answer a call, wait until your Headset rings, then pressthe talk button once to answer.Ending a CallTo end a call, press the talk button at any time during aphone call.Making a CallTo make a call, dial using your mobile phone.Voice Dialing If your mobile phone allows voice dialing, push the talkbutton to initiate it through your Headset.Pairing to a Technology-Enabled Phone24Bluetooth 25Pairing to a Technology-Enabled PhonesectionP74500_F8T061_man.qxd 1/13/04 4:28 PM Page 24

accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct theinterference by one or more of the following measures:•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuitdifferent from that to which the receiver is connected.•Consult the dealer or an experienced radio/TVtechnician for help.section12345Regulatory NoticesTo identify this product, refer to the part or model numberon the product label.For customer support and for regulatory issues, contactBelkin at 1-800-2BELKIN.Federal Communications Commission NoticesThis equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in26InformationInformation27P74500_F8T061_man.qxd 1/13/04 4:28 PM Page 26 Reorient or relocate the receiving antenna Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.FCC ID: K7SF8T060xHDST

Canada-Industry Canada (IC)The wireless radio of this device complies with RSS 139 &RSS 210 Industry Canada. This Class B digital complies withCanadian ICES-003.European Community NoticeHereby, Belkin Corporation declares that this BluetoothHands-Free Headset is in compliance with the essentialrequirements and other relevant provisions of Directive1999/5/EC.section12345InformationWe, Belkin Corporation, of 501 West Walnut Street, Compton,CA 90220, declare under our sole responsibility that the product,Model: F8T061This device complies with Part 15 of the FCCRules. Operation is subject to the following two conditions: (1) thisdevice may not cause harmful interference, and (2) this devicemust accept any interference received, including interference thatmay cause undesired operation.ModificationsThe FCC requires the user to be notified that any changes ormodifications made to this device that are not expresslyapproved by the manufacturer may void the user’s authorityto operate the equipment.Information2928P74500_F8T061_man.qxd 1/13/04 4:29 PM Page 28

Wireless NoticeIn some situations or environments, the use of wireless devicesmay be restricted. Such restrictions may apply aboard airplanes,in hospitals, near explosives, in hazardous locations, etc. If youare uncertain of the policy that applies to the use of this device,please ask for authorization to use it prior to turning it on.31section12345Products bearing the CE marking comply with the R&TTEDirective (1999/5/EC), EMC Directive (89/336/EEC), and theLow Voltage Directive (73/23/EEC) issued by the commissionof the European Community Compliance with these directivesimplies conformity to the following European Norms (in parenthesesare the equivalent international standards and regulations):•EN 60950 (IEC60950) – Product Safety•ETS 300 328 – Technical requirements for radio equipment•EN 301 489-17 – General EMC requirements for radio equipmentThis product may be used in all EU and EFTA countries.30InformationInformationP74500_F8T061_man.qxd 1/13/04 4:29 PM Page 30The antenna(s) used for this transmitter must not be co-located or operating in conjuction with any other antenna or transmitter.

Navigation menu