Belkin F5D7630-4A ADSL Modem with Built-in Wireless Router User Manual 23MS293 F5D7630 4A man

Belkin International, Inc. ADSL Modem with Built-in Wireless Router 23MS293 F5D7630 4A man

Contents

User Manual Part 2

41UNDERSTANDING THE WEB-BASED USER INTERFACERestarting the Router to Restore Normal Operation1. Click the “Restart Router” button.2. The following message will appear. Click “OK” to restart your Router.Restore Factory DefaultsUsing this option will restore all of the settings in the Router to the factory(default) settings. It is recommended that you back up your settings before yourestore all of the defaults.1. Click the “Restore Defaults” button.2. The following message will appear. Click “OK” to restore factory defaults.
42UNDERSTANDING THE WEB-BASED USER INTERFACESaving/Backup Current SettingsYou can save your current configuration by using this feature. Saving yourconfiguration will allow you to restore it later if your settings are lost orchanged. It is recommended that you back up your current configuration beforeperforming a firmware update.1. Click “Save”. A window called “File Download” will open. Click “Save”.2. A window will open that allows you to select the location in which to savethe configuration file. Select a location. There are no restrictions on the filename, however, be sure to name the file so you can locate it yourself later.When you have selected the location and entered the file name, click “Save”.
43UNDERSTANDING THE WEB-BASED USER INTERFACE3. When the save is complete, you will see the window below. Click “Close”.The configuration is now saved.Restore Previous SettingsThis option will allow you to restore a previously saved configuration.1. Click “Browse”. A window will open that allows you to select the location ofthe configuration file. All configuration files end with a “.bin”. Locate theconfiguration file you want to restore and double-click on it.2. Then, click “Restore”.
44UNDERSTANDING THE WEB-BASED USER INTERFACEFirmware UpdateFrom time to time, Belkin may release new versions of the Router’s firmware.Firmware updates contain feature improvements and fixes to problems that mayhave existed. When Belkin releases new firmware, you can download the firmwarefrom the Belkin update website and update your Router’s firmware to the latestversion.Updating the Router’s Firmware1. In the “Firmware Update” page, click “Browse”. A window will open that allowsyou to select the location of the firmware update file.2. Browse to the firmware file you downloaded. Select the file by double-clickingon the file name.3. Click “Update” to upgrade to the latest firmware version.System SettingsThe “System Settings” page is where you can enter a new administrator password,set the time zone, enable remote management, and turn on and off the UPnPfunction of the Router.
45UNDERSTANDING THE WEB-BASED USER INTERFACESetting or Changing the Administrator Password The Router ships with NO password entered. If you wish to add a password forgreater security, you can set a password here. Write down your password andkeep it in a safe place, as you will need it if you need to log into the Router inthe future. It is also recommended that you set a password if you plan to use theremote management feature of your Router.Changing the Login Time-Out SettingThe login time-out option allows you to set the period of time that you can belogged into the Router’s advanced setup interface. The timer starts when therehas been no activity. For example, you have made some changes in the advancedsetup interface, then left your computer alone without clicking “Logout”.Assuming the time-out is set to 10 minutes, then 10 minutes after you leave, thelogin session will expire. You will have to login to the Router again to make anymore changes. The login time-out option is for security purposes and the defaultis set to 10 minutes.Note: Only one computer can be logged into the Router’s advanced setup interfaceat one time.Setting the Time and Time Zone The Router keeps time by connecting to a Simple Network Time Protocol (SNTP)server. This allows the Router to synchronize the system clock to the globalInternet. The synchronized clock in the Router is used to record the security logand control client filtering. Select the time zone that you reside in. The systemclock may not update immediately. Allow at least 15 minutes for the Router tocontact the timeservers on the Internet and get a response. You cannot set theclock yourself.
46UNDERSTANDING THE WEB-BASED USER INTERFACEEnabling Remote Management Before you enable this advanced feature of your Belkin Router, MAKE SURE YOUHAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you tomake changes to your Router’s settings from anywhere on the Internet. There aretwo methods of remotely managing the Router. The first is to allow access to theRouter from anywhere on the Internet by selecting “Any IP address can remotelymanage the Router”. By typing in your WAN IP address from any computer on theInternet, you will be presented with a login screen where you need to type in thepassword of your Router. The second method is to allow a specific IP address onlyto remotely manage the Router. This is more secure, but less convenient. To usethis method, enter the IP address you know you will be accessing the Routerfrom in the space provided and select “Only this IP address can remotely managethe Router”. Before you enable this function, it is STRONGLY RECOMMENDED thatyou set your administrator password. Leaving the password empty will potentiallyopen your Router to intrusion.
47UNDERSTANDING THE WEB-BASED USER INTERFACEEnabling/Disabling UPnPUPnP (Universal Plug-and-Play) is yet another advanced feature offered by yourBelkin Router. It is a technology that offers seamless operation of voicemessaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Router’s firewall to be configured in aspecific way to operate properly. This usually requires opening TCP and UDPports, and in some instances, setting trigger ports. An application that is UPnP-compliant has the ability to communicate with the Router, basically “telling” theRouter which way it needs the firewall configured. The Router ships with theUPnP feature disabled. If you are using any applications that are UPnP-compliant, and wish to take advantage of the UPnP features, you can enable theUPnP feature. Simply select “Enable” in the “UPnP Enabling” section of the“Utilities” page. Click “Apply Changes” to save the change.
48MANUALLY CONFIGURING NETWORK SETTINGSSet up the computer that is connected to the ADSL modem FIRST using thesesteps. You can also use these steps to add computers to your Router after theRouter has been set up to connect to the Internet.Manually Configuring Network Settings in Mac OS up to 9.x1. Pull down the Apple menu. Select “Control Panels” and select “TCP/IP”.2. You will see the TCP/IP control panel. Select “Ethernet Built-In” or “Ethernet”in the “Connect via:” drop-down menu (1).123. Next to “Configure” (2), if “Manually” is selected, your Router will need to beset up for a static IP connection type. Write the address information in thetable below. You will need to enter this information into the Router.
MANUALLY CONFIGURING NETWORK SETTINGS4. If not already set, at “Configure:”, choose “Using DHCP Server”. This will tellthe computer to obtain an IP address from the Router. 5. Close the window. If you made any changes, the following window will appear.Click “Save”.Restart the computer. When the computer restarts, your network settings are nowconfigured for use with the Router.Manually Configuring Network Settings in Mac OS X 1. Click on the “System Preferences” icon.2. Select “Network” (1) from the “System Preferences” menu.149
50MANUALLY CONFIGURING NETWORK SETTINGS3. Select “Built-in Ethernet” (2) next to “Show” in the Network menu.23454. Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see“Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to makesure that “Connect using PPPoE” is NOT selected. If it is, you will need toconfigure your Router for a PPPoE connection type using your user name andpassword.5. If “Manually” is selected, your Router will need to be set up for a static IPconnection type. Write the address information in the table below. You willneed to enter this information into the Router.6. If not already selected, select “Using DHCP” next to “Configure” (4), then click“Apply Now”.Your network settings are now configured for use with the Router.
51MANUALLY CONFIGURING NETWORK SETTINGSManually Configuring Network Settings in Windows 2000, NT, or XP1. Click “Start”, “Settings”, then “Control Panel”.2. Double-click on the “Network and dial-up connections” icon (Windows 2000)or the “Network” icon (Windows XP).3. Right-click on the “Local Area Connection” associated with your networkadapter and select “Properties” from the drop-down menu.4. In the “Local Area Connection Properties” window, click “Internet Protocol(TCP/IP)” and click the “Properties” button. The following screen will appear:1235. If “Use the following IP address” (2) is selected, your Router will need to beset up for a static IP connection type. Write the address information the tablebelow. You will need to enter this information into the Router.6. If not already selected, select “Obtain an IP address automatically” (1) and“Obtain DNS server address automatically” (3). Click “OK”.Your network settings are now configured for use with the Router.
52MANUALLY CONFIGURING NETWORK SETTINGSManually Configuring Network Settings in Windows 98 or Me1. Right-click on “My Network Neighborhood” and select “Properties” from thedrop-down menu.2. Select “TCP/IP > Settings” for your installed network adapter. You will see thefollowing window.1233. If “Specify and IP address” is selected, your Router will need to be set up fora static IP connection type. Write the address information in the table below.You will need to enter this information into the Router.4. Write the IP address and subnet mask from the “IP Address” tab (3).5. Click the “Gateway” tab (2). Write the gateway address down in the chart. 6. Click the “DNS Configuration” tab (1). Write the DNS address(es) in the chart.7. If not already selected, select “Obtain IP address automatically” on the IPaddress tab. Click “OK”. Restart the computer. When the computer restarts, your network settings are nowconfigured for use with the Router.
53MANUALLY CONFIGURING NETWORK SETTINGSRecommended Web Browser SettingsIn most cases, you will not need to make any changes to your web browser’ssettings. If you are having trouble accessing the Internet or the Web-BasedAdvanced User Interface, then change your browser’s settings to therecommended settings in this section.Microsoft Internet Explorer 4.0 or Higher1. Start your web browser. Select “Tools” then “Internet Options”.2. In the “Internet Options” screen, there are three selections: “Never dial aconnection”, “Dial whenever a network connection is not present”, and “Alwaysdial my default connection”. If you can make a selection, select “Never dial aconnection”. If you cannot make a selection, go to the next step.3. Under the “Internet Options” screen, click on “Connections” and select “LANSettings”.
54MANUALLY CONFIGURING NETWORK SETTINGS4. Make sure there are no check marks next to any of the displayed options:“Automatically detect settings”, “Use automatic configuration script”, and“Use a proxy server”. Click “OK”. Then click “OK” again in the “InternetOptions” page.Netscape Navigator 4.0 or Higher1. Start Netscape. Click on “Edit” then “Preferences”.2. In the “Preferences” window, click on “Advanced” then select “Proxies”. In the“Proxies” window, select “Direct connection to the Internet”.
55GLOSSARYIP addressThe “IP address” is the Internal IP address of the Router. To access the advancedsetup interface, type this IP address into the address bar of your browser. Thisaddress can be changed if needed. To change the IP address, type in the new IPaddress and click “Apply Changes”. The IP address you choose should be a non-routable IP. Examples of a non-routable IP are:192.168.x.x (where x is anything between 0 and 255.)10.x.x.x (where x is anything between 0 and 255.)Subnet MaskSome networks are far too large to allow all traffic to flood all its parts. Thesenetworks must be broken down into smaller, more manageable sections, calledsubnets. The subnet mask is the network address plus the information reservedfor identifying the “subnetwork”.DNSDNS is an acronym for Domain Name Server. A Domain Name Server is a serverlocated on the Internet that translates URLs (Universal Resource Links) likewww.belkin.com to IP addresses. Many ISPs do not require you to enter thisinformation into the Router. If you are using a static IP connection type, thenyou may need to enter a specific DNS address and secondary DNS address for yourconnection to work properly. If your connection type is Dynamic or PPPoE, it islikely that you do not have to enter a DNS address.PPPoE (Routing Mode, for multiple PCs)Most ADSL providers use PPPoE as the connection type. If you use an ADSLmodem to connect to the Internet, your ISP may use PPPoE to log you into theservice.Your connection type is PPPoE if:1. Your ISP gave you a user name and password which is required to connect tothe Internet 2. Your ISP gave you software such as WinPoET, Enternet300 that you use toconnect to the Internet
56GLOSSARY3. You have to double-click on a desktop icon other than your browser to get onthe InternetTo set the Router to use PPPoE, type in your user name and password in thespaces provided. After you have typed in your information, click “Apply Changes”.After you apply the changes, the Internet Status indicator will read “connectionOK” if your Router is set up properly.PPPoA (Routing Mode, for multiple PCs)Enter the PPPoA information in the provided spaces, and click “Next”. Click“Apply” to activate your settings.a. User name - Enter the ISP assigned user name. (Assigned by your ISP).b. Password - Enter your password. (Assigned by your ISP).c. Retype Password - Confirm the password. (Assigned by your ISP).d. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier(VCI) parameter here. (Assigned by your ISP).Disconnect after X...This feature is used to automatically disconnect the Router from your ISP whenthere is no activity for a specified period of time. For instance, placing a checkmark next to this option and entering “5” into the minute field will cause theRouter to disconnect from the Internet after five minutes of no Internet activity.This option should be used if you pay for your Internet service by the minute. Channel and SSIDTo change the channel of operation of the Router, select the desired channel fromthe drop-down menu and select your channel. Click “Apply Changes” to save thesetting. You can also change the SSID. The SSID is the equivalent to the wirelessnetwork's name. You can make the SSID anything you want to. If there are otherwireless networks in your area, you should give your wireless network a uniquename. Click inside of the SSID box and type in a new name. Click “Apply Changes”to make the change.
57ESSID Broadcast Many wireless network adapters currently on the market possess a feature knownas site survey. It scans the air for any available network and allows eachcomputer to automatically select a network from the survey. This occurs if thecomputer’s SSID is set to "ANY”. Your Belkin Router can block this random searchfor a network. If you disable the "ESSID Broadcast" feature, the only way acomputer can join your network is by its SSID being set to the specific name ofthe network (like WLAN). Be sure that you know your SSID (network name)before enabling this feature. It is possible to make your wireless network nearlyinvisible. By turning off the broadcast of the SSID, your network will not appearin a site survey. Obviously, turning off the broadcast feature of the SSID helpsincrease security.EncryptionSetting encryption can help keep your network secure. The Router uses WiredEquivalent Privacy (WEP) encryption to protect your data and features two ratesof encryption: 64-bit and 128-bit. Encryption works on a system of keys. The keyon the computer must match the key on the Router, and there are two ways tomake a key. The easiest is to let the Router’s software convert a passphraseyou’ve created into a key. The advanced method is to enter the keys manually.Application GatewaysApplication Gateways let you specify specific ports to be open for specificapplications to work properly with the Network Address Translation (NAT) featureof the Router. A list of popular applications has been included. You can select anapplication from the popular choices included in the drop-down list. Yourselections will be programmed into the Router. From the drop-down list, selectthe row that you want to copy the settings from, and the row you want to copyto, and then click "Copy To". The settings will be transferred to the row youspecified. Click "Apply Changes" to save the setting for that application. If yourapplication is not here, you will need to check with the application vendor todetermine which ports need to be configured. You can manually input this portinformation into the Router.GLOSSARY
58GLOSSARYVirtual ServersThis function will allow you to route external (Internet) calls for services such asa web server (port 80), FTP server (Port 21), or other applications through yourRouter to your internal network. Since your internal computers are protected by afirewall, machines from the Internet cannot get to them because they cannot be“seen”. If you need to configure the Virtual Server function for a specificapplication, you will need to contact the application vendor to find out whichport settings you need. To manually enter settings, enter the IP address in thespace provided for the internal machine, the port type (TCP or UDP), and the LAN& Public port(s) required to pass, select “Enable” and click “Set”. You can onlypass one port per internal IP address. Opening ports in your firewall can pose asecurity risk. You can enable and disable settings very quickly. It is recommendedthat you disable the settings when you are not using a specific application.Client IP filtersThe Router can be configured to restrict access to the Internet, e-mail or othernetwork services at specific days and times. Restriction can be set for a singlecomputer, a range of computers, or multiple computers. URL BlockingTo configure the URL Blocking feature, specify the websites (www.somesite.com)and or keywords you want to filter on your network. Click “Apply Changes” toactivate the change. To complete this configuration, you will need to create ormodify an access rule in the Client IP filters section. To modify an existing rule,click the “Edit” option next to the rule you want to modify. To create a new rule,click on the “Add PC” option. From the “Access Control Add PC” section, checkthe option for “WWW with URL Blocking” in the Client PC Service table to filterout the websites and keywords specified.Schedule RuleTo configure the Schedule Rule, specify the Name, Comment, Start Time, and EndTime that you want to filter on your network. This page defines schedule rulenames and activates the schedule for use in the “Access Control” page.
59GLOSSARYMAC Address FilteringThe MAC Address Filter is a powerful security feature that allows you to specifywhich computers are allowed on the network. Any computer attempting to accessthe network that is not specified in the filter list will be denied access. When youenable this feature, you must enter the MAC address of each client on yournetwork to allow network access to each or copy the MAC address by selectingthe name of the computer from the “DHCP Client List”. To enable this feature,select “Enable”. Next, click “Apply Changes” to save the settings. DMZIf you have a client PC that cannot run an Internet application properly frombehind the firewall, you can open the client up to unrestricted two-way Internetaccess. This may be necessary if the NAT feature is causing problems with anapplication such as a game or video conferencing application. Use this feature ona temporary basis. The computer in the DMZ is not protected from hackerattacks. To put a computer in the DMZ, enter the last digits of its LAN IP addressin the Static IP field and click “Apply Changes” for the change to take effect. If you have only one Public (WAN) IP address, then you can leave the Public IPto 0.0.0.0. If you are using multiple Public (WAN) IP addresses, it is possible toselect which Public (WAN) IP address the DMZ host will be directed to. Type inthe Public (WAN) IP address you wish the DMZ host to direct to, enter the lasttwo digits of the IP address of the DMZ host computer, and click “Apply Changes”. Administrator PasswordThe Router ships with NO password entered. If you wish to add a password formore security, you can set a password from your Router’s web-based userinterface. Keep your password in a safe place as you will need this password ifyou need to log into the Router in the future. It is STRONGLY RECOMMENDEDthat you set a password if you plan to use the remote management feature. The login time-out option allows you to set the period of time that you can belogged into the Router's advanced setup interface. The timer starts when therehas been no activity. For example, you have made some changes in the advancedsetup interface, then left your computer alone without clicking “Logout”.
60GLOSSARYAssuming the time-out is set to 10 minutes, then 10 minutes after you leave, thelogin session will expire. You will have to login to the Router again to make anymore changes. The login time-out option is for security purposes and the defaultis set to 10 minutes. Note, only one computer can be logged into the Router’sadvanced setup interface at a time. Time and Time ZoneThe Router keeps time by connecting to a Simple Network Time Protocol (SNTP)server. This allows the Router to synchronize the system clock to the globalInternet. The synchronized clock in the Router is used to record the security logand control client filtering. Select the time zone that you reside in. If you residein an area that observes daylight saving time, then place a check mark in the boxnext to “Enable Daylight Saving”. The system clock may not update immediately.Allow at least 15 minutes for the Router to contact the timeservers on theInternet and get a response. You cannot set the clock yourself. Remote ManagementBefore you enable this function, MAKE SURE YOU HAVE SET THEADMINISTRATOR PASSWORD. Remote management allows you to make changesto your Router’s settings from anywhere on the Internet. UPnPUPnP (Universal Plug-and-Play) is a technology that offers seamless operation ofvoice messaging, video messaging, games, and other applications that are UPnP-compliant. Some applications require the Router's firewall to be configured in aspecific way to operate properly. This usually requires opening TCP and UDP portsand in some instances setting trigger ports. An application that is UPnP-compliant has the ability to communicate with the Router, basically “telling” theRouter which way it needs the firewall configured. The Router ships with theUPnP feature disabled. If you are using any applications that are UPnP-compliant, and wish to take advantage of the UPnP features, you can enable theUPnP feature. Simply select “Enable” in the “UPnP Enabling” section of theUtilities page. Click “Apply Changes” to save the change.
61TROUBLESHOOTINGYou can find technical support information at www.belkin.com/networking orwww.belkin.com through the tech support area. If you want to contact technicalsupport by phone, please call 877-736-5771. Technical support is available 24-hours-a-day, 7-days-a-week.ProblemThe ADSL SYN LED is not on.The ADSL Data LED is not on.My connection type is staticIP address. I cannot connectto the Internet.Possible Cause/Solution1. Check the connection between the ModemRouter and ADSL line. Make sure the cablefrom the ADSL line is connected to the porton the Router labeled “ADSL”. 2. Make sure the Router has power. The “PWR”LED of the front panel should be illuminated.1. Make sure the cable from the ADSL line isconnected to the port on the Router labeled“ADSL” and the “SYN” LED is on.2. Make sure you have the correct VPI/VCI, username, and password from your ISP provider.Since your connection type is static IP address,your ISP must assign you the IP address, subnetmask, and gateway address. Instead of using theWizard, go to “Connection Type”, and thenselect your connection type. Click “Next”, select“Static IP”, and enter your IP address, subnetmask, and default gateway information.
62TROUBLESHOOTINGI’ve forgotten or lost mypassword.My wireless PC cannotconnect to the Router.The wireless network isoften interrupted.Press the Reset button on the rear panel(holding it down for at least five seconds) torestore the factory defaults.1. Make sure the wireless PC has the same SSIDsettings as the Router, and you have thesame security settings on the clients such asWPA or WEP encryption.2. Make sure the distance between the Routerand wireless PC are not too far away.1. Move your wireless PC closer to the Router tofind a better signal.2. There may also be interference, possiblycaused by a microwave oven or 2.4GHzcordless phones. Change the location of theRouter or use a different wireless channel.
63INFORMATIONCaution: Exposure to Radio Frequency Radiation.The radiated output power of this device is far below the FCC radio frequency exposure limits.Nevertheless, the device shall be used in such manner that the potential for human contact normal operation is minimized.When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoidthe possibility of exceeding the FCC radio frequency exposure limits, human proximity to theantenna shall not be less than 20cm (8 inches) during normal operation.Federal Communications Commission NoticeThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy. If not installed and usedin accordance with the instructions, it may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouragedto try and correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the distance between the equipment and the receiver.• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.ModificationsThe FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the users authority to operate the equipment.FCC StatementDECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITYWe, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our soleresponsibility that the product,F5D7630-4to which this declaration relates,complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) thisdevice may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.
64INFORMATIONCanada-Industry Canada (IC)The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada. This Class Bdigital complies with Canadian ICES-003.Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.Europe-European Union NoticeRadio products with the CE 0682 or CE alert marking comply with the R&TTE Directive (1995/5/EC) issued by the Commission of theEuropean Community. Compliance with this directive implies conformity to the following European Norms (in bracketsare the equivalent international standards). • EN 60950 (IEC60950) – Product Safety• EN 300 328 Technical requirement for radio equipment• ETS 300 826 General EMC requirements for radio equipment.To determine the type of transmitter, check the identification label on your Belkin product.Products with the CE marking comply with the EMC Directive (89/336/EEC) and the Low VoltageDirective (72/23/EEC) issued by the Commission of the European Community. Compliance withthese directives implies conformity to the following European Norms (in brackets are the equivalent international standards).• EN 55022 (CISPR 22) – Electromagnetic Interference• EN 55024 (IEC61000-4-2,3,4,5,6,8,11)- Electromagnetic Immunity• EN 61000-3-2 (IEC610000-3-2) - Power Line Harmonics• EN 61000-3-3 (IEC610000) – Power Line Flicker• EN 60950 (IEC60950) – Product SafetyProducts that contain the radio transmitter are labeled with CE 0682 or CE alert marking and mayalso carry the CE logo.
65INFORMATIONBelkin Corporation Limited Lifetime Product WarrantyBelkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at nocharge provided it is returned during the warranty period, with transportation charges prepaid, tothe authorized Belkin dealer from whom you purchased the product. Proof of purchase may berequired. This warranty does not apply if the product has been damaged by accident, abuse, misuse, ormisapplication; if the product has been modified without the written permission of Belkin; or ifany Belkin serial number has been removed or defaced.THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY ANDALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE.No Belkin dealer, agent, or employee is authorized to make any modification, extension, oraddition to this warranty.BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTINGFROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOTLIMITED TO, LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING ORREPRODUCING ANY PROGRAM OR DATA STORED IN, OR USED WITH, BELKIN PRODUCTS.Some states do not allow the exclusion or limitation of incidental or consequential damages orexclusions of implied warranties, so the above limitations of exclusions may not apply to you.This warranty gives you specific legal rights, and you may also have other rights that vary fromstate to state.
Belkin Corporation501 West Walnut StreetCompton • CA • 90220 • USATel: 310.898.1100Fax: 310.898.1111Belkin Components, Ltd.Express Business Park • Shipton WayRushden • NN10 6GL • United KingdomTel: +44 (0) 1933 35 2000Fax: +44 (0) 1933 31 2000Belkin Components B.V.Starparc Building • Boeing Avenue 3331119 PH Schiphol-Rijk • The NetherlandsTel: +31 (0) 20 654 7300Fax: +31 (0) 20 654 7349Belkin, Ltd.7 Bowen Crescent • West GosfordNSW 2250 • AustraliaTel: +61 (0) 2 4372 8600Fax: +61 (0) 2 4372 8603Belkin Tech SupportUS: 877.736.5771310.898.1100 ext. 2263Europe: 00 800 223 55 460Australia: 1800 666 04023MS293© 2003 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac, Mac OS, AppleTalk, Apple, and AirPort are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.belkin.com

Navigation menu