Beijing TierTime Technology 3DP-12 UP Mini 2 User Manual part 2

Beijing TierTime Technology Co. Ltd UP Mini 2 part 2

Contents

User manual part 2

3\ Click network to choose an available network ( user can also use touch screen panelto setup WIFI connection).Choose your network from the drop down list.WIFI Setup (UP Studio) 3-2
5\ If “Private” is set to ON, a private password could be optionally added to limit printer WIFI access to trusted users. Please note that the password is a weak protection that can be accessed and changed by anyone who can connect the machine through USB.4\ Input the password for the WIFI network.6\ Printer TabDisconnect USB and choose available printers on the network to operate through WIFI.WIFI Setup (UP Studio) 3-3
DecreaseMaterial Weightadjustmentcurrent ma-terial weightSave currentsettingIncreaseSet Materials (Touch Screen)Set Materials (UP Studio)Stop extru-sionand heatingwithdraw materialExtrude Filament Withdraw Filament Stop All ActionsSelect MaterialInput Material weightChange Ma- terial extrude materialBack
During nozzle height detec- tion, the print head nozzle will touch the thin metal sheet on the detector to make meas- urement.Open the Calibration panelAt the Nozzle Height section, click “Auto” will initiate the automatic nozzle height de- tection process.Clicking +/- button will move the platform up and down, or user could input a specific value at the text field and click “To” button the move the platform to a specific height. Click save will replace nozzle height value with current platform height.Set Nozzle Height (UP Studio)For setting nozzle height with touch screen please refer to page 16.
WIFI switch, if swithed offthe WIFI setting buttonwill not appear. Peheat switch, when turned on, for every print job, the printerwill first preheat 15min beforeproceed to printing.Turn on or off theinternal air filtration.WIFI setting buttoninternal lighting switchMachine Configuration
Language and Factory ResetModel: current machine modelS.N.: machine serial numberFirmware Ver: shows current firmware version Print Time: total print time countPrint Weight: total print weight countActived Date: the date of printer activation MAC: mac address of printerReset: revert to factory setting. This will change some machine setting to default; remove total printed time and weight data.Language: choose language. Current available language: Chinese simplified, Chinese Traditional, Korean, Japanese, French,Germany, English
Unplug printer and restartSuggested solution,in this case: Contact supportreinitialize the printerError PromptsOther possible error prompt:Error codeError Message
Choose the model and Click rotate button.Choose rotation axisUser could input a spe- cific valueor choose a preset value for rotation.Alternatively, user could use the rotationguide to rotate model in real time by holdand drag with mouse.Rotating Models (UP Studio)
By default the scaling is in all axes.User could also choose a specific axis for scaling.User could input a specific scalingfactor or choose a preset valueClick MM or INCH to con- vert models tosizes of corresponding units.Alternatively, user could use the scaling guideon the model. User could scalein a specific axis or scale in all directionsby hold and drag with mouse.Scaling Models (UP Studio)Choose the model and Click rotate button.
Alternatively, user could use the translational guide on the model to move on the X-Y plane or a single direc- tion by hold and drag with mouse.Choose the the direction of movementUser could input a specific value orchoose a preset value for distanceof move- ment.Move Model (UP Studio)Choose the model and click the Move button.
Print PreferenceSurface: the number layers at the sealing the top and the bottom of the printed object.Angle: This determine at which angle the Surface layers start to be printed.Dense: Choose the number of dense layers between support and supported surfaces.Angle: Determine the angle which support and dense layer to gen- erated.Area: Determine the minimal area of surface that will be supported, area less than this vaule will not be supported.Space: Determine how desne the support will be, the larger the value the less dense of the support.2-1
Print Preference 2-2No Raft: print without raft.No Support: print without supportStable Support: Support structure will be stronger but less easy to be removed.Unsolide Model: The software will autofix nonsolid modelsThin Wall: The Software will detect wall thickness that is too thin to print and expand the feature to a printable size. Keep Heating: The platform will be heated after print job is completed.
Printing ParametersSurfaceInfillSupportRaftSurfaceDense (support)Print PlatformSuppot Range: < 30oSupport Range: < 90oDense: Solid support structure ensures that the surface being supported retains its shape and surface finish.Infill: The inner structure of the printed object. The density of the infill can be ad- justed.Raft: The thick structure that assists with the adhesion of the object to the plat- form.Surface: The top and bottom layers of the printed object.
Printer InfoPrinter info will be displayed by clicking the small button on the top left hand corner of the connected printer icon. Information including printer type, serial number and firmware version will be displayed. User could also set a custom name for the printer at the name field.
Check Auto Update to allow the software to inform user the latest version. Software Version and Update
The Base height determine the thickness of a flat layer that will hold the picture.Model Height determine the contrast of the finally print.The convert negative but- ton will reverse the pixel intensity so that user could choose the picture to be protruding from or sunken into the base.Convert Picture Into 3D ModelClick add picture button and select a picture.2-1
Update 3D model button. This button will convert the modi- fied picture on the left to a 3D rendering on the right.OK button send the 3D rendering to the 3D printing interface for printing.Convert Picture Into 3D Model 2-2
Air Flow AdjustmentknobPrinting TechniquesEnsure accurate nozzle height. If the nozzle height value is too low, it will cause warping; if it is too high, it will crash the nozzle into the platform, causing damage and clogging. You can manually fine-tune the nozzle height value in the "Calibation" panels. You can try to adjust the nozzle height value plus or minus 0.1 –0.2mm from the base on previous re- sults.Calibrate the printing platform well. An unleveled platform usu-ally causes warping.Allow enough time for sufficient pre-heating. Please use the 3D Print – Preheat function. A well preheat- ed platform is essential for printing large objects without warping.The airflow on print head is adjustable, turn the air flow adjust-ment knob to change the amount of cooling of printed object. When printing in PLA, turn the lever counterclockwise to direct the airflow to the nozzle. This will cool the PLA as soon as it is extrud- ed and improve print quality. When printing large object using ABS, turn the lever clockwise to direct the airflow away from nozzle to slow down the cool- ing and to prevent warping. Users could experiment with different amount of cooling to achieve optimal result.Printing with no raft. It is highly recommended to use raft for normal printing as it improves adhesion and is required for leveling compensation. It is turned on by default, but you can turn it off in the "Print Pre- view" panel if you desire to.Printing with no support. It is possible to print with- out sup-porting structures. You can turn off support
Air Filtration UnitHEPA-FilterFront ViewTurn anti-clockwise toopen the cap.Printer Maintenance - Air Filter ReplacementChange air filter for air filatraton unit. It is recommmended to change the filter for every 300 hours of usage or 6 months.
Printer Maintenance - Touch ScreenRemove the 2 screwson front plate.FFC cable of LCDtouch screen.Micro SD card ofLCD touch screen.Open the front plate.
Heat up the nozzle to printing temperature by using the extrude function in maintenace interface.Nozzle could be removed by using the nozzle wrench provided.User does not need to remove printhead cover in order to remove nozzle.The printhead cover could be removedafter unscrew 2 bolts.Print Head Maintenance
Remove the 2 screws on themainboard cover.MainboardCPUPrinter Maintenance - remove motherboard cover
ࡄϙ๗ᅁᬣА⻾ឭᰶ䭽ڙथౝ౭喟ࡄϙጯ᱊䭠ࡧ䙿Іᶒ䌜⩟तႼ⎽๔࣓ბᓛԎ喟!݈䚤㥒!UJFSUJNF᫝⊗ᓛࢇ喟!๗ᅁᬣАMail:service@tiertime.net web:www.tiertime.com/www.up3d.comTel:010 6433 8663-601/010 6433 8663-805
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The distance between user and products should be no less than 20cm

Navigation menu