Behavior Tech Computer RX8193URF2 Wireless Transceiver User Manual 8193URF2 E Modify

Behavior Tech Computer Corporation Wireless Transceiver 8193URF2 E Modify

Manual

8193URF2 Quick Installation Guide Important Information For more detailed information, please refer to the Help file in the Driver CD in the Help directory. The ways to display Help file are as follows: - After driver installation, please click the driver icon at the right-bottom in the Window system tray. Click the Help button on the left-bottom of the driver Configuration dialog box and the help file will pop up. Or - Please see “Help\ Help.htm” in the Driver CD. Hardware Installation Front View of Back View of USB Connector USB Connector 1. Plug in the receiver connector into your available USB port on PC. 2. Make sure the batteries of the keyboard and mouse are installed correctly, please follow the polarity signs in the battery compartment. Pairing Procedure The pairing button locates on the top of the receiver with a LED under to show the pairing or data reception status. The ID-recognition function helps to protect against interference from other RF products in the same environment. Remember to pair ID when other RF products affect your keyboard kit. 1. Press the pairing button on the top of the receiver first. Receiver LED will blink slowly indicating it’s ready to receive keyboard/mouse pairing information. 2. Next, press the pairing button on the bottom of the mouse once. 3. Then press the pairing button on the top of the receiver again. 4. Finally, press the pairing button on the bottom of the keyboard Receiver LED flashes 3 times rapidly as indication it’s paired with this keyboard and mouse. Note: - The whole procedure should be complete within 60 seconds. - Make sure your PC is on and running when doing the pairing procedure. ID Button(LED) - Every time you want to reset each one of the receiver, mouse or keyboard ID, you must follow the procedures above to set all IDs again. Driver Installation n USB Device Driver The USB device driver is included in Windows operating system. During initial installation of the USB device, the system will automatically detect a new hardware being added, and then bring up "Add New Hardware Wizard" dialogue box. Please follow the Wizard's USB driver installation steps. Once this installation step is completed the basic functions of the USB device will work under the operating system. The additional functions are provided only after the KeyMaestro application is installed. n KeyMaestro Input Device Driver 1. Insert the CD labeled "EMPREX" into your CD-ROM. 2. The CD will automatically run and bring up the Setup dialogue box. 3. Follow the on-screen instruction to install the driver. 4. The driver icon will show at the right-bottom of the Windows system tray when the driver is loaded. Pairing button on the bottom of the keyboard Pairing button on the top of the receiver (With a LED under the pairing button) Pairing button on the bottom of the mouse English 8193URF2 QIG 3100506090 Version 1.0 英文
FCC GUIDELINES This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: w Reorient or relocate the receiving antenna. w Increase the separation between the equipment and receiver. w Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. w Consult the dealer or an experienced radio/TV technician for help. w Use only shielded cables to connect I/O devices to this equipment. FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Information to user: The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment is intended for use in the following countries EU 18 countries: Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Italy, Luxembourg, Netherlands, Spain, Sweden, United Kingdom, Portugal, Greece, Switzerland, Norway, and Iceland. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 低功率電波輻射性電機管理辦法： 第十二條：經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條：低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電信。 低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Navigation menu