Behavior Tech Computer KB8193C KEYBOARD User Manual 0362732

Behavior Tech Computer Corporation KEYBOARD 0362732

USERS MANUAL

8193C KEYBOARD USER'S GUIDEProduct OverviewThis document describes the functional specification of standard USB keyboard and standard USBHub keyboard. Its function is fully compatible with the Universal Serial Bus Specification Revision1.1 as well as the Human Interface Devices (HID) class specification 1.1.USB Interface Features:Ø USB is a "must-have" feature in the current market.Ø The instant way to expand your PC. You never to open your PC and you don't need to worryabout add-in cards, DIP switch setting or IRQs.Ø "Hot-swapping" feature: You don't even need to shut down and restart your PC to attach orremove a peripheral. Just plug it in and go!The ACPI Power Management Keys and Their FunctionsSystem requirement:Ø Microsoft Windows 98 Windows® ME, Windows® 2000 or Windows® XP operating system.Ø The system supporting ACPI or APMII.Ø ATX motherboard and ATX power supply.The functions of the power management are specified and performed by Windows 98 operatingsystem, no vendor-specified driver is needed to use them, but the Windows 98 operating system isnecessary. There could be one or two or three ACPI power management keys on the keyboard, thosefunctions are as follows.Power off key: Power down the system. Sleep key: Put the system to sleep.Wake up key: Wake up or powers up the system.Power key: (Single key with three functions above)Ø Press this key and hold over four seconds to power down the system.Ø Press this key and release it within four seconds to put the system to sleep.Ø When the system is asleep or powered down, press this key and release it within fourseconds to wake up or power up the system.USB Cable, Plug Contact Numbering & PortsUSB keyboard has a cable for sub-channel device and a series A plug, which fully comply with theUSB specification 1.1.ContactNumber Signal Name Comment1VCC Cable power2- Data3+ Data 4Ground Cable ground UUSSBB pplluugg
3100504463 Version 1.0 August 1999 Printed in ChinaPS/2 Keyboard Connector Contact Numbering & Port (if equipped)Contact Number Signal Name1data2Reserved3Ground4Reserved5+ 5VDC6clockFCC GUIDELINESThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:♦ Reorient or relocate the receiving antenna.♦ Increase the separation between the equipment and receiver.♦ Connect the equipment into an outlet on a circuit different from that to which the receiveris connected.♦ Consult the dealer or an experienced radio/TV technician for help.♦ Use only shielded cables to connect I/O devices to this equipment.FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) this device may not cause harmful interference, (2) this device must accept anyinterference received, including interference that may cause undesired operation.Information to User:F Any changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate this equipment. Shielded interfacecable, if any, must be used in order to comply with emission limits.IBM PS/2 are registered trademarks of International Business Machines Corporation.Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.All other trademarks are trademarks of their respective holders.

Navigation menu