Behavior Tech Computer KB5090RX RF/WIRELESS KEYBOARD/MOUSE RECEIVER User Manual 5090rf 1

Behavior Tech Computer Corporation RF/WIRELESS KEYBOARD/MOUSE RECEIVER 5090rf 1

Exhibit 7 The user manual of EUT

5090RFMulti-ChannelKEYBOARDUser’s GuideVersion 1.0
The information in this document is subject to change without notice and does not represent acommitment on the part of the vendor.No warranty of representation, either expressed or implied, is made with respect to the quality,accuracy or fitness for any particular purpose of this document. The manufacturer reserves theright to make changes to the content of this document and/or the products associated with it atany time without obligation to notify any person or organisation of such changes.In no event will the manufacturer be liable for direct, indirect, special, incidental or consequentialdamages arising out of the use or inability to use this product or documentation, even if advised ofthe possibility of such damages.Copyright © July 1998, 1999, 2000. All rights reservedIBM, PC/AT and PS/2 are registered trademarks of International Business Machines Corporation.Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in theUnited States of America and/or other countries.All other trademarks are trademarks of their respective holders.FCC GUIDELINESThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructionsmay cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:s Reorient or relocate the receiving antennas Increase the separation between the equipment and receivers Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.s Consult the dealer or an experienced radio/TV technician for help.The Class B digital apparatus meets all requirements of the Canadian Interference-CausingEquipment Regulation.Cet appareil numerique de la class B respecte toutes les exigences du Règlement sur le materielbrouilleur du Canada.CautionF Any changes or modifications not expressly approved bythe party responsible for compliance could void theuser's authority to operate this equipment. Shielded
interface cable, if any, must be used in order to complywith emission limits.
5090RF Multi-Channel Keyboard User’s Guide Version 1.0Hardware Installation1INTRODUCTIONThe 5090RF is not only a radio frequency multi-channel keyboard but also amultimedia keyboard. This wireless keyboard is designed to make your life easier. Itis just the right size and weight thus makes it easy to hold in hand or put on yourlaps, anywhere in the room. It's easy to touch and is quiet to the ears. Very wide-angle and long-distance detection frees you from your desktop. In addition, withsleep mode power saving and “book-on-keyboard protection”, it's even easier to usebattery in any environment.With additional 15 multimedia buttons, this multimedia keyboard embeds many usefulmultimedia functions. By simply pressing a button, the user can arrive at the functionthey desire. In addition, the accompanying software supplies functions to organizethese multimedia buttons and to customize a Shortcut button that provides you toaccess to the documents and programs you most often used. Using MultimediaKeyboard makes work more efficient and has more fun.Featuress So very wide scope of operating range and angles that the angles limitation ofthis keyboard to be the lowests Built-in button mouse is compatible with Microsoft mouse and PS/2 mouses Book-on-keyboard protections Power savings This keyboard can be used under Windows NT, Windows 2000, Windows98 and Windows 95 operating system or any O.S. compatible with them.s Full size key (pitch 19.05 cm)s Long “Travel” range (key depression distance)s Long-distance detectionCautionF Please read this User's Guide from beginning to endcarefully. Especially INSTALLATION section from nextpage will tell you how to apply the additional 15-multimedia buttons on the top of your keyboard.
5090RF Multi-Channel User’s Guide Version 1.0Hardware Installation2INSTALLATIONFigure 1: Keyboard InstallationØ Battery Low LED Indicator:(1). It is always not bright when the keyboard doesn't be typed. If theelectricity of battery full and you typing, it is never bright too.(2). Otherwise, if the battery low it would be lighted up to indicate thebattery wore out.Ø Book-on-Keyboard Protection and Power SavingFeatures:(1). Prolong the life of this keyboard.(2). Whenever you don't type any key over 100 mini seconds the5090RF keyboard will sleep.(3). If the keyboard is pressed accidentally over 20 seconds it will sleeptoo.
5090RF Multi-Channel Keyboard User’s Guide Version 1.0Hardware Installation31. Check the two connectors of the receiver. The purple one should be plug inPS/2 keyboard port, and the other one could be green for plugging in PS/2mouse port.Figure 2: The receiver has 2 connectors. One with keyboard iconis keyboard connector, and the other one with mouse icon ismouse connector.2. Connect the receiver with your computer system. Plug the purple connector inthe PS/2 keyboard port, and the green one in the PS/2 mouse port on yourcomputer system.F Heartily advise you to put the receiver in front of the computer system aswell as monitor. In addition, the receiver needs to be placed far awaythe magnetic jam source, such as: motor, monitor.... The reason is thatthe magnetic field caused by the magnetic jam source will interfere thereceiver working, and the interference will cause data reading error ormissing.F Before start the computer system, you should plug mouse connector inmouse port well. Otherwise, your computer system would not detect themouse device, but takes that you do not install mouse.3. On the rear of the keyboard is equipped with battery and DIP switch for alteringfrequency channel.
5090RF Multi-Channel User’s Guide Version 1.0Hardware Installation44. Removing the battery cover and insert three batteries of AA (UM-3) type only.Make sure the polarities are correct.Figure 3: On the back cover of the keyboard is equipped withchannel DIP switch and cell.5. The keyboard provides 12 Frequency channels. Channel table as following:
5090RF Multi-Channel Keyboard User’s Guide Version 1.0Hardware Installation5F The default channel is altered at channel 7 whenit left the manufacture.F Taiwan area only can use channel 7 to channel 12.F The cellular phone channel both of the Taiwan and the China is 900MHz.F The America area can use all these 12 channels.6. Place the 5090RF keyboard transmitter in front of the receiver sensor and noobstacles are between them, so the signal can be correctly sent. The effectivedistance may reach 10 meters that depends on the environment.F The 5090RF keyboard could be placed within very wide and effectiveangles surrounding the receiver.7. Power on your system and see if it works fine. The input method, whetherkeystrokes or click the button mouse, must be applied separately to avoid datareception loss and mistakes.F If your keyboard isn't working or it's working incorrectly, it could bethat the keyboard isn't connected properly or a key is pressed duringstarting up. Repeat the installation steps like above.8. When the keyboard works fine, you should install Multimedia KeyboardDriver. Therefore the 15-multimedia buttons can work. For driver installation,you may refer to the instruction on the CD-ROM enclosed.F After installing the Multimedia Keyboard driver, the 15-multimediabuttons on your keyboard can work normally. For multimediabutton functions, please see online Help of thedriver.CautionF For the receiver may work fine it is stronglyrecommended do not alter the double-click speedof the mouse at the Fastest level, otherwisedouble-click built-in button mouse will not bedetected by Windows.
5090RF Multi-Channel User’s Guide Version 1.0Hardware Installation6USING EMBEDDED NUMERIC KEYPADThe embedded numeric keypad consists of 15 keys and functions in three ways:s As a part of the main keyboard.s As a numeric keypad.s As a cursor movement keypad.*Figure 4: as a part of the main keyboardFigure 5: as a numeric keypad Figure 6: as a cursor movementkeypadThere are three keys to activate the embedded numeric keypad: [Num Lock], [Fn],and [Shift].[Num Lock]: This is a toggle key. The Num Lock LED indicator is default set to off.When the [Num Lock] key is pressed, the Num Lock LED indicator on the receiveris lit and the embedded numeric keypad function is activated.
5090RF Multi-Channel Keyboard User’s Guide Version 1.0Hardware Installation7[Fn] and [Shift]: These keys are used in conjunction with the [Num Lock] keyand work only when pressed.For accessing the embedded numeric keypad, please refer to the following table:When Num Lock is OFF (default), the 15 keys of embedded numeric keypad worksas a part of main keyboard. You can:Press: To:[Fn]* Temporarily enable the cursor movement function.[Fn]* + [Shift]* Temporarily enable the embedded numeric keypad, cursormovement and highlighting functions.[Num Lock]Enable the embedded numeric keypad.Lights the Num Lock LED indicator.When Num Lock is ON, the 15 keys of embedded numeric keypad work as anumeric keypad. You can:Press: To:[Fn]* Temporarily revert to the main keyboard.[Fn]* + [Shift]* Temporarily enable uppercase function of the main keyboard.[Num Lock]Disable the embedded numeric keypad.Turns off the Num Lock LED indicator.* Press and hold the key(s) during operation.[Ctrl], [ÿ], and [Enter] keysMost keyboards have two [Ctrl] keys, two [ÿ] keys on both left and right sides, anda smaller [Enter] key on numeric keypad. Although this keyboard doesn’t have right[Ctrl] key, right [ÿ] key and [Enter] (numeric keypad) key, it still supports thefunctions.Ø [Fn] + left [Ctrl] = right [Ctrl]Ø [Fn] + left [ÿ] = right [ÿ]Ø [Fn] + main [Enter] = (on Numeric Keypad) [Enter]
5090RF Multi-Channel User’s Guide Version 1.0Hardware Installation8TECHNICAL SPECIFICATIONSElectrical DataInput power :4.5 VDC (three AA batteries)Switch activation mechanism :MembraneTransmission :Radio Frequency (910.2 ~ 919.7 MHz)Multi-Channel (12 Channels)Channel & Frequency table:Channel Frequency Channel Frequency Channel Frequency1910.2 MHz 5914.2 MHz 9917.2 MHz2910.7 MHz 6914.7 MHz 10 917.7 MHz3912.2 MHz 7915.2 MHz 11 919.2 MHz4912.7 MHz 8915.7 MHz 12 919.7 MHzRated RF output power level : 0.002mW (maximum)Physical & Mechanical DataKey numbers :105 keys for U.S. version106 keys for European version108 keys for Japanese versionTotal travel :3.0 ± 0.5 mmPeak force (normal key) :55 ± 20 gramsKeyboard dimension :439 mm (L) × 210 mm (W) × 44 mm (H) mmKeyboard weight :975 g (including battery)Receiver weight :210 gEffective operating distance :5 metersBattery life : 3 months in normal operatingModulation frequency :900 MHz
5090RF Multi-Channel Keyboard User’s Guide Version 1.0Hardware Installation9Transfer rate :19.2 kbpsPre-Travel :1.0 ± 0.5 mm
5090RF Multi-Channel User’s Guide Version 1.0Hardware Installation10Environmental DataOperating temperature :0°C to 45°CStorage temperature :-20°C to 60°CRelative humidity :20% to 90% non-condensingAltitude :-1000 ft. to 10000 ft.Electromagnetic DataSAFETY : CSA, TÜV, and ULEMC : BCIQ, Canada FCC part 15, 227 Type acceptance- ETS 300 220EMC - ETS 300 683
5090RF Multi-Channel Keyboard User’s Guide Version 1.0Hardware Installation3100504660Version 1.0February 2000Printed in China

Navigation menu