Banner Engineering RGAGE1XX Q130RA User Manual

Banner Engineering Corporation Q130RA

User Manual

R-GAGE® Q130RA-AF SensorInstruction ManualOriginal InstructionsTBD Rev. A31 October 2018© Banner Engineering Corp. All rights reservedTBDDRAFT
Contents1 Product Description  ........................................................................................................................................................31.1 Models  ............................................................................................................................................................................................ 31.2 Overview  ......................................................................................................................................................................................... 31.3 Features and Indicators ................................................................................................................................................................... 42 Installation Instructions  ...................................................................................................................................................52.1 Mount the Device  ............................................................................................................................................................................52.2 Wiring ...............................................................................................................................................................................................53 Specifications  ................................................................................................................................................................. 63.1 Beam Patterns  ................................................................................................................................................................................ 63.2 Dimensions  ..................................................................................................................................................................................... 74 Windows  .........................................................................................................................................................................85 Accessories ..................................................................................................................................................................... 95.1 Quick Disconnect (QD) Cordsets  ....................................................................................................................................................95.2 Brackets and Enclosures ................................................................................................................................................................. 96 Banner Engineering Corp. Limited Warranty  ................................................................................................................10R-GAGE® Q130RA-AF Sensor         DRAFT
1 Product DescriptionRadar-Based Sensors for Detection of Moving and Stationary TargetsPlaceholder• FMCW (true-presence) radar detects moving and stationary objects•Adjustable sensing field — ignores objects beyond setpoint• Easy setup and configuration of range, sensitivity, and output with simple DIPswitches• Easy setup and configuration of range, sensitivity, and output using a PC• Sensing functions are unaffected by wind, falling rain or snow, fog, humidity, airtemperatures, or light• Sensor operates in Industrial, Scientific, and Medical (ISM) telecommunicationband•Rugged IP67 housing withstands harsh environmentsProtected by US patents.CAUTION: Make No Modifications to this ProductAny modifications to this product not expressly approved by Banner Engineering could void the user'sauthority to operate the product. Contact Banner Engineering for more information.WARNING: Not To Be Used for Personnel ProtectionNever use this device as a sensing device for personnel protection. Doing so could lead to serious injuryor death. This device does not include the self-checking redundant circuitry necessary to allow its use inpersonnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.1.1 ModelsModels MaximumRangeBeamAngle Telecom Approval1Output ConnectionQ130RA-9076-AFQ24 m (78 ft)90° × 76° Telecom approved for US, Canada andBrazil Bipolar NPN/PNPN.O./N.C.Configurable5-wire 2 m(6.5 ft)IntegralcableQ130RA-2450-AFQ 24° × 50° Telecom approved for Europe, UK,Australia, New Zealand, China, and Japan1.2 OverviewThe R-GAGE sensor emits a well-defined beam of high-frequency radio waves from an internal antenna. Some of thisemitted energy reflects back to the receiving antenna. Signal processing electronics in the sensor determine the distancefrom the sensor to the object based on the time delay of the return signal. The sensor can be configured (using a PC) tosense objects up to a specific distance, ignoring objects beyond this distance (also called background suppression).1For additional countries, contact Banner Engineering.    R-GAGE® Q130RA-AF Sensor  www.bannerengineering.com - Tel: +1.763.544.3164 3DRAFT
1.3 Features and IndicatorsPlaceholderFigure 1. R-GAGE Features1. Power LED: Green (power ON)2. Signal Strength LED: Red (flashes in proportion tothe signal strength)3. Output LEDs: Yellow (output energized); Red(configuration)R-GAGE® Q130RA-AF Sensor    4 www.bannerengineering.com - Tel: +1.763.544.3164  DRAFT
2 Installation Instructions2.1 Mount the Device1. If a bracket is needed, mount the device onto the bracket.2. Mount the device (or the device and the bracket) to the machine or equipment at the desired location. Do not tightenthe mounting screws at this time.3. Check the device alignment.4. Tighten the mounting screws to secure the device (or the device and the bracket) in the aligned position.2.2 Wiringshield (QD cordset)3124512-30V dcLoad 1Load 2+–Wiring Key:1 = Brown2 = White3 = Blue4 = Black5 = Gray (Do not connect)Note: Banner recommends that the shield wire (QD cordsets only) be connected to earth ground or dccommon. Shielded cordsets are recommended for all QD models.    R-GAGE® Q130RA-AF Sensor  www.bannerengineering.com - Tel: +1.763.544.3164 5DRAFT
3 SpecificationsRangeThe sensor is able to detect a proper object (see Detectable Objects)from 1 to 24 m (3.3 to 78.7 ft), depending on targetDetectable ObjectsObjects containing metal, water, or similar high-dielectric materialsOperating PrincipleFrequency modulated continuous-wave (FMCW) radarOperating Frequency24.050-24.250 GHz, ISM BandMaximum Output PowerERP: 3.3 mW, 5 dBmEIRP: 100 mW, 20 dBmSupply Voltage12 to 30 V dc, less than 100 mA, exclusive of loadSupply Protection CircuitryProtected against reverse polarity and transient overvoltagesDelay at Power-upLess than 2 secondsOutput ConfigurationBipolar NPN/PNP output, 150mA; DIP switch 6 selects N.O. (default) orN.C. operationOutput ProtectionProtected against short circuit conditionsResponse TimeDIP switches 7 & 8 select ON/OFF response timeIndicatorsPower LED: Green (power ON)Signal Strength LED: Red, flashes in proportion to signal strength.Steady on at 4x excess gain. Only indicates signal amplitude, not targetdistance.Output LEDs: Yellow (output energized) / Red (configuration)See Figure 1 on page 4ConstructionHousing: ABS/polycarbonateLightpipes: AcrylicAccess Cap: PolyesterOperating Temperature–40 °C to +65 °C (–40 °F to +149 °F)Environmental RatingIEC IP67ConnectionsIntegral 5-wire 2 m (6.5 ft) cable or M12 Euro-style QD fitting. QDmodels require a mating cordsetCertifications3.1 Beam PatternsTypical Beam Pattern (with BRTR-CC20E Radar Target, RadarCross Section = 50 m2)Typical Beam Pattern (with 4 different targets) at highest sensitivitylevelLeft-Right Beam PatternPlaceholderDistanceLeft-Right Beam PatternPlaceholderDistance1–4: Indicates sensitivity level 1: Weak Object (Radar cross section = 0.25 m2)2: Car (Radar cross section = 3 m2)3: Large Truck (Radar cross section = 50 m2)4: Passenger Train (Radar cross section = 300 m2)Note: The effective beam pattern depends on the sensitivity level and target properties.R-GAGE® Q130RA-AF Sensor6 www.bannerengineering.com - Tel: +1.763.544.3164FCC ID: UE3RGAGE1XX—This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3.2 DimensionsAll measurements are listed in millimeters [inches], unless noted otherwise. Placeholder     R-GAGE® Q130RA-AF Sensor  www.bannerengineering.com - Tel: +1.763.544.3164 7DRAFT
4 WindowsThe R-GAGE sensor can be placed behind a glass or a plastic window, but the configuration must be tested and thedistance from the sensor to the window must be determined and controlled prior to installation. There is typically a 20%signal reduction when the sensor is placed behind a window.Polycarbonate at 4 mm thickness performs well in most situations, but the performance depends on filler materials. Thinner(1 to 3 mm) windows have high reflection. The amount of reflection depends on the material, thickness, and distance fromthe sensor to the window.Locate the sensor in a position of minimum reflection from the window, which will repeat every 6.1 mm of distance betweenthe sensor and the window. The positions of maximum reflection from the window repeat between the minimums, anddecrease in effect until the window is approximately 150 mm (5.9 in) away. Consult the factory for pre-tested windowmaterials which can be used at any distance without issue.Additionally, the face of the window should be protected from flowing water and ice by use of a flow diverter or hooddirectly above the window. Falling rain or snow in the air in front of the window, light water mist, or small beads on the faceof the window are typically not an issue. However, a thick, continuous surface of water or ice directly on the face of thewindow can be detected as a dielectric boundary.R-GAGE® Q130RA-AF Sensor    8 www.bannerengineering.com - Tel: +1.763.544.3164  DRAFT
5 Accessories5.1 Quick Disconnect (QD) Cordsets5-Pin Threaded M12/Euro-Style Cordsets—with ShieldModel Length Style Dimensions Pinout (Female)MQDEC2-506 1.83 m (6 ft)Straight44 Typ.ø 14.5M12 x 1234151 = Brown2 = White3 = Blue4 = Black5 = GrayMQDEC2-515 4.57 m (15 ft)MQDEC2-530 9.14 m (30 ft)MQDEC2-550 15.2 m (50 ft)MQDEC2-506RA 1.83 m (6 ft)Right-Angle32 Typ.[1.26"]30 Typ.[1.18"]ø 14.5 [0.57"]M12 x 1MQDEC2-515RA 4.57 m (15 ft)MQDEC2-530RA 9.14 m (30 ft)MQDEC2-550RA 15.2 m (50 ft)Note: Pin 5 is not used.5.2 Brackets and EnclosuresSMBQ240SS1•Sensor mounting plate andpivoting bracket• Provides ± 20° of tilt in oneaxis for enhanced sensoralignment• 12 gauge stainless steel• Sensor can mount onbracket horizontally orverticallySMBQ240SS2•Add-on accessory to beused in conjunction withSMBQ240SS1• Provides ± 20° of tilt insecond axis for maximumcontrol of sensor alignment• 12 gauge stainless steelSMBWSQ120•Rear-Mount ProtectiveMetal Enclosure• Supports both horizontaland vertical sensormounting• Required if the R-GAGE isexposed to rain or snow• Prevents buildup of water orice from interfering withsensor performance      R-GAGE® Q130RA-AF Sensor  www.bannerengineering.com - Tel: +1.763.544.3164 9DRAFT
6 Banner Engineering Corp. Limited WarrantyBanner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. willrepair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. Thiswarranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANYWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALINGOR TRADE USAGE.This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BELIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL ORSPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT ORWARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any productpreviously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protectionapplications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approvalby Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify productspecifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the mostrecent version of any documentation, refer to: www.bannerengineering.com.For patent information, see www.bannerengineering.com/patents.R-GAGE® Q130RA-AF Sensor    10 www.bannerengineering.com - Tel: +1.763.544.3164  DRAFT

Navigation menu