BagelLabs BAGEL001 Bagel Smart Tape Measure User Manual

BagelLabs co.,Ltd. Bagel Smart Tape Measure

User manual

Dimensions 80 x 80 x 30mm (L x W x H)Weight 118gVoltage Input: 5V DC / Driving: 3.3V DCDisplay 0.96” OLED (128x64)Storage Capacity 32MBBaeryBuilt-in rechargeable Li-Po (500mAh, 3.7V DC)Wireless Connecvity Bluetooth 4.0 BLE (Only)Laser Voltage: 3V DC / Current: <25mA, Wavelength 660nm Red / Class: 2Materials Polycarbonate Casing / Dyneema StringCompable OS Android, iOSMeasurement Range String : 0-300cm (0-9’ 10’’)Wheel: 0-999cm (0-32’ 9’’)Remote: 30cm - 500cm (1’-16’ 4’’)Bluetooth Frequency 2.4GHzTurn the device on by pressing the Power Button Select a measurement mode (String/Wheel/Remote).Press the Mode/Settings button to enter mode menu. Press the Mode/Settings button again to switch between modes.String Mode: Pull out the hook/string.Wheel Mode: Roll the wheel in the direcon guided by the wheel guide laser.Remote Mode: Point the ultrasonic sensor at the target of measurement.Bagel has three modes of measurement: String, Wheel, and Remote.→ → To view your measurements on the device:Press and hold the save button to view logs .Use the wheel or MODE/SETTINGS BUTTON to scroll through saved measurements.To delete a measurement, press the save button and select “Yes”.To delete all measurements, hold the save button and select “Yes”.You can leave the menu by clicking the cancel/bluetooth button .Factory default me zone may differ from yours. You can sync Bagel's me zone to yours by pairing the device with a smartphone (Secon 03).You can save your measurement with a simple buon click.Press the save button once to save the measurement shown on the digital display.On the “Voice Memo?” screen, use the WHEEL or MODE/SETTINGS BUTTON to select “Yes” in order to record a voice memo.Alternavely, select “No” to save without a voice memo.Adding a voice tag to your measurement is oponal and you can always add or edit tags through Bagel’s mobile app.To pair Bagel with your smartphone:Aer pairing is complete, we recommend running the app tutorial to learn how to sync Bagel’s data.Press and hold the cancel/bluetooth button to enter pairing mode on Bagel.Download and install the Bagel Labs mobile app from hp://www.bagel-labs.com. “Pairing…” should show up on the digital display.On the mobile app, enter the sengs menu by clicking the buon.Click on [Bluetooth Pairing] to start the scan for Bagel. Changing the Unit of MeasurePress and hold the mode/setting button to enter sengs menu.Scroll through menus using the wheel or mode/setting button to highlight [Units].Press the save button to enter. Use the wheel or mode/setting button to select [cm], [in], or [mm].Press the save button to save and exit. Or, press the cancel/bluetooth button to return to sengs menu without saving.Turning Laser Guide ON/OFFPress and hold the mode/setting button to enter sengs menu.Scroll through menus to highlight [Laser] and enter.Select [On] or [Off].Press the save button to save and exit. Or, press the cancel/bluetooth button to return to sengs menu without saving.Seng Inside/Outside MeasurementsBy default, Bagel’s measurements start from 0 (Offset seng OFF). If you want to make inside measurements, e.g. length of window sill, you can set Bagel to offset mode (Offset seng ON). Then, Bagel’s measurements will start from 8cm (3.15”), which is the diameter of Bagel. Press and hold the mode/setting button to enter sengs menu.Scroll through menus to highlight [Offset] and enter.Select [On] or [Off].Press the save button to save and exit. Or, press the cancel/bluetooth button to return to return to sengs menu without saving.Charging the baery before use is recommended but not required.Bagel ships pre-charged but inial charge will vary.To charge Bagel, simply connect the included micro USB cable to the charging port.The LED STATUS INDICATOR should turn red while charging. Bagel will display “Low baery” at 5%.Full discharge of the baery can reset the Real Time Clock (RTC) and cause me inaccuracy. To resynchronize me, pair Bagel with its mobile app.This device can be operated while charging.Note: The micro USB port is for charging purpose only and does not support data transfer.
DO NOT subject the device to extreme temperatures or variaons in temperature. Avoid heavy impact or falling of the device.DO NOT use the string on sharp edges.DO NOT expose the device to connuous vibraon.DO NOT expose the device to extremely hot or cold temperatures.Always store the device indoors.Always keep the device free of dust, water, and direct sunlight.Clean the tool with a damp cloth.DO NOT disassemble or modify the device in any way.DO NOT aempt to change any part of the laser lens.Full discharge of the baery can reset the Real Time Clock (RTC) and cause me inaccuracy.String mode accuracy can be influenced by the speed of pull and retracon. Avoid pulling the string too quickly or completely leng it go to ensure maximum accuracy. Pulling the string no faster than 50cm/s (20in/s) and retracng no faster than 10m/s (4in/s) is required for accuracy.When you retract the string too quickly, Bagel will display "!", nofying that the measurement may be out of its accuracy range. In this case, you can press the MODE/SETTINGS BUTTON to reset Bagel's measurement to zero.In string mode, the digital display may somemes malfuncon due to string tension affecng Bagel's sensor. This is a temporary glitch and you can fix it by restarng the device.Read all instrucons. Failure to follow all instrucons listed below may result in hazardous radiaon exposure, electric shock, fire, choking and/or serious injury.Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiaon exposure.Have the device repaired only through qualified specialist using original spare parts.This ensures that the safety of the device is maintained. DO NOT use this device for any purpose other than those outlined in this manual.DO NOT leave the device “ON” unaended in any normal operang mode.DO NOT disassemble the device. There are no user serviceable parts inside.Disassembling the device will void all warranes on the device.DO NOT modify the device in any way. Modifying the device may result in hazardous laser radiaon exposure.Bagel Labs (“Seller”) warrants to the original purchaser only, that Bagel Smart Tape Measure will be free from defects in material or workmanship for a period of one (1) year from date of purchase. SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permied by law, any warranty or condion impliedby law, shall be the repair of replacement of parts, without charge, which aredefecve in material or workmanship and which have not been misused, carelesslyhandled, or misrepaired by persons other than Seller or Authorized Service Center.To make a claim under this Limited Warranty, you must return the complete BagelSmart Tape Measure, transportaon prepaid, to any Seller’s Factory ServiceCenter or Authorized Service Center. Please include a dated proof of purchasewith your tool. For locaons of service centers visit hp://www.bagel-labs.com.THIS LIMITED WARRANTY DOES NOT APPLY TO OTHER ACCESSORY ITEMS ANDRELATED ITEMS. FCC ID : 2AJ8I-BAGEL001FCC COMPLIANCE STATEMENT:This device complies with part 15 of the FCC Rules.Operaon is subject to the following two condions:(1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operaon.INFORMATION TO USER:This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protecon againstharmful interference in a residenal installaon. This equipment generates, uses, and can radiateradio frequency energy. If not installed and used in accordance with the instrucons, it may causeharmful interference to radio communicaons. However, there is no guarantee that interference willnot occur in a parcular installaon. If this equipment does cause harmful interference to radio ortelevision recepon, which can be determined by tuning the equipment off and on, the user is encouragedto try and correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna- Increase the distance between the equipment and the receiver.- Connect the equipment to outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.WARNING:Changes or modificaons (including on the antenna) not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment.LASER CLASSIFICATION:This device produces visible laser beams, which are emied from the instrument:It is a Class 2 laser product in accordance with EN 60825-1: 2007 “Safety of Laser Product”.Laser Class2 Products:Do not stare into the laser beam or direct it towards other people unnecessarily.Eye protecon is normally afforded by aversion responses including the blink reflex.NEVER aim the beams at a workplace with a reflecve surface. Bright shiny reflecve sheet steel or similar reflecve surfaces are not recommended for laser use. Reflecve surfaces could direct the beams back towards the operator.DO NOT allow children to use the device without supervision. The string can cause strangulaon and children could unintenonally blind other persons.The use of opcal instruments with this device will increase eye hazards.

Navigation menu