BRAVEN LC BRV1S Bluetooth Speaker User Manual

BRAVEN LC Bluetooth Speaker

user manual

BRAVEN BRV-1s OWNER’S GUIDE
23Full manual and troubleshooting: braven.com/manualsENGGET TO KNOW YOUR BRAVENBATTERY INDICATOR LIGHTSPOWER SWITCHBATTERY CHECK BUTTONPAIRING / ANSWER-END CALL /PAUSE-RESUME MUSICPOWER / PAIRING STATUS LIGHTBRAVEN CHARGING PORTVOLUME UP /SKIP TRACK (press and hold)EXTERNAL USB CHARGING PORT RESET BUTTON VOLUME DOWN / SKIP BACK (press and hold)3.5 MM AUDIO-IN JACK 20% - 40% - 60% - 80% - 100%TURN ON & BLUETOOTH PAIRING1. Press the Power button for 2-3 seconds to turn on your BRAVEN (BRV-1s). Press the same button again for 2-3 seconds to turn your BRAVEN off.2. Activate Bluetooth® on the phone or device you are pairing with (see your device’s instruction manual for information on activating its Bluetooth® settings).3. Press and hold the Play Button on your BRAVEN until you hear the BRAVEN pairing sound.4. Go to your phone or device’s Bluetooth® settings and select “BRAVEN BRV-1s” from the list.5. If asked for a passcode enter “0000” Your BRAVEN will remember the last 8 devices it has paired with.NOTE: If your BRAVEN does not have an active Bluetooth® connection and is left on, it will shut itself o after 30 minutes. To restart your BRAVEN you will need to press and hold the power button for 2-3 seconds.
45Full manual and troubleshooting: braven.com/manualsENGCHARGING YOUR BRAVEN• Before using your BRAVEN for the first time, charge the unit until all 5 Battery Capacity lights are solid (not flashing), indicating a full charge (typically 2 to 3 hours).• To charge your BRAVEN, plug the included USB-to-Micro-USB cable into a wall power adapter (not included) or into a powered USB port on a computer. Plug the Micro-USB connector end of the cable into the BRAVEN charging port. Your BRAVEN is designed to charge USB devices that draw from 0.3A - 1A (most cell phones & mp3 players – tablets and other 2A devices cannot be charged by your BRV-1s) using the full-sized USB port located behind the cap. To use external charging: 1. Turn your BRAVEN on.2. Plug the USB power cable that came with your phone, mp3 player, or other mobile device into the USB port on your BRAVEN.3. Plug the other end of the cable into your mobile device, and it will immediately begin charging.CHARGING EXTERNAL DEVICES SPEAKERPHONE• Press the Answer-End button on your BRAVEN to answer the call over the speaker. Press the Answer-End button again to end the call. • The BRV-1s is IPX7 Waterproof, and is designed to withstand rainfall, water jets, and water splashing.• IMPORTANT - To ensure your BRAVEN BRV-1s speaker is prepared for use in a wet environment, remove all cable connections and tightly close the rear water cap. If the water cap is not properly closed, the BRV-1s will not be water resistant.WATERPROOF FEATURES
TUTORIALS: www.braven.com/tutorialsPHONE: 1-877-9 BRAVEN (1-877-927-2836)SUPPORT: www.braven.com/supportEMAIL: support@braven.comONLINE: www.braven.comMANUAL: www.braven.com/manualsV1

Navigation menu