BEIJING FIMI TECHNOLOGY FXQ02FM Mi Drone User Manual TempConfidential 2

BEIJING FIMI TECHNOLOGY LIMITED Mi Drone TempConfidential 2

Contents

TempConfidential_User Manual-2

15Choose Wireless Adaptor to connect the radio controller and mobile device1 . Open Mi Drone APP, select “ Next” button. 2 . Select “Wi-Fi connection” on the dialog box, tap “ OK” button. .1 . Connect “MiRC_XXXXXX” device, the default key is “ 123456789”.2 . Back to Mi Drone APP, APP will complete connection and go to MAP page automatically.
16Operation Guide1. Running Mi Drone APP2. Aircraft Direction3. Power on the aircraft and the radio controller Please ensure Mi Drone APP is running and mobile device, radio controller and aircraft are correct connection, then motor can start to workThe same method to power on/off the aircraft and the radio controller...Front DirectionGreen LightRed LightWhite Light White LightBattery is at the aircraft tail direction, gimbal camera is at the aircraft head direction. When the aircarft is turned on, White color light indicate the head direction, red color light and green color light indicate the tail direction. Note: During the flight, end-user should try to keep facing the tail direction always. .Press once to check the battery level.Press once, then again and hold to turn on/off
17Sticks setting can be changed in the Mi Drone APPLeft StickUpAnti-Clockwise Rotation Clockwise RotationTurn LeftTurn rightRight StickForwardDown BackwardOperation Guide4. Radio Controller Sticks UpForwardHead Direction Clockwise RotationTurn L eftBackwardDownAnti-Clockwise RotationNote: The orienations shown as above figure are base on the head direction. Turn Right
18Operation Guide5. Take-off and LandingPush left stick upward slowly and steadilyLeft Stick Right StickPullSlowlyPull and keep 2 sticks into shape VRelease 2 sticks when motors start rotatingLeft stick down slowly untill aircraft touch the ground. Hold left stick down at max level a few seconds untill motors stop rotating.Left stick up slowly to take off. Note: Before taking off, please ensure both key lights on the radio controller is white color. Note: Once need to stop motors rotation emergency, please press and hold 2 keys a few seconds untill motors stop rotating.
19Operation Guide6.Gimbal Camera Power Up7.Gimbal Camera Tilt Angle Control 8.Take picture and vedioGimbal camera will start self-test and go into steady mode when aircraft is turned on. Use the left roller on the radio controller to control gimbal camera tilt angle. The controllable angle range is 0° ~ 90°. Picture ButtonVedio Buttonhere are 2 beeps when press picture button to take one picture. There are 2 beeps when press vedio button to start vedio recording, and 4 beeps when press vedio button again to stop vedio recording.During vedio recording, the power key on the radio controller will show notify light.
20Operation Guide9. Radio controller quick lanuch buttonSet the aircraft to the home mode. The aircraft will return to the last recorded Home Point and landing automatically. .The auto return to home function can be interrupted when set the aircraft to the normal flight mode. .The right roller on the radio controller can adjust the aircraft white light brightness. ( The fucntion redefinition can be set by Mi Drone APP. ).Press once, then again and hold a few seconds to make the aircraft take off automatically..Press once, then again and hold a few seconds to make the aircraft landing automatically. .Note: Only when key light is white color, The Auto Takeoff and Auto Landing fucntion can be effective.
21Maintenance and Calibration1 .Propellers2.Propeller frames (Option)6.Matching OperationPropeller is liable to be damaged. please replace it with new one immediately once any damage happened. Damaged proellers will seriously affect flight performance. When the aircraft or the radio controller were replaced, the matching operation is needed between the aircraft and the radio controller. 1.Power up the aircraft2.Power up the radio controller and waiting 15 seconds. Then press and hold the radio controller power key untill the radio controller is beeping. 3.Remove the gimbal cover on the aircraft. Press matching key 1 second and release it. 4.When the power key light on the radio controller change to the white color, the matching operation is sucessful. Propeller frame is liable to be damaged. please replace it with new one once any damage happened. 5.Compass CalibrationIn order to ensure flight safety. Mi Drone APP will notify and instruct the aircraft to do compass calibration when magnetic field environment is changed. 3.Battery4.Aircraft Self Diagnostic TestTo avoid fire, serious injury, and property damage. Use of battery in low tempreture can reduce battery capacity seriously. DO NOT use the battery below -5°. The aircraft will run self diagnostic test at each time power up. Mi Drone APP will show error message once failure happen.
22Maintenance and Calibration7. Wireless Adaptor 8.Sticks calibration1. Some model mobile devcie will show “No Internet assess” when wireless adaptor connected with the radio controller, please select “leave you on the same network”. 2. To avoid any mismatching when several radio controller and several wireless adaptor to run pairing at the same time in one place, recommend that end user to change the wireless adaptor's SSID and Key3. Once wireless adaptor's SSID or Key are changed, End user need to set KEY again when the first time pairing4. The wireless adaptor and the radio controller are paired using. Wireless adaptor's SSID and Key will back to default value when the radio controller is changed to a new one. Sticks need to do calibration if the radion controller is beeping when power up. Please follow Mi Drone APP instuction to do sticks calibration.Note: Please ensure the aircraft is power off before sticks calibration.
23Indicator Description1. Aircraft Indicator Description 3. Radio Controller Indicator Description2. Gimbal Camera Indicator Description Slow White, green and red light flashing Self diagnostic testIndicator StatusSelf diagnostic test is passed, aircraft is at ready status3Solid White, green and red lightSolid white lightSlow red and green light flashingWhite, green and red light flashingFast white, green and red light flashingSelf diagnostic test is failedNote: Mi Drone APP will report error messageLow battery warningCritical low battery warningSolid white light Image transmission connection is ready.Status12345Slow white light flashing Image transmission connection is not ready.Solid red light Camera is readySlow red light flashing Vedio recordingWhite and red light flashing Firmware upgrading.IndicatorSolid Power Key red light The connection between the aircraft and the radio controller is not ready123456Indicator StatusSolid Power Key white lightPower Key red light flashingPower Key white light flashingSolid Auto Takeoff/Land key red lightSolid Auto Takeoff/Land key white light The connection beteen the aircraft and the radio controller is readyIn matching modeFirmware upgradingAuto take off and landing function is disableAuto take off and landing function is enable
24SpecificationsAccessoriesAircraftModel: WRJTZ02FMSize: 310 x 380 x 190mmDiagonal Size: 434mmWeight: 0.75Kg(w/o battery)Wireless adapterModel: WRJDG01FMSize: 45 x 18 x 8.4mmWeight: 5.10goperation frequency: 2.4GWireless: BatteryType: Rechargeable Li-ion Polymer BatteryCapacity: 5100mAh/15.2V(77.52Wh)ChargerInput: 100-240V~ 50/60Hz 1.5AOutput: 16V 2.9ACameraWeight: 0.18KgAperture: f/2.8Focus: (35mm format equivalent: 20mm)Max Vedio recording Mode: 3840 x 2160p/30fpsMax Image Size: 4072 x 3044Max Bitrate Of Vedio: 65MbpsRadio ControllerWeight: 0.47KgFrequency Band: 5GHzBattery Type: Li-ion BatteryBattery Capacity: 5000mAh/3.7V(18.5Wh) Charging input: 5V 2AWorking Temperature: 0-40Working Altiture: 不大于5000m 222
25Regulatory Notice for Users in EUHereby, Fimi declares that the wireless equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.WEEE Disposal and Recycling Information
Federal Communications Commission Declaration of Conformity26This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Fimi is not responsible for any radio or television interference caused by using other than specified orrecommended cables and connectors or by unauthorized changes or modifications to this equipment.Unauthorized changes or modifications could void the user's authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Responsible Party:
Regulatory Notice for Users in USA27USA — Federal Communications Commission (FCC)This device are granted with following FCC ID by Federal Communications Commission (FCC) FCC ID：2AG53FXQ02FM Name：Mi Drone Model：FXQ02FMFCC ID: 2AG53YKQ02FM Name：Radio Controller Model：YKQ02FMFCC ID: 2AG53WRJDG01FM Name：Wireless Adapter Model：WRJDG01FM RF exposure warningantenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.SA R Statement(only apply to FCC ID: 2AG 53YKQ02 FM IC: 21 054-YKQ02FM IC: 21 054-WRJDG01FM Name：Rad io Controller Model：YKQ02FM FCC ID: 2AG53WRJDG01FM Name：Wireless Adapter )SA R Dé clarat ionThis equipment comp lies with FCC &ISED SA R limits ,the highest SAR value re ported to t he FCC and ISED for t his device is YKQ02FM: 1.08W / KG; WRJDG01FM:0.463W / KG.Cet équipement est confor me aux limites FCC &ISED SA R, la valeur SA R la plus élevée rap portée à la FCC et ISED pour cet appare il est YKQ02FM: 1.08W / KG; WRJDG01FM:0.463W / KG.Model：WRJDG01FM
Regulatory Notice for Users in CanadaThis device are granted with following IC ID by Industry Canada (IC ) Name：Model：WRJDG01FMWRJDG01FM Name：Mi Drone Model：FXQ02FM Name：Radio Controller Model：YKQ02FMIC StatementThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 28This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.Industry Canada Class B Emission Compliance StatementWireless adapter
29IC RF Exposure statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.i. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; andi. pour les dispositifs munis d'antennes amovibles, le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée pour l'exploitation point à point et l'exploitation non point à point, selon le cas;

Navigation menu