BEIJING FIMI TECHNOLOGY FXQ02FM Mi Drone User Manual TempConfidential 1

BEIJING FIMI TECHNOLOGY LIMITED Mi Drone TempConfidential 1

Contents

TempConfidential_User Manual-1

Mi Drone User GuidePlease read this manual carefully before using
2AttentionThis product is only for adults over 18 years old. .Fly in open area. Keep enough distance from people, animals, trees, vehicles and buildings etc. Be away from the circumstances such as airports, railways, high ways, tall buildings and electric wires etc.The flying height, distance and zone are limited by relevant laws and regulations set forth by government. All operator should compliance with safety precautions during using this product......Scan & Install Mi Drone App
3MotorUndercarriageUndercarriage LockAuxillary Positioning Module (Option)Battery CompartmentLightProducts & Accessories1. Aircraft
4Mobile Device Holder Left StickBelt HoleNormal Flight/Auto Return Mode SwitchAntennaRight RollerButton BButton ALeft RollerPower ButtonBattery Indicator Auto Take-off/Landing ButtonRight StickUSB Port(Connect Radio Controller and mobile device)Products & Accessories2. Radio ControllerCharging Port
5TF Card PortMicro-USB PortCamera LensConnection IndicatorShock-Absorbing FrameShooting IndicatorRotate UpwardsProducts & Accessories3. Integraded Gimbal Camera
6Quick-detachable PropellersBattery ChargerUSB Cable Wireless AdapterBattery5. Tool Box4. Accessories for QuadcopterProducts & Accessories
100～240 V72. Charge the Radio Controller 5V 2AHighLowIndicator* Both battery ports could be usedLowHighIndicator PowerCharging1. Charge the BatteryThe indicator will be blinking during the chargingThe indicator will be turned off when chariging is completed ..The indicator will be blinking during the chargingThe indicator will be turned off when chariging is completed ..
8Prepare1. Prepare the Aircrafta. UndercarriageTurn down the undercarriage till hear clicking sound；Note: Before flight, the undercarriage MUST be turned down. Turn and hold the undercarriage lock to unlockposition;Pull up the undercarriage.Undercarriage lock
9b. Battery c. Protective FramePlease use included screws and driver to assemble propeller frames.Two screws are needed on every propeller frame...Push the battery into the batterycompartment till hear clicking sound. Press the battery assemble switch then can pull out the battery...Battery Assemble Switch
10d. Propellers...Check propeller cap is on unlock positionPut the propellers on the top of motors with same color marks.Press the propeller down onto the motor and rotate the propeller cap in the lock direction untill it is secured. .Rotate the propeller cap in the unlock direction untill the propeller jump up, then propeller can be removed. Color MarkDisassembleAssemble
.11Please choose mainstream band TF cards, Class 10 and 16G at least.Insert TF CardPrepare the Gimbal CameraTF Card PortUSB PortUpwards rotate 90°Turn and keep the gimbal switch to unlock position, remove the gimbal cover. Insert gimbal camera into the cavity with 45° tilt degree, press gimbal camera down firmly till hear click sound.
12Unfold the antennas as shown figure. Note:Please keep the vertical surface of antennas toward aircraft to get the more stable singnal level. Pull out moble device holder untill the clip pop up. Prepare the Radio ControllerClip
13Place the mobile device on the holder, please beware of the mobile device's power key not be touched. Open the cover on the bottom of radio controllerConnect the radio controller with mobile device by USB cable or wireless adaptor..Refer to Mi Drone APP instruction to complete connection. Note: Due to size limitation, Some mobile device MAY NOT be placed on the holder. ..
14Choose USB cable to connect the radio controller and mobile device1 . Open Mi Drone APP, select “ Next” button 2 . Pop up dialog box, select “USB connection”, tap “ OK” button .1 . Open Mi Drone APP, select “ Next” button 2 . Pop up dialog box, select “USB connection”, tap “ OK” button

Navigation menu