B LINK ELECTRONIC BL-LW08-5 WLAN 11b/g/n MINI PCIE MODULE User Manual BL LW08 5 8

B-LINK ELECTRONIC LIMITED WLAN 11b/g/n MINI PCIE MODULE BL LW08 5 8

User Manual

50 430*187*90mmRTL8192CE ChipsetBL-LW08-529.8mm26.5mmPackage Size：Product FeaturesProduct descriptionProduct SpecificationsBulkNet weight (kg) Gross weight (kg) Cubic meter(mm)Pcs/box CartonMINI PCI-E 300M WIRELESS MODULE This product is a high-speed PCI-E wireless modules, interconnected with other wireless devices to meet the standards, support for th e la te st 64 / 1 2 8 b i t WE P d a t a en c r y p t i o n , s u p port WPA -P S K / WP A 2 -P S K , WPA/WPA2 security mechanism.This product uses the 11N w i r el e s s technology, compatible IEEE802.11b/g/n standard wireless transmission speeds up to 300Mbps. Compared the traditional 54Mbps11g products and 150Mbps products, with higher wireless b a nd w i d t h within the LAN data transmission more efficient, and effective in reducing the network delay, so that voice and video, online games, online on demand is more fluid.◎ Support standards: the IEEE 802.11b, the IEEE 802.11g, the IEEE 802.11n◎ Automatically detect the network and the transmission rate◎ Support 64/128 bit WEP data encryption, support WPA-PSK/ WPA2-PSK, WPA/WPA2 security to protect wireless network Infringement and misappropriation◎ Support WMM, voice and video services to more fluid The◎ Installation and configuration simple, plug and play, fast and convenient◎ Support Windows XP/Vista/WIN7/LINUX operating system PSP网络摄像头GPS数码相框Table PCDigital photo frameNetbooksItemIEEE 802.11b,IEEE 802.11g, IEEE 802.11n 2.4-2.4835GHzTransmission rate15dBm(MAX) Interface Type11Working channel Description29.8*26.5 mm*1Master Model RTL8192CE300 Mbps(MAX)PCI Express270M: -73dBm@10% PER 130M: -73dBm@10% PER108M: -73dBm@10% PER 54M: -73dBm@10% PER11M: -85dBm@8% PER 6M: -88dBm@10% PER1M: -90dBm@8% PERWindows XP/Vista/WIN7 LINUX/StandardsFrequency RangeWork ModeAd-HocInfrastructureSupport Operating SystemWireless Range Indoors up to 100m, Outdoors up to300m.Wireless Transmit PowerReceiver Sensitivity Operating Temperature 0 C~40 C Operating Humidity 10% ~ 90%, non condensation Storage Humidity 5%~90%, non condensation Dimensions°° Storage Temperature -40 C~70 C°°Add:NO 268,FuQian Rd,Jutang Community,GuanLan Town BaoAn District,ShenZhen,518110,ChinaTel:+86-755-28023440 Fax:+86-755-28029002 Email:sales@lefen.com http//www.lefen.com 2mm 1mmWeb camera
This WLAN 11b/g/n 2x2 MINI PCIE MODULE has two exactly the same antenna which is the Integral Dipole Antenna with 1 dBi gain. FCC ID: X2NBL-LW08-5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device complies with industry Canada license-exempt RSS standard(s). Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." For product available in the UAS/Canada market, ony channel 1-11 can be operated, selection of other channels is not possible.
IMPORTANT NOTE: Integration is strictly limited to mobile/fixed categorized end-products where a separation distance of at least 20 cm between the radiating part and any human body can be assured during normal operating conditions. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter).then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. IMPORTANT NOTE: This module is intended for OEM integrator only and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following “Contains TX FCC ID: X2NBL-LW08-5” .If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu