Axxcelera Broand Wireless APC4-365 ExelIMAX Access Point User Manual

Axxcelera Broadband Wireless, Inc. ExelIMAX Access Point Users Manual

Users Manual

ExcelMAX® Access Point Cell Installation & Maintenance GuideVersion 1.4 April 30, 2008
Copyright 2006-2008 Axxcelera All rights reserved.Information Subject to Change without NoticeAxxcelera reserves the absolute right to make changes to the information set forth in this Product Manual without notice. Specifications subject to change without notice. Customers may inquire as to whether they have the most current Product Manual by contacting Axxcelera Technical Support Department.Proprietary RightsAxxcelera, Axxcelera Broadband Wireless, and the Axxcelera logo are all trademarks of Axxcelera. All other company and product names referenced herein are the trademarks of their respective holders.Axxcelera reserves all copyright, trademark, trade name, service mark, intellectual property, proprietary and other rights to this Product Manual and the diagrams, schematics and all other information contained herein, and nothing shall give Customer any legal, license or other interest in the Product Manual or such diagrams, schematics or other information. Customer agrees not to reproduce or copy by any means any portion of this Product Manual without Axxcelera’s prior written permission in each case. Other than as expressly specified herein, Axxcelera grants no license to Customer under any copyrights or other proprietary rights to use or reproduce any portion of this Product Manual.No LiabilityAxxcelera makes no warranties with respect to this Product Manual of any kind. WITHOUT LIMITATION, AXXCELERA DISCLAIMS ALL WARRANTIES; EXPRESS OR IMPLIED, INCLUDING LIMITED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF DEALING OR TRADE USAGE. WITH RESPECT TO THIS PRODUCT MANUAL, IN NO EVENT SHALL AXXCELERA BE LIABLE TO ANY THIRD PARTY FOR ANY DAMAGES, INCLUDING INDIRECT, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR LIABILITY FOR LOSS OF DATA, LOSS OF PROFITS OR ATTORNEY’S FEES, REGARDLESS OF THE FORM OF THE ACTION OR WHETHER AXXCELERA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.LICENSE ISSUESThe OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.orgOpenSSL LicenseCopyright (c) 1998-2003 The OpenSSL Project. All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistribution of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project.6. Redistributions of any form whatsoever must retain the following acknowledgement: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS AND SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com)Original SSLeay LicenseCopyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscape SSL.This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).” The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related. :-)4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This product includes software written by Tim Hudson (tjh@cryptsoft.com).”THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.The license and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution license (including the GNU Public License).
TABLE OF CONTENTS5 OF 651.0 Preface ..................................................................................................................................................71.1 Who Should Read This Manual ......................................................................................................71.2 Using This Guide .............................................................................................................................71.3 Conventions Used ...........................................................................................................................71.4 Related Documentation ...................................................................................................................71.5 Technical Support ..........................................................................................................................81.6 Sales ...............................................................................................................................................82.0 Introduction ..........................................................................................................................................92.1 ExcelMAX Access Point Packing List .............................................................................................92.2 ExcelMAX Access Point Overview ..................................................................................................92.2.1 ExcelMAX Access Point ........................................................................................................102.2.1.1 OPTIONAL: GPS Synchronization ...............................................................................122.3 Major Components ........................................................................................................................122.3.1 Indoor Equipment ..................................................................................................................122.3.1.1 AC NIA/Power Adapter .................................................................................................122.3.1.2 DC NIA/Power Adapter ................................................................................................132.3.2 Interconnecting cable ............................................................................................................142.3.3 Outdoor Equipment ...............................................................................................................153.0 Installation ..........................................................................................................................................163.1 Compliance Alert – Operation in the 3.4 - 3.6 GHz Band .............................................................163.2 Operation in the 3.650 - 3.675 GHz Band .....................................................................................163.2.1 FCC Information to Users @ FCC 15.21 & 15.105 ...............................................................163.2.2 Warning to Users @ FCC 15.21 & 15.105: ...........................................................................163.2.3 FCC Label @ FCC 15.19 ......................................................................................................173.2.4 RF EXPOSURE REQUIRMENTS @ 1.1310 & 2.1091 .........................................................173.3 Installation Warnings .....................................................................................................................173.4 Environmental Cautions ................................................................................................................173.5 Installing Outdoor Equipment ........................................................................................................183.5.1 Access Point Packing List .....................................................................................................183.5.2 Sector Antenna Packing List .................................................................................................183.5.3 Omnidirectional Antenna Packing List ..................................................................................183.5.4 Customer Supplied Equipment Required for Antenna Installation ........................................183.5.5 Antenna Site Requirements .................................................................................................183.5.6 Required Tools for Outdoor Installation ................................................................................193.5.7 Preparing to Mount the Antenna Brackets ............................................................................193.6 Installing an Optional Sector Antenna ...........................................................................................203.6.1 Grounding the Antenna Mounting .........................................................................................203.6.2 Attaching the Sector Antenna to the Mounting Points ..........................................................213.6.3 Attaching RF Cable to Access Point .....................................................................................293.6.4 Grounding the Cables ...........................................................................................................303.6.5 Waterproofing Cable Connections ........................................................................................303.7 Installing Optional Omnidirectional Antenna .................................................................................313.7.1 Grounding the Antenna Mounting .........................................................................................313.7.2 Installing the Omnidirectional Antenna .................................................................................313.7.3 Attaching RF Cable to Access Point .....................................................................................333.7.4 Grounding the Cables ...........................................................................................................333.7.5 Waterproofing Cable Connections ........................................................................................343.8 Installing the Access Point ............................................................................................................343.8.1 Mounting L-bracket to the Access Point ...............................................................................343.8.2 Mounting Access Point to the Pole .......................................................................................353.8.3 Aligning the Access Point .....................................................................................................363.8.4 Attaching the Ground Wire (recommended) ........................................................................373.8.5 Attaching the Cat-5 Cable ....................................................................................................383.9 Power and Data Connections – AC and DC Power Options .........................................................40
TABLE OF CONTENTS6 OF 653.9.1 AC PSU/NIA Option ..............................................................................................................413.9.1.1 Connecting the Access Point to the AC Power Supply/NIA .........................................413.9.1.2 Completing the Connection of the AC Power Supply/NIA ..........................................423.9.2 DC PSU/NIA Option ..............................................................................................................453.9.2.1 Connecting the Access Point to the DC Power Supply/NIA ........................................463.9.2.2 Completing the Connection of the DC Power Supply/NIA ..........................................474.0 Configuring an Access Point for Single-Channel Use ...................................................................504.1 Logging into the Access Point Web Page .....................................................................................514.1.3 Configuring IP Address Settings ...........................................................................................534.1.4 Configuring System Information Settings .............................................................................544.1.5 Completing Access Point Setup ............................................................................................554.1.6 Power Settings for Operation in the 3.650 - 3.675 GHz Band ..............................................575.0 Maintenance Guide ............................................................................................................................59A NIA/Power Adapter Specifications: Model # TR60A-POE-L .............................................................60B ExcelMax DC PSU/NIA (020-44109-0802) ...........................................................................................61C Glossary of Terms and Abbreviations ...............................................................................................62Index ..........................................................................................................................................................64
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.47 OF 651.0 PrefaceThe ExcelMAX Access Point Cell Installation and Maintenance Guide covers installation, configuration and maintenance of the ExcelMAX Access Point Base Station.This guide assumes a working knowledge of wireless technology and how to configure networking systems.1.1 Who Should Read This ManualThe ExcelMAX Access Point Cell Installation and Maintenance Guide is for Axxcelera trained or authorized service personnel who need to install the ExcelMAX Access Point and configure it to operate in a network environment.1.2 Using This GuideThe ExcelMAX Access Point Cell Installation and Maintenance Guide explains how to install the physical components and then configure them for use. It includes a maintenance section and troubleshooting guidelines.1.3 Conventions UsedThis manual uses the following text formatting conventions:• Bold Text indicates a specific module, field, window, or button.• Italic Text highlights the name of other documents or references.• Text in angle brackets indicates individual keystrokes. For example, <Enter>.• Fixed width text identifies a specific file or directory.1.4 Related DocumentationThe following documents may also be useful:• Access Point Manager User’s Guide• CPE Manager User’s Guide• ExcelMAX CPE Installation Guide• Base Station Plan Editor User’s Guide• Plan Concepts Warning Note Tip HintText within boxes indicates warnings, notes, helpful tips and hints.NTH
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.48 OF 651.5 Technical SupportAxxcelera provides technical support to assist with any problems or to answer questions about Axxcelera ExcelMAX solutions. The technical support staff is factory trained and equipped to resolve questions about Axxcelera products.1.6 SalesYou may contact the Sales Department for more information:Telephone: +1 (804) 864-4222Email: support@axxcelera.comWeb site: www.axxcelera.comTelephone: +1 (480) 820-9270Fax: +1 (480) 820-9275Email: sales@axxcelera.com Web site: www.axxcelera.com
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.49 OF 652.0 IntroductionThis chapter covers the following information:• ExcelMAX Access Point Packing List• ExcelMAX Access Point Overview• Major Components2.1 ExcelMAX Access Point Packing ListThe Access Point kit includes:• 1 Access Point• 1 L-bracket• 1 clamp• 1 U-bolt• 1 PG-11 cable gland• 1 PG-11 cable gland o-ring• 1 ground lug• 5 hex head bolts, M6 x 16 mm Lg• 5 M6 split lock washers• 1 M6 flat washer• 2 M6 serrated flange nut• GPS antenna (optional)• 1 AC or DC NIA/Power Adapter (power cable not included, supplied by the service provider*) * AC power cables are included 2.2 ExcelMAX Access Point OverviewExcelMAX Access Points contain modem and radio circuitry that connects to an external sectorized or omnidirectional antenna. The antenna is designed for mounting on a standard communications tower or on a building rooftop, and requires minimal “real estate.” The Access Point connects to the local network device (switch/router) via a standard 10/100BaseT interface.The antenna is connected to the Access Point via 50-ohm low loss coaxial cable. Some ExcelMAX Access Points also contain GPS circuitry that connects to a separate supplied external antenna (supplied by Axxcelera). The antenna is designed for mounting on a standard communications tower or on a building rooftop, and requires minimal “real estate.” The ExcelMAX Management System is typically located at the customer Network Operating Center (NOC), and allows complete control of the Axxcelera ExcelMAX system singly or in a network environment
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.410 OF 652.2.1 ExcelMAX Access PointThe Access Point is composed of five main physical components: • Access Point – Outdoor Unit• Network Interface Adaptor/AC or DC Power Adaptor• Interconnecting Cable (supplied by the service provider)• AC or DC Power cord (supplied by the service provider, except for some models where the AC cords are included)• Mounting hardwareAdditionally, some ExcelMAX Access Point units contain GPS circuitry that connects to a separate external antenna (supplied by Axxcelera). Figure 2-1: ExcelMAX Access Point kit
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.411 OF 65.Figure 2-2: ExcelMAX Access Point viewsFigure 2-3: Access Point block diagramUV-rated, shielded Cat-5 cable[Ø.205-.190 in.]Ø5.2-4.8 mm(not supplied)RJ-45 to RJ-45Ethernet Cable(not supplied)To ComputerAccessPointAC or DC power connection - as appropriateAC or DC NIA
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.412 OF 652.2.1.1 OPTIONAL: GPS SynchronizationGlobal Positioning System (GPS) support is a factory-fit option for ExcelMAX Access Points. When supported, a GPS antenna may be connected to each co-located ExcelMAX Access Point to allow them to synchronize their RF transmissions. Although not required for basic system operation, use of the “network synchronization” feature synchronizes Access Points so that they transmit and receive at the same time to limit interference. This function of the GPS reduces adjacent channel interference, and also reduces interference between adjacent base-station sites (i.e., frequency re-use).2.3 Major Components2.3.1 Indoor EquipmentThe indoor equipment consists of the NIA/Power Adapter, which may be an AC or DC variant, according to the model ordered.2.3.1.1 AC NIA/Power AdapterThe AC NIA/Power Adapter (Figure 2-4:) is the customer's interface with the Access Point. The AC NIA/Power Adapter contains interfaces to the AC power supply, customer's data network, and the Access Point connecting cable. The AC NIA/Power Adapter has a power indicator LED that illuminates when power is applied to the AC NIA/Power Adapter. The AC NIA/Power Adapter is wall-mountable using the screw hangers on the back. An included tie wrap is used for strain relief of the interconnecting cable.Figure 2-4: AC NIA/Power Adapter
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.413 OF 652.3.1.2 DC NIA/Power AdapterThe DC NIA/Power Adapter (Figure 2-5:) is the customer's interface with the Access Point. The DC NIA/Power Adapter contains interfaces to the DC power supply, customer's data network, and the Access Point connecting cable. The DC NIA/Power Adapter has two LEDs:1) Power Input LED (furthest from the Access Point RJ45) – The Power Input LED lights green when the battery input (-ve supply and return) are wired correctly. It does not check the ground. The Power Input LED lights red if the battery input is reversed (i.e., the -ve supply and return are connected in reverse order).2) Current Draw LED – The Current Draw LED is either green or unlit. It lights green when the Access Point is drawing a significant current (approximately 0.2A or more).Figure 2-5: DC NIA/Power Adapter NoteThe early DC NIA/Power Adapter units are desk mountable, but future units will be wall-mountable with four fixing screws provided by the customer.N
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.414 OF 652.3.2 Interconnecting cableThe interconnecting cable is used to connect the Access Point to the NIA. The cable must be straight-through CAT-5, electrically shielded, and outdoor rated. The cable carries Ethernet data as well as DC power from the NIA to the Access Point. Customer equipment requiring Ethernet connectivity may be located up to 100 meters from the outdoor Access Point. The cable must have shielded field-installable connectors on both the Access Point and NIA ends. Wiring distances are illustrated in Figure 2-6:.The Access Point supports MDIX, therefore either a straight cable or a cross-over cable can be used to connect the NIA and any customer equipment.Figure 2-6: Wiring DistancesNIAComputer100 m max. Ethernet connectivityStraight-Through CAT-5 Straight-Through CAT-5 orCrossed-Over CAT-5AccessPoint
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.415 OF 65Figure 2-7: Interconnecting Cable Configurations2.3.3 Outdoor Equipment• ExcelMAX Access Point• Antenna Cables (customer furnished)• Sectorized or Omnidirectional Antenna• GPS antenna (optional)
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.416 OF 653.0 Installation3.1 Compliance Alert – Operation in the 3.4 - 3.6 GHz BandThe CE Marking with alert symbol (see below) appears on the Access Point assembly. The alert symbol indicates operation on frequency bands that are not harmonized throughout the European community.Figure 3-8: Compliance Alert LabelMember states must be notified, in accordance with Article 6.4 of the R&TTE Directive 99/5/EC, before this equipment can be sold or put into service. Contact Axxcelera Customer Support for an up-to-date listing of Member State Notifications. See “Technical Support” on page 8.3.2 Operation in the 3.650 - 3.675 GHz Band3.2.1 FCC Information to Users @ FCC 15.21 & 15.105For Class B Unintentional Radiators:This equipment has been tested and found to comply with the limits for a Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.3.2.2 Warning to Users @ FCC 15.21 & 15.105: NoteThis equipment operates in the 3.4 - 3.6 GHz frequency band, which is not harmonized throughout the community. WarningChanges or modifications not expressly approved by Axxcelera Broadband Wireless could void the user’s authority to operate the equipmentN
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.417 OF 653.2.3 FCC Label @ FCC 15.19For Class B - Unintentional Radiators:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.3.2.4 RF EXPOSURE REQUIRMENTS @ 1.1310 & 2.10913.3 Installation WarningsPlease pay attention to the following warnings:When servicing equipment and selecting a location for the ExcelMAX antennas, it is important to note that a minimum distance of 25 cm is required between personnel and ExcelMAX antennas to comply with a radio-frequency exposure limit of 1.0mW/cm2.Figure 3-9: RF Warning LabelArcing may occur when connecting the outdoor Ethernet cable to either the Access Point or the NIA should the power be connected to the NIA. Arcing may irrevocably damage the NIA or the Access Point. To prevent any chance of damage from occurring, verify that the power is disconnected from the NIA before attempting to connect the interconnecting cable to either the Access Point or NIA.3.4 Environmental Cautions• Ambient Temperature – The BTS equipment (indoor equipment) must be installed in a temperature-controlled environment. Ambient temperature should be within a temperature range of -5 C to +40 C. The TMAs and antennas are outdoor equipment that are designed to operate over a temperature range of -33 C to +55 C.• Reliable Grounding – Reliable grounding of the equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips). WarningTo satisfy FCC RF exposure requirements for transmitting devices, a separation distance of 25 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter°°°°
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.418 OF 653.5 Installing Outdoor Equipment3.5.1 Access Point Packing ListSee “ExcelMAX Access Point Packing List” on page 9.3.5.2 Sector Antenna Packing ListThe following is included in the shipment of each sector antenna:• 1 antenna• 1 upper bracket• 1 lower bracket• 2 swing arms• 2 clamps• 4 M8X100 Hex Head bolts• 6 M8X25 Hex Head bolts• 10 M8 Flat washers• 10 M8 Lock washers3.5.3 Omnidirectional Antenna Packing List• 1 Omni antenna• 1 Omni antenna pole bracket• 4 Worm drive clamps• 2 M3 X 10MM socket head screws• 2 M3 Lock washers• 2 M3 Flat washers3.5.4 Customer Supplied Equipment Required for Antenna InstallationThe following is not supplied with the Access Point but is required for installation:• Installation Collar Kit Axxcelera P/N 020-16300-0003, includes: • 1 collar clamp • 1 collar bracket with pin • 2 nuts• Box/open end wrench for M8• Torque wrench (rated to 34 Nm [25 ft.-lb.])• Ground Lug Ring Terminal Panduit LCB8-14-L or equivalent3.5.5 Antenna Site RequirementsBasic installation locations should have been established at the initial site survey phase, before equipment has been delivered.1) Verify that the elevation of the antennas can be sufficiently high to avoid obstructions and the antennas will have a clear line of sight to the desired coverage area.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.419 OF 652) Be sure to observe local building and electrical codes when running all cables.3) Verify that the antenna mounting is approved by both the owners of the structure and a qualified engineer.4) Verify that the tower mounting base can handle both the weight and the wind loading stress of the installed antennas and cables.5) Find suitable equipment locations with consideration for RF cable length restrictions.3.5.6 Required Tools for Outdoor InstallationBe sure you have the following equipment available for mounting the antennas and Access Point:Recommended Tool Kit (screw drivers, all-purpose knife, adjustable wrenches, SAE and Metric socket set and ratchet, hacksaw, wire cutters, wire strippers, coax cable strippers)• Crimp tool for #8 AWG Ground Lug Terminal, Panduit part number CT-17000 or equivalent• Electric drill and assorted drill bits• Extension cord• UV-rated coax seal, for example, 3M Scotch Seal Industrial Sealant 800• UV-rated rubberized tape, 3M Weatherban Sealant Tape PF-5422 or similar• Safety rope and climbing harness• UV-rated tie wraps• Antenna sighting equipment3.5.7 Preparing to Mount the Antenna BracketsDepending on the type of tower or other style of mounting in use at each site, 5cm (2 in.) diameter mounting poles will need to be positioned on the tower with the antennas pointed in the proper direction. WarningDo not leave tools lying around unattended on tower platforms and roofs. They may cause a tripping hazard leading to equipment damage, personal injury or death.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.420 OF 653.6 Installing an Optional Sector Antenna3.6.1 Grounding the Antenna Mounting1) Attach the ground lug using the Hex bolt, lock washer and flat washer that came with the Access Point.2) Ensure the cable has a good connection. Remove all paint and corrosion where the clamp is attached.3) Use dielectric grease on the clamp connection to prevent any electrolysis activity due to dissimilar metals.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.421 OF 653.6.2 Attaching the Sector Antenna to the Mounting Points1) Observing the correct polarity for the antenna in accordance with the initial RF Site Survey, lay out the antenna assembly for mounting. Confirm the required polarity against the polarity label on the back of each antenna assembly. 2) Attach the upper and lower brackets to the antenna. See details A and B.Figure 3-1: Attach upper and lower brackets WarningDo not work on antenna installations of any kind when there is any possibility of electrical storm activity in the area.AB6X M8 Boltsand Washers
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.422 OF 65Figure 3-2: Details A and B DETAIL A DETAIL B
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.423 OF 653) Attach the collar bracket to the pole.Figure 3-3: Attach the collar bracket to the pole.2X 3/8-16 Hex Nuts Torque to 24 Nm (17.7 ft-lb)Installation Collar Bracket (Included with Installation Collar Kit)Align Collar Clamp tothe Desired Antenna Azimuth Pointing DirectionCollar Clamp
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.424 OF 654) Mount the antenna to the pole. Rest the antenna on the Installation Collar Clamp and attach the clamps loosely. See Detail C.Figure 3-4: Mount the antenna to the pole.Antenna with Upper and Lower Brackets4X M8X100 2X ClampsAllowable Pole OutsideDiameter Range48mm to 114mm4X Lock Washer4X Flat Washer2X Swing Arm
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.425 OF 65Figure 3-5: Detail C - upper bracket rests on installation collar clamp and is held in place by the pin.CDETAIL CPin
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.426 OF 655) Align the antenna to the desired elevation angle and azimuth direction.Figure 3-6: Azimuth and elevation adjustmentElevation Adjustment Range0° to 10° Azimuth Adjustment
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.427 OF 656) Tighten down all the hardware. Torque all bolts to 27 Nm (20 ft.-lb.Figure 3-7: Tighten down all bolts10X Tighten Bolts
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.428 OF 657) Remove the installation collar kit.Figure 3-8: Remove installation collar kit
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.429 OF 658) Attach the cable. Torque the N-connector to 1.0 Nm (8.9 in-lb.).Figure 3-9: Attach the cable to the antenna3.6.3 Attaching RF Cable to Access Point1) Attach the RF cable to the Access Point.2) Torque the connector to 1.7 Nm (15 in.-lb.).3) Seal the connection.Access Point
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.430 OF 653.6.4 Grounding the CablesGround the RF cables in accordance with the manufacturer’s specification. Ground the cables at the top of the tower.Grounding methods may vary from site to site and with the manufacturer’s recommendations.One method of grounding is to strip the cover from the low-loss cable and clamp a ground strap to the exposed copper shield. The strap is then connected to the tower. The clamp is wound with waterproof tape.3.6.5 Waterproofing Cable ConnectionsWrap RF cable connections with waterproof tape.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.431 OF 653.7 Installing Optional Omnidirectional Antenna3.7.1 Grounding the Antenna Mounting1) Attach the ground lug using the Hex bolt, lock washer and flat washer that came with the Access Point.2) Ensure the cable has a good connection. Remove all paint and corrosion where the clamp is attached.3) Use dielectric grease on the clamp connection to prevent any electrolysis activity due to dissimilar metals.3.7.2 Installing the Omnidirectional Antenna1) Attach the worm clamps to the omni bracket.Figure 3-10: Attach worm clamps to Omni bracket WarningDo not work on antenna installations of any kind when there is any possibility of electrical storm activity in the area.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.432 OF 652) Attach the pole and tighten all worm clamps.Figure 3-11: Attach to the pole
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.433 OF 653) Attach the RF cable. Torque the connector to 1.7 Nm (15 in.-lb.). Figure 3-12: Attach cable to Access Point3.7.3 Attaching RF Cable to Access Point1) Attach the RF cable to the Access Point.2) Torque the connector to 1.7 Nm (15 in.-lb.).3) Seal the connection.3.7.4 Grounding the CablesGround the RF cables in accordance with the manufacturer’s specification. Ground the cables at the top of the tower.Grounding methods may vary from site to site and with the manufacturer’s recommendations.One method of grounding is to strip the cover from the low-loss cable and clamp a ground strap to the exposed copper shield.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.434 OF 65The strap is then connected to the tower. The clamp is wound with waterproof tape.3.7.5 Waterproofing Cable ConnectionsWrap RF cable connections with waterproof tape.3.8 Installing the Access Point3.8.1 Mounting L-bracket to the Access PointFigure 3-13: Mounting the L-bracket to the Access Point1) Attach the L-bracket to the Access Point using 4 hex bolts with 4 split lock washers.2) Torque the hex bolts to 8.81 ±67 Nm (78 ±6 in.-lb.) with a 10 mm open-end wrench.M6 X 16 mm Hex Bolt4 eaM6 Split Lock Washer4 ea
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.435 OF 653.8.2 Mounting Access Point to the PoleFigure 3-14: Mounting the Access Point to the PoleAttach the Access Point to the pole using the clamp, U-bolt, M6 split lock washer and M6 serrated flange nut. Hex nuts should be tightened enough to prevent the Access Point from falling.U-BoltM6 SerratedFlange Nut2 eaM6 SplitLock Washer2 eaAccess Point
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.436 OF 653.8.3 Aligning the Access PointFigure 3-15: Aligning the Access Point1) Rotate the Access Point to the desired azimuth pointing direction.2) Tilt the Access Point to adjust the elevation (L-bracket may need to be rotated 180° for further adjustment).3) Torque the U-bolt nuts to 8.8 ±7 Nm (78 ±6 in.-lb.).(OPTIONAL FIXEDELEVATION MOUNTING)Azimuth direction16° IncrementsFixed elevationholesADJUSTABLE ELEVATION MOUNTINGAzimuth directionElevationadjustmentslot20° Max.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.437 OF 653.8.4 Attaching the Ground Wire (recommended)Figure 3-16: Attaching the Ground Wire1) Crimp one end of ∅ 2.8 mm (8 AWG) wire to the ground lug.2) Attach the assembled ground lug to the transceiver housing using an M6 x 16 lg hex bolt, M6 split lock washer and M6 flat washer. Torque the hex bolt to 8.8 ± .7 Nm (78 ± 6 in.-lb.) using a 10 mm open-end wrench.3) Attach the remaining ground wire end to the "Earth Ground" and/or mounting pole per the local electrical code. WarningAxxcelera recommends grounding the unit and supplies the following instructions as a reference only. Necessary grounding should be completed per local electrical codes.M6 Hex BoltMounting PoleM6 Lock WasherM6 Flat Washer8 AWG )Ø2.8 mm( Ground Wire (not provided)To Earth GroundAccess PointGround Lug
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.438 OF 653.8.5 Attaching the Cat-5 CableFigure 3-17: Attaching the Cat-5 Cable1) Push the un-terminated, un-stripped (no plug) Cat-5 cable through the hole in the gland seal. Loosen the nut on top of the gland seal if the wire is not moving freely.2) Using a shielded RJ-45 plug, terminate (attach plug) to the Cat-5 cable per the manufacturer's recommended specifications for plug attachment. (Recommended manufacturer: AMP, P/N 5-569552 or equivalent)3) Remove and discard the cap plugging the hole in the transceiver. 4) Slide the O-ring over the Cat-5 cable and onto the PG-11 gland seal.5) Look into the open hole and orient the RJ-45 plug, pushing the plug into the socket until the connectors are locked together.6) Thread the gland seal into the transceiver and torque using the bottom nut of the gland seal (closest to the Access Point) to 3.8 Nm (33.2 in.-lb.) using the 7/8 open-end wrench.CapShielded RJ-45 Plug(not provided)Access PointUV-resistant, shielded, outdoor Cat-5 CableO-ringPG-11 GlandSealDETAIL ASCALE 1 : 2A(Ø5.2-4.8 mm [Ø.205-.190 in] to IDU (not provided)
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.439 OF 657) Torque the dome nut at the top of the gland seal to 2.5 Nm (22.1 in.-lb.) using the 7/8 open-end wrench.8) Secure the Cat-5 cable and ground wire to the mast using UV-resistant tie wraps.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.440 OF 653.9 Power and Data Connections – AC and DC Power OptionsThere are two types of PSU/NIA units:1) AC PSU/NIA2) DC PSU/NIAThe installation instructions for the AC and DC units are different. For instructions on installing the AC PSU/NIA, refer to 3.9.1. For instructions on installing the DC PSU/NIA, refer to 3.9.2.ExcelMAX Access Points are shipped with either the AC PSU/NIA or the DC PSU/NIA unit, depending on what the customer ordered.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.441 OF 653.9.1 AC PSU/NIA Option3.9.1.1 Connecting the Access Point to the AC Power Supply/NIAThe following procedures will guide you through the connection of the AC PSU/NIA unit:1) Remove the new AC PSU/NIA from the installation kit.2) Using a shielded RJ-45 plug, terminate (attach plug) to the Access Point Cat-5 cable per the manufacturer's recommended specifications for plug attachment. (Recommended manufacturer: AMP P/N 5-569552).3) Insert the RJ-45 plug from the outdoor Access Point into the RJ-45 receptacle, labeled Data+Power, on the NIA (Figure 3-18:).Figure 3-18: Connect the Access Point WarningIt is extremely important to connect the AC power to the AC PSU/NIA as the last step. Connecting AC power prematurely can damage the Access Point and lead to faulty behavior.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.442 OF 653.9.1.2 Completing the Connection of the AC Power Supply/NIA 1) Insert one end of an RJ-45 to RJ-45 Ethernet cable assembly to the RJ-45 receptacle, labeled Data, on the outside of the NIA and the other end to the customer's computer (Figure 3-19:).Figure 3-19: Connect customer computer or network device2) Check to see that the connection to the Access Point is in place. 3) Connect the three-prong female power cord to the NIA. The power cord uses an IEC-320-C13 type connector (Figure 3-20: and Figure 3-21:). WarningIt is extremely important to connect the AC power to the AC PSU/NIA as the last step. Connecting AC power prematurely can damage the Access Point and lead to faulty behavior. NoteOther than the models where the power supply cord is included, the AC PSU/NIA does not come with cables or power cord. Service provider must provide their own cables and power cord. NoteCustomer equipment requiring Ethernet connectivity may not be located more than 100 m (328 ft.) from the Access Point.NN
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.443 OF 654) Insert the power cord connector from the NIA into the nearest wall outlet.Figure 3-20: Connect the power cordFigure 3-21: NIA’s IEC320-C7 type connector WarningIt is extremely important to connect the AC power to the NIA as the last step. Connecting AC power prematurely can damage the Access Point and lead to faulty behavior.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.444 OF 655) The completed setup is shown in Figure 3-22:. After verifying all connections to the NIA, connect the power cord to the wall and complete the process of setting up of the Access Point.Figure 3-22: NIA setup is complete
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.445 OF 653.9.2 DC PSU/NIA OptionThe DC PSU/NIA unit powers the ExcelMax Access Point from a -48V DC power source, typically a battery back-up supply. The ExcelMax DC PSU/NIA units (020-44109-0802; see Appendix B:) are black, and output an isolated supply of +53.5V. The DC PSU/NIA has an input power connector at one end, and is supplied with the mating plug, which has 3 screw terminals on it for easy installation. The two supply wires and Earth/Ground are connected here. The Power Input LED is green when the power connection is wired correctly, but red if the polarity is reversed. It is off when there is no power.The DC PSU/NIA has two RJ45 connectors at the other end. One is for the LAN Ethernet connection. The other is a Power-Over-Ethernet type connection, supplying power and data to the ExcelMAX Access Point. The Current Sense LED is green when the Access Point is on and drawing minimum specified current (approximately 0.2A or more). WarningExcelMAX Access Points can only be powered by the ExcelMax version of the DC PSU/NIA. The Access Point will be permanently damaged if used with another version of the DC PSU/NIA. The DC PSU/NIA unit contains no serviceable parts. WarningThe DC PSU/NIA unit is designed for indoor use only. The body of the unit is used as a heat sink, and will get very warm.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.446 OF 653.9.2.1 Connecting the Access Point to the DC Power Supply/NIA The following procedures will guide you through the connection of the DC PSU/NIA unit:1) Remove the new DC PSU/NIA from the installation kit.2) Using a shielded RJ-45 plug, terminate (attach plug) to the Access Point Cat-5 cable per the manufacturer's recommended specifications for plug attachment. (Recommended manufacturer: AMP P/N 5-569552).3) Insert the RJ-45 plug from the outdoor Access Point into the RJ-45 receptacle, labeled Data+Power, on the DC PSU/NIA (Figure 3-23:).Figure 3-23: Connect the Access Point WarningIt is extremely important to connect the DC power to the DC PSU/NIA as the last step. Connecting DC power prematurely can damage the Access Point and lead to faulty behavior. The DC PSU/NIA unit contains no serviceable parts. NoteThe power should be tested - the power (outer) LED should light green. If the light is red or off then the connections are incorrect. The Earth connection is not checked by the LED. NoteThe DC PSU/NIA does not come with cables or power cord. Service provider must provide their own cables and power supply wires.NN
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.447 OF 653.9.2.2 Completing the Connection of the DC Power Supply/NIA 1) Insert one end of an RJ-45 to RJ-45 Ethernet cable assembly to the RJ-45 receptacle, labeled Data, on the outside of the DC PSU/NIA and the other end to the customer's computer (Figure 3-24:).Figure 3-24: Connect customer computer or network device2) Check to see that the connection to the Access Point is in place. WarningIt is extremely important to connect the DC power to the DC PSU/NIA as the last step. Connecting DC power prematurely can damage the Access Point and lead to faulty behavior. NoteThe DC PSU/NIA does not come with cables or power cord. Service provider must provide their own cables and power cord. NoteCustomer equipment requiring Ethernet connectivity may not be located more than 100 m (328 ft.) from the Access Point.NN
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.448 OF 653) Screw three wires (22-14AWG) from the power supply into the mating plug (-48V DC supply, DC return, and earth) (Figure 3-25:). Figure 3-25: Mating Power Plug 4) Connect the assembled mating plug into the DC PSU/NIA (Figure 3-26: and Figure 3-27:).Figure 3-26: NIA’s connector without mating plugExterior View Mating View Top ViewMating Power Plug Connector-48V DC Supply, DC Return, and Earth GroundClamping screws for DC Supply, DC Return , and Earth Ground wires
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.449 OF 65.Figure 3-27: Connect the mating plug5) The completed setup is shown in Figure 3-28:.Figure 3-28: NIA setup is complete WarningIt is extremely important to connect the DC power to the DC PSU/NIA as the last step. Connecting DC power prematurely can damage the Access Point and lead to faulty behavior.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.450 OF 654.0 Configuring an Access Point for Single-Channel UseUsing the Access Point setup screens, follow the procedure below to configure a single-channel Access Point. The following topics cover configuring an Access Point for single-channel use.• Logging into the Access Point Web Page• Configuring IP Address Settings• Configuring System Information Settings• Completing Access Point Setup NoteWhere dynamic frequency selection (DFS) is not required, the Access Point will only support a single-channel configuration.N
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.451 OF 654.1 Logging into the Access Point Web Page1) If the installer laptop is not running, power on and wait for the installer laptop to complete ini-tialization to the desktop.2) Set the IP address to be on the same network as the single-channel Access Point. 3) To run the Access Point setup operation, open an internet browser and type the following Access Point’s IP address in the browser Address field:Example: 10.1.1.2544) When the authentication popup appears (Figure 4-1:), type the following default values in the user name/password fields: User Name: adminPassword: adminFigure 4-1: Authentication popup NoteThe Access Point default IP address is 10.1.1.254, and the netmask is 255.255.255.0.N
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.452 OF 655) When the Access Point Status screen appears (Figure 4-2:), continue with the setup process by using the links from the screen menu, starting with configuring the IP Address settings. Figure 4-2: Single-Channel Access Point Status screen
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.453 OF 654.1.3 Configuring IP Address SettingsFollow this procedure to configure the IP Address settings.1) Select IP Address from the menu list.2) When the IP Address screen (Figure 4-3:) appears, in the Edit Settings fields enter the appropriate IP Address, Subnet Mask, and Gateway addresses.Figure 4-3: Configuring the IP Address3) Click Apply to accept the addresses. The Current Settings will display the address values.4) If the current addresses need to be changed, then enter new addresses in the Edit Settings fields and click Apply.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.454 OF 654.1.4 Configuring System Information SettingsFollow this procedure to configure the System Information settings.1) Select System from the menu list.2) When the System Information screen (Figure 4-4:) appears, enter the System Name, Location, and Contact information in the appropriate fields.Figure 4-4: Configuring System Information Settings3) Click Apply to accept the entries.4) If the current information needs to be changed, then enter the new information in the appropriate fields and click Apply. NoteAccess Points with the same Location name will be placed into the same cell on the Axxcelera NMS.N
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.455 OF 654.1.5 Completing Access Point SetupFollow this procedure to complete the setup of the Access Point.1) Select Setup from the menu list.2) When the Access Point Setup screen appears (Figure 4-5:), enter the desired parameters.Figure 4-5: Single-Channel Access Point Setup screen
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.456 OF 653) Select the desired CP Ratio (G) from the dropdown list (Figure 4-6:).Figure 4-6: CP Ratio (G) options4) Select the desired Frame Duration Code from the dropdown list (Figure 4-7:Figure 4-7: Frame Duration Code options5) Click Apply to complete the single-channel Access Point setup.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.457 OF 654.1.6 Power Settings for Operation in the 3.650 - 3.675 GHz BandAP Antenna Gain ..........16.5 dBi External, Sectored, 60deg1 dBi .......... Cable LossChannel Spacing: 7MHzFreq Gant BW TX set PPSD (cond)PPSD EIRPPPSD EIRP LimitMargin(MHz) (dBi) (MHz) (dBm) (dBm/MHz) (dBm/MHz) (dBm/MHz) dB3662.5 15.5 7 10 14.45 29.95 30 0.05Channel Spacing: 3.5MHzFreq Gant BW TX set PPSD (cond)PPSD EIRPPPSD EIRP LimitMargin(MHz) (dBi) (MHz) (dBm) (dBm/MHz) (dBm/MHz) (dBm/MHz) dB3662.5 15.5 3.5 8 14.49 29.99 30 0.01AP Antenna Gain 14 dBi External, Sectored, 90deg1 dBi Cable LossChannel Spacing: 7MHzFreq Gant BW TX set PPSD (cond)PPSD EIRPPPSD EIRP LimitMargin(MHz) (dBi) (MHz) (dBm) (dBm/MHz) (dBm/MHz) (dBm/MHz) dB3662.5 13 712 16.95 29.95 30 0.05Channel Spacing: 3.5MHzFreq Gant BW TX set PPSD (cond)PPSD EIRPPPSD EIRP LimitMargin(MHz) (dBi) (MHz) (dBm) (dBm/MHz) (dBm/MHz) (dBm/MHz) dB3662.5 13 3.5 10 16.97 29.97 30 0.03
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.458 OF 65AP Antenna Gain 10 dBi External, Omni1 dBi Cable LossChannel Spacing: 7MHzFreq Gant BW TX set PPSD (cond)PPSD EIRPPPSD EIRP LimitMargin(MHz) (dBi) (MHz) (dBm) (dBm/MHz) (dBm/MHz) (dBm/MHz) dB3662.5 9 7 16 20.95 29.95 30 0.05Channel Spacing: 3.5MHzFreq Gant BW TX set PPSD (cond)PPSD EIRPPPSD EIRP LimitMargin(MHz) (dBi) (MHz) (dBm) (dBm/MHz) (dBm/MHz) (dBm/MHz) dB3662.5 93.5 14 20.97 29.97 30 0.03
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.459 OF 655.0 Maintenance GuideThis section is intended for use by all Field Service Engineers.Catastrophic failures can often be prevented by a regimen of preventative maintenance. The following is a list of maintenance suggestions supported by Axxcelera.1) Perform regular visual inspections. Check the butyl-rubber waterproofing tape used to cover the cable connectors for integrity.2) Check areas around ground clamps for any signs of oxidation or corrosion that might compromise the connection.3) Periodically check the connectors for tightness. 4) Take care not to compromise the integrity of the cabling. IF, RF and Ethernet cabling can become damaged if it becomes pinched, for example during site construction or renovation.5) Periodically check the integrity of the signal path clearance between the Access Point and the CPE. It may seem obvious, but when service is disrupted, and there is no obvious suspect hardware, it is possible that something in the environment has changed and the RF path itself is suspect. The path that was unobstructed yesterday might not be so clear today.6) Check for near-field objects. No metallic objects, such as telephone or power wires, poles or fences, should be within the field view of the antenna (+/- 8 degrees) within the first 20 feet. These objects could reflect the microwave energy back to the antenna and distort the RF beam. This reflection could also cause the signal to be directed away from where it is needed.7) Non-metallic objects in the vicinity can absorb microwave energy; however, when they become wet, these objects can become very reflective. Shots over water or flat surfaces should be avoided because these surfaces cause reflections that increase multipath. Multipath is when the same signal is received twice; one signal is the direct path and the other is the reflected (delayed) signal. The delayed signal can be out of phase with the direct signal and cause cancellation.8) Periodically check for ground loops that might be introduced into the system inadvertently by engineers adding new equipment without regard to the grounding system already in place. Ground loops can cause noise problems in the system.
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.460 OF 65Appendix A: NIA/Power Adapter Specifications: Model # TR60A-POE-LFeatures Specifications• Universal Input: 90 ~ 264Vac • Continuous Short Circuit Protection• Conductive EMI Meets CISPR/FCC Class B• High Efficiency at 75% Minimum• Lighting Protection NOTE 1: Voltage accuracy is set at 60% full load. 2: Add a 0.1uF ceramic capacitor and a 10uf E.L. capacitor to output for Ripple & Noise measuring @20MHz BW. 3: Line regulation is measured from 100Vac to 240Vac with full load. 4: Load regulation is measured from 60% to 100% full load and from 60% to 20% full load(60% +/- 40% full load). • Input Characteristics Voltage Frequency Inrush Current Conducted EMI Isolation Leakage Current 90 ~ 264Vac 47 to 63Hz 50A Max. @ 264Vac CISPR/FCC Class B Input to output = 4,242Vdc 1.5mA max. • Output Characteristics Hold-up Time Short Circuit Protection Over Voltage Protection 8mS typ. @ 115Vac Auto-Recovery Auto-Recovery • Environmental Characteristics Operating Temperature Storage Temperature Operating Humidity Cooling 0 ~ 40 C -50 ~70 C 5% ~ 95% Free air cooling • Mechanical Outline Dimensions 150mm x 70mm x 35mm Typical at 25 C, nominal line and 75% load, unless otherwise Specified. Model Output Voltage Max. Load Min. Load Ripple & Noise Voltage Accuracy Line Regulation Load RegulationTR60A-POE-L 48 V 1.2 A 0 A 1% +/- 2% +/- 1% +/- 2%Figure A-1: NIA/Power Adapter Schematic Drawing Figure A-2: NIA/Power Adapter label°°°2/!UY),*3/!UY).*4/!SY),*5/!ED,6/!ED,7/!SY).*8/!HOE9/!HOE6/!OD8/!OD9/!OD7/!SY).*3/!UY).*4/!SY),*5/!OD2/!UY),*Ebub!jo Qpxfs,Ebub!pvu92 92
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.461 OF 65Appendix B: ExcelMax DC PSU/NIA (020-44109-0802)Features SpecificationsDimensions Desk-Mounting Unit:L= 126mmW= 81mmH= 46mmWall-Mounting Unit:L= 153mmW= 81mmH= 51mmWeight 350gColor BlackOperating Temperature 0 C to +40 C ambient (free air cooling)For Indoor Use OnlyStorage Temperature -40 C to +70 CInput DC, -48V (+/-20%)Output DC, +53.5V (typical)Max output current = 0.8AMax Power = 42WEfficiency 85% typicalProtection Continuous short-circuit protection on outputInternal fuse on negative supply inputThermal shutdown at 100CRoHS compliance Yes°°°°
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.462 OF 65Appendix C: Glossary of Terms and AbbreviationsBandwidth A measure (in Hertz) of a transmission facility’s ability to transmit signals that span a range of frequencies without degrading the amount of power in the signal. For example, a bandwidth of 2700 Hz.Base Station The indoor and outdoor equipment located at the central site.Bit Error Rate (BER) The percentage of received bits in error compared to the total number of bits received. Usually expressed as a number to the power of 10. For example, 10 means that one in every 100,000 bits transmitted will be wrong.Broadband A high number of signals multiplexed onto a single transmission channel.BTS Base Station Termination SystemCPE This unit contains both the antenna and the modem.Default Gateway A unique IP address that a device uses to put traffic on the network when it knows the address of a device it is trying to contact, but does not know exactly where on the network or on which sub-network it is located.Downstream Traffic traveling from the Access Point to the CPEFault A hard failure or performance degradation serious enough to destroy the ability of a network element to function effectively.FEC Forward-Error correctionFirmware Software “burned” into a chip.Frequency The rate at which an electromagnetic waveform, such as an electrical current, alternates. Measured in Hertz, i.e., cycles per second.Gain The increase in signaling power that occurs as a signal is boosted by an electronic device. Measured in decibels (dB).IP Internet Protocol. Set of standardized rules for the transmission of data over the internet.IP Address A unique numerical identifier of an intelligent network device. Because IP addresses are often in short supply, sometimes a DHCP server dynamically applies the address.Modulation The process of varying some characteristic of the electrical carrier wave as the information on that carrier wave varies.NIA Network Interfacing Adaptor. This unit supplies power and data to the CPE or Access Point.ODU Outdoor UnitPolarization Characteristic of electromagnetic radiation, such as radio waves, where the electric-field vector of the wave energy is perpendicular to the main direction, or vector, of the electromagnetic beam.5
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.463 OF 65Polling Interval The frequency with which a management station invites network nodes to transmit management information from several seconds to several hours. Transmits packets that can themselves add to network congestion, especially if the poll is too frequent on a big network.PSU Power Supply UnitQPSK Quadrature Phase Shift Keying. Two phase carriers are at 90 to each other and are thus electrically isolated.RF Radio Frequency: Signals that appear in the air link from antenna to antenna.RSSI Radio Signal Strength Indicator. Either visual or audio indicator used in antenna pointing.Rx Symbol meaning “Receive.”Signal-To-Noise Ratio (SNR) A measure of how much stronger a signal is than the background noise; usually expressed in decibels (dB)SNMP The Simple Network Management Protocol, developed to manage TCP/IP and Ethernet networksSpectrum A continuous range of frequencies, usually wide in extent, within which waves have some specific common characteristicsSymbol Rate In digital transmission, a recognizable electrical state which is associated with a signal element, which is an electrical signal within a defined period of time. In binary transmission, for example, a signal element is represented as one of two possible states or symbols, i.e., 1 or 0.Threshold A level, point, or value above which something is true or will take place and below which, it is not true or will not take place.Throughput The amount of data passed through a network measured in units of time, or as a percentage of the time available.Transceiver Device used to transmit and receive RF traffic.Tx Symbol meaning “Transmit.”Upstream Network traffic passing from CPE to the Access Point.°
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.464 OF 65IndexAAboutAC NIA/Power Adapter 12DC NIA/Power Adapter 13interconnecting cable 14AC power 43AC Power Adaptor 10Access Point Packing List 9, 18Access Point Setup screen 55Access Point Status screen 52Aligning the Access Point 36Arcing 17Attaching RF Cable to Access Point 29, 33BBandwidth, definition 62Base Station, definition 62BER, definition 62Bit Error Rate, definition 62Broadband, definition 62BTS, definition 62CCompleting Access Point Setup 55Compliance Alert 16Compliance Alert Labell 16Configuring IP Address Settings 53Configuring System Information Settings 54Connecting the AP to the DC Power Supply/NIA 46Conventions used 7CP Ratio (G) 56CPE – Outdoor Unit 10CPE, definition 62Current Draw LED 13Current Settings 53customer's data network 12, 13DDefault Gateway, definition 62Downstream, definition 62EEdit Settings 53Environmental Cautions 17ExcelMax DC PSU/NIA 61FFault, definition 62FEC, definition 62Firmware, definition 62Frame Duration Code 56Frequency, definition 62GGain, definition 62gland seal 38Glossary of Terms and Abbreviations 62grounding 37Grounding the Cables 30, 33IIndoor Equipment 12Installation ProcedureAlign the Access Point 36Attach the Cat-5 Cable 38Attach the Ground Wire 37Completing AC Power Connection 42Completing DC Power Connection 47Hook up the NIA 41Mount Access Point to the Pole 35Mount L-bracket to the Transceiver 34Installation Warnings 17Installing Outdoor Equipment 18Antenna Site Requirements 18Attaching the Antennas 21Grounding the Antenna Mounting 20, 31Omnidirectional Antenna Packing List 18Preparing to Mount the Antenna Brackets 19Required Customer Supplied Equipment 18Required Tools for Outdoor Installation 19Sector Antenna Packing List 18Installing the Access Point 34Installing the Omnidirectional Antenna 31Interconnecting Cable 10Interconnecting Cable Configurations 15IP Address 53IP Address, definition 62IP, definition 62MMaintenance Guide 59Major Components 12Modulation, definition 62Mounting hardware 10Mounting the Access Point to the Pole 35Mounting the L-bracket to the Access Point 34NNetwork Interface Adaptor 10NIA, definition 62OODU, definition 62O-ring 38Outdoor Equipment 15Overview, ExcelMAX Access Point 9PPolarization, definition 62Polling Interval, definition 63Power and Data Connections - AC and DC options40Power cord 10power indicator LED 12Power Input LED 13
EXCELMAX ACCESS POINT CELL INSTALLATION AND MAINTENANCE GUIDE VERSION 1.465 OF 65Preface 7PSU 63QQPSK, definition 63RRelated documentation 7RF Warning Label 17RF, definition 63RSSI, definition 63RX, definition 63SSales 8Signal-To-Noise Ratio, definition 63SNMP, definition 63SNR, definition 63Spectrum, definition 63Symbol Rate, definition 63System Information 54TTechnical support 8Threshold, definition 63Throughput, definition 63Transceiver, definition 63TX, definition 63UUpstream, definition 63Using this guide 7WWaterproofing Cable Connections 30, 34Who should read this guide 7Wiring Distances 14

Navigation menu