Authinx XC18A 2.4GHz WIRELESS COLOR CAMERA User Manual 1

Authinx Inc. 2.4GHz WIRELESS COLOR CAMERA 1

Contents

USERS MANUAL

1. Refer to the setup and operating instructions that camewith the 2.4 GHz Video Receiver, Model VR31A orVR36A (sold separately) to set up the Receiver.2. Mount the camera in a suitable location with the antennaon top so the camera is the right way up. If you install itoutdoors, run the small cable adapter through a hole inthe wall so you can plug the power supply into an ACoutlet indoors.3. Plug the power supply’s jack into the adapter cable onthe camera.4. Set the Housecode and Unit Code. (See instructionsincluded with X10 remote controls).5. Plug the power supply into any 120V AC outlet.6. Set the channel switch on the camera to the same settingas the one on the VR31A or VR36A Video Receiver.7. Adjust the antenna on the camera if necessary to aim itin the direction of the VR31A/VR36A Receiver thatyou have connected to your TV.LIMITED 1-YEAR WARRANTYX10.com, a division of X10 Wireless Technology, Inc. (X10)warrants X10 products to be free from defective material andworkmanship for a period of one (1) year from the original date ofpurchase at retail. X10 agrees to repair or replace, at it’s solediscretion, a defective X10 product if returned to X10 within thewarranty period and with proof of purchase.If service is required under this warranty:Call 1-800-675-3044 or visit www.x10.com, or e-mailsales@x10.com to obtain a Return Merchandise Authorization(RMA) number. Please do not return any products without anRMA number.Please visit www.x10.com/warrantyto complete your on-line warranty registration. Thank you.X10.com, a Div. of X10 Wireless Technology, Inc.For additional help, visit www.x10.com/support●Extremely small size.●Built-in 2.4 GHz Video Sender.●Can be turned on and off remotely (remote controlled power supply included).●Use it outdoors to monitor your front door, back yard, etc.●Use it indoors to monitor a child’s bedroom, etc.Model XX16AXX16A-11/06The XX16A includes the XC18A camera and XM13A remote controlled power supply. The XC18A is a very small andcompact color video camera with built-in 2.4 GHz transmitter. You can attach it to a wall anywhere you want to monitor. TheXC18A transmits video and sound to the VR31A, or video only to the VR36A receiver which is connected to your TV locatedanywhere in your home (up to 100 ft. away). The XM13A power supply lets you turn the camera on and off remotely, fromX10 remote controls (sold separately).XCam2 InstantON Color Camera™F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWOCONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCERECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: NO CHANGES OR MODIFICATIONS MAY BEMADE TO THE UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.Point the raised dimpleon the antenna towardsthe Receiver’s location.Plug powersupply inhere.XC18A25Plug intoany ACoutletAttachto a wall.3Cable adapter.7OutdoorsIndoorsSet the code used toturn on and off fromX10 remote controls.4XM13A6Set channel switch(under rubber plug)to match setting onVR31A or VR36AReceiver. (A is atbottom, D is at top).It is factory set to A.Remove clear cap and turnlens counterclockwise tofocus (replace cap foroutdoor use).Point backwards fromdirection shown here ifyou install the cameraoutdoors.

Navigation menu