Authinx UR28A User Manual UR28Ainst pm6

Authinx Inc. UR28Ainst pm6

manual

Set Up and Operating Instructions for Remote Control Model UR28AHome Control - When this button is pressed, the remote control is set to RF mode. The remote can then be used tocontrol X-10 RF home control modules.To Setup for Home Control:Plug in an X-10 Transceiver (sold separately) and set it to Housecode A. You can control it and other X-10 modules (setto Housecode A) as follows:1. Press and release the Home Control button.2. Use the number buttons to enter the Unit Code number of the chosen module. (You do not need to enter ‘0’ first for asingle digit number.)3. Press the appropriate button for the function you require (see below).X-10 Functions:On: CHANNEL +Off: CHANNEL –Bright: VOLUME +Dim: VOLUME –All Lights On: POWERAll Modules Off: MUTENote: You cannot dim or brighten an Appliance Module. If the module was off and you press its number followed byBright or Dim (VOLUME+ or VOLUME-) this will simply turn the module on. All Lights On only works with LampModules. (Appliance Modules do not respond to this command).Changing the X-10 House Code:The UR28A Remote defaults to Housecode A, and in most cases you will not need to change this unless you areexperiencing interference from a neighboring X-10 system.1. Press and release the X-10 button.2. Press and hold SETUP until the LED indicator lights steadily. Release the Setup button.3. Use the number buttons to enter the number equivalent to the chosen Housecode (1=A, 2=B ..16=P).4. Press the ENTER button to confirm the Housecode. The LED turns off.Note: The Housecode you choose must match the Housecode on the Transceiver and X-10 Modules you are using itwith.F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TOTHE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAYCAUSE UNDESIRED OPERATION.This equipment generates and uses radio frequency energy, and if not installed and used properly, that is, in strict accordancewith the manufacturers instructions, may cause interference to radio and television reception. It has been type tested andfound to comply with the limits for remote control security devices in accordance with the specifications in Sub-Part B ofPart 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residentialinstallation. However, there is no guarantee that interference will not occur in a particular installation. If this equipmentdoes cause interference to radio or television reception, which can be determined by unplugging the equipment, try tocorrect the interference by one or more of the following measures.o Reorient the antenna of the radio/TV experiencing the interference.o Relocate the product with respect to the radio/TV.o Move the product away from the radio/TV.o Plug the product into an outlet on a different electrical circuit from the radio/TV experiencing the interference.If necessary, consult your local dealer for additional suggestions.NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TO THEUNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.X-10 (USA) Inc., 91 Ruckman Rd., Closter, NJ 07624. ww.x10.comUR28A-2/26/99

Navigation menu