Authinx CR15A Remote Control User Manual Exhibit D Users Manual per 2 1033 b3

Authinx Inc. Remote Control Exhibit D Users Manual per 2 1033 b3

Exhibit D Users Manual per 2 1033 b3

SetupAll offAllLts onBrtDi mOnOffCenter1234567890CAMERAC2C3C1C4TVPOWERCHCHVOLVOLMZoomPro Remote ModelCR15ACR15A-04/02The CR15A Remote lets you move the position of an XC21A Pan/Tilt/Zoom camera from left to right (Pan) and up anddown (Tilt) as well as Zoom in on the picture. You can store 4 positions for a camera and then use the remote to sweepbetween these positions. Install 4 AAA alkaline batteries (sold separately) in the remote’s battery compartment.™For use with Pan/Tilt/Zoom CameraOperationPress a left or right “arrow” button at the top of theCR15A Remote to “Pan” the camera left or right. Pressan up or down “arrow” button to “Tilt” the camera upor down. Press Zoom in and out. The camera auto-focuses but you can fine-tune the focus with themanual focus Up/Down buttons.Storing positions:Buttons 1 thru 9 are used to store 9 position settingsfor the camera.1. Press C1 (default setting for the camera with powersupply set to A1).2. Press and hold Setup until C1 camera button lightsgreen.3. Move the camera to desired position using the Panand Tilt arrow buttons, and zoom in or out todesired zoom then press button number 1 to storethe first position and zoom setting.4. Move the camera to the next position and zoom,then press ‘2’ to store 2nd position (repeat forbuttons 3 thru 9 for up to 9 positions).5. Press Setup again to store and exit. (If setup is notpressed again the remote stores the positions andexits setup automatically after 1 minute).To move the camera to a stored position press 0through 9 to move to any of the 9 stored positions.Press Sweep (0) to sweep through all 9 positionsstored for the camera.To stop sweeping or movement to a stored position:Press any “arrow” button on the remote while thecamera is moving to stop the movement.Press Center to center the position for the camera.To clear ALL stored positions for a selected camera(C1):Press C1. Press and hold Setup until the greenindicator stays on. Press the 0 button twice. Presssetup again. Repeat for C2, C3, and C4.X10.com, a Div. of X10 Wireless Technology, Inc.For additional help, visit www.x10.com/support“Pans” left and right.“Tilts” up and down.Pressing any of theseturns on that camera,and turns the other 3off (Transceiverrequired). Not used ifyou only have onecamera.Stores Pan/Tiltpositions and Zoomsettings for eachcamera (up to 9settings).The camera auto-focuses but you canfine-tune the focusmanually, i.e., focus onobjects in the back-ground or foreground.Focus Up focuses onfaraway objects. FocusDown focuses on nearobjects.Zooms in.Zooms out.Used to store camerapositions and for othersetup functions.Centers the camera.Sweeps through thestored positions forthe selected camera.Used to control thediaphragm of thecamera. Iris Up givesa brighter screen. IrisDown gives a dimmerscreen.F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THEFCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWOCONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFULINTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANYINTERFERENCE RECEIVED, INCLUDING INTERFERENCE THATMAY CAUSE UNDESIRED OPERATION.NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THEUNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THEUSER'S AUTHORITY TO OPERATE THE EQUIPMENT.LIMITED 1-YEAR WARRANTYPlease visit www.x10.com/warrantyto complete your on-line warranty registration. Thank you.For help or more information on setup, please visit:www.x10.com/supportTurns on your TV.

Navigation menu