Autec s r l LKNDA1DM Transceiver unit User Manual 2

Autec s.r.l. Transceiver unit 2

User Manual 2

Original instructionsAIR SERIESPart B:Conformity and frequencies(434 and 915MHz)INDEX1 Conformity ............................................................................................................. 21.1 Conformity of frequency band 433.050-434.790MHz ........................................ 21.2 Conformity of frequency band 915-928MHz: FCC and IC ................................. 22 Frequencies ........................................................................................................... 32.1 Frequency band 433.050-434.790MHz ............................................................ 42.2 Frequency band 915-928MHz .......................................................................... 4AUTEC LIAIRE12-01
2LIAIRE12-01ConformityAUTEC - Air series1 Conformity1.1 Conformity of frequency band 433.050-434.790MHzEach AIR series' radio remote control working in the frequency band 433.050-434.790MHz complies with the (R&TTE) Directive 1999/5/EC and its essential requirements.Each radio remote control is also in conformity with the harmonised standards provided in the EC Declaration of Conformity.You can nd the EC Declaration of Conformity on the website www.autecsafety.com, in the product page of the relevant transmitting unit.1.2 Conformity of frequency band 915-928MHz: FCC and ICAn AIR series' radio remote control working in the frequency band 915-928MHz complies with the essential requirements of the following regulations: -FCC (Federal Communication Commission) Part 15 -IC (Industry Canada) RSS-102Unit FCC ID IC NumberA8 transmitting unit OQA-A08LA0AM 9061A-A08LA0AMAJM transmitting unit OQA-AJMDA0BM 9061A-AJMDA0BMAJR transmitting unit OQA-AJRDA0BM 9061A-AJRDA0BMAJS transmitting unit OQA-AJSDA0BM 9061A-AJSDA0BMTransmitting unitLK6/LK8 OQA-LKNLA1CM 9061A-LKNLA1CMTransmitting unitLK6 DF OQA-LKNDA1DM 9061A-LKNDA1DMReceiving unit GACRS13-G OQA-RGAGA00M d9061A-RGAGA00M a b cReceiving unit GDCRS13 OQA-RGEBA00M d9061A-RGEBA00M a b cReceiving unit LACRS13-L OQA-RLBHA00M d9061A-RLBCA00M a b cReceiving unit MACRM15 OQA-RMCEA00M d9061A-RMCEA00M a b cReceiving unitHACRP8 OQA-RPDFA00M d9061A-RPDFA00M a b cReceiving unitMVRCAN OQA-RNFLA00M d9061A-RNFLA00M a b cReceiving unitMVRL9E OQA-RRLPA00M d9061A-RRLPA00M a b c
AUTEC - Air seriesFrequencies 3LIAIRE12-01Receiving unitDCRM24 OQA-RMGMA00M d9061A-RMGMA00M a b cReceiving unitACRM5E OQA-RMHN00M d9061A-RMHNA00M a b ca. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.b. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Antenna type Antenna gain Antenna impedanceAutec stylus λ/4 <0dBi 50 Ohmc. Autec allows you to use only the dedicated antenna supplied either with the remote control or as original spare part. The use of any other type of antenna is prohibited and will invalidate the guarantee.d. Place the antenna of the receiving unit in a position that ensures a minimum separation distance of 20cm with all the people that can be in the working area.1.2.1 Federal Communications Commission (FCC)This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.1.2.2 Industry Canada (IC)This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.2 FrequenciesAIR series radio remote controls can work at two dierent frequency bands: 433.050-434.790MHz or 915.000-928.000MHz.
4LIAIRE12-01FrequenciesAUTEC - Air seriesThe radio remote controls' working frequency is dened by market-specic laws and standards. In order for the system “machine+radio remote control” to be compliant and therefore to be used, it shall comply with such laws and standards: if it does not, the system may be impounded by competent bodies.Autec cannot be held responsible if the radio remote control is set with forbidden frequencies.They automatically search for a free working frequency.2.1 Frequency band 433.050-434.790MHz2.1.1 FrequenciesThe radio link between the units of Autec AIR series radio remote controls is established at one of the frequencies permitted by the European standards in force when the system is put on the market.Frequencies used in the band 433.050-434.790MHz ..................................................... 64RF power ................................................................................................................ <1mWChannel spacing ...................................................................................................... 25kHz2.1.2 MarketAir series' radio remote controls working in the frequency band 433.050-434.790 MHz can be used within the EU (European Union), the EFTA (European Free Trade Association), in Australia and in Singapore.2.2 Frequency band 915-928MHz2.2.1 FrequenciesThe radio link between the units of Autec Air series radio remote controls is established at one of the frequencies permitted by the US, Canadian and Australian standards in force when the system is put on the market.Frequencies used in the band 915-928MHz ................................................................ 255RF power (FCC and IC) ................................................... meets FCC and IC requirementsChannel spacing ...................................................................................................... 50kHz2.2.2 MarketAir series' radio remote controls working in the frequency band 915-928MHz can be used in the US, Canadian and Australian markets.Check on the technical data plate of the units in which markets the radio remote control can be used.

Navigation menu