Autec s r l FJMNZ422 Transceiver unit User Manual 5

Autec s.r.l. Transceiver unit 5

User Manual 5

Original instructionsDynamic SerieSPart C: FJMﾠtransmittingﾠunitinDex1 Description ............................................................................................................ 22 Technical data ....................................................................................................... 33 Technical data sheet ............................................................................................. 34 Plates ..................................................................................................................... 45 Light signals .......................................................................................................... 56 Actuators for the display ...................................................................................... 76.1 DISPLAY pushbutton ....................................................................................... 76.2 Six pushbuttons ............................................................................................... 87 Malfunction signalled by the transmitting unit ................................................... 9AUTEC LIFJME00-06
2LIFJME00-06DescriptionAUTEC - Dynamic Series1 DescriptionPOWER SUPPLY.....................................................7.2VRADIO MODULE..............................................FSARTBEU2FREQUENCY RANGE......................................863-870MHzRF OUTPUT POWER.....................................PROTECTION DEGREE...............................................IP65<25mW ERPTA1194-00 A0TARG01P09 37TU ID: XXXXXXMANIF.DATE XXXXJa BS/N:XXXXXXcDcccLm n e F cKHGaDisplay or LED (if present)BLEDcActuators (joysticks, selectors, pushbuttons)DSTOP pushbuttoneTransmitting unit identication plateFTechnical data plateGRadio remote control identication plate (if the “ID internal tx memory” is present)HConnector for wire control (if present)JBatteryKRadio remote control identication plate (if the “Key ID 0-1” is present)LPower keyswitchmSTART pushbuttonnBattery housing
AUTEC - Dynamic SeriesTechnical data 3LIFJME00-062 Technical dataPower supply (battery MBM06MH) ......................................................................... 7.2VPower supply (battery LPM02) ............................................................................... 7.4VPower supply (battery LPM04) ............................................................................... 7.4VAntenna .................................................................................................................. internalHousing material .......................................................................................... PA 6 (20%fg)Protection degree ....................................................................................... IP65 (NEMA 4)Dimensions .................................................................. 310x210x190mm (12.2x8.3x7.5In)Weight ........................................................................................................... 2.5kg (5.5Lb)Run time at 20°C (68°F):- with battery MBM06MH ............................................................................................... 11h- with battery MBM06MH and monochromatic display 2.7" .............................................. 9h- with battery LPM02 .................................................................................................. 18.5h- with battery LPM02 and monochromatic display 2.7" ................................................... 15h- with battery LPM04 ..................................................................................................... 35h- with battery LPM04 and monochromatic display 2.7" ................................................... 28h- with battery LPM04 and color display 4.3" ..................................................................... 8h3 Technical data sheetThe technical data sheet contains the transmitting unit conguration and shows the matching between commands sent and machine functions/movements. It also contains the wiring diagram showing the connection between the receiving unit and the machine.Each technical data sheet must be lled in, checked and signed by the installer, who is responsible for a correct wiring.A technical data sheet must always be kept toghether with this manual (always keep a copy of the technical data sheet when it is used for administrative purposes).The wiring of the receiving unit outputs must always reect the wiring indicated in the technical data sheet.
4LIFJME00-06PlatesAUTEC - Dynamic Series4 PlatesThe transmitting unit has the following plates:Plate Position Contentradio remote control identication plateKey ID 0-1 (if present).Radio remote control serial number (S/N).Battery housing (if the “ID internal tx memory” is present).transmitting unit identication plate Battery housing.Manufacturing year, bar code and transmitting unit identication number (TU ID).technical data plate Battery housing.MODEL, TYPE and main transmitting unit technical data, marking and possible radio remote control marks.
AUTEC - Dynamic SeriesLight signals 5LIFJME00-065 Light signalsThe FJM transmitting units may have two or four LEDs.aRed LEDBGreen LEDcLEDs for Data Feedback functionIn both cases, a green LED [B] and a red LED [A] are always available, and they provide information regarding the radio remote control.If the unit has 4 LEDs, the side LEDs [C] are red and provide information coming from the machine (Data Feedback function).Symbol MeaningThis symbol indicates the red LED [A].This symbol indicates the green LED [B].The green LED [B] … Meaning…is o. The transmitting unit is switched o.… blinks fast The transmitting unit is switched on and there is no radio link.… blinks slowly The radio remote control is started and the radio link is present.
6LIFJME00-06Light signalsAUTEC - Dynamic SeriesThe red LED [A]a … Meaning…is o. The transmitting unit works correctly.… blinks The battery is nearly at.... illuminates for 2 secondsbThe transmitting unit does not work correctly.... blinks oncebAt power on, the transmitting unit detects that the STOP pushbutton is activated or damaged.... blinks twicebAt power on, the transmitting unit detects that one of the commands D2-D20 or SAFETY is activated or damaged (see technical data sheet).... blinks three timesbAt power on, the transmitting unit detects that the battery is at.... blinks four timesbAt power on, the transmitting unit detects that one of the commands A1-A8, L1-L8 and H1-H8 is activated or damaged (see technical data sheet).a. An acoustic signal is also heard when the red LED [A] is illuminated.b. After this signal, the transmitting unit switches o.
AUTEC - Dynamic SeriesActuators for the display 7LIFJME00-066 Actuators for the displayIf the transmitting unit has a display, it can be used through a pushbutton (see paragraph 6.1 ) or six pushbuttons (see paragraph 6.2).Functions carried out by these actuators are decided by the machine manufacturer: the user must be properly trained about them.6.1 DISPLAY pushbuttonThis pushbutton is used to: -activate the display lighting, if it is o -cyclically scroll the information on the display in two dierent modes: -manual: the lines scroll up each time the pushbutton is pressed -automatic: when the DISPLAY pushbutton is pressed for 3 seconds, the lines scroll automatically. If the DISPLAY pushbutton is pressed again, it switches back to manual mode.It is not possible to scroll the lines if icons only are displayed.The display lighting stays on for a time set by the machine manufacturer.Symbol MeaningThis symbol identies the DISPLAY pushbutton.The DISPLAY pushbutton may perform dierent functions from that described above according to what dened by the machine manufacturer.
8LIFJME00-06Actuators for the displayAUTEC - Dynamic Series6.2 Six pushbuttonsFunctions carried out by the six pushbuttons in order to manage the display, are congurable and are dened by the machine manufacturer.CABDaRed LEDBGreen LEDcLEDs for Data Feedback functionDPushbuttons to manage the 4.3" display
AUTEC - Dynamic SeriesMalfunction signalled by the transmitting unit 9LIFJME00-067 Malfunction signalled by the transmitting unitUse the light signals on the transmitting unit to identify the radio remote control malfunction.If the problem persists after the suggested solution has been carried out, contact the support service of the machine manufacturer.Signals Possible reason SolutionsThe green LED does not switch on when the START pushbutton is pressed, even though both the battery and the power keyswitch are inserted.The battery is at. Replace the battery with a charged one.The green LED blinks fast. No radio link. Bring the transmitting unit closer to the receiving unit.The red LED switches on for 2 seconds and then the unit switches o.The transmitting unit does not work correctly.Perform the procedure to save the addressc.Contact the support service of the machine manufacturer.The red LED blinks once during start up.The STOP pushbutton is locked or damaged.Unlock the STOP pushbutton.If this signal persists, contact the support service of the machine manufacturer.The red LED blinks twice during start up.At least one of the actuators corresponding to commands D2-D20 and SAFETY is activated or damaged.Bring the actuators to the rest position. If this signal persists, contact the support service of the machine manufacturer.The red LED blinks three times during start up.The battery is at. Replace the battery with a charged one.The red LED blinks four times during start up.At least one of the actuators corresponding to commands A1-A8, L1-L8, H1-H8 and SAFETY is activated or damaged.Bring the actuators to the rest position. If this signal persists, contact the support service of the machine manufacturer.c. Procedure to save the address -press the STOP pushbutton -press the START pushbutton and do not release it until the green LED switches o -unlock the STOP pushbutton

Navigation menu