Audio Partnership PLC MGV2-010 Bluetooth Speaker User Manual Manual

Audio Partnership PLC Bluetooth Speaker Manual

User Manual

1. Touch the area of your NFC device against the logo on top of Go V2. 2. Go V2 will enter automatic pairing mode and ‘Go V2’should appear on your device.1. Press and hold the button to enter Bluetooth pairing mode 2. Enable Bluetooth connectivity on your Bluetooth device (eg. phone, tablet etc) and pair with the Go V2 (you may need to consult your phone or tablet operating instructions).User’s ManualTo enjoy Bluetooth audio, you must first ensure that the Go V2 is connected to mains power or its battery is charged.Then pair the Go V2 with your Bluetooth enabled device.13Pairing a second deviceAux inputThere is an Aux input on the rear of the unit that allows any analogue device to be connected. Connect the charging adaptor to the Go V2 and charge for 4 hours before first use.The charging LED will indicate Orange whilst charging and Green when fully charged.Press and hold the power button on the top of the unit for one second to turn it on.12Battery SafetyAuto power downTo save power, your Go V2 will automatically turn off after 30 minutes if no music is playing. Press the power button to turn the Go V2 back on.Low battery warningA flashing Red LED indicates that the battery is too low and the Go V2 will enter a standby mode where no music can be played. This LED will continue flashing for 30 minutes after which the Go V2 will turn off. USB ChargingThe Go V2 can be used to charge compatible mobile devices.If the charging adaptor is not connected this will drain the battery.Your Go V2 contains a high performance battery and charging system that is designed to work in temperatures that do not exceed 50°C (122°F). Leaving this product in an automobile where temperatures may exceed this limit may result in permanent battery damage, fire or explosion. Do not leave your product in any location where temperatures may exceed this limit. If the Go V2 is not used for a long time, please recharge the battery every two months to maintain the battery in optimal condition.Top tipsTo talk to us, call +44 (0)20 3514 1521 (UK Local) or 1 8773578204 (USA)Press the button to select the Bluetooth input.Bluetooth set-upSuccessful pairing will be signalled by a ‘beep’ from the unit and the LED will turn solid blue. Pairing Your Device Using NFCPairing Your Device ManuallyPortable Bluetooth SpeakerPress the button to select the Aux input.To pair a different device, press and hold the button to enter pairing mode and pair your Bluetooth device as described in the Bluetooth instructions.2ORNFC

Navigation menu