Attenti PB-830-2 Call Button and Pull Tag User Manual

3M Residential Monitoring, Inc. Call Button and Pull Tag Users Manual

Users Manual

Part Number - 350109601 Revision – A00-000 Wireless Resident Monitoring Solutions Emergency Call Button Operational Instructions The HomeFree system was designed to monitor special needs and Dementia individuals in the care center environment. The Emergency Call Button is one of the many unique elements of this system. The Emergency Call Button is a small, lightweight push button unit worn by the resident / nurse that alerts care center staff members whenever the resident / nurse activates an emergency call alert. The Emergency Call Button can be worn as a pendent, watch style or clip-on. The Emergency Call Button is not for use outside the monitored area. Activating the Emergency Call Button: The Emergency Call Button is turned off by the manufacturer before shipment and must be activated before use. To activate, hold the Emergency Call Button firmly in your hand and press the panic button continuously for 2 seconds. The LED indicator flashes indicating that the Emergency Call Button is in active mode. Panic Button LED Indicator
Part Number - 350109601 Revision – A00-000 Once in active mode, the Emergency Call Button sends a status message to the monitoring station (every 60 minutes) indicating the current battery status as well as the location of the Emergency Call Button. This status message is sent until the Emergency Call Button is deactivated. Activating a Panic Alert Press the panic button. The LED indicator flashes indicating that the Emergency Call Button is in panic alert mode. Once in panic alert mode, the Emergency Call Button sends a panic alert message (every 20 seconds) to the monitoring station. This message is sent until the panic alert is deactivated. Deactivating a Panic Alert Press the panic button 6 times in quick succession (within 5 seconds). The LED indicator lights up for 3 seconds indicating that the panic alert has been deactivated. Even though the panic alert has been deactivated, the Emergency Call Button is still in active mode. Therefore, the Emergency Call Button still sends a status message to the monitoring station. This status message is sent until the Emergency Call Button is deactivated. Deactivating the Emergency Call Button Holding the Emergency Call Button firmly in your hand, press the panic button continuously for 10 seconds. The LED indicator lights up for 3 seconds. During this 3-second period, press the panic button 2 times in succession. The Emergency Call Button is now in deactivated mode (turned off).
Part Number - 350109601 Revision – A00-000 FCC Notices Note: The following is applicable only to the 433MHz version of this product. FCC ID: QUX-PB-830-2 FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 15 STATEMENT The equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna, 2. Increase the separation between the equipment and the receiver, 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, 4. Consult the dealer or an experienced radio/TV technician for help. Caution Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. In case of any problems please contact your local service provider: HomeFree Systems Inc. Phone: 1-800-606-0661 Outside US call: +927-3-7671900 E-mail:contactusa@homefreesys.com Web Site: www.homfreesys.com

Navigation menu