Askey Computer MDPNA23XT GPS Navigator+MP3 User Manual Manual

Askey Computer Corp GPS Navigator+MP3 Manual

Manual

GPS navigator+MP3MDPNA23XT MXX  User Menual
Contents Safety and Maintenance .....................................................1 Safety Instructions............................................................. 1 Data Security.................................................................. 2 Operating Environment..................................................... 2 Repair............................................................................ 2 Ambient temperature ....................................................... 3 Electromagnetic Compatibility ........................................... 3 Connection ..................................................................... 4 Cabling .......................................................................... 4 Information about the Regulatory Compliance according to R&TTE ........................................................................... 5 Battery Operation ............................................................ 5 Maintenance ................................................................... 6 Care of the Display .......................................................... 6 Recycling and Disposal ..................................................... 7 Transport ....................................................................... 8 Notes on these Operating Instructions .................................. 9 Quality........................................................................... 9 Service .......................................................................... 9 Supplied Items ................................................................ 10 Description of the components.........................................11 Overview front ................................................................ 11 The Multifunction Touchpad............................................. 13 Overview Back Side.......................................................... 14 Initial Set-up.................................................................... 15 I. Charging the battery ..................................................... 15 II. Power Supply .............................................................. 16 Car Adapter .................................................................. 16 AC Adapter (optional)..................................................... 17 II. Switching on the Device ............................................... 18 III. Installing the Navigation Software................................. 20
ii General Operating Instructions ........................................ 21 Switching on/off the device ............................................... 21 Working with Memory Cards .............................................. 22 Inserting Memory Cards ................................................. 22 Removing Memory Cards ................................................ 22 Accessing Memory Cards ................................................ 23 Data exchange via card reader ........................................ 23 Resetting the Navigation System........................................ 24 Soft Reset .................................................................... 24 Hard Reset ................................................................... 24 Navigation........................................................................ 25 Safety Instructions for Navigation ...................................... 25 Tips for Navigation......................................................... 25 Notes for Use in a Vehicle ............................................... 26 Additional Notes for Use on a Bicycle or a motorcycle......... 26 Aerial Orientation............................................................. 27 I. Mounting the Car Holder ................................................ 28 II. Fixing the Suction Plate ................................................ 29 III. Attaching the Navigation System .................................. 30 IV. Connecting the Car Adapter.......................................... 31 V. Starting the Navigation Software.................................... 32 Handsfree facility by means of Bluetooth ........................33 Starting the Bluetooth application ...................................... 33 Pairing the navigation device and the mobile phone............ 34 MP3 Player (optional) ...................................................... 35 Main Screen Overview ...................................................... 35 Select a Title and Move it into the List of Favourites............ 37 List of Favourites ........................................................... 38 Picture Viewer (optional) .................................................39 Operating the Picture Viewer ............................................. 39 Main Screen .................................................................... 39 Full Image View............................................................. 40 Travelguide (optional) .....................................................42
iii FAQ ..................................................................................43 Customer Service .............................................................44 First-Aid in the Event of Malfunction ................................... 44 General guidance........................................................... 44 Check Connections and Cables ........................................ 44 Faults and Possible Causes ................................................ 45 Additional Support ........................................................... 46 Appendix ..........................................................................47 Special CleanUp Function .................................................. 47 Synchronisation with the PC .............................................. 49 I. Installing Microsoft® ActiveSync®.................................. 49 II. Connecting with the PC .............................................. 50 III. Working with Microsoft® ActiveSync®.......................... 50 GPS (Global Positioning System) ........................................ 51 External GPS antenna .................................................... 52 TMC (Traffic Message Channel) .......................................... 52 Installing the External TMC Receiver (optional) .................. 53 Additional Card Material .................................................... 54 Transfer of card material to a memory card....................... 54 Alternative Installation of the Navigation Software from a Memory Card ................................................................ 55 Transferring Installation Files and Map Material to the Internal Memory............................................................ 56 Mounting on (Bicycle) Handlebars ...................................... 57 Specifications...................................................................58 Warranty .......................................................................... 59 Liability limitations ........................................................... 60 Copying this manual......................................................... 60 Index ...............................................................................64
iv Copyright © 2007 All rights reserved. This manual is protected by copyright. All rights reserved. Copying mechanically, electronically and any other way is prohibited unless written permission from the manufacturer is obtained. The company Medion® owns the copyright. Subject to technical and optical changes as well as printing errors.
Safety and Maintenance 1 Safety and Maintenance Safety Instructions Please read this section carefully and follow all the instructions given. This will help ensure reliable operation and extend the ser-vice life for your appliance. Keep the packaging and the user instructions for future reference or inquiries at a later date. If you pass the article on to another person, you must pass on these instructions. • Never allow children to play with electrical equipment unsupervised. Children may not always correctly recognize possible danger. • Keep the packing materials, such as foil away from chil-dren. The danger of suffocation could arise in the case of misuse. • Never open up the housing of the appliance or the power adapter. These contain no user-serviceable parts. If the housing is opened there is a danger to life from electric shock. • Do not place any objects on the appliance and do not exert any pressure on the display. Otherwise there is a danger that the screen will break. • To avoid damage, do not touch the screen with sharp ob-jects. Use only the stylus provided or another blunt imple-ment. The device can also be operated with a finger in many cases. • There is a risk of injury if the display breaks. If this should occur, use protective gloves to pack the broken parts and contact customer support to arrange for disposal. Then wash your hands with soap, since there is a possibility that chemicals may have escaped.
English 2 Remove the power adapter from the outlet, switch the appliance off immediately, or do not actually switch it on, and contact Cus-tomer Service... ... if the power adapter (optional) or the attached plug become scorched or damaged. ... if the housing of the appliance or the power pack becomes damaged or fluids leak into it. Components must be checked by Customer Service in order to avoid damage! Data Security • Every time you update your data make backup copies on an external storage medium. The supplier does not assume liability for data loss or damage to data storage units, and no claims can be accepted for damages resulting from the loss of data or for consequential damages. Operating Environment Failure to follow these instructions may lead to damage to your appliance. The guarantee will be excluded in such cases. • Keep your navigation System and all connected devices away from moisture and avoid dust, heat and direct sun-light, especially in the car. • Make sure you protect your appliance from getting wet, e.g. from rain and hail, at all times. Please pay attention that moisture can even build up in a protective pouch be-cause of condensation. • Avoid heavy vibrations and shaking, such as can arise, for example, in the case of transverse field intrusions. • Avoid the device from releasing itself from its holder, for example when braking. Install the device as vertically as possible. Repair • Please contact our Service Center if you encounter techni-cal problems with your appliance. • In the event repair becomes necessary, please use only our authorized Service Partners. You will find the address on the back of your guarantee card.
Safety and Maintenance 3 Ambient temperature • The appliance is most reliably operated at an ambient tem-perature of between 41°F and 104°F (5°C and 40°C) and at a relative humidity of between 10% and 90% (non-condensing). • In the powered down state the appliance can be stored at between 32°F and 140°F (0°C and 60°C). • Store the appliance in a safe location to avoid high tem-peratures (e.g. when parking or from direct sunlight). Electromagnetic Compatibility • When connecting additional or other components the “Elec-tromagnetic Compatibility Directive” (EMC) must be ad-hered to. Please also note that only screened cable (maxi-mum 10ft) should be used with this appliance. • For optimal performance, maintain a distance of at least 10 ft. from sources of high-frequency and magnetic inter-ference (televisions, loudspeaker systems, mobile tele-phones and so on. This will help avoid malfunctions and loss of data. • Electronic devices emit electromagnetic waves during op-eration. These emissions are harmless, but can interfere with other devices operated in close proximity. While our devices are tested and optimized for electromag-netic compliance in our laboratories, interference during operation may still occur in the device itself and with other devices in its proximity. Should such interference occur, try to eliminate it by ad-justing the positions of and the distances between the de-vices. Before driving a car, please ensure that the electronic sys-tems of the car are working properly.
English 4 Connection When connecting your appliance be sure to correctly observe the following instructions: Power supply through Car Adapter • The car adapter should only be connected to the lighter so-cket of a car (car battery = DC 12V , truck battery = DC 24V !). If you are in any doubt about the power source in your car, contact your car manufacturer. Power supply through AC adapter (optional) • The outlet must be in the vicinity of the appliance and must be easily accessible. • To disconnect your appliance from the power source, re-move the mains adapter from the power socket. • Only use the mains adapter on sockets at AC 100–240 V~ AC, 50/60 Hz. If you are unsure about the power supply to the place of use, ask the relevant en-ergy supplier. • Use only the power adapter provided with your appliance. • Do not cover the power supply unit, in order to avoid dam-age through unacceptable warming. • Stop using the power supply unit if the housing or the feed line to the device is damaged. Replace it with a power sup-ply unit of the same type. • For additional safety, we recommend the use of a surge protector in order to protect your appliance from damage from spikes or lighting strikes on the power network. Cabling • Arrange cables so that no-one can tread on them or trip over them. • Do not place any items on the cable.
Safety and Maintenance 5 Information about the Regulatory Compliance according to R&TTE The following radio equipment has been supplied with this device: • Bluetooth The company declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Complete declarations of conformity are available un-der www.medion.com/conformity. Battery Operation Your appliance is operated with a removable battery. In order to pro-long the life and efficiency of your battery and to ensure safe opera-tion, follow the instructions below: • Batteries cannot withstand heat. Avoid the appliance and the integrated battery becoming overheated. Failure to comply with this instruction may lead to damage to and even explo-sion of the battery. • Use only the original power pack (optional) to charge the bat-tery or the car adapter from the optional navigation kit. • The batteries are special category waste. When dis-posing of the appliance ensure that this is done correctly. Contact Customer Service for more details.
English 6 Maintenance Warning There are no user-serviceable or cleanable parts inside the housing of the appliance. You can prolong the life of the appliance by taking the following simple steps: • Always remove the power plug and all connecting cables before cleaning. • Clean the appliance only with a damp, lint-free cloth. • Do not use solvents, caustic or gaseous cleaners . • The device and its packaging are recyclable. Care of the Display • Avoid scratching the display surface as this is easily dam-aged. It is strongly recommended to use a display protec-tion mylar to avoid scratches. Please ask your nearest dealer for this accessory. The foil on the display at delivery is purely for protection during transportation! • Ensure that no traces of water remain on the screen. Water can cause irreversible discoloration. • Use only a soft, lint-free cloth to clean the screen. • Do not expose the screen to either strong sunlight or ultra-violet radiation.
Safety and Maintenance 7 Recycling and Disposal Device At the end of its life, the appliance must not be disposed of in household rubbish. Enquire about the options for environmentally-friendly disposal Packaging To avoid damage during transport, the PC is stored in a packag-ing. Packaging is produced mostly from materials which can be disposed of in an environmentally friendly manner and be profes-sionally recycled.
English 8 Transport If you wish to transport the appliance follow the instructions below: • Following transport of the appliance wait until the unit has acclimatized before using it. • In the case of wide fluctuations in temperature or humidity condensation or moisture may form inside the appliance and this can cause an electrical short-circuit. • In order to protect the appliance from dirt, knocks and scratching, use either the protective case. • Before travelling ensure that you are aware of the power and communications provision at your destination. Before travelling obtain any power or communications adapters that may be needed. • When shipping your appliance use only the original packag-ing and advise the carrier accordingly. • When passing through the hand luggage control at airports, it is recommended that you pass the appliance and all magnetic storage media (external hard drives) through the X-ray system (the machine on which you place your bags). Avoid the magnetic detector (the structure through which you yourself pass) or the magnetic wand (the hand device that the security staff use), since this may corrupt your data.
Safety and Maintenance 9 Notes on these Operating Instructions We have structured these Operating Instructions for the installa-tion so that you will be able to look up the necessary subject-related information by means of the Contents List at any time. Note You will find comprehensive Operating Instructions for navigation on the relevant CDs/DVDs and at the online help of the device. Read the section "Frequently Asked Questions" to obtain answers to questions that are often addressed to our customer service. The purpose of this manual is to help you with installing your appliance using instruction, that are easy to understand. Quality In selecting the components we have aimed for a high level of functionality, simple handling, safety and reliability. A well-balanced hardware and software design allows us to offer you a technologically advanced navigation system that will give great satisfaction in both work and leisure use. Service Our individual customer care is there to support you when you have questions or problems. Please get in touch – we look forward to helping you. This manual contains a special section on Cus-tomer Service starting on page 44.
English 10 Supplied Items Please check the integrity and completeness of the supplied items and, in the case this is not complete, forward us any possible claims within 14 days from the purchase date. The purchase pa-ckage includes: • Navigation system • Power cable for cigarette lighter • Car holder • CDs/DVDs with navigation software • Support CD • Instruction manual and warranty card Optional • AC adapter • External GPS antenna • Memory card Mini-SD • USB-cable • Earphones • Bicycle fixture • External TMC receiver • Protective case / storage pocket
Description of the components 11 Description of the components Overview front Ref Component Description 1 Play/Pause button Starts the playback and/or interrupts the playback 2 Earphone connector Connects to a pair of stereo headphones (3,5 mm). Using this appliance at full volume for extended peri-ods of time may cause damage to the hearing ca-pacity of the listener. 11 12 1 2 3 4 5 6 7 8 9 10
English 12 Ref Component Description 3 Microphone For recording 4 On-/Off button Switches the device on or off by pressing it once for short time. 5 Mini-SD Slot Accepts an optional Mini-SD card for re-movable storage. 6 Reset Opening Restarts your appliance. (Soft Reset, see page 24). 7 Touch Screen Displays the output of your appliance. Tap on the screen with your finger, a stylus or a "blunt" tipped pen to select menu commands or enter data. 8 Multifunction Touchpad Description next page 9 Mini-USB-Connector Connection for connecting to a PC by means of a USB cable (for data matching) as well as connection to external power supply. Here you also have the possibility (optional) to connect a TMC receiver. 10 Main switch/ Battery button Separates the device from the battery completely (also Hard Reset). 11 External aerial connection Connection for an optional second GPS aerial. 12 Battery Charge Indicator/ Bluetooth Indicator The loading display will shine red during the charging process. It will shine green when the accumulator is completely charged. This LED will shine blue when Bluetooth is activated.
Description of the components 13 The Multifunction Touchpad Symbol Description Decrease the volume Increase the volume Scroll upwards or downwards Scroll to the left or to the right Move to the previous file. It will be possible to skip backwards within the title playing while it is being played Move to the next file. It will be possible to skip forwards within the title playing while it is being played Selection button (Enter)
English 14 Overview Back Side Ref Component Description 1 Stylus Take the pen out of its compartment in order to use it, and replace it after use. The pointer pen is required for operating the touch screen. 2 Loudspeaker Plays back language statements and warnings. 3 Key Hold The device is provided with a key/button lock function that prevents the unintentional acti-vation of a key. GPS antenna 1 2 3
Initial Set-up 15 Initial Set-up The following guides you step by step through the initial Set-up of the navigation system. Firstly, remove the foil for protecting the device during transpor-tation from the display. I. Charging the battery Attention It can be necessary to recharge the battery for some time initially before it is possible to run through the ini-tial installation, according to the state of charging of the battery installed. Please pay attention to the following notes when handling the battery: • The charging status display will shine red until the naviga-tion system is charged. Do not interrupt the charging proc-ess before the battery is fully charged. This may take a few hours. The navigation system is fully charged if the charging display lights green. • You can use the navigation system during the charging process, but the power supply must not be interrupted dur-ing initial set-up. • Leave the external power supply connected to the naviga-tion system for around 24 hours, so that the backup bat-tery also charges-up fully. • You can leave the external power supply connected, and this is very handy for continuous operation. However, the mains adapter also requires power even when it is not charging up the battery of the navigation system. • It can take several minutes until the device is ready to op-erate again, following the connection of the external power supply, if the charging state of the battery is very low. • The battery will even be charged while the device is switched off completely.
English 16 II. Power Supply Car Adapter (similar picture) 1. Plug the jack (n) of the connection cable into the corre-sponding receptor at the bottom of your navigation system. 2. Insert the power adapter (o) now into the cigarette lighter socket and ensure, that it will not lose contact while driv-ing. This could cause a malfunction. n o
Initial Set-up 17 AC Adapter (optional) (similar picture) 1. Push the adapter connector into the guide on the back of the AC adapter. Press the push button at the same time, so that the adapter plug can engage. 2. Plug the cable of the mains adapter (n) into the mini-USB connection on the lower side of the navigation system. 3. Push the AC adapter (o) into a power point that is easily ac-cessible. Adapter plug o n
English 18 II. Switching on the Device 1. Switch the main switch at the bottom of the device to ON. Attention! Always leave the main switch in the ON Position, unless you want to carry out a new reinstallation. All data will be lost and the initial installation will have to be carried out again if the switch is set to OFF (see page 24). The Navigation System will start the initial installation automati-cally. The brand logo will appear and your device will display the application screen after a few seconds. Navigation page 25 Travelguide page 42 Additional applications Settings
Initial Set-up 19 Additional applications Note Brief pressure on the on/off button will be enough to switch the device on or off, provided that your navi-gation system is connected to an external source of electricity or is running in battery operation (standby mode). Press the on/off button for 4 seconds, if it is intended to switch off the device completely. It will be switched on again by pressing the on/off button for approx. 4 seconds, as mentioned above. No data will be lost during this because of the storage of data in the inter-nal memory. The starting process will only last slightly longer. Your device will be delivered in a status in which it will not switch off independently. You can adjust the period of operation to suit your needs using the Settings button on the main screen of your device. MP3 player, page 34 Picture Viewer, page 39
English 20 Your navigation system will use a low amount of electricity and the batteries will be discharged, even when it has been turned off. It is possible for the battery to loose so much energy that an ini-tial installation will be necessary once again, if you do not use the navigation system for a longer period. III. Installing the Navigation Software The final installation of the navigation software will take place automatically from the internal memory, during the initial setting up, if your device has already been equipped with the basic data of the navigation software at the factory. Follow the instructions on the screen. An optional memory card will always have to be inserted in the device during the use of the navigation system, if it contains digitalized map material. It will be necessary to carry out a Reset to restart the navigation system if the memory card has been removed, only for a short time, while the system was being used (see page 24). Please also read the chapter Navigation starting on page 25.
General Operating Instructions 21 General Operating Instructions Switching on/off the device Your device will be in its normal operating state after the initial setting up. You will activate and deactivate your device with the On-/Off switch. 1. To start your navigation system press briefly the On-/Off switch . Note Your device will be delivered in a status in which it will not switch off independently. You can adjust the period of operation to suit your needs using the Settings button on the main screen of your device. 2. To switch off your navigation system press briefly the On-/Off switch . Your navigation system will consume a small amount of electricity and the installed battery will be discharged, even when the device is switched off. It is possible for the battery to lose so much energy that an initial installation will be necessary once again, if you do not use the navigation system for a longer period.
English 22 Working with Memory Cards Your navigation system supports Mini-SD memory cards. Inserting Memory Cards 1. Carefully take the optional memory card out of its pack-ing (if included). Take care not to touch or dirty the con-tacts. 2. Insert the memory card carefully into the card bay with contacts pointing forward. The card must lock easily. Removing Memory Cards Note Only remove the memory card if the navigation soft-ware has been closed and the device has been switched off by means of the On/Off button before-hand. Otherwise you will risk a loss of data. 1. To remove the card press lightly onto the upper edge until it ejects. 2. Pull the card out without touching the contacts. 3. Store the memory card in the packing or in another safe location. Note Memory cards are very fragile. Take care not to dirty the contacts and not to force the card.
General Operating Instructions 23 Accessing Memory Cards • The appliance only supports memory cards in the FAT16/32 file format. If you insert a card prepared with a different format (e.g. in cameras, MP3 players), your navigation system may not recognize it and will ask you to format it again. Warning Formatting the memory card irretrievably wipes out all data. Data exchange via card reader However, if you wish to copy large quantities of data (MP3 files, navigation maps) to the memory card, these can also be stored directly to the memory card. Many computers already have memory card devices. Insert the card in this and copy the data directly to the card. Because of the direct access you can achieve a much higher transfer rate compared to using ActiveSync®.
English 24 Resetting the Navigation System Soft Reset Choose this option if your navigation system is not responding or working properly. This option restarts the navigation system, without reinstallation being necessary. A soft-reset is often used in order to reorganize the memory. In doing so all programs that are running are inter-rupted and the working memory is reinitialized. Perform the soft-reset as follows: Press the tip of the stylus into the soft-reset switch opening or insert a pointy object (e.g. a paper clip, which has been bent open) with slight pressure into the reset opening. Hard Reset Warning A hard-reset deletes all data on your appliance and causes a new initial installation. It is not necessary to install the software on your synchronisation computer again, however. Perform the hard-reset as follows: 1. Remove the external power source. 2. Push the On/Off switch of the device on the back of the de-vice first to the OFF position initially and back to ON after 2 seconds. 3. It will be necessary to carry out the software installation again after a Hard Reset.
Navigation 25 Navigation Safety Instructions for Navigation The bundled product CD/DVD contains a comprehensive instruc-tion manual. Tips for Navigation • Do not manipulate the navigation system while driving to protect yourself and others from accidents! • In the event that you do not understand the voice instruc-tion or if you are in any doubt about what to do at the next intersection, then the map or arrow display will provide you with a quick orientation. Only look at the display when you are in a safe driving situation! Legal remark The use of devices that warn for traffic monitoring sys-tems (like „speed traps”) is prohibited in some coun-tries. Please obtain information about the legal situa-tion and apply the waning function only where allowed. We cannot be held liable for damages caused by the use of the warning function. Attention The road layout and driving rules take precedence over the instructions of the navigation system. Only follow the instructions when circumstances and driving rules permit it! The navigation system will guide you to your destination even when you have to deviate from your planned route. • The direction statements of the navigation system given do not release the driver of the vehicle from his or her duty of care or personal responsibility. • Plan routes before you leave. If you want to plan a new route whilst on the road stop driving.
English 26 • In order to receive the GPS signal correctly, metal objects may not hinder reception. Attach the navigation system onto the inside of the windscreen or near the windscreen with the suction cup. Try out different positions in your ve-hicle in order to find the best reception. Notes for Use in a Vehicle • Take care that the holder does not present any risk to safe-ty, even in the case of an accident, when installing it. • The display of your navigation system may show “light re-flections”. Please take care of not being “blinded” during operation. • Take care that the cable does not impede any safety com-ponents. • Do not mount the components within the operating range of any airbags. • Check the secure adherence of the suction cup at regular intervals. • The power plug will consume power, even if no device is connected. Remove it when not in use to avoid draining the car battery. • Check all safety equipment in your car after installation. Note Do not leave your navigation software in the vehicle when you leave it. You should also uninstall the holder for security reasons. Additional Notes for Use on a Bicycle or a motorcycle • Pay attention during installation that the ability to steer is not impaired. • Do not cover any instruments during installation.
Navigation 27 Aerial Orientation The aerial must have unrestricted access to the sky to receive GPS satellite signals. Orient the aerial as horizontally as possible for this reason. Try out aerial and installation possibilities in the vehicle in the case of inadequate reception. It may be necessary to install an external GPS antenna (see page 52) under certain circumstances.
English 28 I. Mounting the Car Holder Attention! Only fix the holder for the navigation system to the windscreen, if it does not impede the view. Should this not be possible, then mount the holder with the en-closed suction plate in any way that will allow peril-free and safe operation. (similar picture) Note If you want to fix the holder to the wind screen, then you can skip steps 1 and 2. Suction plate (optional) Snap-in lever
Navigation 29 Note Your navigation system can also be equipped alterna-tively with another car mounting according to the ver-sion. 1. Remove the protective foil from the sticky side of the suction plate. 2. Fix the suction plate to a suitable location on the dashboard. Take care, that the surface of the dashboard is clean and press the suction plate strongly onto the surface. Note To obtain a strong and secure hold the suction plate should not be used for 24 hours. Note It cannot be excluded completely that certain plastics, strong solar radiation, etc. will affect or soften the ad-hesive strips and will be able to damage the surface of the dashboard through this. We shall not accept any liability for damage to the dashboard that may occur. 3. Connect the cradle to the car mounting. Pay attention to the inscription on the car mounting. The connection closes with a noticeable clicking sound (fig. see the next page). II. Fixing the Suction Plate Note Clean the disk thoroughly with a glass cleaner. Warm the disk and the nipple slightly at temperatures below 15° C. Place the holder with the suction head onto the suction plate (or directly onto the wind screen) and press the lever on the suction head downwards. The sucker will attach itself to the background firmly.
English 30 III. Attaching the Navigation System 1. Connect the car adapter (see page 16) and, if necessary, the external GPS aerial, to your navigation system and in-sert the memory card. 2. Place the device below in the centre of the cradle, press it gently backwards until it engages audibly and press the holder downwards. 3. Place the cradle on the fixing catches of the car holder. 4. Now, push the unit downwards until it engages audibly. 5. Now you will be able to place the complete unit on the cleaned windscreen or the suction plate. (ill.: cradle without device) (ill.: cradle with device) (similar picture) Holder open Holder closed
Navigation 31 IV. Connecting the Car Adapter (similar picture) 1. Plug the jack (n) of the connection cable into the corre-sponding receptor at the bottom of your navigation system (p. 14). 2. Insert the power adapter (o) now into the cigarette lighter socket and ensure, that it will not lose contact while driv-ing. This could cause a malfunction. Note Remove the power adapter from the cigarette lighter socket when ending a trip or when parking the car for a extended period of time. Otherwise the car battery could be drained. In this case use the power switch to turn off the navigation system. n o
English 32 V. Starting the Navigation Software Note Your memory card will always have to be inserted into the device during the use of the navigation system, if the card contains (additional) mapping material. It will be necessary to carry out a reset to restart the navigation system if the memory card has been re-moved, only for a short time, while the system was being used (see page 24). This Reset will take place automatically, according to the navigation system. 1. Switch on your navigation system. 2. The Navigation software will start automatically or after tap-ping on the navigation control button on the main screen, according to the version. 3. Tap on Navigation on the screen for entering the destina-tion and enter the address of your navigation destination. Confirm your entry by clicking the 9 symbol to start the navigation. You will receive the route information on the screen, augmented by language statements, after a short time, if the satellite reception is adequate. Further information regarding the navigation software can be found in the comprehensive manual on your navigation CD(s)/DVD(s). This is a pdf-file you can read and print with the any Acrobat Reader. Note The GPS-receiver will require some minutes for initiali-zation when deployed for the first time. Even when GPS signal reception is indicated the navigation could be imprecise. In all future instances it will take about 30-60 seconds until a correct GPS-signal is available, sufficient “sight” of the satellite is a prerequisite.
Handsfree facility by means of Bl t th 33 Handsfree facility by means of Bluetooth The Bluetooth technology serves to bridge short distances wire-lessly. Bluetooth devices transmit data wirelessly, so that other devices that also support this technology can communicate with each other without cables. Both devices will have to be adjusted to each other (pairing), be-fore you will be able to use your navigation system as handsfree equipment with your Bluetooth mobile phone. Note Please read how you switch on the Bluetooth function in the Operating Instructions of your mobile phone. Starting the Bluetooth application 1. Click the Settings Menu Point on your navigation device. 2. Click on the Bluetooth Option. Note Bluetooth will be reactivated by operating this control button and the Bluetooth LED will shine, if Bluetooth has not been activated. 3. Now the main Bluetooth screen will appear on your naviga-tion device.
English 34 Pairing the navigation device and the mobile phone 1. Make your mobile phone search for a Bluetooth device. Note Each mobile phone uses different paths to do this. Read the instructions of your mobile phone under all circumstances for this reason. 2. You will be requested to enter a PIN code (at least 4 digits) as soon as your mobile phone has found the navigation de-vice. 3. Also repeat the entering of the PIN code on your navigation device. 4. Your mobile phone will be recognized and the handsfree fa-cility through the navigation system will now be available to you. Note This procedure will have to be repeated as soon as you switch the navigation device off or a spatial distance arises between your mobile phone and the navigation device. Switching on the navigation device will be enough for automatic recognition, according to the mobile phone used and its Bluetooth setting.
MP3 Player (optional) 35 MP3 Player (optional) Depending on the software equipment your navigation system is equipped with an MP3 player. Your navigation system is also equipped with an MP3 player. 1. Start the MP3 player from the main screen by tapping the ‘Further Applications, MP3 Player’ switch areas. Alterna-tively, the MP3 player can also be started from the naviga-tion software itself. 2. All the MP3 files located on the memory card can be taken over into a List of Favourites and will be ready to be played. Main Screen Overview Button Description or Move to the previous or next file. It will be possible to skip backwards or forwards within the title playing while it is being played. or Increase or decrease the volume. The display in the upper right corner of the screen will show the current level of the volume.
English 36 Button Description For the title selection Opens the List of Favourites Play the playback. Pause the playback. Stop the playback. Changing the mode of playing: Normal: Plays all the files in their sequence and stops after the last file. Shuffle: Plays a file selected at ran-dom. Repeat: Repeats the current file con-tinuously. Repeat all: Plays all the files in their sequence and will restart from the first file, after the last one has been played. Break off action / Back to the previous Menu Close MP3 player
MP3 Player (optional) 37 Select a Title and Move it into the List of Favour-ites Tap on and select the title that you would like to move into the List of Favourites, in order to select a title. You will have three possibilities of marking the title here: • Tap on , in order to mark all the titles, including all sub-directories. • Tap on , in order to mark all titles currently in view. • Mark individual titles or remove the marking by pressing on it directly. The selected titles will be indicated by a . Tap on , in order to confirm your selection. The titles marked will not be moved into the List of Favourites until then. You will remove the marking of the title currently viewed with . Tap the file required and select the requisite title, in order to se-lect a title in the sub-directories. You will arrive back at the superordinate directory with . The symbol will be shown if not all the titles in a directory have not been selected.
English 38 List of Favourites You will reach the List of Favourites by tapping on the : You will delete individual titles with and you will delete all ti-tles with . Confirm with , in order to take over the new selection into the List of Favourites.
Picture Viewer (optional) 39 Picture Viewer (optional) Depending on the software equipment your navigation system is equipped with a Picture Viewer. You will be able to view the jpg format images on your memory card on your navigation system, with the Picture Viewer. All the images on the memory card will be available immediately. Operating the Picture Viewer Start the Picture Viewer from the main screen by tapping the ‘Further Applications, Picture Viewer’ switch areas. Alterna-tively, the Picture Viewer can also be started from the navigation software itself. Main Screen Ill.: Miniature view Move the miniature view to the left or to the right with both the arrow keys. Tap on a specific images, in order to display it in the Full Image Mode. The display in the upper right corner of the screen will show the current level of the volume. You will return to the start in the miniature view by tapping on . You will end the application by tipping on the symbol. You will start the slide show by tapping the symbol.
English 40 Full Image View Ill.: Full image view without service strip Tap in the lower area of the screen in the full image view, in or-der to activate the service strip: Ill.: Full image view with service strip Button Description Previous picture Rotate by + 90° Fade in grid Start the slide show Pause the slide show Rotate by – 90° Next picture
Picture Viewer (optional) 41 You will return to the miniature view by tapping in the centre of the image. The image displayed will be subdivided into 6 fields by tapping on the symbol (fade in grid). Ill.: Full image mode with grid The respective area of the image will be displayed as enlarged by tapping on a square: Ill.: Zoom-in Mode You will arrive back at the full image Mode by tapping in the cen-tre of the image.
English 42 Travelguide (optional) Depending on the software equipment your navigation system is equipped with a Travelguide. The Travelguide will supply general information about the differ-ent areas of individual towns and cities or regions in Europe, such as sights, restaurants, culture and travel information. Start the Travelguide from the main screen by tapping the ‘Travelguide’ switch areas. Alternatively, the Travelguide can also be started from the navigation software itself. Select the country initially, then the town or city (or the re-gion), if you wish to be informed about something. Then, select the category. Fig. 1 Fig. 2 Fig. 3 Fig. 4 Confirm with , if you want to navigate to the destination dis-played. The address will then be available to the navigation soft-ware as the destination. You will be able to vary the possibilities of selection within the Travelguide, according to the software pro-vided. Germany Luxembourg
FAQ 43 FAQ Where can I find more information on the navigation system? Detailed operating instructions for navigation can be found on the corresponding CDs/DVDs, which accom-pany your navigation system. Also use the additional Help functions that are available with a single touch of a button (usually F1 on the PC), or by selecting the Help option, as additional assis-tance. These aids will be provided to you while you are using the computer or the device. What do I need the accompanied CDs/DVDs for? The Support-CD contains: • the ActiveSync® program for balancing data between the navigation system and the PC. • Additional programs (optional). • This User manual in digital form. Contents of the navigation-CD(s)/DVD(s): • digital maps • Data for rapidly resetting the contents of the memory card • Manual of the navigation software Depending on the configuration one or more CDs/DVDs may be included in the package. The navigation system is no longer responding. What should I do? Carry out a reset (see page 24). How can I adjust the lighting? Under Settings.
English 44 Customer Service First-Aid in the Event of Malfunction Error functions can sometimes have trivial causes; however, they can also sometimes be complex in nature and require costly analysis. General guidance Note The regular running of the Windows® programs “De-frag” and “Scandisk” on the PC can remove sources of error and raise system performance. Check Connections and Cables Start with a careful visual check of all cable links. If the LCD’s are not working, make sure that the power is reaching the computer and all peripherals. Note Switch off the computer and check all cable links. If the computer is connected to peripherals, check also the plug connections of all cables. Do not arbitrarily swap the cables between various units, even if they appear to be precisely the same. The pin assignments of the cables are likely to be different. Once you have ascertained that the power supply is not at fault and all connections are intact, switch on the computer again.
Customer Service 45 Faults and Possible Causes The navigation system no longer reacts or is behaving atypically. • Carry out a reset (see page 24). The navigation system is recognized only as a guest by ActiveSync®. • See information on page 50. I am receiving error messages from a maintenance pro-gram after installing ActiveSync®. • The program places the WCESCOMM.LOG file in a tempo-rary directory defined by the system, which cannot be de-leted. A respective error message will appear, if another program attempts to do so. The GPS receiver cannot be initialized or found. If a GPS signal continues not to be reported on the screen, in spite of the correct installation of the system, this can be caused by the following factors: • Sufficient satellite reception is not possible. Solution: Change the position of your navigation system and ensure that unrestricted “sight” of the aerial is not impaired. No language statements can be heard. • Check the volume setting.
English 46 Additional Support If the suggestions in the above section have not solved your prob-lem, please contact our customer service hotline. However, before you contact your Technology Center, please have the following information available: However, before you contact your Technology Center, please have the following information available: • How is your computer configured? • What additional peripherals do you use? • What messages, if any, appear on your screen? • What software were you using when the error occurred? • What steps have you already undertaken to solve the problem? • Have you upgraded or removed drivers or hardware? • Can you manually repeat the problem? • If you have been given a customer number previously, please give this number to the technician.
Appendix 47 Appendix Special CleanUp Function The CleanUp function serves the targeted deletion of data, with-out using a PC. IMPORTANT Please use this function very carefully, because it is possible for data to be deleted that will only need to be entered again manually afterwards. The CleanUp function will be activated if the ‘o’ is pressed in the Gopal lettering of the Main Menu briefly, immediately after the start tone following a reset. The CleanUp function offers 6 options: 1. Remove Installation Only Removes the software installed from the ‘My Flash Disk’ memory [= part of the permanent memory in which the executa-ble parts of the navigation software will be located following the initial alignment (\My Flash Disk\Navigation)]. 2. Remove MAP Only Removes the digital maps from the ‘My Flash Disk’ memory (\My Flash Disk\MapRegions).
English 48 3. Remove Preload Only Removes the data needed for the installation of the navigation software from the permanent memory (\My Flash Disk\Install). 4. Remove All Deletes the whole contents of the ‘My Flash Disk’ memory. It will not be necessary to recalibrate the screen after this function has been carried out. 5. Factoryreset Sets the device back to the delivery status in the case of an intact main installation. 6. Format Flash Formats the internal ‘My Flash Disk’ memory. This formatting can be necessary in the case of a prolonged removal of errors. It will be necessary to recalibrate the screen after the formatting function has been carried out. All data will be deleted from the internal ‘My Flash Disk’ memory irrevocably, apart from this (see Remove All). Exit Leaving the CleanUp function and restarting the device (like reset) Note The deletion of the data must be confirmed before the action actually takes place. To do this, press on YES. There will be corresponding report if the data to be de-leted are meanwhile (no longer) available. Please read the „Transferring Installation Files and Map Material to the Internal Memory“ chapter on Page 56, in order to recreate the files (installation files and map material) in the internal memory.
Appendix 49 Synchronisation with the PC I. Installing Microsoft® ActiveSync® In order to transfer your data between your PC and your naviga-tion system you need the Microsoft® ActiveSync® program. The cost of the navigation system includes a license for this pro-gram which can be found on the Support CD. Attention Important files can be overwritten or changed during the installation of software. You should create a hard disk backup, in order to be able to have access to the original files in the case of possible problems following the installation. You must have administrator rights to install the software under Windows® 2000 or XP. Attention You should not connect the navigation system to your computer yet. 1. Insert the Support CD and wait until the program starts automatically. Note The Auto Run function is probably deactivated if it does not function. The Setup program on the CD must be started, to start installation manually. 2. Choose the language, click then Install ActiveSync® and follow the instructions on the screen.
English 50 II. Connecting with the PC 1. Press the On/Off button to start your navigation system. 2. Connect the USB cable (optional) to your navigation system. 3. Push the USB connector into a free USB port on your com-puter. 4. The hardware installation assistant recognizes now a new appliance and installs a suitable driver which can take some minutes. Repeat the die connection search if it fails the first time. 5. Follow the instructions on the screen. The program will now set up a partnership between your PC and the device. III. Working with Microsoft® ActiveSync® ActiveSync® will be started automatically if you connect your navigation system to the PC. The program will check whether the device is one with which a partnership has been entered. If this is the case, the changes that have taken place on the PC and on the navigation system since the last synchronisation will be compared and adjusted to each other. You will be able to define exactly which data will have priority during the synchronisation in the settings of the ActiveSync® Program. Call up the Help of the Pro-gram (with the F1 Button), in order to become familiar with the effects of the respective settings. A restricted Guest Access, with which you will be able to exchange data, for example, will become active automatically if the navigation system has not been recog-nised as a partner. If this is the case, although the process con-cerns the registered partner device, separate your navigation sys-tem from the PC and switch it off and on again. Now connect your navigation system to the PC, to restart the recognition process. Repeat the process and, restart your PC in addition, if your device continues to be recognised as a guest. Note: Make sure that you always connect your navigation system to your PC with the same USB connection, otherwise your PC will allocate an additional ID and reinstall the device.
Appendix 51 GPS (Global Positioning System) GPS is a satellite-backed system for determining your position. With the help of 24 satellites revolving around the earth, it is pos-sible to determine your position on earth with the accuracy of a few meters. The satellite signals are received by the antenna of the built-in GPS receiver, which must have a "line of sight" to at least 4 of these. Note By limited line of sight (e.g. in tunnels, between houses, in woods or also in vehicles with metal-coated windows) it is not possible to determine the position. The satellite reception however automatically picks up again as soon as the obstacle has been passed and there line of sight is re-established again. Moving slowly (e.g. slow walking) also limits the accuracy of the navigation. The GPS receiver consumes additional power. This is especially of concern, when running on batteries. To conserve power do not turn on the GPS receiver unnecessarily. Also terminate the Navi-gation Software, if it is not needed or satellite reception is not possible for a longer period, for this reason. However, you can also switch the device off by means of the On/Off switch in the case of a shorter interruption to your journey. Pressing the same switch again will activate a restart. The GPS receiver will also be reactivated at the same time, if navigation software is still active. Here, it can take a short time for the position to be updated again, according to the reception situation. Note Please note, that your appliance is preset to not shut down automatically after a few minutes without activ-ity. You can change this preset in the Settings mode. If the GPS receiver has not been active for some hours, it must orientate itself again. This process may take a while.
English 52 External GPS antenna This second optional GPS antenna makes it possible to receive the signals of satellites better (e. g. in the case of vehicles with a metallized windscreen). 1. The antenna should be pointing upwards. 2. Push the plug of the external GPS antenna into the opening provided for it (see page 11). TMC (Traffic Message Channel) The Traffic Message Channel (TMC) is a digital radio data ser-vice that functions in a similar way to RDS and is used to transmit disruptions to traffic to a suitable reception device. The traffic information is continuously transmitted across FM. The user is less dependent on the half-hourly broadcast traffic information, because the signal is continuously transmitted. Apart from this, important information, as in the case of people driving on the wrong side of the road for example, can be passed on im-mediately. The transmission is planned for the whole of Europe and is al-ready offered by radio transmitters in many countries. The preci-sion of the TMC messages can deviate greatly according to the country. The evaluation of TMC messages is not supported by every type of navigation software. Enquire whether your system supports TMC before the possible purchase of a TMC receiver.
Appendix 53 Installing the External TMC Receiver (optional) Please proceed as follows to connect your TMC receiver to your navigation system. 1. Connect the mini-USB plug to the mini-USB connection of your device. 2. Connect the projecting antenna to the TMC receiver and at-tach that antenna with the aid of the suckers, at the edge of your windscreen, for example. (similar picture) 3. Connect the TMC receiver to the car adapter cable after you have attached the TMC receiver to your navigation system. Your navigation system will now be able to receive traffic informa-tion through the TMC receiver and thus to avoid potential disrup-tions to traffic.
English 54 Additional Card Material Your navigation system is already equipped with digitalized map material in the internal memory and/or on a memory card at the factory. Depending on the configuration, additional maps may be included on your navigation CDs/DVDs. You will be able to transfer these cards to a memory card immediately. Here, it is recommended to use an external card reader (see also page 23). Depending on the amount of map data on the CDs/DVDs, memory cards with capacities of 256 MB, 512 MB, 1.024 MB or more may be required. You will obtain additional memory cards (MMC or SD cards) in specialist stores. Transfer of card material to a memory card The transfer of additional card material to a memory card will preferably take place through the Explorer of your PCs. Proceed as follows: 1. Insert the CD/DVD with the card material required. 2. Start your workstation and select your CD/DVD Drive. 3. Copy the file with the .psf ending out of the Directory of the region that you require to the MapRegions Directory on your memory card, from the CD/DVD. You can transfer several files with map material to your memory card, depending on the capacity of the memory card. There must be sufficient space on your memory card. If you have copied digitized maps of several countries or country groups onto your memory card, you will be required to select the desired map in the navigation application of your device.
Appendix 55 Alternative Installation of the Navigation Soft-ware from a Memory Card The software for your navigation system can also be installed di-rectly from a memory card prepared accordingly The pre-installed software may have to be uninstalled beforehand (see special CleanUp function, Page 47). You will be requested to install the navigation software during the initial adjustment. Please proceed as follows: 1. Remove the memory card from the packaging carefully. Pay attention that the contacts are not touched or soiled. 2. Push the memory card into the SD-/MMC slot until it en-gages. 3. Click on OK, in order to install the application. The main screen, through which you will now be able to carry out the navigation settings, will appear after all data has been copied to your navigation system.
English 56 Transferring Installation Files and Map Material to the Internal Memory Note The navigation system must be connected to a com-puter by means of ActiveSync® (see Page 50), for the transfer of the data. Your device has an internal, permanent memory, which is located in the \My Flash Disk directory. You will be able to make this directory, and others, visible with ActiveSync®, by means of the Search option. Directories and files can be manipulated as in Windows Explorer. The required directory must have been stored, in order to make the installation files and the map material for the device available. Deposit the INSTALL directory for the installation files at (\My Flash Disk\INSTALL). Deposit the map material in the MapRe-gions directory (\My Flash Disk\MapRegions). Please pay atten-tion to the modes of lettering given above when naming the direc-tories. Pay attention to the fact that sufficient drive capacity must be available, if you have stored additional data on your navigation device. Remove files not needed if sufficient drive capacity is not available.
Appendix 57 Mounting on (Bicycle) Handlebars You can attach your navigation system to a bicycle as an optional additional feature. A special holder is needed to do this. The installation is explained in the following. (similar picture) 1. Release both the screws connecting the clamp to the hold-ing plate with the hexagon key. 2. Remove the rubber ring and wind it around the handlebars. 3. Position the clamp on your bicycle handlebars, by pulling it across the handlebars from below. 4. Put the holding plate back onto the clamp and retighten both the screws. 5. Seat the holder for the navigation system on the holder plate until it locks into place audibly. Please pay attention to the fact that the holder must only be seated in one di-rection. 6. Now place the device on the holder. You must pay attention to firm positioning. Note Your navigation system could also be equipped with a different bicycle mounting, where the attachment of mountings can vary slightly, according to the version. Holding plate Hexagon key Screws Clamp
English 58 Specifications Parameter Information Power supply mains adapter Input output KSAFD0500250W1UV 100-240V ~0.2A + 5V 1.0A max. Power supply cable for a ciga-rette lighter Input output Atech ATPI-68HT0501 10-30V 1.3A max. / fuse 2A + 5V 1.0A max. Earphones Stereo earphones (3.5 mm) Memory card type Mini- SD Connector type of the external GPS receiver MMCX USB interface USB 1.1 Dimensions approx. 106 mm x 67 mm x 20 mm Weight incl. battery approx. 140 g (without packaging) Operating +41 °F – +104° F (+5° C - +40° C) Temperaturen Storage +32 °F – +140 °F -0° C - +60° C Humidity (without condensation) 10 – 90 %
Warranty 59 Warranty The receipt serves as proof of first purchase and should be kept in a safe place. Your legal rights are not limited by these warranty conditions. It is required should you need to make use of the guarantee. We guarantee that this equipment is in perfect working order. Upon production of the receipt, the remaining period of guarantee shall pass on from the original parts to the respective replacement parts. If you hand in this equipment to make use of the guaran-tee, you must remove all programs, data and removable storage media. Products which are sent without accessories will be re-placed without accessories. The warranty obligation does not ap-ply in the case of the problem being caused by an accident, a ca-tastrophe, vandalism, misuse, incorrect use, ignoring the safety and maintenance regulations, changes by software, viruses or another piece of equipment or accessories or by other modifica-tions not approved by ourselves. This limited guarantee declara-tion replaces all other guarantees of express or implied nature. This includes the guarantee of saleability or the suitability for a certain purpose but is not limited to this. In some countries the exclusion of implied guarantees is not permissible upon principle. In this case the validity of all express and implied guarantees is limited to the guarantee period. Once this period has expired, all guarantees become invalid. In some countries limiting the period of validity for implied guarantees is not permitted, so that the above limitation does not come into force. If you have any ques-tions with regard to these guarantee conditions, please contact us.
English 60 Liability limitations The contents of this manual are subject to unannounced changes caused by technical progress. Manufacturer and sales shall not be responsible for any damages which have been caused as a result of omissions or errors in the information provided in this manual. Under no circumstances shall we be liable for any of the following: 1. Claims made against you by third parties based on loss or damage. 2. Loss or damage to your blanks, recordings or data. 3. Economic follow-on damage (including lost profit or sav-ings) or associated damage even in the case that we have been informed of the possibilities of this type of damage. In some countries the exclusion or limitation of accompanying or follow-on damage is not legally accepted so that the above limita-tions do not come into force. Copying this manual This document contains legally protected information. All rights reserved. Copying in mechanical, electronic and any other form without the written approval of the manufacturer is prohibited.
European Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms. z EN 55022(CISPR 22) Radio Frequency Interference z EN 55024(EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61000-3-2, EN61000-3-3)Generic Immunity Standard z EN 60950(IEC950) Product Safty R&TTE (CE) MANUAL REGULATORY REQUIREMENT (Bluetooth) Bluetooth Restrictions: European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835GHz In France, the equipment must be restricted to the 2.4465-2.4835GHz frequency range and must be restricted to indoor use. CE Declaration of Conformity Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards. z EN 300 328 V.1.6.1(2004-07) z EN 301489-1 V.1.4.1(2002-04) / EN301 489-17 V.1.2.1(2002-04) z EN 50385:2002 z EN 60950:2000 61
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that maycause undesired operation. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. 62
For mobile devices without co-location condition( the transmitting antenna is installed or located more than 20cm away from the body of user and near by person ) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. 63
Index 64 Index A AC Adapter..........................17 Accessing Memory Cards .......23 Additional card material.........54 Aerial Orientation .................27 Alternative installation of the navigation software from a memory card ....................55 Ambient temperature ............. 3 Attach Navigation System......30 Auto run .............................49 Auto start............................49 B Battery Operation.................. 5 Bluetooth Pairing.............................34 C Cabling ................................ 4 Car Adapter.........................16 Card reader .........................23 Care of the Display ................ 6 CleanUp func .......................47 Contents ............................... i Copying this manual .............60 Customer Service .................44 D Data exchange.....................23 Data Security........................ 2 Defragmentation ..................44 E Electromagnetic Compatibility . 3 EMC .................................... 3 External aerial connection......12 External GPS antenna ...........52 F FAQ ................................... 43 Faults and Possible Causes .... 45 First-Aid ............................. 44 Fixing the suction plate......... 29 G GPS ................................... 51 External GPS antenna........ 52 H Hotline ............................... 46 I Initial set up Power supply.................... 16 Switching on the navigation system ......................... 18 Initial set-up Charging the battery ......... 15 Installing the navigation software ....................... 20 Introduction ..........................9 L Liability limitations ............... 60 M Main switch/ Battery button... 12 Maintenance..........................6 Malfunction ......................... 44 Memory cards...................... 22 Microsoft® ActiveSync®......... 49 Mini-USB-Connector ............. 12 Mounting the car holder ........ 28 Mounting the Navigation Set on a Bicycle ..................... 57 MP3 Player List of Favourites .............. 38 Main Screen Overview ....... 35
English 65 Select title........................37 N Navigation Attaching the navigation system .........................30 Fixing the suction plate ......29 Mounting the car holder .....28 Safety instructions.............25 Starting the navigation software .......................32 O On-/Off button .....................12 Operating Switching on/off the device.21 Operating Environment .......... 2 P Picture Viewer Main screen......................39 Operation.........................39 Q Quality................................. 9 R R&TTE ................................. 5 Recycling and Disposal ........... 7 Repair ................................. 2 Reset Opening .....................12 Resetting the navigation system ............................24 S Safety and Maintenance ......... 1 Safety instructions Navigation........................25 Connection.........................4 Data security...................... 2 Operating environment ........2 Repair ...............................2 Power supply......................4 Cabling..............................4 Battery operation................5 Maintenance.......................6 Care of the display ..............6 Transport...........................8 Scandisk............................. 44 SD/MMC Slot....................... 12 Service.................................9 Special CleanUp function....... 47 Specifications ...................... 58 Standards R&TTE...............................5 Starting the navigation software .......................... 32 Stylus ................................ 14 Supplied Items .................... 10 Synchronisation with the PC .. 49 T TMC ................................... 52 Installing the external TMC receiver ................. 53 Touch Screen ...................... 12 Transfer of card material to a memory card ................. 54 Transferring Installation Files and Map Material to the Internal Memory ............... 56 Transport..............................8 Travelguide......................... 42 W Warranty ............................ 59

Navigation menu