Arts Digital Technology SMK480 MIC GUY Sing-along with Bluetooth Music User Manual SMK480 CE971 IM English 161125

Arts Digital Technology (HK) Limited MIC GUY Sing-along with Bluetooth Music SMK480 CE971 IM English 161125

User Manual

SMK480MIC GUY Sing-along with Bluetooth MusicINSTRUCTION MANUALThank you for purchasing this Singalong. Please read this instruction manual carefully before using this product to ensure proper use. Keep this manual in a safe place for future reference.
EN - 1WARNINGSC A UTION:TO P R EVEN T T H E RI SK O F ELECTRIC SHOCK, DO NOT REMO V E COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENWARNING: TO REDUCE THE RISK OFFIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.This symbol is intended to inform you t h at important operating and maintenance instructions are included in the literature accompanying this product.DRIPPING WARNINGThe product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product.VENTILATION WARNINGThe normal ventilation of the product shall not be impeded for intended use.Class ll equipment symbolThis symbol indicates that the power adaptor has a double insulation system.IC WarningRSS-Gen Issue 4 November 2014"&"CNR-Gen 4e éditionNovember 2014:- English:This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.- French:Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareildoit accepter toutbrouillageradioélectriquesubi, mêmesi le brouillageestsusceptible d'encompromettre le fonctionnement.
FCC WARNINGNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television (which can be determined by turning the equipment off), the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced / TV technician for help. 1. Read these Instructions.2. Keep these Instructions.3. Heed all Warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has twoblades with one wider than the other. A grounding type plug has two blades and a third grounding prong.The wide blade or the third prong are provided for your safety. When the provided plug does not fitinto your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, conveniencereceptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with theapparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoidinjury from tip-over.Portable Cart Warning13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has beendamaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objectshave fallen into the apparatus, the apparatus has been exposed to rain or moisture , does not operate normally,or has been dropped.EN - 2The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.Avertissement: pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.L’appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu’un vase, ne doit être placé sur l’objet.The MAINS plug / power adaptor is used as the disconnect device, it should remain readily operable during intended use.In order to disconnect the apparatus from the mains completely, the main plug / power adaptor should be disconnected from the mains socket outlet completely.La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.WARNINGS:Battery shall not be exposed to excessive heat such as sunshine, fire or the like.Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu ou autres choses de semblable. IMPORTANT SAFETY INSTRUCTIONSEN - 3Caution Marking and rating plate was located at bottom enclosure of the apparatus. Les marquages sont inscrits en bas de l'appareil.Les précautions d'emploi sont inscrites en bas de l'appareil.Class II equipmentAC voltageDC voltageRECYCLINGThis product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.User has the choice to give his product to a competent recycling organization or to the retailer whenhe buys a new electrical or electronic equipment.Hazard live partsSymbols ExplantationNon-rechargeable batteries are not to be recharged,Rechargeable batteries are to be removed from the toy before being charged,Rechargeable batteries are only to be charged under adult supervision,Different types of batteries or new and used batteries are not to be mixed,Batteries are to be inserted with the correct polarity,Exhausted batteries are to be removed from the toy.The supply terminals are not to be short-circuited,Not connected more than recommended number of power supplied Warning ! Not suitable for children under 36 monthsThe toy is not intended for children under 3 years oldThe model number or specification of a suitable transformer for use with the toyThe transformer is not a toy,Toys liable to be cleaned with liquid are to be disconnected from the transformer before cleaning.Transformers (Input 100 - 240V ~ 50/60 Hz 0.5A, Output DC 5V / 0.6A) used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and that, in the event of such damage, the toys must not be used with this transformer until the damage has been repaired. The toy must only be used with the transformer for toys
EN - 4ContentsSMK480 Main Unit with Microphone1.AC Power Adaptor2.Instruction Manual4.Warranty Card5.Line-in Cable3.WHAT’S IN THE BOX
EN - 5CONTROL LOCATIONSPlay/ Pairwith LED indicatorRecordwith LED indicatorVolume +Volume -HandlePower on/offwith LED indicatorSong 1Song 2Effect 3Mic 1 JackMic 2 JackLine In JackEffect 2Effect 1Song 3 MicrophoneMicrophoneon/off switchSpeakerBattery CompartmentDC Jack
EN - 6POWER CONNECTIONConnecting AC PowerPlug the Power Adaptor into the AC jack that located on the rear of the product and plug the other end into a standard AC socket. CAUTION: The AC Adaptor has a polarized plug that fits into the wall outlet only one way. If the plug does not fit properly, turn it over and try again. Do not force it.NOTE: When the unit is intended for being unused for a long period of the time. Please turn off the unit and unplug the power adaptor from the AC wall outlet.Battery OperationBefore installing batteries (not included), ensurethat the unit is disconnected from the mainssupply.Remove the battery compartment cover on thebottom of the unit by a screw driver. The battery cover can then be lifted away.Fit 3 x 1.5V AA-size batteries (not included),referring to the polarity markings inside thebattery compartment. Never mix old and newbatteries. Finally, replace the cover.For battery operation, switch off the mainssupply and remove the AC power adaptor from the power socket, battery operation will be selectedautomatically.Caution:There is a danger of explosion if batteries are replaced incorrectly.Replace batteries with the same type and same brand only.If the unit will not be used for a long period of time, turn OFF the unit and remove all batteries from the main unit.
EN - 7First time pairing1. Press the power button to turn on the unit. 2. The unit will search the paired device with the Bluetooth indicator flashing quickly. 3. Turn on Bluetooth function of your device and enable the search or scan function to find the main unit. (See your device's instructions to add or setup a Bluetooth device).4. Select "SMK480" from the device list when it appears on your device screen.5. After successfully paired with a device, the Bluetooth indicator will stay lit in blue and you will hear “paired” which confirms the pairing had been done.To pair with another Bluetooth device1. Press and hold the PAIR button for 2 seconds to unpair your Bluetooth device.2. Repeat above step 2 to 5 to pair another Bluetooth device.Playing from a paired Bluetooth deviceYou can play music from your Bluetooth device wirelessly to the main unit by following the steps below after successfully paired.1. To play your favorite song, press the PLAY button on your Bluetooth device to start playback.2. Press the VOLUME +/- buttons on the main unit until you obtain a comfortable listening level.3. Press the SKIP buttons of the Bluetooth device to skip to previous or next song.Note: 1. Remember to turn off the main unit after you have finished listening.2. Please do not forget to switch off the power of your external audio device as well if you do not use it for other purpose.NOTE:Before pairing, make sure the LINE IN cable is not plugged into the LINE IN jack.BLUETOOTH PAIRING AND CONNECTIONEstablish a safe sound levelOver time your hearing will adapt to continuous loud sound and will give the impression that the volumehas in fact been reduced. What seems normal to you may in fact be harmful. To guard against this beforeyour hearing adapts, set the volume to a low level.Slowly increase the level until you can hear comfortably and clearly and without distortion. Damage to yourhearing is accumulative and is irreversible. Any ringing or discomfort in the ears indicates that the volumeis too loud. Once you have established a comfortable listening level, do not increase the sound level.Adjusting the VolumePress the VOLUME buttons to increase / decrease the volume.
EN - 8SING WITH YOUR MICROPHONE1. The Mic Guy itself is actually a microphone. Plug the microphone jack into the mic jack at the back of the unit. 2. The Microphone switch is located on the unit. To turn the microphone ON, pick up the microphone from its platform, which will automatically switch ON. You can sing with your microphone now. Once you finish put the microphone back to its platform. It will switch OFF automatically.3. There is another mic jack for extra microphone (not included). Once you plug in the extra microphone, please also pick up the Mic Guy microphone in order to switch ON the microphones. The extra microphone should have ON/OFF switch by itself. Please also turn it ON before singing.Microphone (Mic Guy)Microphoneon/off switchToggle switchto ON1 332Extra Microphonenot included
1. Press Power button to turn on the machine. Red LED indicator will turn on. There are 3 built-in songs and 3 sound effects inside the singalong player.2. Press song 1, 2 and 3 buttons to play three different songs. Press the button again to stop.3. Press effect 1, 2 and 3 buttons to play three different sound effects. 4. Adjust the volume by pressing Vol + or Vol – 5. You can plug the microphone in and sing with built-in songs.BUILT-IN SONGS AND SOUND EFFECT LINE-IN FUNCTION1. While you are singing, press record button, the record LED flashes. Your voice with music will be recorded. Press record button again to stop recording.2. You can listen your recording by pressing the Play button. The record LED stays lit. Press the button again to stop.3. Please note that each time when a new recording is being recorded it will cover the old recording.RECORD AND PLAYBACK FUNCTIONThe unit will automatically turn into standby mode in 15 minutes in the following situations. The power LED indicator will be turned off:1. No Bluetooth connection for 15 minutes2. No playback from your external music player for 15 minutes.3. No button being pressed for 15 minutes.4. Not playing music & singing to the microphone for 15 minutes.The unit would be turned on again by pressing any button. The power LED indicator will be turned on.ENERGY SAVING1. Press POWER button to turn on the unit. Red LED indicator will turn on.2. Plug a 3.5mm line-in cable into your external music player and connect the other end into the LINE IN jack on the back side of the unit.3. Make sure your external music player is turned on and the unit has been turned on4. Start music playback on your external music player.5. Adjust volume by pressing Vol+ or Vol –6. You can plug the microphone in and sing with music you play.Note: the player is set to be LINE-IN priority which means once line-in cable plugged in, it will switch to LINE-IN mode automatically. To go back to Bluetooth mode unplug the line-in cable.EN - 9
If a fault occurs, first check the points listed below before taking the unit for repair. If you are unale to remedy a problem by following these hints, consult your dealer or service center.WARNING: Under no circumstances should you try to repair the unit yourself, as this would invalidate the guarantee. IMPORTANT: Due to continual revision and improvement on our product design, specifications are subject to change without further notice.Power Supply DC 4.5V (“AA” cell 1.5V x 3pcs, not included) Or AC power adaptor Input 100 - 240V ~ 50/60 Hz 0.5A Output DC 5V / 0.6ALine in 3.5mmPower output 1W (RMS)Dimension 10.4”W x 6.7”H x 3.3”D PROBLEM POSSIBLE CAUSE REMEDYNo sound in generalNo sound from microphoneVolume not adjusted.No battery in battery compartmentMicrophone is switched offPress the vol + buttonPut 3 new AA size batteries into the battery compartment according to instructionsSwitch on the microphoneNo sound in line in mode The music player is not playing.The line in cord is not properly connected.Start to play the music in your music player. Adjust volume by pressing volume buttons on the unit.Follow instruction to connect the line in cord between the unit and the music player. Adjust volume by pressing volume buttons on the unit.TROUBLESHOOTINGTECHNICAL SPECIFICATOINEN - 10Pair the unit with the BT Device as the procedures stated in this manual.Bluetooth reception failure The external device is far from the unitPut the external BT device close to the unit.Have not paired

Navigation menu