Arts Digital Technology CEU7100BT BLUETOOTH TOWER SPEAKER WITH USB CHARGER User Manual CHT910

Arts Digital Technology (HK) Limited BLUETOOTH TOWER SPEAKER WITH USB CHARGER CHT910

User manual

BLUETOOTH TOWER INSTRUCTION MANUALMODEL: PSP264PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS PRODUCT TO RAINOR MOISTURE.WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRICSHOCK, AND ANNOYING INTERFERENCE, USE THERECOMMENDED ACCESSORIES ONLY.FCC NOTICE:This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant topart 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmfulinterference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energyand, if not Installed and used in accordance with theinstructions, may cause harmful interference to radiocommunications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by turning theequipment off and on, the user is encouraged to try tocorrect the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.FCC WARNING:To assure continued compliance, follow the attachedinstallation instructions and use only shielded cableswhen connecting to other devices. Modifications notauthorized by the manufacturer may void user`s authorityto operate this device.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.1To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases shall not be placed on apparatus. The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.WARNING:FCC Warning:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Before using the unit, be sure to read all operating instructions carefully. Please note that theseare general precautions and may not pertain to your unit. 1) Read these instructions. All the safety and operating instructions should be read before the product is operated.2) Keep these instructions. The safety and operating instructions should be retained for future reference.3) Heed all warnings. All warnings on the product and in the operating instructions should be adhered to.4) Follow all instructions. All operating and use instructions should be followed.5) Do not use this apparatus near water. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.6) Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11)Only use attachments/accessories specified by the manufacturer.12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. An appliance and cart combination should be moved with care. Quick stop, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.13) Unplug this apparatus during lightning storms or when unused for long periods of time. To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.15) Power source This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions.For example, this unit may not have the capability to be connected to an outdoor antenna.2
INSTALLATION3Assemble the wooden base to the main body by the supplied screws and washers. 1. Speakers2. Base3. Screws4. WashersNote:2134
MAIN UNITLOCATION OF CONTROLS4DC IND 2V AANTDC INDC 12V 2 AANTC 1 , 1.51.5123456789101112131.USB CHARGE Port2.AUX IN Jack3.Indicator4.SOURCE Button5.EQ Button6.POWER Button7. Play/Pause Button8.TUNE- (Previous) Button9.TUNE+ (Next) Button10.VOL+(Volume Up)11.VOL-(Volume Down)12.FM Antenna13.DC IN Jack
~ Green: Radio~ Blue: Bluetooth4. During Playback:~ Press the VOL (Volume) buttons to adjust volume level as desired.~ Press the EQ button repeatedly to select and set equalizer mode as desired.to shut off the unit if no using for long period of time. NOTE: Pull out the AC/DC Adapter plugGENERAL OPERATIONS1. Insert the AC/DC Adapter plug into a conveniently located AC outlet having 100-240V~50/60Hz. The Indicate will light up Red.2. Press the Power button on the unit or remote control to power on the unit.corresponding color as below:3. Press the SOURCE button repeatedly to switch to desired mode.The color of Indicator turns to 5. When finished listening, press the Power button to power off the unit.The indicator will turn Red. 5~ Press the or button to skip track. ~ Press the (Play/Pause) button to pause. Press again to resume normal playback.~ Red: Standby~ Violet: AUX IN
6Power on the unit and press -During playback •Press VOLUME+/- buttons to adjust the volume level.the SOURCE button on control plate until the indicator turns Green.NOTE: When power is off, or unplugging the adapter, station need to be re-searched.2. Press and hold TUNE- or until a station is found and it will play automatically.FM RADIOsearched station.NOTE: If the reception is not good, please unwind and extend the antenna to get better reception. TUNE+ to search station automatically 1. Press button to search manually to play the TUNE- or TUNE+
1. Power ON the unit.3. Turn on the BT function on the external BT device and play the music as usual. 4. During palyback: Press the VOL (Volume) +/- buttons to adjust volume level. Press the or button to skip track. Press the (Play/Pause) button to pause. Press again to resume normal playback.NOTES:BLUETOOTH PARING AND PLAYBACKIn first time use, pairing the external BT device as below:A. Power ON the unit, press the SOURCE button repeatedly until theB. Power ON the external BT player and enter to searching mode. Start pairing as the on screen instructions on the external BT Player (For details pairing procedures, please refer to the user’s manual of your BT device.).C. When the external BT player searched the Speaker, our model number “PSP264” will 2. Press the SOURCE button on the unit until the color of Indicator turns Blue. Indicator turns to Blue and blinking.7appear on the display of external BT device. Select it and make pairing. D. Pairing code “0000” may need to enter. E. After successful connection, play music as usual.
4. Press the SOURCE button repeatedly until the color of Indicator turns to Violet.3. Power ON the unit.1. Connect one end of supplied audio connection cable to the AUX IN jack on the top of the unit2. Connect the other end to the Audio out/Line out/Phone jack on the external player (such like iPhone, iPad, MP3 player, Discman... etc.).5. Play the music in the external player as usual. LISTEN TO EXTERNAL AUDIO DEVICES as the figure above.8
USB CHARGE92.Insert one end of the USB charging cable to the USB CHARGE port, insert the other end to the external device to charge. NOTE:The output power is 5V, 2.1A.X I1. Power on the unit.
Check the followings before requesting serviceSYMPTOM POSSIBLE CAUSE POSSIBLE SOULTION desired mode.Press the SOURCE button repeatedly to set the input source to the desired modeTROUBLESHOOTING GUIDENo powerNo soundSound distortionVolume level too highBass level of the connected device too highInput source incorrectThe connected device is not in payback modeVolume in minimum positionwall outlet Plug to the wall outlet.Raise volume level by pressing the VOL (Volume) + buttonPlay the music/movie in the connected device as usual and make sure the volume level of it is in high levelReduce the bass level of the connecteddeviceVOL (Volume ) - buttonReduce the volume level by pressing the AC/DC adapter plug not connected to the 10Bluetooth reception failureHave not pairedThe external device is far fromthe unit Put the external BT device close to theunitPair both units as BT pairing page
AccessoriesTECHNICAL SPECIFICATIONSSpeakers ............................................................................................................................... 5W x 2Bluetooth Working Distance...........................................................................................Up to 30 feet (Measured in open area. Wall and structures may affect the effective range.)1 x AUX IN Cable1 x User Manual1 x AC/DC AdapterAC/DC Adapter Input........................................................................................................AC 100-240V~50/60HzOutput............................................................................................DC 12V 1.5 A11 FM 87.5 -108.0 MHzRadio Coverage.................................................................................................receiverThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu