Arts Digital Technology CEU6800BT Bluetooth Speaker for Tablets User Manual

Arts Digital Technology (HK) Limited Bluetooth Speaker for Tablets

UserManual.wiki >

Arts Digital Technology >

CEU6800BT User Manual

User Manual.pdf

INSTRUCTION MANUALRead this instruction manual before operating the appliance. Save it for future reference. Model: CEU6800-BT

1IMPORTANT SAFETY INSTRUCTIONSWhen used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.1. Read these instructions – All the safety and operating instructions should be read before the appliance is operated.2. Keep these instructions – The safety and operating instructions should be kept for future reference.3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.4. Follow all instructions – All operation and use instructions should be followed.5. Do not use this apparatus near water – The appliance should not be used near water; for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.6. Clean only with dry cloth – The appliance should be cleaned only as recommended by the manufacturer.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. Protect the adapter / power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.10. Only use attachments / accessories specified by the manufacturer.11. Unplug the ac adaptor of this apparatus during when unused for long periods of time.12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as ac adaptor is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

2IIIMPORTANT SAFETY INSTRUCTIONSCONTINUE13. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus.14. Power Sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. Do not overload wall outlet.15. Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seek advice from your local qualified service technician or contact the distributor via the telephone number at the back of this instruction manual.16. Nameplate is located on bottom of the product.•Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.IMPORTANT NOTESAvoid installing the unit in locations described below:•Places subject to constant vibration.•Dusty, humid or moist places.

3COMPLIANCE WITH FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

1LOCATION OF CONTROLS AND INDICATORSPREPARATION FOR USE1. Standard accessories Unpack the unit carefully. Carefully remove all the accessories from the display carton. We recommend that you save the box and packing materials, in case you wish to store the unit. Don't remove any labels or sticker on the rear of the unit and adaptor. Before setting up the unit, verify that the following access- ories are present : -- Instruction manual -- 1 x AC power adapter -- AUX in line cord 2. Power source This unit is supplied with an AC adapter, take the following steps to connect the adaptor. a. Unwind the power cord of the AC adapter to its full length. b. Connect the DC plug of the AC adapter to the DC IN jack on the rear of the unit. c. Plug the AC adapter to the AC outlet ( 100-240V ~50/60Hz). Connecting this system to any other power source may cause damage to the system. For sufficient ventilation, Keep other objects at least 10cm away from the unit.1.2.3. 6. 5.1. Adjustable dial for iPad stand.2. Rubber spacer.3. ON/OFF, PAIRING/AUX indicator. 7.4.4. POWER ON/OFF switch. 5. USB Charger port. 6. AUX IN Jack. 7. DC IN Jack.

2DOCKING AN iPAD1. Put your iPad in landscape position. (Do not encourage to put in portrait position) 2. Adjust the view angles of the support hinges to your desire. AUXILIARY INPUTThis unit includes an AUX input jack to allow you to connect external devices, such as an iPhone /iPod or MP3 player, and listen to the music stored on your external device through the speakers of this unit. 1. Connect a 3.5mm connection cable to the AUX IN jack on the rear of the unit and the line out of the headphones jack on your external audio device. 2. Set the POWER ON/OFF switch to turn on the unit. The ON/OFF indicator will light blue steadily. 3. Operate your external device as usual to select and play music. Note: You may need to turn your external audio device ON as well. 4. Adjust the volume controls on your external audio device to the desired volume level. 5. Turn off your external audio device when finish listening. 6. Set the POWER ON/OFF switch to OFF position to turn CEU6800 off and unplug the AUX IN Jack.

Navigation menu