Arts Digital Technology CE2300BT Bluetooth CD Boombox AM/FM Digital Read Out with 6 Speakers User Manual

Arts Digital Technology (HK) Limited Bluetooth CD Boombox AM/FM Digital Read Out with 6 Speakers

User Manual

INSTRUCTION MANUALBluetooth Boombox withAM/FM Digital Readout Radioand CD playerCE2300-BTThank you for purchasing this CD Boombox. Please read this instruction manual carefully before using this product to ensure proper use. Keep this manual in a safe place for future reference.
1WHAT’S IN THE BOXContents1. CE2300 CD Boombox2. AC Power Cord3. Instruction Manual4. Warranty CardIf you are missing any parts above, please contact ADT Digital LLC.Tel: 561 922 6886Fax: 561 922 6159
2The CAUTION marking is located on the bottom panel.CD compartment
3NOTE: CAN ICES-3 (B)/NMB-3(b)NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television (which can be determined by turning the equipment off), the user is encouraged to try to correct the interference by one or more of the following measures:FCC AND CANADIAN ICES
4WARNINGS:•To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.Avertissement: pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluieet l’humidité.• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,shall be placed on apparatus.L'appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide,tel qu'un vase, ne doit être placé sur l'objet.• Mains plug /Power adaptor is used as disconnect device and it should remain readily operable during intended use.•Battery shall not be exposed to excessive heat such as sunshine, fire or the like.Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à la lumière du soleil, au feu ou autres chosesde semblable.In order to disconnect the apparatus from the mains completely, the main plug/ power adaptor should bedisconnected from the mains socket outlet completely.La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation. Pour êtrecomplètement déconnecté de l'alimentation d'entrée, la prise doit être débranchée du secteur.
123456789101112 161718191314155123456789101112RADIO-CD- -AUX FUNCTION SWITCH VOLUME KNOBPHONE JACKBASS BUTTONCD DOOROPEN AREATUNING KNOBAM-FM-FM ST. BAND SWITCHAUX IN JACKPOWER ON/OFF BUTTON DISPLAY(POSITIVE LCD)PROG. BUTTON1314151617181920212223SKIP BUTTONPOWER INDICATORSTOP BUTTONREPEAT BUTTONSKIP BUTTONFM ST. INDICATORPAIR, PLAY/PAUSE BUTTONROD ANTENNAHANDLEAC SOCKETBATTERIES COMPARTMENT20 212223
6Connecting PowerPlug the supplied AC power cord into the AC jack that located on the rear of the product and plug the other end into a standard AC socket. The unit is designed to operate from a main supply of AC 120V~60Hz.Battery Operation POWER CONNECTION Use only the size and type of batteries specified.Be sure to follow the correct polarity when installing the batteries as indicated in the batterycompartment. Reversed batteries may cause damage to the device.Do not mix different type of batteries together (e.g. Alkaline and Carbon Zinc) or old batteries withfresh ones.If the device is not to be used for a long period of time, remove the batteries to prevent damage orinjury from possible battery leakage.Do not try to recharge batteries not intended to be recharged, they can overheat and rupture(Follow battery manufacturer’s directions).Rechargeable batteries are to be removed from the product before being charged.Rechargeable batteries are only to be charged under adult supervision.Exhausted batteries are to be removed from the product.The supply terminals are not to be short-circuited.Battery shall not be exposed to excessive heat such as sunshine, fire or the like.1.2.3.4.5.6.7.8.9.10.CAUTION: The supplied AC power cord has a polarized plug that fits into the wall outlet only one way. If the plug does not fit properly, turn it over and try again. Do not force it.NOTES: When the unit is not operated by the AC power or unused for long periods of time, please remove the AC mains plug from the wall outlet and unplug from the main unit.RemoveThe AC power cord MUST be disconnected from the unit, otherwise it will not operate on battery power.
7Plug into AC power or install batteries by following instructions on the previous Power Connectionsection. Press the POWER button to ON position to turn on the unit. The POWER indicator will be lighted up.Switching between different sources (RADIO/CD/ /AUX)After turning on the unit, slide the FUNCTION switch to select different sound sourcesAdjusting sound volume levelAfter turning on the unit, turn the VOLUME knob to adjust the level of sound volume.Adjust ing the rod antenna The aerial should be extended to ensure good reception in both Bass BoosterDuring music playback, press and toggle the BASS button to turn on/off the bass booster for bassenhancement.FM radio modes. It may be necessary to adjust the position of the unit and /or aerial position to achieve the best signal reception. The unit is designed to play normal music CD disc bearing the correct identication logo. If the discdoes not confirm to the standard, it may not be played back properly.Caution:• Playback of CD-R/CD-RW may depend on recording conditions.• Do not attach a seal or label to either side (the recordable side or the labeled side) of a CD-R/RW disc. It may cause malfunction.• Do not load a blank CD-R/ RW disc. It will take over 1 minute to read the disc. The disc maybe damaged if you try to open the CD Door while reading the disc.• CD-ROM, CD-I, CDV, VCD, DVD or computer CDs are not possible to be read.Loading disc1. Slide the FUNCTION switch to CD position on the unit.2. Press down the OPEN AREA on the CD door to unlock and open the CD door.3. Hold the CD disc by its edge with CD graphical side facing up and put it onto the CDcompartment after the CD door is opened. Make sure that the disc label is facing up.4. Close the CD door.CD playbackAfter loading the disc, the disc will begin spinning and the total number of the tracks on the disc will be shown on the display. Press the PAIR, PLAY/PAUSE button once, the first track on the CD willbe played back.SWITCHING ON FOR THE FIRST TIMECD OPERATION
8Remark:• If there is no disc in the unit, “No” or “Er” will be indicated on the display.• If the CD cannot be read, “No” or “Er” will be indicated on the display.Remark:• The unit can store up to 20 tracks in the programmable memories. During the programmedplayback, user can still select the “repeat 1/repeat all” functions.• During playback, if you press STOP button once to stop the playback, the programmed tracks willbe stored. If you want to re-run the programmed tracks, press PROG button again and then press PAIR, PLAY/PAUSE button.Play/Pause ControlTo pause playback temporarily by pressing the PAIR, PLAY/PAUSE button. Music playback will be paused and the current elapsed track number will be shown on the display and the play icon will be blinking. Press the PAIR, PLAY/PAUSE button again to resume playback.Stop playbackTo stop playback, press the STOP button on the unit. The total number of tracks of the disc will be displayed.Skip trackDuring playback, press the forward or backward SKIP buttons to skip to the next or previous tracks.High-speed music searchDuring playback, press and hold the forward or backward SKIP buttons to skip/search through the current track at high speed in forward or backward directions. When the SKIP buttons are released, normal playback speed will be resumed immediately.Repeat playback modes (Repeat 1/Repeat all)Repeat the Current TrackDuring playback, press the REPEAT button until the icon is displayed to select the current trackto be repeated. The selected track will be repeated continuously.Repeat All TracksDuring playback, press the REPEAT button until and ALL icons are displayed. All tracks on the disc will be repeated continuously.Return to normal playbackPress the REPEAT button until NO repeat indicator is displayed. The normal playback will be resumed.Programmed CD playbackThis unit can be programmed to play up to 20 tracks in CD mode. Load the music CD disc onto the CD compartment (without pressing the “PAIR, PLAY/PAUSE” button)1. Press PROG button once in the stop mode. “PROG” icon and the selected track “00”will be shownon the display and blinking.2. Press the SKIP buttons to select the desired track to be programmed.3. Press PROG button again to save the selected track.4. Repeat steps 2-3 to program up to 20 tracks.5. Press the PAIR,PLAY/PAUSE button to play the programmed tracks after programming is completed.The “PROG” icon will be displayed during the programmed playback.6. To clear program and resume normal playback, press the STOP button twice during playback, oropen the CD door, or change to RADIO mode or to clear the programmed tracks.1
9Pairing is the term used when two Bluetooth devices are connected wirelessly for the first time.BLUETOOH OPERATIONBLUETOOTH SETUP1. Power on the unit by pressing the POWER button. 2. Slide the FUNCTION switch to position on the unit. 3. The Bluetooth indicator will flash light quickly. If the unit does not automatically begin to pair, press and hold the PAIR, PLAY/PAUSE button. 4. Using the native controls on your Bluetooth Device, select the "CE2300BT" in your Bluetooth setting to pair. If your devce requests a password, enter the default password "0000". Refer to the user's manual for your specific device for instructions on pairing and connecting Bluetooth device. 5. When successfully paired, the Bluetooth indicator will stop flashing. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the devices. If your device should become unpaired, follow the above steps again. If any pairing issues should occur, un-pair the unit on your Bluetooth device and follow the above steps again.PLAYING MUSIC VIA BLUETOOTH1. Follow the instructions for Pairing a Bluetooth Device. 2. Use the native controls on the connected Bluetooth Device to select a track. 3. To play, pause or skip the selected track, use the native controls on the connected Bluetooth Device or press the PAIR, PLAY/PAUSE button of unit. 4. Audio played through the connected Bluetooth device now be heard through the speaker.
10The unit is designed to receive FM Stereo/FM and AM radio bands.1. Slide the FUNCTION switch on the top of the unit to select RADIO mode.2. Slide the BAND switch on the side of the unit to select FM ST, FM or AM band.3. Adjust the TUNING knob on the side of unit to tune the frequency of desired radio station.4. The tuning frequency will be displayed on the LCD display.5. For the FM stereo mode, please slide the BAND switch to FM ST position. The FM ST. indicatorwill be lighted up when the reception signal is strong.6. For the FM mono mode, please slide the BAND switch to FM position. The FM ST. indicator willbe turned off.7. For the AM mode, please slide the BAND switch to AM position.Remark:The unit has built-in AM ferrite bar antenna, which can provide adequate reception in most areas. If the AM reception is weak, try to adjust the location of the unit or relocate the unit to improve the reception. If the FM reception is weak, try to adjust the length and the angle of the FM antenna to improve the signal reception.Setting up (AUX-IN) connectionAUX-IN jack will allow you to connect external music player or external sound source to the main unit. 1. Plug into a 3.5mm audio cable (not included) into your external music player and connect theother end (3.5mm jack) into the AUX- IN jack on the top of the unit.2. Make sure your external music player is turned on.3. Slide the FUNCTION switch to AUX position on the unit.4. Start music playback on your external music player.5. Adjust VOLUME knob to control the sound level of music playback from the speakers on the unit.RADIO OPERATIONAUX-IN OPERATION
1TROUBLE SHOOTINGPROBLEMUnit will notturn on.No sound. Increase volume.No sound when playing audio via BluetoothClean or replace disc.Volume set too low.Slide the FUNCTION switchto AM, FM or FM ST.FM: Antenna is notproperly adjusted.Rotate unit until bestreception is obtained.AM or FM, no sound.Power is not onDisc insertedLQFRUUHFWO\ Reinsert disc correctly.'LUW\RUGHIHFWLYH&'7U\DQRWKHUGLVFMoistureFRQGHQVDWLRQRQGLVFWipe disc with soft cloth.'LVF&RPSDUWPHQWGRRUQRWFORVHGPOSSIBLE CAUSEAC cord notconnected.SOLUTIONCheck AC cordconnection.Close Disc CompartmentGRRUDisc will not play.VOLUME controlVHWWRPLQLPXP'HIHFWLYHGLVF Try another disc.Erratic playback.Dirty or defectiveGLVFIncrease volume.Retune the AM or FMbroadcast station.Reorient FM antenna.Station is not tunedSURSHUO\AM/FM, poor sound.AM: Unit is notpositioned correctly.Your Bluetooth device has been paired properly.Pairing your Bluetooth device according to the "Bluetooth setup" section.Increase the volume of your Bluetooth device.The volume control of your Bluetooth device is set at too low.The volume control of the unit is set at too low.Increase the volume of the unit by VOLUME control.
12Power Output .............................................................. 5 watt RMS x2Specifications are typical, individual units might vary. They are subject to continuous improvementwithout notice and without incurring any obligation.Speakers ..................................................................... 8 Ohms 8 W 3 inch x2, 2 inch x2, 1.5 inch x2.CD Disc- Disc Diameter .............................................. 120mm/80mmAC Power .................................................................... AC120V~60Hz Battery Size ................................................................. UM-1 or D-Size batteries x 8 PCSRadio Frequency ......................................................... FM: 87.5 – 108MHz , AM: 530- 1710 KHzDimensions (H x W x D) .............................................. 160mm x 385mm x 250mmWeight ......................................................................... 2.7 kgSPECIFICATIONS

Navigation menu