Arista Networks SS300ATC60 SpectraGuard Access Point / Sensor User Manual SS 300AT C 60 UserMan Part1 2013 12 11 revised
AirTight Networks, Inc. SpectraGuard Access Point / Sensor SS 300AT C 60 UserMan Part1 2013 12 11 revised
Contents
- 1. Users Manual
- 2. Users Manual-1
- 3. Users Manual-2
- 4. Users Manual-3
- 5. Users Manual-4
- 6. Users Manual-5
- 7. Users Manual-6
- 8. (SS-300AT-C-60) UserMan-Part1_2013.12.11 revised
- 9. (SS-300AT-C-60) UserMan-Part2
- 10. (SS-300AT-C-60) UserMan-Part3
- 11. (SS-300AT-C-60) UserMan-Part4
- 12. (SS-300AT-C-60) UserMan-Part5
- 13. (SS-300AT-C-60) UserMan-Part6
(SS-300AT-C-60) UserMan-Part1_2013.12.11 revised
![User Guide SpectraGuard® Enterprise An AirTight® Product A Comprehensive Wireless IPS and Performance Management Solution Version 6.7 Update 2 AirTight® Networks, Inc., 339 N. Bernardo Avenue, # 200, Mountain View, CA 94043 http://www.airtightnetworks.com Product documentation is being enhanced continuously based on customer feedback. To obtain a latest copy of this document, visit http://www.airtightnetworks.com/home/support.html](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-1.png)
![This page has been intentionally left blank.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-2.png)
![SpectraGuard® Enterprise User Guide](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-3.png)
![1 END USER LICENSE AGREEMENT Please read the End User License Agreement before installing SpectraGuard® Enterprise. The End User License Agreement is available at the following location -.http://www.airtightnetworks.com/fileadmin/pdf/AirTight-EULA.pdf. Installing SpectraGuard® Enterprise constitutes your acceptance of the terms and conditions of the End User License Agreement. DISCLAIMER THE INFORMATION IN THIS GUIDE IS SUBJECT TO CHANGE WITHOUT ANY PRIOR NOTICE. AIRTIGHT® NETWORKS, INC. IS NOT LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT. THIS PRODUCT HAS THE CAPABILITY TO BLOCK WIRELESS TRANSMISSIONS FOR THE PURPOSE OF PROTECTING YOUR NETWORK FROM MALICIOUS WIRELESS ACTIVITY. BASED ON THE POLICY SETTINGS, YOU HAVE THE ABILITY TO SELECT WHICH WIRELESS TRANSMISSIONS ARE BLOCKED AND, THEREFORE, THE CAPABILITY TO BLOCK AN EXTERNAL WIRELESS TRANSMISSION. IF IMPROPERLY USED, YOUR USAGE OF THIS PRODUCT MAY VIOLATE US FCC PART 15 AND OTHER LAWS. BUYER ACKNOWLEDGES THE LEGAL RESTRICTIONS ON USAGE AND UNDERSTANDS AND WILL COMPLY WITH US FCC RESTRICTIONS AS WELL AS OTHER GOVERNMENT REGULATIONS. AIRTIGHT IS NOT RESPONSIBLE FOR ANY WIRELESS INTERFERENCE CAUSED BY YOUR USE OF THE PRODUCT. AIRTIGHT AND ITS AUTHORIZED RESELLERS OR DISTRIBUTORS WILL ASSUME NO LIABILITY FOR ANY DAMAGE OR VIOLATION OF GOVERNMENT REGULATIONS ARISING FROM YOUR USAGE OF THE PRODUCT, EXPECT AS EXPRESSLY DEFINED IN THE INDEMNITY SECTION OF THIS DOCUMENT. LIMITATION OF LIABILITY AirTight will not be liable to customer or any other party for any indirect, incidental, special, consequential, exemplary, or reliance damages arising out of or related to the use of SpectraGuard® Enterprise under any legal theory, including but not limited to lost profits, lost data, or business interruption, even if AirTight knows of or should have known of the possibility of such damages. Regardless of the cause of action or the form of action, AirTight’s total cumulative liability for actual damages arising out of or related to the use of SpectraGuard® Enterprise will not exceed the price paid for SpectraGuard® Enterprise. Copyright © 2003–2012 AirTight® Networks, Inc. All Rights Reserved. AirTight® Networks, The AirTight logo, and SpectraGuard® are registered trademarks of AirTight® Networks. All other products and services are trademarks, registered trademarks, and service marks or registered service marks of their respective owners. This product contains components from Open Source software. These components are governed by the terms and conditions of the GNU Public License. To read these terms and conditions visit http://www.gnu.org/copyleft/gpl.html. This product is protected by one or more of U.S. patent Nos. 7,002,943, 7,154,874, 7,216,365, 7,333,800, 7,333,481, 7,339,914, 7,406,320, 7,440,434, 7,447,184, 7,496,094, 7,536,723, 7,558,253, 7,710,933, 7,751,393, 7,764,648, 7,804,808, 7,856,209, 7,856,656, 7,970,894, 7,971,253, 8,032,939; Australian patent No. 200429804; U.K. patent No. 2410154, Japanese patent No. 4639195 and any others listed at www.airtightnetworks.com/patents. More patents pending.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-4.png)
![i FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT (Section 15.105) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. CAUTION (Section 15.21) Any changes or modifications not expressly approved by the guarantee of this device could void the user's authority to operate the equipment. Labeling requirements (Section 15.19) (a) (3) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is operation in 5.15 – 5.25GHz frequency range, then restricted in indoor use only, Outdoor operations in the 5150~5250MHz is prohibit. The availability of some specific channels and / or operational frequency bands are country dependent and are firmware programmed at factory to match the intended destination. The firmware setting is not accessible by the end user. This device is Master equipment, the transmission is disabled in the 5600-5650MHz band. Canada, Industry Canada (IC) Notices (RSS-Gen section 7.1.3) This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). Canada, avis d'Industry Canada (IC) Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement. Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC).](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-5.png)
![ii Utilisez l’appareil de sans fil de façon à minimiser les contacts humains lors du fonctionnement normal. Ce périphérique a également été évalué et démontré conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition à des appareils mobiles (antennes sont supérieures à 20 cm à partir du corps d'une personne). FCCNOTICE:TocomplywithFCCpart15rulesintheUnitedStates,thesystemmustbeprofessionallyinstalledtoensurecompliancewiththePart15certification.ItistheresponsibilityoftheoperatorandprofessionalinstallertoensurethatonlycertifiedsystemsaredeployedintheUnitedStates.Theuseofthesysteminanyothercombination(suchasco‐locatedantennastransmittingthesameinformation)isexpresslyforbidden.OnlytheantennaslistedbelowareallowedtobeusedwiththeEUToutputpower.AntennaList3TX 2TXNOTE:TherearetwodifferentEUToutputpowerforwithgroundplaneantennaandwithoutgroundplaneantenna.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. En vertu de la réglementation de l'industrie du Canada, cet émetteur de radio ne peuvent fonctionner en utilisant une antenne d'un type et maximum (ou moins) Gain approuvé pour l'émetteur par Industrie Canada. pour réduire risque d'interférence aux autres utilisateurs, le type d'antenne et son gain doivent être choisis de sorte que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour la réussite de communication.No.ManufacturerPartNo.PeakGainNote 1.JOYMAXJWX‐614XRSXX‐361JWX‐614XRSXX‐361JWX‐614XRSXX‐3613dBifor2.4GHz5dBifor5.15~5.25GHz5dBifor5.25~5.35GHz5dBifor5.47~5.725GHz5dBifor5.725~5.850GHzExternalAntenna(Dipole)2.MAG.LAYERSMSA‐3810‐2G4C1‐B4MSA‐3810‐2G4C1‐B3MSA‐3810‐2G4C1‐A374.14dBifor2.4GHz3.87dBifor5.15~5.25GHz3.87dBifor5.25~5.35GHz4.76dBifor5.47~5.725GHz5.72dBifor5.725~5.850GHzInternalAntenna(PIFA)No.ManufacturerPartNo.PeakGainNote 1.JOYMAXJWX‐614XRSXX‐361JWX‐614XRSXX‐3613dBifor2.4GHz5dBifor5.15~5.25GHz5dBifor5.25~5.35GHz5dBifor5.47~5.725GHz5dBifor5.725~5.850GHzExternalAntenna(Dipole)2.MAG.LAYERSMSA‐3810‐2G4C1‐A36MSA‐3810‐2G4C1‐A383.89dBifor2.4GHz2.64dBifor5.15~5.25GHz2.64dBifor5.25~5.35GHz1.38dBifor5.47~5.725GHz2.90dBifor5.725~5.850GHzInternalAntenna(PIFA)](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-6.png)
![Table Of Contents i Table Of Contents Getting Started ............................................................................................................................................................................... 1 Before You Begin ........................................................................................................................................................................ 1 Overview and Organization ..................................................................................................................................................... 1 License Based Features .............................................................................................................................................................. 1 How to get more information ................................................................................................................................................... 1 Contact Information .................................................................................................................................................................. 1 Navigation Bar and Global Functions ......................................................................................................................................... 2 A Quick Tour of the Console .................................................................................................................................................... 2 Navigation Bar ........................................................................................................................................................................... 2 Global Functions ........................................................................................................................................................................ 2 General .................................................................................................................................................................................... 2 Trees ......................................................................................................................................................................................... 2 Dialogs ..................................................................................................................................................................................... 3 Messages ................................................................................................................................................................................. 3 Behavior of SpectraGuard Enterprise Servers managed through SpectraGuard Manager ................................................. 4 Introduction ................................................................................................................................................................................ 4 Inheriting Policies on the Root location of SpectraGuard Enterprise Server ..................................................................... 4 Effect on inherited policies and templates on disassociation from SpectraGuard Manager ........................................... 4 Dashboard Tab ............................................................................................................................................................................... 5 Introduction: Panel Displaying WLAN Snapshot ................................................................................................................. 5 Dashboard Screen ...................................................................................................................................................................... 5 Dashboard: Location Tree ..................................................................................................................................................... 5 Security Dashboard: Sections ............................................................................................................................................... 6 Security Dashboard – Security Scorecard ....................................................................................................................... 6 Security Dashboard – New Events .................................................................................................................................. 8 Security Dashboard – Event Charts ................................................................................................................................. 9 Security Dashboard – Quarantine .................................................................................................................................. 10 Security Dashboard – Sensors ........................................................................................................................................ 12 Security Dashboard – APs .............................................................................................................................................. 13 Security Dashboard – Clients ......................................................................................................................................... 14 Performance Dashboard: Sections ..................................................................................................................................... 17 Performance Dashboard – Performance Summary ..................................................................................................... 17 Performance Dashboard – New Events ........................................................................................................................ 18 Performance Dashboard – Event Charts ....................................................................................................................... 19 Performance Dashboard – Trends ................................................................................................................................. 20 Performance Dashboard – Analysis .............................................................................................................................. 21 Dashboard Tab – User Saved Settings ............................................................................................................................... 23 Events Tab ..................................................................................................................................................................................... 24 Events: Panel Displaying Alerts ............................................................................................................................................. 24 Pagination of Events ............................................................................................................................................................ 24 Events Screen ............................................................................................................................................................................ 24 Events: Location Tree .......................................................................................................................................................... 25 Event Categories, Event Lists, and Table Summary ........................................................................................................ 25 Viewing Events Lists ............................................................................................................................................................... 26 Sorting Events........................................................................................................................................................................... 27 Filtering Events ........................................................................................................................................................................ 28 Working with Events ............................................................................................................................................................... 30 Events Context-Sensitive Menu ......................................................................................................................................... 30 Method for Opening Events Context-Sensitive Menu ................................................................................................ 30 Items in the Events Context-Sensitive Menu ................................................................................................................ 31](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-7.png)
![Table Of Contents ii Event Details Dialog ............................................................................................................................................................ 32 Acknowledging an Event ........................................................................................................................................................ 33 Deleting an Event ..................................................................................................................................................................... 33 Undeleting an Event ................................................................................................................................................................ 34 Toggling an Event’s Contribution to Network Vulnerability ............................................................................................ 34 Viewing Detailed Information for an Event ......................................................................................................................... 34 Tracking the Location of an Event ......................................................................................................................................... 35 Viewing Properties of Devices associated with an Event ................................................................................................... 37 Events Tab: User Saved Settings ............................................................................................................................................ 38 Devices Tab ................................................................................................................................................................................... 39 Devices: Panel Displaying WLAN Devices .......................................................................................................................... 39 Pagination of Devices .......................................................................................................................................................... 39 Devices Screen .......................................................................................................................................................................... 39 Devices: Location Tree......................................................................................................................................................... 40 Device Categories, Device Lists, and Table Summary .................................................................................................... 40 Viewing APs/Clients List ........................................................................................................................................................ 41 Viewing Sensors List ............................................................................................................................................................... 44 Viewing List of Networks Detected by Sensors ................................................................................................................... 45 Sorting a Device List ................................................................................................................................................................ 47 Location Tagging of a Device or Location Tag Assignment ............................................................................................... 48 Automatic Location Tagging (Auto Location Tagging) .................................................................................................. 48 Manual Location Tagging ................................................................................................................................................... 48 Working with Devices ............................................................................................................................................................. 48 AP Context-Sensitive Menu ................................................................................................................................................ 48 Method for Opening AP Context-Sensitive Menu ....................................................................................................... 49 Items in the AP Context-Sensitive Menu ...................................................................................................................... 50 AP Details Dialog ................................................................................................................................................................. 52 Fields in the AP Properties Tab ...................................................................................................................................... 53 Fields in the AP Events Tab ............................................................................................................................................ 57 Fields in the AP Performance Tab ................................................................................................................................. 58 Fields in the AP Troubleshoot Tab ................................................................................................................................ 59 Fields in the AP Locate Tab ............................................................................................................................................ 63 Filtering in APs ................................................................................................................................................................. 64 Client Context-Sensitive Menu .......................................................................................................................................... 66 Method for Opening Client Context-Sensitive Menu ................................................................................................. 66 Items in the Client Context-Sensitive Menu ................................................................................................................. 67 Client Details Dialog ............................................................................................................................................................ 68 Fields in the Client Properties Tab ................................................................................................................................. 69 Fields in the Client Events Tab ....................................................................................................................................... 73 Fields in the Client Performance Tab ............................................................................................................................ 74 Fields in the Client Troubleshoot Tab ........................................................................................................................... 75 Fields in the Client Locate Tab ....................................................................................................................................... 79 Filtering in Clients ............................................................................................................................................................ 80 Smart Device Detection ....................................................................................................................................................... 81 Manually tagging authorized clients as smart devices ............................................................................................... 81 Manually Tagging Guest clients as Smart Devices ...................................................................................................... 86 Removing the smart device tag from guest clients ...................................................................................................... 87 Changing the smart device type .................................................................................................................................... 88 Sensor Context-Sensitive Menu ......................................................................................................................................... 89 Method for Opening Sensor Menu ................................................................................................................................ 89 Items in the Sensor Context-Sensitive Menu ................................................................................................................ 90 Sensor Details Dialog ........................................................................................................................................................... 91 Fields in the Sensor Properties Tab ................................................................................................................................ 91](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-8.png)
![Table Of Contents iii Sensor Events Tab ............................................................................................................................................................ 95 Sensor Performance Tab .................................................................................................................................................. 96 Sensor Spectrum Tab ....................................................................................................................................................... 98 Sensor Troubleshoot Tab ................................................................................................................................................. 99 Filtering in Sensors ........................................................................................................................................................ 103 Network Details Dialog ..................................................................................................................................................... 104 APs tab............................................................................................................................................................................. 104 Changing the location of a network ................................................................................................................................ 106 Deleting a network from Networks Tab ......................................................................................................................... 107 Locating an AP/Client placed on the Floor Map ................................................................................................................ 108 Removing a Device from Quarantine .................................................................................................................................. 111 Moving an AP/Client to a Different Folder ........................................................................................................................ 111 Merging APs ........................................................................................................................................................................... 111 Splitting APs ........................................................................................................................................................................... 112 Devices Tab – User Saved Settings ...................................................................................................................................... 112 Locations Tab.............................................................................................................................................................................. 114 Locations: Panel for Creating Locations ............................................................................................................................. 114 Locations Screen ..................................................................................................................................................................... 114 Working with Location Folders and Location Nodes ....................................................................................................... 115 Adding a New Location .................................................................................................................................................... 115 Moving a Location ............................................................................................................................................................. 117 Renaming a Location ......................................................................................................................................................... 117 Deleting a Location ............................................................................................................................................................ 118 Working with Images ............................................................................................................................................................ 119 Attaching an Image ............................................................................................................................................................ 119 Zooming In/Zooming Out, Opacity Control, Resolution of an Image ........................................................................ 120 Placing Locations on a Location Folder with an Attached Image ............................................................................... 121 Detaching an Image ........................................................................................................................................................... 121 Importing a Planner file into a Location Node............................................................................................................... 122 Creating your Layout ............................................................................................................................................................ 122 Placing APs and Sensors on the Floor map and Viewing Details................................................................................ 123 Setting Coordinates and Deleting Devices from a Floor map ...................................................................................... 124 Resetting your Canvas....................................................................................................................................................... 124 Editing Floor Properties .................................................................................................................................................... 124 Tagging Locations .............................................................................................................................................................. 125 Adding Location Notes to a Floor Map ...................................................................................................................... 125 Editing Location Notes on a Floor Map ...................................................................................................................... 127 Hiding Location Notes shown on a Floor Map .......................................................................................................... 128 Displaying Hidden Location notes shown on a Floor Map ...................................................................................... 129 Deleting Location Notes from Floor Map ................................................................................................................... 130 Printable View ........................................................................................................................................................................ 131 Viewing RF Coverage Maps ................................................................................................................................................. 133 AP Coverage View ............................................................................................................................................................. 133 AP Channel View ............................................................................................................................................................... 134 AP Link Speed View .......................................................................................................................................................... 135 Sensor Coverage View ....................................................................................................................................................... 136 Calibrating RF Views ............................................................................................................................................................. 137 Reports Tab ................................................................................................................................................................................. 139 Reports: Panel for Generating Reports ................................................................................................................................ 139 Reports Screen ........................................................................................................................................................................ 139 Location Tree ...................................................................................................................................................................... 139 Report Panel ....................................................................................................................................................................... 139 List of Reports ................................................................................................................................................................. 140](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-9.png)
![Table Of Contents iv List of Sections ................................................................................................................................................................ 141 Managing Reports .................................................................................................................................................................. 142 Adding a Report ................................................................................................................................................................. 142 Editing a Report ................................................................................................................................................................. 146 Deleting a Report ............................................................................................................................................................... 146 Moving a Report ................................................................................................................................................................ 147 Working with Sections of a Report ...................................................................................................................................... 147 Adding a Section to a Report ............................................................................................................................................ 147 Editing a Section of a Report ............................................................................................................................................ 149 Deleting a Section of a Report .......................................................................................................................................... 149 Scheduling a Report ............................................................................................................................................................... 149 Setting a Report Schedule ................................................................................................................................................. 149 Editing a Report Schedule ................................................................................................................................................ 152 Canceling a Report Schedule ............................................................................................................................................ 152 Generating a Report Instantly .............................................................................................................................................. 152 Sample Report Generation .................................................................................................................................................... 154 Creating a Report ............................................................................................................................................................... 155 Adding a Section ................................................................................................................................................................ 155 Specifying a Section Query ............................................................................................................................................... 155 Saving the Section .............................................................................................................................................................. 155 Generating the Report ....................................................................................................................................................... 155 Forensics Tab .............................................................................................................................................................................. 159 Forensics: Panel for Threat Forensics .................................................................................................................................. 159 Forensics Screen ..................................................................................................................................................................... 159 Forensics: Location Tree .................................................................................................................................................... 159 Forensics: Time Filter, Threat List, and Pie charts ......................................................................................................... 159 Viewing Threats List .............................................................................................................................................................. 160 AP Based Threats ................................................................................................................................................................... 163 AP Based Threat – Association Tab ................................................................................................................................. 163 AP Based Threat – Prevention Tab .................................................................................................................................. 164 AP Based Threat – Admin Tab ......................................................................................................................................... 166 AP Based Threat – DoS ...................................................................................................................................................... 167 AP DoS Threat – Association tab ................................................................................................................................. 167 AP DoS Threat – Prevention tab .................................................................................................................................. 168 AP DoS Threat – Admin Tab ........................................................................................................................................ 168 Client Based Threats .............................................................................................................................................................. 169 Client Based Threat – Association Tab ............................................................................................................................ 170 Client Based Threat – Prevention Tab ............................................................................................................................. 171 Client Based Threat – Admin Tab .................................................................................................................................... 172 Client Based Threat – Ad hoc ........................................................................................................................................... 173 Client Ad hoc Threat – Association tab ....................................................................................................................... 174 Client Ad hoc Threat – Prevention tab ........................................................................................................................ 174 Client Ad hoc Threat – Admin Tab.............................................................................................................................. 175 Forensics Tab – User Saved Settings .................................................................................................................................... 176 Administration Tab ................................................................................................................................................................... 177 Introduction ............................................................................................................................................................................ 177 Administration Screen ........................................................................................................................................................... 177 Global Policies ........................................................................................................................................................................ 178 Event Settings ..................................................................................................................................................................... 178 Vulnerable SSID ............................................................................................................................................................. 178 Regeneration ....................................................................................................................................................................... 179 Hotspot SSIDs ..................................................................................................................................................................... 180 Device Settings ................................................................................................................................................................... 181](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-10.png)
![Table Of Contents v Smart Device Type ......................................................................................................................................................... 181 Import Devices ............................................................................................................................................................... 183 Thresholds ....................................................................................................................................................................... 186 Discovery ........................................................................................................................................................................ 187 Banned AP List ............................................................................................................................................................... 188 Banned Client List .......................................................................................................................................................... 189 User Management .............................................................................................................................................................. 190 Users ................................................................................................................................................................................ 190 LDAP Server Configuration ......................................................................................................................................... 197 RADIUS Server Configuration ..................................................................................................................................... 199 User Authentication ........................................................................................................................................................... 200 Password Policy ............................................................................................................................................................. 204 Account locking.............................................................................................................................................................. 204 User Preferences ............................................................................................................................................................. 205 Location Settings ................................................................................................................................................................ 206 Auto Location Tagging .................................................................................................................................................. 206 Location Tracking .......................................................................................................................................................... 207 Live RF Views ................................................................................................................................................................. 208 RF Propagation ............................................................................................................................................................... 209 System Settings ................................................................................................................................................................... 211 Encoding ......................................................................................................................................................................... 211 Reports............................................................................................................................................................................. 212 Auto-deletion .................................................................................................................................................................. 213 Vendors ........................................................................................................................................................................... 215 SMTP ............................................................................................................................................................................... 216 License ............................................................................................................................................................................. 217 Server ............................................................................................................................................................................... 218 Manage Logs ................................................................................................................................................................... 219 View logs ......................................................................................................................................................................... 220 Upgrade ........................................................................................................................................................................... 221 High Availability............................................................................................................................................................ 225 Login Configuration ...................................................................................................................................................... 227 Wizard ............................................................................................................................................................................. 229 SpectraGuard Manager Configuration ........................................................................................................................ 230 WLAN Integration ............................................................................................................................................................. 231 Aruba Mobility Controllers .......................................................................................................................................... 231 Cisco WLC ...................................................................................................................................................................... 234 Integration with Cisco WLSE ....................................................................................................................................... 238 HiveManager .................................................................................................................................................................. 240 HP MSM Controller ....................................................................................................................................................... 241 Meru................................................................................................................................................................................. 244 ESM Integration ................................................................................................................................................................. 245 ArcSight ESM Server ..................................................................................................................................................... 245 SNMP ............................................................................................................................................................................... 247 Syslog ............................................................................................................................................................................... 250 Integrating with Syslog servers .................................................................................................................................... 250 OPSEC ............................................................................................................................................................................. 252 SpectraGuard SAFE ........................................................................................................................................................... 253 Group Management ....................................................................................................................................................... 253 Adding a SAFE Group Manually ................................................................................................................................. 254 Attaching SAFE Policy to existing SAFE Group ........................................................................................................ 255 Editing a SAFE Group ................................................................................................................................................... 255 Viewing a SAFE Group Policy ..................................................................................................................................... 256](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-11.png)
![Table Of Contents vi Deleting a SAFE Group ................................................................................................................................................. 258 Settings ............................................................................................................................................................................ 258 Manage Clients ............................................................................................................................................................... 259 Local Policies .......................................................................................................................................................................... 263 Local Policies ...................................................................................................................................................................... 263 About Local Policies ...................................................................................................................................................... 263 Policy and Policy Groups .............................................................................................................................................. 264 Customizing v/s Inheriting Policies ............................................................................................................................. 264 Template Based Policies ................................................................................................................................................ 266 Template Availability at Sub-locations ....................................................................................................................... 266 Copying and Pasting of Local Policies ........................................................................................................................ 267 Copying and Pasting a Local Policy Group ................................................................................................................ 268 Wireless Policies-Authorized WLAN Setup ................................................................................................................... 269 Authorized WLAN Setup ............................................................................................................................................. 269 Operating Policies .............................................................................................................................................................. 276 AP auto-classification .................................................................................................................................................... 276 Client auto-classification ............................................................................................................................................... 277 Intrusion Prevention Policy .......................................................................................................................................... 279 Event Settings ..................................................................................................................................................................... 282 Configuration ................................................................................................................................................................. 282 Email Notification .......................................................................................................................................................... 285 Device Settings ................................................................................................................................................................... 286 SSID Profile ..................................................................................................................................................................... 287 Device Template ............................................................................................................................................................. 302 Location Properties ............................................................................................................................................................ 321 Event Activation ............................................................................................................................................................. 321 Intrusion Prevention Activation .................................................................................................................................. 321 Device List Locking ....................................................................................................................................................... 322 Appendix A1:SNMP Interface .................................................................................................................................................. 324 Appendix A2:Syslog Interface .................................................................................................................................................. 325 Glossary of Terms and Icons .................................................................................................................................................... 327 Acronyms ................................................................................................................................................................................ 327 Glossary of Terms .................................................................................................................................................................. 328 Glossary of Icons .................................................................................................................................................................... 330 Navigation Bar Icons ......................................................................................................................................................... 330 General Icons ...................................................................................................................................................................... 331 Dashboard Icons ................................................................................................................................................................. 331 Events Icons ........................................................................................................................................................................ 332 Devices Icons ...................................................................................................................................................................... 333 Locations Icons ................................................................................................................................................................... 337 Reports Icons ...................................................................................................................................................................... 338 Administration Icons ......................................................................................................................................................... 338](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-12.png)
![Getting Started SpectraGuard® Enterprise User Guide 1 Getting Started Before You Begin Thank you for purchasing SpectraGuard® Enterprise (referred to as ‘system’ hereafter in this document) from AirTight® Networks, Inc. The system assists you to effectively monitor, troubleshoot, administer, and protect your wireless network. Overview and Organization This user guide gives an overview of the User Interface (referred to as ‘Console’ hereafter in this document) and helps you familiarize with the following top-level tabs. This guide contains the following chapters. Navigation Bar and Global Functions: Provides an overview of the various tabs and buttons on the Console. Dashboard Tab: Provides wireless vulnerability assessment at-a-glance and displays key findings about your wireless deployment’s security. Events Tab: Lists various events generated by the system for your deployment. Devices Tab: Provides information on wireless devices such as Access Points (APs), Clients, Sensors, and Network Detectors (NDs) visible to the system. Locations Tab: Enables you to organize your office locations into a hierarchical tree and displays live RF maps for each location. Reports Tab: Enables you to view predefined reports and create customized reports. Forensic Tab: Enables you to drill down into the details about detected threats for further analysis of the causes and actions taken. Administration Tab: Enables you to view and set various policies for your deployment. License Based Features Note: If the following licenses are not applied, the user will not be able to view the corresponding features on the Console. The following features require separate licenses: 1. SpectraGuard SAFE 2. Forensics and Performance Monitoring (both covered under the same license) 3. Wireless Intrusion Detection System (WIDS) 4. Sensor / AP Combo The number of sensors that can be converted to AP's is based on your license. To view the exact number, go to Administration->Global->System Settings->Server on your server. How to get more information To receive important news on product updates, please visit our website at www.airtightnetworks.com Contact Information AirTight® Networks, Inc. 339 N, Bernardo Avenue, Suite #200 Mountain View, CA 94043 Tel: (650) 961-1111 Fax: (650) 963-3388 For technical support, send an email to support@airtightnetworks.com.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-13.png)
![Navigation Bar and Global Functions SpectraGuard® Enterprise User Guide 2 Navigation Bar and Global Functions A Quick Tour of the Console The Console consists of the following top-level tabs and additional buttons. This section explains how to use the Console navigation bar and global functions. Navigation Bar The Console navigation bar includes the following tabs: Dashboard, Events, Devices, Locations, Reports, Forensics, and Administration. Navigation Bar The following table describes the items in the navigation bar. Items in the Navigation Bar Item No. Item Description 1 Dashboard Provides a summary view of the WLAN environment 2 Events Lists various Events in the deployed WLAN environment 3 Devices Provides information on the wireless devices visible to the system 4 Locations Enables you to organize the network into a list of locations and displays live RF maps for each location node 5 Reports Enables you to generate various reports based on 802.11 data 6 Forensics Enables you to drill down into the details about detected threats for further analysis of the causes and actions taken 7 Administration Enables you to perform various administrative activities 8 Upgrade Available When displayed, alerts you that a newer version of the system is available 9 Troubleshooting in Progress When displayed, alerts you that a troubleshooting session is in progress 10 Current Date and Time Shows the current date and time in the format: Month Date, Hour: Minute AM/PM (Time Zone) 11 Refresh Refreshes all the panels globally 12 Help Shows the Help file for the system 13 Legend Describes the icons used in the system 14 About SpectraGuard Enterprise Shows product version, license information, details of the patents, and provides access to the license agreement 15 Log Off Logs out the current user and opens the Login screen Global Functions The Console contains several common functions that apply to the Dashboard, Events, Devices, Locations, Reports, Forensics, and Administration tabs. General The following functions apply to all screens in the system. On any screen, you can perform the following: Resize panes horizontally. Scroll only if there is data that overflows the screen. Edit some user-defined fields. Press the Tab or Enter key to save changes in dialogs. Trees The following functions apply to all trees in the system. In any tree, you can perform the following:](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-14.png)
![Navigation Bar and Global Functions SpectraGuard® Enterprise User Guide 3 Click to expand the sub nodes. Click to collapse the sub nodes. Double-click the node text to either expand or collapse sub nodes. Dialogs The following functions apply to all dialogs in the system. Depending on options available in a particular dialog, you can: Click OK to save all the changes and close the dialog. Click Cancel to discard the changes and close the dialog. Click Apply to save all changes and keep the dialog open. Click Delete to remove a selected item. Click Close to close the dialog. Click Restore Defaults to reset to factory defaults. Click to view more information. Some screens have more than one such icon. Click each of these icons in the relevant sections to view information depicted graphically. Messages The following functions apply to all message boxes in the system. The system divides messages into the following classes: 1. Confirmation: Signals an application level event that needs immediate user input. 2. Error: Signals an application level event, indicating failure of user performed action. 3. Warning: Signals an application level event that needs attention. 4. Information: Signals an informational event that may not need immediate action. For all informational messages, click the button to close the message. For all messages that require a Yes or No, you can: Click OK for Yes. Click Cancel for No.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-15.png)
![Behavior of SpectraGuard Enterprise Servers controlled through SpectraGuard Manager SpectraGuard® Enterprise User Guide 4 Behavior of SpectraGuard Enterprise Servers managed through SpectraGuard Manager Introduction The behavior of the SpectraGuard Enterprise servers that are managed through SpectraGuard Manager, is slightly different from the SpectraGuard Enterprise servers that are managed individually. Version 6.6 onwards, SpectraGuard Managed Network Console (SpectraGuard -MNC) has been renamed as SpectraGuard Manager. SpectraGuard Manager facilitates the centralized management of multiple SpectraGuard Enterprise servers, that could be placed at different locations of the enterprise. If you are not using SpectraGuard Manager to manage the SpectraGuard Enterprise servers in your enterprise, you can ignore this chapter. Inheriting Policies on the Root location of SpectraGuard Enterprise Server When the SpectraGuard Enterprise servers in your enterprise are managed through SpectraGuard Manager, SpectraGuard Manager pushes the local policies on to the Root location of each of the SpectraGuard Enterprise servers. The locations under Root location of the SpectraGuard Enterprise server are not affected in any way. When a SpectraGuard Enterprise server in the enterprise has been added to a group in SpectraGuard Manager, the SpectraGuard Manager pushes the local policies defined for that group, to the Root location of the SpectraGuard Enterprise server. Such policies are said to be inherited by the SpectraGuard Enterprise server from the SpectraGuard Manager. The inherited policies cannot be edited or deleted from the SpectraGuard Enterprise Console. Such policies can only be viewed and applied through the SpectraGuard Enterprise Console. Effect on inherited policies and templates on disassociation from SpectraGuard Manager The process of pushing the local policies to a SpectraGuard Enterprise server through SpectraGuard Manager can happen multiple times. In such cases, the most recently pushed policies would be implemented by or applied on the SpectraGuard Enterprise servers. The previously inherited local policies that are not in use, would be retained by the SpectraGuard Enterprise server. If a SpectraGuard Enterprise server disassociates itself from the SpectraGuard Manager managing it, the inherited policies and templates that are currently in use, are retained and used by the SpectraGuard Enterprise server. They can now be edited and deleted from the SpectraGuard Enterprise Console at the Root location, as they are independent of SpectraGuard Manager. This operation can be performed only by a superuser. The inherited policies and templates that are no longer in use, will automatically get deleted from SpectraGuard Enterprise.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-16.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 5 Dashboard Tab Introduction: Panel Displaying WLAN Snapshot The Dashboard screen enables you to view a snapshot of your WLAN security status and performance. The Security snapshot is provided in terms of overall security status, security events and charts, quarantine activity status and category-wise device summary. The Performance snapshot presents a summary of performance events based on severity, performance event charts, and latest trends in factors contributing to performance issues. Dashboard Screen The Dashboard appears by default when you log into the system. You can return to the Dashboard from other screens by clicking the Dashboard tab. The Dashboard screen includes two panes: On the left, the Location tree is seen. On the right, Selected Location shows the path for the location selected in the Location tree. Events On/Off and Prevention On/Off indicate whether Event Generation and Intrusion Prevention have been turned ON or OFF at a selected location. Clicking Events On/Off opens the Administration->Local->Location Properties->Event Activation screen. Clicking Prevention On/Off opens the Administration->Local->Location Properties->Intrusion Prevention Activation screen. Note: Prevention On/Off is not visible if WIDS license is applied. Security and Performance Dashboard depict a macro view and statistical information of your WLAN security and performance respectively. Security Dashboard Dashboard: Location Tree](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-17.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 6 The Location tree shows the complete list of locations created for your WLAN in the system. Vulnerability status icon before each location name shows the vulnerabilty status of that location. To view the Dashboard for a particular location, select the appropriate node in the Location tree. Security Dashboard: Sections Security Dashboard screen appears by default when you log into the system. Alternatively, click the Security tab on the Dashboard screen to view the Security Dashboard. The Security Dashboard consists of the following Information Widgets. Security Scorecard New Events Security Event Charts Quarantine Sensors APs Clients Security Dashboard – Security Scorecard The Security Scorecard shows the overall security status of the WLAN at the selected location. Security Dashboard – Security Scorecard Section Your WLAN can be in either of the following states: Secure: The selected location is treated as Secure if No security events are raised at that location and its child locations, or The Vulnerability checkbox has the following purpose (see Event Settings, Configuration). If the checkbox is checked, the event type in question will contribute to the security vulnerability check. To remove a particular instance of an event from the scorecard, the administrator can click <Remove from Scorecard> and uncheck the Participate from Vulnerability checkbox. Note that only that instance of the event will stop contributing to the scorecard. All other event instances of the said event type will continue to contribute to the vulnerability status. Vulnerable: The selected location is treated as vulnerable if any events, which contribute to vulnerability status, are raised. You can customize the list of events that cause the network to be vulnerable by changing the types of events that contribute to that status. Read/Unread/Acknowledge status of the events do not contribute to the Vulnerability status. Configuring Security Scorecard View](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-18.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 7 To specify the types of events that are considered when determining the Security Scorecard status at a particular location, select a location in the Location tree and then click the icon to open Administration->Local->Local Policies->Event Settings->Configuration screen with Security tab selected. Refer to the Event Settings, Configuration section in the Administration tab for more details. Check/Uncheck the Vulnerability field of the Security Event Types that you want to be considered/not considered for computation of the vulnerability status of a location. Note: Configuring Security Scorecard, New Events, Event Charts, Quarantine, Sensors, APs, and Clients sections are not visible if WIDS license is applied. Network Status: Tell Me More To view more information about the actual events that contributed to the Vulnerable or Secure status of a particular location, select a location in the Location tree and then click <Tell Me More> in the Security Scorecard. Based on the security status of the location, a dialog describing the reason for the security status appears as shown below. Secure Location Dialog appears when a location is Secure, whereas Vulnerable Location Dialog appears when the security state is Vulnerable. Secure Location Dialog Vulnerable Location Dialog If the location is vulnerable, the Vulnerable Location Dialog shows the actual events that occurred in your network which contributed to the Vulnerable status of the location. It is possible that you have taken action on the devices after an event displayed in this list occurred, to address the security vulnerability. In that case, you can select such an](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-19.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 8 event from the Vulnerable Location dialog and click <Remove from Scorecard> to remove it from the consideration for vulnerability status. The system shows the Remove from Scoreboard dialog which allows you take the removal action and add a comment to mark that action before removing it from set of events that contributed to vulnerability. Remove from Scoreboard Dialog Uncheck the Participate in Vulnerability Assessment check box and enter the text to acknowledge the event, so that the system does not consider this event occurrence in the future while computing the Vulnerable status. Security Dashboard – New Events New Events section lists the ten recent Security events in descending order of start time of the event. This list includes instantaneous as well as live/expired security events. The events are listed based on the Severity Level selected: High, Medium, Low, or All. Security Dashboard – New Events Section You can select an event row from this list and double-click to see the event details screen. Refer to the Viewing Events Lists section in the Events tab for more details. Select an event row and right click to open a context sensitive menu of actions that can be taken on that event. Refer to the Events Context-Sensitive Menu section in the Events tab for more details. Configuring New Events View](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-20.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 9 Clicking the icon in the New Events section takes you to Administration->Local->Local Policies->Event Settings->Configuration screen with Security tab selected. This allows you to change the settings of Event types to control which type security events are displayed at the current location. If you want to change an event configuration at some other location, then select that location in the Location tree and then click the icon. Security Dashboard – Event Charts The system shows two Event Charts on the Security Dashboard. The event drop-down list allows you to focus on security events (by location or category), or on APs/Wi-Fi Clients having security events. The time period drop-down list allows you to focus on the last 48 hours or a choice of interval in the last 24 hours. The availability of two charts on the Security Dashboard improves your ability to efficiently notice and handle security issues, if any. The details of the charts displayed based on the drop-down list are as follows: 1. The drop-down list of events or devices to show on the chart contains the following: By Location: Displays a bar chart with a count of Security events for the selected location and its immediate child locations (The selected location is marked with * in the legend of the chart). In order to jump to the security events at one of these locations, click on the bar for that location. You will be taken to the Events ->Security ->All screen for that location and that location will be selected in the location tree panel as well. By Category: Displays a bar chart with a count of Security events for each security event category at the current location. In order to jump to the security events of a specific category, click on the bar for that category. You will be taken to the Events->Security->Selected category screen. Top 5 APs by Events: Displays a bar chart for the top 5 APs based on the number of Security events. On clicking on any bar, the AP Details dialog for the corresponding AP device opens with the Events tab selected. This allows you to view all the events related to that AP and take appropriate actions. Top 5 Clients by Events: Displays a bar chart for the top 5 Clients based on the number of Security events. On clicking any bar, the Client Details dialog for the corresponding Client device opens with the Events tab selected. This allows you to view all the events related to that Client device and take appropriate actions. 2. The drop-down list for time period allows you to control the chart display based on security events that occurred in the chosen period. The time period choices available are: Last 4 Hours, Last 12 Hours, Last 24 Hours, or Last 48 Hours. Security Dashboard – Event Charts Configuring Security Dashboard – Event Charts View](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-21.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 10 Clicking the icon in the Event Charts section takes you to Administration->Local->Local Policies->Event Settings->Configuration screen with the Security tab selected. This allows you to change the settings of Event types to control which type security events are displayed at the current location. If you want to change event configuration at some other location, then select that location in the Location tree and then click the icon. Security Dashboard – Quarantine Based on the Intrusion Prevention Policy, the system can proactively block an AP or a Client and automatically protect the network against various wireless security threats. The Quarantine section of the Security Dashboard provides a summary of quarantine activities being carried out by the system. The Quarantine section shows a count of APs (for Merged APs the count of BSSIDs in quarantine are shown) and Clients that are being blocked, (that is, Quarantined), as well as a count of APs (for Merged APs the count of BSSIDs in quarantine are shown) and Clients that are identified to be quarantined, but the Quarantine action has not yet started ( that is, Quarantine Pending). Security Dashboard – Quarantine Section – Table View Viewing Quarantined Devices – Table View To view a list of APs and Clients with status Quarantine Active or Quarantine Pending, click the following hyperlinked text in the Quarantine section: AP Quarantine Active AP Quarantine Pending Client Quarantine Active Client Quarantine Pending](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-22.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 11 List of Quarantined APs and Clients Note: Viewing Quarantined Devices – Table/Pie Chart View section is not visible if WIDS license is applied. Viewing Quarantined Devices – Pie Chart View To view a list of APs and Clients with status Quarantined or Quarantine Pending in pie chart form, click the icon. Security Dashboard – Quarantine Section – Pie Chart View](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-23.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 12 Select Active, Pending, or both the checkboxes to control the pie chart contents. Click the area in the pie chart or on the names that are hyperlinked (appearing in the legends below the pie chart) to see all the quarantine sessions. Configuring Intrusion Prevention Policy Clicking on the in the Quarantine section of Security Dashboard opens the Administration->Local->Operating Policies->Intrusion Prevention screen. This allows you to edit the Intrusion Prevention Policy and the Intrusion Prevention Level for the selected location. If you want to change this policy for a different location, you can select that location in the Location tree and then click the icon. Refer to the Intrusion Prevention section in the Administration tab for more details. Security Dashboard – Sensors The Sensors section displays a count of Active and Inactive Sensors, Sensor-AP combo devices(Sensor/AP), and Network Detectors (ND). Security Dashboard – Sensors Section – Table View Viewing Sensors – Table View To view the details of the Sensor, Sensor/AP combo, or ND devices, click the following hyperlinked text in the Sensors section: Sensor Sensor/AP ND Viewing Sensors – Pie Chart View To view the Sensors information in pie chart form, click the icon.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-24.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 13 Security Dashboard – Sensors Section – Pie Chart View Select Active, Inactive, or both the checkboxes to view the active/inactive Sensors. Clicking on any area in the pie chart takes you to the DevicesSensors screen. Editing Sensor Configuration To access device Configuration editing functionality from the Dashboard, click the icon to open the Administration->Local->Local Policies->Device Template screen at the selected location. To edit the device configuration for another location, select that location in the Location tree and then click the icon. Refer to the Device Template section in the Administration tab for more details. Security Dashboard – APs The APs section enables you to view lists of all the Active and Inactive APs that belong to a certain category (Authorized, Mis-configured, Rogue, External). APs that do not belong to any category based on their wired status and AP classification policy are treated as Uncategorized. Security Dashboard – APs Section – Table View Entries are color coded according to their classification: Authorized is denoted by green color Mis-configured is denoted by orange color](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-25.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 14 Rogue is denoted by red color External is denoted by blue color Uncategorized is denoted by white color Viewing APs – Table View To view the AP information, click the following hyperlinked text in the APs section: Authorized: Click on Authorized, the Devices->APs->Categorized->Authorized screen opens. Mis-configured: Click on Mis-configured, the Devices->AP->Categorized->Authorized screen opens. Rogue: Click on Rogue, the Devices->APs->Categorized->Rogue screen opens. External: Click on External, the Devices->AP->Categorized->External screen opens. Uncategorized: Click on Uncategorized, the Devices->APs->Uncategorized screen opens Viewing APs – Pie Chart View To view the APs information in pie chart form, click the icon. Security Dashboard – APs Section – Pie Chart View Select Active,Inactive, or both the checkboxes to view the active/inactive APs. Click the area in the pie chart; the Devices->APs->Selected category screen opens. Editing AP Auto-classification Policy To edit the AP Auto-classification policy at selected location, click the icon to open the Administration->Local->Local Policies->Operating PoliciesAP Auto-classification screen. To edit the AP classification policy at another location, select that location in the Location tree and then click the icon. Refer to the AP Auto-classification section in the Administration tab for more details. Security Dashboard – Clients The Clients section enables you to view lists of all the Active and Inactive Clients that belong to a certain category (Authorized, Misbehaving, Rogue, External, Guest, and Uncategorized).Clients that do not belong to any category based on their association status and Client classification policy settings are classified as Uncategorized. The Clients section of Security Dashboard also shows you the Ad hoc networks seen in your environment.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-26.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 15 Security Dashboard – Clients Section – Table View Entries are color coded according to the specified classification policies: Authorized is denoted by green color Misbehaving is denoted by orange color Rogue is denoted by red color Guest is denoted by light green color External is denoted by blue color Uncategorized is denoted by white color The Ad hoc Networks sub-section in the Clients section displays all peer-to-peer wireless, that is, ad hoc connections between wireless devices in the network. Clients – Ad hoc Networks Section Viewing Clients – Table View To view the Client information, click the following hyperlinked text in the Clients section: Authorized: Click on Authorized, the Devices->Clients->Categorized->Authorized screen opens. Misbehaving: Click on Authorized, the Devices->Clients->Categorized->Authorized screen opens. Rogue: Click on Authorized, the Devices->Clients->Categorized->Rogue screen opens. Guest: Click on Authorized, the Devices->Clients->Categorized->Guest screen opens. External: Click on Authorized, the Devices->Clients->Categorized->External screen opens. Uncategorized: Click on Uncategorized, the Devices->Clients->Uncategorized screen opens. New Clients that do not belong to any category based on their association status and Client classification policy settings appear under Clients as Uncategorized Clients. The system cannot determine whether these Clients are authorized or unauthorized. You should manually inspect and move these Clients to the appropriate Client folder. BSSIDs: Click on BSSIDs, list of ad hoc networks and the details of the devices in these ad hoc networks screen appears.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-27.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 16 List of Ad hoc Connections Viewing Clients – Pie Chart View To view the Clients information in pie chart form, click the icon.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-28.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 17 Security Dashboard – Clients Section – Pie Chart View Select Active, Inactive, or both the checkboxes to view the active/inactive Clients. Click the area in the pie chart; the Devices->Clients->Selected category screen opens. Editing Client Auto-classification Policy To edit the Client Auto-classification policy at selected location, click the icon to open the Administration->Local->Local Policies->Operating Policies->Client Auto-classification screen. To edit the Client classification policy at another location, select that location in the Location tree and then click the icon. Refer to the Client Auto-classification section in the Administration tab for more details. Performance Dashboard: Sections The Performance Dashboard screen appears by clicking the Performance tab on the Dashboard screen. Performance Dashboard The Performance Dashboard screen consists of the following Information Widgets: Performance Summary New Events Performance Event Charts Trends Analysis Performance Dashboard – Performance Summary The Performance Summary displays the overall performance information of the Wi-Fi environment at selected location. This summary is presented as a pie chart of performance related events based on the Severity of these events.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-29.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 18 While keeping the mouse on an area of the pie chart shows you the number of events of the corresponding category, Clicking anywhere in the pie chart takes you to the Events->Performance tab screen showing future details of events at the selected location. Performance Dashboard – Performance Summary Section Configuring Performance Dashboard – Performance Summary View The events considered for showing the pie chart in Performance Summary are those which are selected for Display in the Event Settings at the selected location. In order to change the Event Settings at the selected location, click the icon. This will open the Performance tab of the Administration->Local->Local Policies->Event Settings->Configuration screen at the selected location where you can directly modify the Display settings of the performance events. Refer to the Event Settings, Configuration section in the Administration tab for more details. Note: Configuring Performance Summary, New Events, Events Chart, Trends, and Analysis sections are not visible if WIDS license is applied. Performance Dashboard – New Events The New Events section lists the ten recent Performance events in descending order of the start time of the event. This list includes instantaneous as well as live/expired performance events. The events are listed based on the Severity Level selected: High, Medium, Low, or All. Performance Dashboard – New Events Section](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-30.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 19 You can select an event row from this list and double-click to see the event details screen. Refer to the Viewing Events Lists section in the Events tab for more details. Select an event row and right click to open a context sensitive menu of actions that can be taken on that event. Refer to the Events Context-Sensitive Menu section in the Events tab for more details. Configuring Performance Dashboard – New Events View Select a location in the Location tree and then click the icon to open Administration->Local->Local Policies->Event Settings->Configuration screen with Performance tab selected. Performance Dashboard – Event Charts The system shows two Event Charts on the Performance Dashboard. The event drop-down list allows you to focus on events (by location or category), or on APs or Wi-Fi Clients experiencing performance issues. The time period drop-down list allows you to focus on the last 48 hours or a choice of interval in the last 24 hours. The availability of two charts on the Performance Dashboard improves your ability to efficiently notice and handle performance issues, if any. The details of the charts displayed based on the drop-down list are as follows: 1. The drop-down list of events or devices to show on the chart contains the following: By Location: Displays a bar chart for a count of performance events for the selected location and its immediate child locations. (The selected location is marked with * in the legend of the chart). In order to jump to the performance events at one of these locations, click on the bar for that location. You will be taken to the Events->Performance->All screen for that location and that location will be selected in the location tree panel as well. By Category: Displays a bar chart for a count of performance events at the selected location based on their category. In order to jump to the performance events of a specific category, click on the bar for that category. You will be taken to the Events->Performance->Selected category screen. Top 5 APs by Events: Displays bar graph for the top 5 APs based on the number of Performance events involving these APs. On clicking one of the bars, the AP Details dialog for the corresponding AP device opens with Events tab selected. This allows you to view all the events related to that AP and take appropriate actions. Top 5 Clients by Events: Displays bar graph for the top 5 Clients based on the number of Performance events involving these Clients. On clicking one of the bars, the Client Details dialog for the corresponding Client device opens with Events tab selected. This allows you to view all the events related to that Client device and take appropriate actions. 2. The drop-down list for time period allows you to control the chart display based on performance events that occurred in the chosen period. The time period choices available are: Last 4 Hours, Last 12 Hours, Last 24 Hours, or Last 48 Hours.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-31.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 20 Performance Dashboard – Event Charts Configuring Performance Dashboard – Event Charts View Select a location in the Location tree and then click the icon to open Administration->Local->Local Policies->Event Settings->Configuration screen with Performance tab selected. Performance Dashboard – Trends Trends section of the Performance Dashboard displays line charts based on the category of performance events at the selected location for a chosen period of time. The choices of time period for the chart display are: Last 4 hours, Last 12 hours, Last 24 hours, or Last 48 hours. These choices are available in the form of a drop-down list as shown in the figure below. Performance Dashboard – Trends Section Note: Live events could be counted in multiple time slots that overlap with the event time, whereas Instantaneous events are counted only in the time slot in which they occurred. Configuring Performance Dashboard – Trends View](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-32.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 21 To specify the types of performance events that should be shown in the Trends at the selected location, click the icon in the Trends section. This opens the Select Category dialog shown below. Select the categories to be displayed by clicking the checkbox next to it in the Select Category dialog and click OK. Trends – Select Category Performance Dashboard – Analysis Top and bottom wireless activity analysis at the selected location is shown here for APs, Clients, and Sensors. Sensor records various performance parameters in the wireless network and sends performance records to server periodically for aggregation/correlation. These recorded performance parameters are rendered as Performance Monitoring Graphs in the Device Details. The top/bottom analysis is provided based on the performance monitoring graphs described above. The rank of a device for any performance parameter is computed based on average value of that parameter over the selected time interval. Performance Dashboard – Analysis Section – Table View To view the Analysis information in form of a bar chart, click the icon.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-33.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 22 Performance Dashboard – Analysis Section – Bar Graph view Performance parameters are computed based on detections by a channel-rotating Sensor during the time it, samples a particular channel. Such sampled data is typically well representative of parameters which are averages (for example, average data rate), ratios (for example, utilization) or slow varying (for example, associated Clients, active APs, active Clients). For parameters which are absolute values (for example, traffic), the sampled data typically underestimates the actual value. Time interval of periodic data collection/sampling is 15 minutes. Details of various parameters in the Analysis section are provided below. Table 2 Device Type and dropdown available on the Analysis Section Device Type Dropdown Available Table columns Description For details APs Top/Bottom 5 by Associated Clients Name, MAC Address, SSID, Associations Refer to Fields in the AP Performance Tab section for details Click on the AP Names appearing in the Name column in the Table View or click the Bar Graph in the Bar Graph View, the AP Details screen opens with Performance tab selected Top/Bottom 5 by Data Rate Name, MAC Address, SSID, Data Rate Top/Bottom 5 by Average Traffic Name, MAC Address, SSID, Traffic Top/Bottom 5 by Utilization Name, MAC Address, SSID, Utilization Clients Top/Bottom 5 by Data Rate Name, Data Rate Refer to Fields in the Client Performance Tab section for details Click on the Client Names appearing in the Name column in the Table View or click the Bar Graph in the Bar Graph View, the Clients Details screen opens with Performance tab selected Top/Bottom 5 by Traffic Name, Traffic Sensors Top/Bottom 5 by Active APs Name, Channel Number, Bandwidth, APs Refer to Fields in the Sensor Performance Tab section for details Click on the Sensor Names appearing in the Name column in the Table View or click the Bar Graph in the Bar Graph View, the Sensor Details screen opens with Performance tab selected Top/Bottom 5 by Active Clients Name, Channel Number, Bandwidth, Clients Top/Bottom 5 by Interference Name, Channel Number, dBm](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-34.png)
![Dashboard Tab SpectraGuard® Enterprise User Guide 23 Dashboard Tab – User Saved Settings The following User choices made during browsing of Dashboard Tab are saved by the system: All the options that the user can select that is, Table/Pie chart, Time Filters, drop-down list, radio buttons, check boxes for all sections displayed on Performance and Security Dashboard These settings are saved on log out as well as movement to other tabs on the Console.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-35.png)
![Events Tab SpectraGuard® Enterprise User Guide 24 Events Tab Events: Panel Displaying Alerts The Events screen provides information about events generated by the system. The system classifies events into the following types: Security, System, and Performance. On this screen, you can view, filter, locate, acknowledge, mark as read or unread, and toggle the state of the event’s participation in vulnerability computation. The option of Event-Pagination is also present. Pagination of Events You can control the display of events on this screen by choosing to display all the events or display them one page at a time. The Events screen has a toolbar as shown in the figure below, to configure the Pagination. Toolbar for Configuring the Pagination of Events Click the icon, to go to the Previous Page from a Page in the Events screen. Click on the respective Page number of the Events List. Maximum five Page numbers are displayed. Click the icon, to go to the Next Page from a Page in the Events screen. Click the icon, to disable the Paging option. A Confirmation screen appears. Confirm turning off Pagination Click Yes to turn off the Pagination of Events. Click the icon, to Configure Page size of Events as shown in the figure. The Page Size value selected is the number of Events that will be displayed on every page in the Events screen. (Minimum: 25; Maximum: 100, Default: 25 Events per Page) Configure Events Page Size Screen Note: The Event Pagination feature will appear whenever the Events screen displays (for example, Tell me more from Dashboard, Events Tab, Events tab in Device Details, and so on.) The Graphs on the Events screen are based on all the events that have taken place and not on number of events displayed per page. Events Screen](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-36.png)
![Events Tab SpectraGuard® Enterprise User Guide 25 To open the Events screen, on the navigation bar, select the Events tab Events Screen The Events screen includes two panes: 1. On the left, the Location tree 2. On the right, the event tabs: All, Security, System, and Performance, event list for the selected category of events, and event charts in the Table Summary. Events: Location Tree The Location tree shows the complete list of locations created for your WLAN in the system. The Events shown on the right are for the currently selected location. To view a list of events for any other location, select that location in the Location tree, and select an event type in the right pane. A list of events of the selected category that have occurred at the selected location (and its child locations), appear in the list of events in the right pane. Event Categories, Event Lists, and Table Summary This pane shows: Path of the selected location List of events that have occurred at that location You can view the events at the selected location (and its child locations) based on their category. Tabs are provided for each category: All: Shows all events Security: Shows events that indicate security vulnerability or breach in your network System: Shows events that indicate system health Performance: Shows events that indicate wireless network performance problems You can view the following information for all the events on the bar charts under ‘Table Summary’.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-37.png)
![Events Tab SpectraGuard® Enterprise User Guide 26 Event Severity: High, Medium, or Low. The event rows are highlighted in red, orange, or yellow color based on the severity level being High, Medium, or Low respectively. Event Status: New, Read, or Acknowledged Activity Status: Live, Instantaneous, or Expired Viewing Events Lists You must view events in order to take corrective actions. Use the following steps to view an event list: 1. In the Location tree, select a location. 2. In the right pane, select a tab – All, Security, System, or Performance. Event list with following columns displays: Events Tab – Column Header ID: Specifies the unique identification number of the event. Severity Icon: Specifies the severity of an event as High denoted by icon, Medium denoted by icon, or Low denoted by icon respectively. Read Status Icon: Specifies if an event is new (that is, unread), read, or acknowledged, or a combination of these options. Activity Status Icon: Specifies if an event is live (in progress), is active and an activity has occurred since it was last read, or past (already occurred). The system follows a Live Event Architecture (LEA) where live or instantaneous events are used to classify events based on the duration of their occurrence as follows: Live: Have a valid start time stamp and are denoted by the icon. A live event indicates that the triggers that raised the event are operational or continue to exist. On expiration, a valid stop time stamp is assigned to it. One or more conditions can trigger the start and stop of a live event. For example, consider the event ‘Rogue AP is Live’. This event will have a start and stop time and therefore, it is easy to figure out that the Rogue AP is still operating. A live event designated by the icon indicates an event that has been updated, that is, some activity has occurred after the event has been read. Expired: Live events are marked as ‘Expired’ once the triggers that caused the events are no longer operational. For example, once a Rogue AP has been located and removed by the administrator and is no longer in operation, the event related to the Rogue AP is marked as ‘Expired’. Expired events are marked with the icon. Instantaneous: Instantaneous events are the events triggered based on a trigger that does not have continuity. These events are raised each time the trigger is detected by the system. These events are indicated by the icon. For example, ‘Change in the SSID of an Authorized AP’ or ‘Beacon with a large Contention Free Period (CFP) duration detected’. All offline events (events synchronized from a Sensor that has reconnected after operating in the Offline mode) are also treated as instantaneous events. Contribution to Vulnerability: Indicates if that event occurrence is considered for determining the network’s vulnerability status on the Security Dashboard. The icon denotes that the event does not contribute to vulnerability status and is secure. The icon denotes that the event contributes to vulnerability status and is vulnerable.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-38.png)
![Events Tab SpectraGuard® Enterprise User Guide 27 Type Icon: Indicates the type of the event – Security, System, or Performance. This column is visible only if you select the tab All in step 2. Location: Shows the probable location of the devices participating in the event when the event occurred. Event Details: Gives a short description of the event. Category: Specifies the event’s sub-category within a selected event type. This column is visible only if you select the tab All in step 2. Event Start Time: Shows the date and time when the event occurred. Event Stop Time: Shows the date and time when the event stopped. Configure Display Columns: Clicking on the Column Visibility icon opens a window showing the columns available for display and their current selection and display order. You can check/uncheck the checkbox next to the column name to select/deselect it from Event display. You can change the display order of a column by selecting the column name and moving it up/down with Up/Down buttons. Save the display settings by clicking Save button. Events Tab - Display Columns Screen Sorting Events The system enables you to sort events by columns, which helps you arrange information according to your requirements. Use the following steps to sort events: 1. In the Location tree, select a location. 2. Select an event type tab, for example, Security. 3. Optionally, to drill down further, select an event category tab, for example, Rogue AP. 4. To sort a column, click the column header, for example, Date. Note: When you sort the list for the first time, the system sorts it in the ascending order. Click a column header again to re-sort in descending order.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-39.png)
![Events Tab SpectraGuard® Enterprise User Guide 28 Sorted Events List Filtering Events To focus your attention to a subset of events based on a filtering criteria (such as events in a particular time period, or of particular category, and so on) system provides you with the capability to filter events. Use the following steps to filter events: 1. On the Events screen, click the icon to open the Filter Events dialog.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-40.png)
![Events Tab SpectraGuard® Enterprise User Guide 29 Filtering Events 2. In the Time Filter dialog, do one of the following: Under Events in select the following Events in last 5 Minutes, Events in last 1 Hour, Events in last 1 Day, orCustomize to choose a From and To Date as described below. Default: All Events. Select Customize under the drop-down menu in Events in and then choose either of the following: Under From Date, click the icon to specify a start date and time and then click OK. Under To Date, click the icon to specify an end date and time and then click OK. 3. Under Activity Status, select one or more of the following checkboxes: All Instantaneous Live Expired 4. Under Event Status, select one or more of the following checkboxes: All Read Unread Acknowledged 5. Under Severity Status, select one or more of the following checkboxes: All Low Medium High](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-41.png)
![Events Tab SpectraGuard® Enterprise User Guide 30 6. Select the checkbox, Event ID, to enter event IDs manually for searching data related to it. 7. Select the checkbox, Text Filter, to enter search text to select events containing the text in event details. 8. Select the checkbox, Causes Vulnerability?, to select those Events which have been selected to contribute to Vulnerability. 9. Select the checkbox, Show deleted events, to view deleted events. Event text appears as strikethrough when you select this checkbox. 10. To save and apply the event filtering criteria, click <OK>. When the filter is applied it is denoted by Filter On on the Console, if no filter is applied it is denoted by Filter Off on the Console. Working with Events Events occur when Sensors detect any unexpected change in the WLAN. The system classifies events into the following categories: Security events (for example, Rogue APs and Denial of Service (DoS) attacks) System events (for example, Sensor connection/disconnection, Server status, or Troubleshooting) Performance events( for example Bandwidth, Configuration, Coverage, or Interference) Events Context-Sensitive Menu Context-sensitive menus for Events enable you to: View event details Locate an event Acknowledge an event Forensics Change the location of an event Delete or undelete an event Mark an event as Unread Read Toggle Vulnerability Method for Opening Events Context-Sensitive Menu To open the Events context-sensitive menu, click the Events tab and then right-click an event row to open the context-sensitive menu.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-42.png)
![Events Tab SpectraGuard® Enterprise User Guide 31 Events Context-Sensitive Menu Items in the Events Context-Sensitive Menu The Events context-sensitive menu includes the following items. Details: Opens the Events Details dialog explained in the Event Details Dialog section. This option is unavailable if you select multiple events. Locate: Opens the Locate Event dialog explained in the Tracking the Location of an Event section and enables you to track the location of an event by tracking the location of devices involved in that event. Acknowledge: Enables you to add comments to an event. These comments serve as a record of actions taken / to be taken in response to an event. Forensics: Opens the Forensics Details dialog explained in the Viewing Threats List section. This menu option is available for Security events (such as Rogue AP, Mis-configured AP, Honeypot AP, DoS, Banned AP, Unauthorized Association, Mis-association, Bridging Client, Banned Client, and Ad hoc Networks). Change Location: Opens the Location Tag dialog that enables you to: View the complete list of locations Change the location of the selected event Delete: Enables you to delete an event. AirTight recommends that you delete an event only after you have taken the recommended action for that event. Undelete: Available only if one or more events are deleted and you have checked Show deleted events check box discussed in the Filtering Events, this option enables you to un-delete event(s). Mark as Unread: Available only if an event is read; this option enables you to mark an event as a new event. Mark as Read: Enables you to mark a new event as read. Toggle Vulnerability: Enables you select/deselect a checkbox to specify whether this specific event instance should be considered / not considered for computing the vulnerability status of the network.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-43.png)
![Events Tab SpectraGuard® Enterprise User Guide 32 Event Details Dialog To open the Events Details dialog, on the Events screen, double-click an event row. Events Details Dialog The Events Details dialog gives information about the selected event, which helps you determine the appropriate response. The various fields and buttons in this dialog are: Short Description: Provides a brief description of the event. This is presented as bold text at the top of the dialog. Event Detailed Description: Gives a detailed description of the event. Location: Displays the name of the location where the event occurred. Severity: Displays the severity level of the event. Start-Time: Shows the date and time when the event started. End-Time: Shows the date and time (only for expired events) when the event ended. Is Vulnerable: Indicates if the event contributes to the vulnerability status of the network. Under Sub Events column, you can view a list of activities or sub-events associated with the event. The sub events display historic data that varies over time. For example, consider a past event “Rogue AP is Active”; this event contains an AP’s classification (category) as time varying data. To capture this change in classification, the event will have sub-events such as: Event started Classification of AP changed to Rogue](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-44.png)
![Events Tab SpectraGuard® Enterprise User Guide 33 AP has become inactive Event expired Under Updated Date/Time column, you can view the date and time of generation of the sub-event. Participating Devices: Displays the following information for each device involved in the sub-event: Icon Name MAC address Current Location Button (to see the current location of the device involved in the sub-event) Event Time Location Button (to see the location of the device at the time of occurrence of the sub-event) Under Recommended Action tab, the system displays the recommended action that you can take in response to the event Under Acknowledgement Trail tab: Add Comments: Enables you to type acknowledgement notes for the event and acknowledge the event. Acknowledgement Notes Trail: Provides a history of acknowledgement notes. Click Delete to delete the event after confirmation. Acknowledging an Event Acknowledge an event so that you can refer to these notes in future. Use the following steps to acknowledge an event: 1. On the Events screen, right-click an event row. 2. From the resulting menu, select Acknowledge. Event Acknowledgement Dialog 3. In the Enter Comment dialog, under Enter Comment, enter informative text. 4. To save the text click <OK>. Note: An administrator can read, select, and add comments (acknowledgment notes) for multiple events. Deleting an Event When you delete an event manually, the system does not remove it from the system but only marks it as deleted. A deleted event does not contribute to the vulnerability status for a location. Deleted events are also visible in a report. Permanent deletion of events from the database happens only automatically based on the configured auto-deletion policy for events (see Auto Deletion). Use the following steps to delete an event: 1. On the Events screen, right-click an event row.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-45.png)
![Events Tab SpectraGuard® Enterprise User Guide 34 2. From the resulting menu, select Delete. 3. In the Confirm dialog, click <Yes> to delete the event. If you have selected the Show deleted events checkbox on the Filter Events dialog, the text for this deleted event row appears as strikethrough. Recommended: AirTight recommends that you delete an event only after you view it and have taken the necessary action. Undeleting an Event Use the following steps to undelete an event: 1. On the Events screen, right-click an event row that is deleted. The text for this deleted event row appears as strikethrough. 2. From the resulting menu, select Undelete. Toggling an Event’s Contribution to Network Vulnerability As part of system configuration you would have identified certain event types as contributing to vulnerability by checking the Vulnerable flag in the event configuration. For details refer to Event Settings, Configuration section in Admin tab. Whenever events of these types occur, they contribute to the vulnerable status of the network. After taking action on these event occurrences, you can change the vulnerability status of such event occurrences from the Event Screen. Use the following steps to toggle the vulnerability of an event: 1. On the Events screen, right-click an event row. 2. From the resulting menu, select Toggle Vulnerability. Toggling Event Vulnerability 3. In the Enter Comment, select/deselect the checkbox Participate in Vulnerability Assessment. 4. In the space provided below the checkbox, enter informative text describing the reason for changing. 5. To save the changes, click OK. Viewing Detailed Information for an Event You can view more information about an event to understand its cause and effect. Use the following steps to view additional information for an event: 1. On the Events screen, double-click an event row. 2. On the Event Details dialog that appears, click the icon. A dialog that shows more information for that event type appears.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-46.png)
![Events Tab SpectraGuard® Enterprise User Guide 35 Viewing Additional Information about an Event Tracking the Location of an Event You can track the location of an event by tracking the location of each participating AP, Client, or attacker device. Use the following steps to track the location of an event:](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-47.png)
![Events Tab SpectraGuard® Enterprise User Guide 36 1. On the Events screen, right-click an event row and then from the resulting menu, select Locate. This opens the Event Details dialog as shown below: Tracking the Location of an Event 2. On the Event Details dialog, perform the following: Under Sub Events, select a sub-event Under Participating Devices, select a device participating in the selected sub-event Click <Current Location> to view the current location of the device. The Device Details dialog opens with Locate tab selected providing the details of the location (see Device Details). Click <Event Time Location> to view the location of the device at the time of occurrence of the sub-event as shown in the figure.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-48.png)
![Events Tab SpectraGuard® Enterprise User Guide 37 Event Time Location dialog Viewing Properties of Devices associated with an Event To view/edit the properties of an AP, Client, or Sensor associated with an event use the following steps to access the corresponding device menu: 1. On the Events screen, double-click an event row. 2. On the Event Details dialog, under Participating Devices, right-click a device row and select Details from the resulting menu. The right-click options are same as that of Device Details dialog. For more details refer to the Devices Tab section.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-49.png)
![Events Tab SpectraGuard® Enterprise User Guide 38 Viewing Device Properties from Events Details Dialog Events Tab: User Saved Settings The following User choices made during browsing of Events Tab are saved by the system. Display Columns and their order Events Filter Page Size These settings are saved on log out as well as movement to other tabs on the Console.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-50.png)
![Devices Tab SpectraGuard® Enterprise User Guide 39 Devices Tab Devices: Panel Displaying WLAN Devices The Devices screen provides information about APs, clients, sensors, sensor/AP combos, and networks visible to the system. On this screen, you can view/edit their details, sort the display based on their properties, carry out a variety of operations, like changing their location, changing their classification, initiating quarantine activities, and troubleshooting an AP, a Client, a Sensor or a Sensor/AP Combo. Pagination of Devices You can control the display of devices on this screen by choosing to display all the devices or display them one page at a time. The Devices screen has a new toolbar as shown in the figure below, to configure the Pagination. Toolbar for Configuring the Pagination of Devices Click the icon, to go to the Previous Page from a Page in the Devices screen. Click on the respective Page number of the Devices List. Maximum five Page numbers are displayed. Click the icon, to go to the Next Page from a Page in the Devices screen. Click the icon, to disable the Paging option. A Confirmation screen appears. Confirm turning off Pagination Click Yes to turn off the Pagination of Devices. Click the icon, to Configure Page size of Devices as shown in the figure. The Page Size value selected is the number of Devices that will be displayed on every page in the Devices screen. (Minimum: 25; Maximum: 100, Default: 25 Events per Page) Configure Devices Page Size Screen Note: The Device Pagination feature will appear whenever the Devices screen is displayed (for example, Manage SAFE Clients screen in Administration tab, and so on.) Devices Screen](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-51.png)
![Devices Tab SpectraGuard® Enterprise User Guide 40 To open the Devices screen, on the navigation bar, select the Devices tab Devices Screen The Devices screen includes two panes: On the left, the Location tree. On the right, device category tabs, device lists, and table summary. Devices: Location Tree The Location tree shows the complete list of locations for your WLAN in the system. The devices at the selected location are shown in the pane on right. You can choose a Device type (APs, clients, sensors or networks) and category within the device type tab to see a list of devices of chosen category. Device Categories, Device Lists, and Table Summary The right pane of the Devices screen shows a list of devices tagged to the selected location. Tabbed views enable you to view device lists for Uncategorized and Categorized APs and Clients, a list of all the Sensors and a list of networks detected by SGE sensors. The Table Summary displays information about APs, Clients, Sensors, and networks in the network. APs Chart Name Uncategorized APs Categorized APs Display Information Potential Classification Yes Potentially Authorized Potentially Rogue Potentially External Indeterminate Category Yes Authorized](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-52.png)
![Devices Tab SpectraGuard® Enterprise User Guide 41 Mis-configured Rogue External Network Connectivity Yes Networked Non-Networked Indeterminate Active Status Yes Active Inactive 802.11 Protocol (with or without 802.11n capability) Yes Yes a b only b/g a/b/g Other Security Settings Yes Yes 802.11i Wi-Fi Protected Access (WPA) Wired Equivalent Privacy (WEP) Open Multi Unknown Note: The system labels APs that are imported and whose protocol information is not available as Other. Clients Chart Name Uncategorized Clients Categorized Clients Display Information Active Status Yes Yes Active Inactive Category Yes Authorized Misbehaving External Guest Rogue Quarantine Status Yes Quarantined Not Quarantined SAFE Status Yes Yes Active Inactive Not Installed Sensors Chart Name Display Information Sensor Type Sensor Sensor/AP Combo ND Active Status Active Inactive Networks Chart Name Display Information Monitored Status Monitored(Yes) Not Monitored(No) Viewing APs/Clients List Use the following steps to open a APs/Clients list: 1. In the Location tree, select a location.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-53.png)
![Devices Tab SpectraGuard® Enterprise User Guide 42 2. On the right, a list of APs/Clients tagged to that location appears; select either the APs or Clients tab. 3. On the header, next to the Search icon, select the Include Inactive APs/Clients check box to view the inactive APs/Clients in the list. 4. Select either the Uncategorized or Categorized tab under APs or Clients to organize devices. For Categorized APs, select one of these tabs: All, Authorized, Rogue, or External. For CategorizedClients All, Authorized, Rogue, Guest, or External Categorized APs List The Devices screen shows the following information about APs or Clients. Expand/Collapse Column: Appears only for Merged or APs with multiple BSSIDs. The Expanded view shows list of individual BSSIDs with primary AP at the top. Note: The Expand/Collapse Column appears only in the APsCategorizedAll and Authorized screens. Device Type and Status Icon: Identifies the type of AP – Rogue, External, Authorized, Indeterminate, Multiple Radio or the type of Client – Authorized or Rogue/Guest/External (Non-authorized). Additionally, this icon specifies the status of APs/Clients as – Active/Inactive. Networked Status Icon: Identifies if the AP is connected to the wired network. This column is not present for Clients. Quarantine Status Icon: Identifies the quarantine status of the AP or Client – Quarantined, Quarantine Pending, or Not in Quarantine. Quarantining an AP or Client utilizes the Sensor’s computation resources. If no Sensor is currently available to quarantine the AP or Client, this icon shows Quarantine Pending. RSSI: Displays the observed RSSI (Received Signal Strength Indicator) value for the AP or Client. Banned Device Icon: Identifies if the AP or Client is in the Banned AP List or Banned Client List.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-54.png)
![Devices Tab SpectraGuard® Enterprise User Guide 43 Troubleshooting Status Icon: Identifies whether troubleshooting is in progress on the specified AP or Client, or both. SpectraGuard Security Agent For Endpoints (SAFE) Status Icon: Identifies the SAFE installation status – Installed-Active, Installed-Inactive, or Not Installed. SAFE Risk Level Icon: Identifies the SAFE risk level – High, Medium, or Low. Smart Device Icon: Identifies the smart device, that is whether the device is an approved smart device or unapproved smart device. Name: Specifies the user-defined name for the AP or Client. If SAFE is installed then the hostname of the Client is displayed. MAC Address: Specifies the unique 48-bit IEEE format address of the AP or Client assigned to the network adapter by the manufacturer. Security: Shows the security settings for the AP, such as Open, WEP, WPA, 802.11i, or Unknown. Encryption: Specifies the encryption used for unicast communication between the AP and a Client. MFP/11w: Indicates if the AP implements pre-802.11w standard from Cisco or 802.11w standard, to mitigate against the DoS attacks against AP. Authentication: Specifies the procedure used by APs to verify the identity of a Client. SSID: For an AP, it specifies the operating SSID, which is the unique identity that prospective Clients use to recognize the network. When several WLANs operate in the same space, SSID helps Clients in deciding which one to join. However, SSID alone does not provide any meaningful security. For a Client, it specifies the operating SSID of the AP with which the Client is associated. Channel: Specifies the channel number on which the AP or Client operates. The channel is shown as Dual for an AP or Client that operates on both 802.11a and 802.11b/g simultaneously. Protocol: For an AP, it specifies the 802.11 protocol used – 802.11a, 802.11b only, 802.11b/g, or 802.11a/b/g, with or without 802.11n capability. For a Client, it specifies the 802.11 protocol (with or without 802.11 n capability) used by the AP with which the Client is associated. Vendor: Specifies the name of the AP or Client manufacturer. The vendor name is inferred from the first three bytes of the MAC address. Network: Shows the Network Tag of the network to which the AP is connected. This value is blank if the AP is not connected to a network. Location: Gives the user-defined location name of the AP or Client. Up/Down Since: Specifies the date and time since the AP or Client is up or down. # Associated Clients: Specifies the number of Clients associated to the AP. Group: Displays the SAFE group to which the Client belongs. It denotes the group assigned to the SAFE Client. Associated AP: Specifies the name of the AP with which a Client is associated. This is the AP through which the Client communicates with other Clients and other networked devices. Cell ID: Specifies an ID for Clients in ad hoc mode. The Cell ID is common for all the Clients that form a single ad hoc connection. Smart Device Type Name: Specifies the type of smart device First Detected At: Specifies the date and time when the AP/Client was first detected by the system. Configure Display Columns: Clicking on the Column Visibility icon opens a window showing the columns available for display and their current selection and display order. You can check/uncheck the checkbox next to the column name to select/deselect it from Device display. You can change the display order of a column by selecting the column name and moving it up or down with Up/Down buttons. Save the display settings by clicking the Save button.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-55.png)
![Devices Tab SpectraGuard® Enterprise User Guide 44 Devices Tab – Display Columns Screen Note: The columns Network Status Icon, Security, Encryption, 11w/MFP, Authentication, Channel, Network, and Associated Clients appear only in the APs list. SAFE Status Icon, SAFE Risk Level Icon, Group, Associated AP, and Cell ID appear only in the Clients list. Viewing Sensors List Use the following steps to open a Sensors list. 1. In the Location tree, select a location. 2. On the right, a list of devices tagged to that location appears; select the Sensors tab.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-56.png)
![Devices Tab SpectraGuard® Enterprise User Guide 45 Sensors List The Devices screen shows the following information about Sensors: Device Type and Status Icon: Identifies the type of Sensor – Sensor, Sensor/AP combo, ND, and its status – Active, Inactive, Upgrade Required, or Upgrade in Progress. Troubleshooting Status Icon: Identifies if troubleshooting is in progress on the specified Sensor. Name: Specifies the user-defined name for the Sensor. MAC Address: Specifies the unique 48-bit IEEE format address of the Sensor assigned to the network adapter by the manufacturer. IP Address: Specifies the IP Address of the Sensor. Capability: Specifies if the Sensor has 802.11n capability. Also specifies if the sensor is Sensor/AP combo. The text AP indicates that the sensor/AP combo device has AP mode enabled. Model: Specifies the model number of the Sensor Location: Gives the user-defined location name of the Sensor. Template: Specifies the Configuration template assigned to the Sensor. Build: Specifies the build number of the software running on the Sensor. Up/Down Since: Specifies the date and time since the Sensor is up/down. # Monitored VLANs: Specifies the number of VLANs monitored by the ND. AP Mode:Specifies whether the AP mode is enabled or disabled. AP Template:Specifies the AP template being used by the Sensor/AP combo. Note: The default mode for Sensor/AP Combo device is the Sensor mode. Viewing List of Networks Detected by Sensors Use the following steps to view the list of networks detected by sensors 1. In the Location tree, select a location.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-57.png)
![Devices Tab SpectraGuard® Enterprise User Guide 46 2. On the right, a list of devices, and networks tagged to that location appears; select the Networks tab. The following figure displays the Networks tab. Networks tab The Networks tab shows the following information about the networks detected by the SGE sensors Monitored Status:specifies whether the network is monitored or unmonitored by SGE sensor. The icon indicates that the network is monitored. The icon indicates that the network is unmonitored. This field is not editable. Name: specifies the network name of the network, by default. This is an editable field and can be changed by the user. Network address: specifies the network address of the network. Location: specifies the location of the network. Monitoring sensor: specifies the sensor name of the sensor that has detected this network. Gateway MAC: specifies the MAC address of the gateway. This field cannot be deselected. Exposed since: specifies the date and time of exposure. This field is populated if the network is not being monitored. The date and time when monitoring for the network has stopped, is displayed in this field. You may configure display columns to view the columns that you want to view. For this, click on the Column Visibility icon. The following window showing the columns available for display and their current selection and display order, is opened.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-58.png)
![Devices Tab SpectraGuard® Enterprise User Guide 47 Configure display column list for Networks Tab You can select/deselect the checkbox next to the column name to view/remove it from Device display. You can change the display order of a column by selecting the column name and moving it up or down with Up/Down buttons. Save the display settings by clicking the Save button. Sorting a Device List The system enables you to sort a device list so that you can arrange information according to your requirements. Use the following steps to sort a device list: 1. Open a device list as explained in the Viewing APs/Clients List section. 2. Click a column header to sort the list.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-59.png)
![Devices Tab SpectraGuard® Enterprise User Guide 48 Sorted Device List Location Tagging of a Device or Location Tag Assignment Device location tagging refers to the process by which a device obtains the label of a location. Tagging is of two types: Automatic and Manual. Automatic Location Tagging (Auto Location Tagging) The system automatically assigns a location to a device depending on the Automatic Location Tagging policy selected and the signal strength of the Sensors reporting the device (see Auto Location Tagging). Automatic Location Tagging of a device depends on the location of the Sensors which are able to see the device. If all the Sensors reporting a device are tagged to the Unknown location, the device is also tagged to the Unknown location. Manual Location Tagging You can change the location tag of a device manually in one of the following ways: On the Devices screen, right-click the device row and select Change Location. On the Locations screen, place the Authorized AP on the floor map. On the AdministrationGlobal tabDevice SettingsImport Devices screen, specify the location to which the device must be tagged. If an AP or Client is manually tagged, the system never attempts to auto-tag it again. To re-enable auto-tagging for that device, you must delete the device and let the system re-discover it. Working with Devices This section shows how to access various context-sensitive menus and dialogs associated with the devices in your network. AP Context-Sensitive Menu](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-60.png)
![Devices Tab SpectraGuard® Enterprise User Guide 49 APs are wireless devices to which wireless Clients (laptops, PDAs, and so on) connect and communicate with other devices on the Local Area Network (LAN). The context-sensitive menu for APs enables you to: View AP Details Events involving the AP AP Performance Charts Edit an AP’s details Locate an AP Block Wired Port of an AP DoS Prevention of an AP Quarantine an AP Enable/disable Auto-quarantine on an AP Troubleshoot an AP Mark an AP as Known Delete an AP Change AP Location Category Move an AP to the following folder Authorized Rogue External Method for Opening AP Context-Sensitive Menu To open an AP context-sensitive menu, click the Devices tab and then right-click an AP row to open the context-sensitive menu.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-61.png)
![Devices Tab SpectraGuard® Enterprise User Guide 50 AP Context-Sensitive Menu on Devices Screen Items in the AP Context-Sensitive Menu The AP context-sensitive menus include the following items. Details:Opens the Properties tab of the AP Device dialog, which allows you to: View/Edit the AP’s name View/Edit AP’s classification View/Edit AP’s Device Tag Assign a user-defined location tag so that you can easily locate the AP; the location of a manually tagged AP is shown with an asterisk (*) under the Location column Enables you to view Primary details of the AP Devices seeing the AP and recently associated Clients. Performance: Opens the Performance tab of the AP Device dialog, which allows you to view performance graphs for the AP. Events: Opens the Events tab of the AP Device dialog, which allows you to view events associated with the AP, so that you can take the necessary actions. Locate: Opens the Locate tab of the AP Device dialog, which allows you view the AP Location (see Fields in the AP Locate Tab). Block Wired Port: Enables you to disconnect the AP from the network by blocking the wired side Ethernet port to which the AP is connected using integrated Cisco WLSE APIs. Mark Port as Unblocked: Available only if the wired port of the AP is Blocked, this option enables you to connect the AP to the network by unblocking the wired side Ethernet port to which the AP is connected using integrated Cisco WLSE APIs. Move to Quarantine: Enables you to block any wireless communication to the AP, that is, quarantine the AP.](https://usermanual.wiki/Arista-Networks/SS300ATC60.SS-300AT-C-60-UserMan-Part1-2013-12-11-revised/User-Guide-2140655-Page-62.png)