ArialPhone AP100BS Cordless Earset Basestation User Manual Exposure

ArialPhone L.L.C. Cordless Earset Basestation Exposure

Users manual

Last date revised: TUESDAY, MAY 15, 2001 page 1 of 1 ArialPhone User Guide TABLE OF CONTENTS GETTING STARTED FIRST THINGS FIRST Overview: Introduction to ArialPhone 00 Requirements for using ArialVoice software 00 Overview: opening the box, parts list 00 ARIALPHONE HARDWARE Identifying ArialPhone components 00 Assembling the phone hardware 00 n Charging the batteries 00 n Assembling the earset 00 n Assembling the headset 00 ARIALVOICE SOFTWARE INSTALLATION Running the installation program 00 n Selecting an address book 00 n Specifying confirmation options 00 n Specifying dialing options 00 UP AND RUNNING Customizing ArialPhone for multiple users 00 Interpreting ArialPhone tones 00 Specifying ArialVoice settings 00 Recharging and replacing the batteries 00 Tips for ArialPhone performance 00 MANAGING YOUR PHONE BOOK Overview: Voice recognition technology 00 Overview: How ArialPhone uses the Outlook/Windows address book 00 Adding an entry to your address book 00 Improving the accuracy of voice recognition 00 Updating your address book 00
Last date revised: TUESDAY, MAY 15, 2001 page 2 of 2 ANSWERING CALLS WITH ARIALPHONE Overview: How ArialPhone alerts you to incoming calls 00 Placing a call on hold 00 Using call waiting 00 Ending a call 00 PLACING A CALL Overview: How ArialPhone responds to your commands 00 Calling by name or location 00 Calling by telephone number 00 Navigating a phone tree 00 Placing a 3-way call 00 Placing a call on hold 00 Using call waiting 00 Ending a call 00 Dialing without ArialVoice 00 PLACING A CALL OVER THE INTERNET Overview: Internet telephone technology 00 Making a call over the Internet 00 ADJUSTING THE VOLUME Changing settings through Windows 00 Muting a call 00 TROUBLESHOOTING ArialPhone doesn’t understand my commands 00 ArialPhone doesn't recognize names in my phone book 00 ArialPhone can’t dial my call 00 The volume is too loud or too soft 00 My call breaks up 00
Last date revised: TUESDAY, MAY 15, 2001 page 3 of 3 SAFETY INFORMATION Overview: How ArialPhone operates 00 Safety guidelines 00 Caring for your phone 00 n Protecting your phone n Disposing of batteries CONTACTING TECHNICAL SUPPORT 00 INDEX 00
Last date revised: TUESDAY, MAY 15, 2001 page 4 of 4 SAFETY GUIDELINES FCC Notice This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions. 1. This device does not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s ability to operate the equipment. FCC Part 68 and IC CS-03: This equipment complies with Part 68 of the FCC rules and Industry of Canada IC CS-03. The Base Station bears a label on the bottom of the base which contains the FCC registration number and the ringer equivalence number (REN). If requested, this information must be provided to the telephone company. This equipment uses the following standard jack types for network connection: RJ-11 This equipment contains an FCC compliant modular jack. It is designed to be connected to the telephone network or premises wiring using compatible modular plugs and cabling which comply with the requirements of FCC Part 68 rules. The Ringer Equivalence Number, or REN, is used to determine the number of devices which may be connected to the telephone line., An excessive REN may cause the equipment to not ring in response to an incoming call. In most areas, the sum of the RENs of all equipment on a line should not exceed five (5.0). In the unlikely event that this equipment causes harm to the telephone network, the telephone company can temporarily disconnect your service. The telephone company will try to warn you in advance of any such disconnection, but if advance notice isn't practical, it may disconnect the service first and notify you as soon as possible afterwards. In the event such a disconnection is deemed necessary, you will be advised of your right to file a complaint with the FCC.
Last date revised: TUESDAY, MAY 15, 2001 page 5 of 5 From time to time, the telephone company may make changes in its facilities, equipment, or operations which could affect the operation of this equipment. If this occurs, the telephone company is required to provide you with advance notice so you can make the modifications necessary to maintain uninterrupted service. Warranty information may be obtained by calling: 847-968-5881. External cables including only the USB and phone cable can be replaced by the user with UL approved cables. The Earset is hearing aid compatible. INDUSTRY CANADA: NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements documents. The department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be coordinated by an ArialPhone representative by calling 847-968-5881. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protections that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Caution: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.
Last date revised: TUESDAY, MAY 15, 2001 page 6 of 6 RF Exposure IMPORTANT: NOTE: To comply with FCC RF exposure compliance requirements, the following antenna installation and device operating configurations must be satisfied – The antenna used for this transmitter (i.e., Base Station) must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu