Aram Huvis ASNII PORTABLE SKIN/HAIR DIAGNOSIS SYSTEM User Manual

Aram Huvis Co., Ltd. PORTABLE SKIN/HAIR DIAGNOSIS SYSTEM

User Manual

ASNII-100 User’s Manual Aramo Smart Navigator SKIN DIAGNOSIS SYSEM Aramo Smart NavigatorII-100
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Content 1. How to use 2. How to operate •System setting •Wireless & network setting 3. How to diagnosis •Full mode •View mode 4. How to set 5. Additional information •Standard & Features •Troubleshooting Guide & FAQ •CAUTION UPON INSTALL & USE Aramo Smart NavigatorII-100
System and components 2 Batteries Manual Charger USB cable Cleaning cloth Sebum paper (100 paper) Hand strip ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑬ ⑩ ⑪ ⑫ ⑭ Number Function Number Function ① Moisture/Elasticity sensor ⑧ SD memory card slot ② LED light & Lens ⑨ On / Off ③ Touch screen ⑩ No function ④ Go to "Setup" ⑪ Volume on MP3 ⑤ Capture button ⑫ Volume on MP3 ⑥ Go to "Back" ⑬ Capture button ⑦ External Adaptor connection ⑭ Battery cover Cradle Leather case How to use Touch pen
Battery uses Open the cover. Insert the battery. Close the cover. How to charge By Battery charger By Cradle Charge the unit after connecting the cable. Plug the charger into the cradle and connect the device to the cradle. * Available to check the charging status on system main page Note Available to re-charge the spare battery on back side of cradle. Battery front side How to use
The touch screen lets you select items or perform function. Learn basic actions to use touch screen. •Tap : Touch once with your finger to select or launch the menu option, or application •Drag : Tap and drag your finger up, down, left, or right to move to items on lists. •Tap and hold : Tap an item and hold it for more than 2 seconds to open pop-up option list •Double-tap : Tap twice quickly with your finger to zoom in or out while viewing photos. Use the touch screen Enter text Enter text by selecting characters on the virtual keypads ① ③ ② No. Function ① Shortcuts for frequent use ② Capitals lock key ③ Switch between ABC and Number(symbol) mode ④ Space ⑤ Delete ⑥ Start new line ④ ⑤ ⑥ ④ ③ ② ⑤ ⑥ How to use
Icons to operate in Manual Icons To do Touch to take images from the device Go to capturing page OK Go back to previous page Use the image taken for diagnosis Analyze the image 3D Image Go back to previous page on skin image Change the lighting mode OK Cancel Analysis 3D USE Mode * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus. Note How to use
Icons To do Icons To do Diagnosis application Alarm Gallery (album) Add alarm MP3 Internet System setting Turn on / off & System main page How to operate_ Turn on/off Go back to system main page Go to “setup” page - On/Off button: Press and hold for 3 seconds - “Sleep” mode on / off : Press the button * Tap in red box Turning on… Turning off…
≫ Brightness setting How to set the system Adjust the Brightness to display the application more effectively. How to operate_ System setting * Tap in red box Check the “√” mark. The setting have to be activated to download application. ≫ Application setting
Deactivate Changed the keyboard language Select the language you want to use ① ② ≫ Language setting Keyboard language How to operate_ System setting * Tap in red box How to set the system
How to operate_ System setting * Tap in red box How to set the system ≫ Language setting How to change the System language Select the language you want to use How to change the keyboard language Drag left or right to choose the language Press and hold the “space-bar” to show the language selection
≫ Date & Time setting How to set date Enter the current date How to set time zone & time Select user’s time zone or city name Enter the current time How to operate_ System setting * Tap in red box How to set the system
Tap “setup”. On System main page Find and connect the available Wi-Fi ① ② Check the Wi-Fi mark ≫ Wi-Fi connection How to operate_ System setting * Tap in red box How to set the system
≫ Bluetooth Pairing How to pair the diagnosis system with the host device * Host device : all kinds of PC including tablet PC you want to send the diagnosed result or the related images. Note Check the name of host device Select the host device Activate the Bluetooth function on host device for the diagnosis system to search and pair with host device. ← Example image Scan for host device Accept the paring request sent from diagnosis system. Password: 0 (number) On host device Check the pairing status Check the Bluetooth mark How to operate_ System setting * Tap in red box How to set the system
≫ Bluetooth Pairing Enter the device name what you want How to change the name of diagnosis system How to operate_ System setting * Tap in red box How to set the system
Diagnosis Process ≫ How to setup Tap “setup”. ≫ Language Select the language ≫ Option * Show measurement page before starting diagnosis. - Green: activate status - Gray: deactivate status ≫ Measurement Select what you want to diagnose * Show the diagnosed result by number on the capture page. Green : activate → Analyze Gray : deactivate → Do not analyze How to operate_ setting * Tap in red box Drag
Diagnosis Process ≫ How to setup Tap “setup”. ≫ Language Select the language ≫ Option * Show measurement page before starting diagnosis. - Green: activate status - Gray: deactivate status ≫ Measurement Select what you want to diagnose * Show the diagnosed result by number on the capture page. Green : activate → Analyze Gray : deactivate → Do not analyze How to operate_ setting * Tap in red box Drag
Diagnosis Process ≫ How to setup ≫ Advance ≫ Network Check the version of application Set Wireless connection; Wi-Fi or Bluetooth Register the sender’s email account Selected status Unselected status ≫ Email Enter the ID (ex. abcd1234) Enter the Domain (ex. @gmail.com) Enter the Password (ex. aaaa1234) * Tap in red box How to operate_ setting
Place the sensor onto your skin and tap Diagnosis Process ≫ Full mode Note * Gray : deactivate status * Black : activate status Enter age group and gender of customer ≫ Start diagnosis ≫ Hydration & Elasticity Note * Do NOT move during the measurement. * “Please, rescan…” : To measure again by taping How to diagnose_ Full mode * Tap in red box
U - ZONE Diagnosis Process ≫ Full mode Put the below sebum tape (pink area) onto the U or T-zone of your face for 3 seconds. T - ZONE ≫ Sebum ( T & U zone) * Tap in red box How to diagnose_ Full mode → How to hold the sebum paper How to put the sebum paper on T-zone How to put the sebum paper on U-zone
Diagnosis Process ≫ Full mode ≫ Sebum ( T & U zone) Tap Tap to go back to “Sebum-U/T” page. Analysis Tap each image to magnify * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus. * Take the image without any white blank. Note * Tap in red box How to diagnose_ Full mode X O
Diagnosis Process ≫ Full mode Tap. Analysis ≫ Pore Tap 3D image 3D * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus. Note * Tap in red box Drag How to diagnose_ Full mode
Diagnosis Process ≫ Full mode Tap. Analysis ≫ Melanin Tap. * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus. Note ≫ Sensitivity Analysis ≫ Wrinkle Tap. Analysis Choose the area by moving the white box * Tap in red box How to diagnose_ Full mode
Diagnosis Process ≫ Full mode Tap 3D ≫ Wrinkle Tap * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus. Note ≫ Acne Analysis * Tap in red box 3D image How to diagnose_ Full mode
Diagnosis Process ≫ Full mode ≫ Analysis result Note * Product recommendation : to be updated * Tap in red box How to diagnose_ Full mode
Diagnosis Process ≫ Full mode Enter the customer’s email address. ≫ Send * Bluetooth : to be updated Note Turn to USB storage… Recognized as a Removable disk on PC * Tap in red box How to diagnose_ Full mode
Diagnosis Process ≫ View mode ≫ NL mode (for Wrinkle) Turn to USB storage… Tap to change the lighting mode. ≫ PL mode (for Melanin) Tap to change the lighting mode. Mode Mode * Tap in red box Choose the area by moving the white box 3D image * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus. Note How to diagnose_ View mode
Diagnosis Process ≫ View mode ≫ UV mode (for Acne) UV UV UV * Touch the “>” or fling the screen to go to next page. * Tap the screen to focus. Note * Tap in red box Tap to change the lighting mode. Mode How to diagnose_ View mode
How to update the application * Check the Wi-Fi connection before updating Note ② ① ① ② Drag down How to set the ASNII-100 * Tap in red box
How to remove the application On System main page Find “Smartnavi” application. How to set the ASNII-100 * Tap in red box
① ② How to re-install the application after removing On System main page Enter the address below and download the application www.aramhuvis.com/data/asn2/smartnavi.apk Drag down How to set the ASNII-100 * Tap in red box
Standard & Features Additional information Section Item Contents Optical/Camera Camera 5M pixel CMOS Sensor X30,X60 TPL AF VCM Sensor Hydration Light Normal, Polarize, UV-[3CH] HW CPU S5PV210 ARM-CORTEX A8 [1GHz] Memory DDR2 SDRAM (512MB) / NAND FLASH (512MB) SD Memory T-Flash (Micro SD) LCD 2.2Inch TFT LCD QVGA (240*320) Touch R-TOUCH Wi-Fi Wireless 802.11b/g/n (Wi-Fi Direct Avail) Bluetooth BT ver3.0+HS Audio AC97 , Codec (WM1800) SPEAKER Max 1.0 W, Internal Speaker USB USB 2.0 HOST/DEVICE Battery Li-ion (1150mAh) Adaptor AC Adaptor DC 5V / 2000mA Key Pad Power , 4-direction navi Key ,Left , Right Microphone Internal MIC Storage Micro SD ver2.0 (2GB) Weight 127g (with battery) Dimension (mm) 57(W) x 116(H) x 18 (D) SW Bootloader u-boot-1.3.2 OS Android Gingerbread 2.3 Media MPEG4(SP/ASP)/H.263(Profile3)/H.264(BP/MP/HP) Applications Google app. Debugging Port USB Client/UART
Troubleshooting Guide & FAQ Additional information I cannot turn on the device. • Connect and charge the device (or the battery) using the adaptor provided the supplier. (The battery charging indicator will be shown on the system main page.) I cannot power on the device even the battery is still full. •The battery might be dislocated on the device. Please separate the battery from the device and put it on, and then power on again. The battery is not charging very well. •Separate the battery from the device and put it on again. •Check the connection among a device, a battery, and a charger. •A battery cannot be charged if there is an alien substance on the charging port. In this case, please use the device after cleaning the charging port of the device or check whether the sticker is attached on charging port. The using time of the battery is different from the manual. •The battery using time will be shorten if you put the charged battery in a low or high temperature. •The battery using time vary in service type, using environment, using period of the battery. •The battery is consumed without using the device, and the battery using time will be shorten if you use additional functions of the device. The device turns on but the diagnosis doesn’t work. •Check the smart card is correctly inserted (SD card slot on the button of the device). There are dust on the device. • Clean the dust by using a smooth fabric. Do not use benzene, alcohol, and a synthetic detergent. The screen is frozen and the keys not working when using the device. •Separate the battery from the device and put it on again. If the device is still not working, please contact to the customer service center. A "force close" message appears on the screen. •The repetition of commands can trigger a bug. Sometimes there may be a brief delay before the command is completed. Do not repeat/multiply the tasks as the device will no longer be able to follow them.
Troubleshooting & FAQ Additional information I cannot connect to Wi-Fi. •Check the connection status on setting page. •Try to connect to another Wi-Fi. •- Bluetooth : Check the pairing status and try to re-pair the device with host device. I cannot connect to Blue-tooth. •Make sure to use the Bluetooth hosting devices that have Bluetooth certified with the logo. You may need an external Bluetooth dongle for those devices that do not have Bluetooth feature. •Bring the device to closer with the Bluetooth hosting device. •Try to re-pair the device with host device. •The password of pairing is “0”(number). The touchscreen doesn’t react to my finger commands. •Before using for the first time remove the protective plastic film. •Use the stylus-pen provided from supplier. The screen was turned off. •The device has a power save function that turns the screen OFF after 1 minute. Press the on/off button to turn on the screen. I can see the black screen only during measurement. •Check the LED light inside lens on the head part when you try to measurement. If you cannot see the light, please connect the customer service center. The image is not clear. •Tap the screen while capturing to focus. I cannot update the diagnosis application. •Check the network connection, the update process can be done after connect to Wi-Fi.
CAUTION UPON INSTALL & USE Additional information Thanks for using the product of Aram HUVIS Co., Ltd.. The product undergoes strict quality management and inspection process before production and introduction to market. Product defect or trouble during warranty period is entitled to free repair. Please, fill out warranty and keep it with receipt to enjoy better service in the future. ▶Warranty Period 14 MONTHS from the products arrival. ▶Service Free of Charge Service is provided free of charge only if product defect occurs within 1 year from the date of purchase (within Warranty Period). ▶ Repair with Charge * Cases except for product defect If service is requested due to the reasons except for defect, service fee may be charged. - Defect resulting from the mistreatment by the user - Defect resulting from the lack of caution (leakage or shock) or unauthorized repair or remodeling - Defect due to natural disasters such as fire, earthquake or flood Model Serial No. Date of Purchase Customer Name Place of Purchase Contact Information Case Service Within Warranty Period After Warranty Period Functional or operational defect which occurs under normal condition of use within 10 days after purchase Product replacement Functional or operational defect which occurs under normal condition of use within 14 year after purchase Free of charge Defect which results from the mistreatment by the user Partial free repair Or Repair with charge Repair with charge
CAUTION UPON INSTALL & USE Additional information 1. Humidity Do not install the product in the place with rain leakage or of high humidity. If the product is leaking, it may cause damage or fire. 2. Repair Do not disassemble or remodel the product because it may cause danger such as an electric shock. When a problem occurs, do not attempt to repair it. Instead, contact the seller. 3. Electricity Do not use electricity except for what is prescribed here. Using improper electricity may cause an electric shock or danger. 4. Installation Environment Do not install the product in a too hot or cold place. (Recommended Temperature : 15℃ ~ 35℃ ) 5. Sunlight Do not expose the camera of the product to the sun or a direct ray of light. It may cause product damage 6. Shock or Vibration Do not drop the product or give it a strong shock or vibration. 7. If the product does not work properly If a problem occurs while using the product (unidentified noise, smell or smoke), stop using it and turn the power off and contact the seller. 8. Dirt on Lens Make sure that keep camera lenses clean and away from pollution. If it polluted by finger print or external dirt, cleanse it with cotton stick socked with 70% Ethyl Alcohol solution or use air blower to remove the dust. Those products are available at camera shop. 9. For After-Service When any of the following occurs, turn the power off and have the product repaired at the place of purchase. i. Power Connector is damaged ii. The product is leaking iii. Liquid is spilt over the product or it has alien substance. iv. Product does not work as indicated in this manual. (Attempting to operate the product against manual may cause more serious damage.) v. Product is dropped to the floor and seriously damaged.
Rm.801 Byucksan Technopia, #434-6 Sangdaewon-dong, Jungwon-gu, Seongnam-city, Gyeonggi-do, KOREA 462-716 TEL [82-31] 732.6320 FAX [82-31] 732.6330 E-MAIL info@aramhuvis.com WEBSITE www.aramhuvis.com Aramo Smart NavigatorII-100

Navigation menu