Aram Huvis ASI ASI User Manual ASI100

Aram Huvis Co., Ltd. ASI ASI100

User manual

User Manual
ContentsA. Components 23467141516171819202124B. H/WPartsⅰ. Both Sidesⅱ.Settingsⅱ. How to connect with theprogramE. Application ⅰ. Start Analysis ⅱ. Full Analysisⅲ.View ModeCRMMoistureSebumPoreMelaninAcneWrinkleSensitivity 22Summary 23C.System Settingsⅰ. Download &Installⅲ.Wi-Fi Combo 8D. Program Settings 11ⅰ. Device Certification 12F. Warrantty 25G. FCC 271 Contents※Notes on use·The images of this manual can be diVerent with the actual things.·The information contained in this manual and future improvements are subject to change withoutnotice.·The latest version of the manual will be updated at the below link. http://www.aramhuvis.com/downloads
Main body with skin lens (ASI100)ChargerManualBatteryUSBcableCradleSebum paper 1 box Cleaning clothComponentsA.Components 2
Battery coverCaptureStart, Analysis, Result ModeupModedownPower on& oVUSB & chargerconnectorH/WPartsBoth SidesMoisture sensor LED light & lens3B. H/W Parts - Both Sides
Open the battery cover by pushing it leh to right with thumbs. Insert the battery and gently press the battery into place.Close thecover.12312 To turn onthe power1 Press and hold “power”button.2 "Indicate LED" starts twinkling in blue light. Whenit stops, the device is ready to use.1To turn oVthe power1 Press andhold "power" button.2"Indicate LED" will be turned oV.H/WPartsSettingsInsert the batteryB. H/W Parts -Settings 4
1 Push the plugup.2 Then 220V European type is disassembled and you can see the 110V-220VAmerican type inside of the charger.3 Choose the one you want to use and connect USB cable in adaptor.H/WPartsSettingsCharger can be used for Amercian type & European type. The default is European type .1235B. H/W Parts - Settings
PCUser1 Go to link on the browser as below. http://www.aramhuvis.com/downloads2 Install the program.Tablet device or Smartphone user1 iOS : Go to “App Store” and download application.2Android : Go to “Goolgle Play Store” and download it.System SettingsDownload &InstallC. System Settings - Download &Install 6*Charge ASI device. It is possible to operate ASI device while charging, but it is recommended to charge the device at least an hour if the battery was totally depleted.*The micro USB port does not support data transfer.
1First of all, check the Wi-Fi name and password which is described at back side of battery cover.2Wi-Fi name & password must be same and the format is “ASI_XXXX”.3Turn on thedevice.4While turning on the device, prepare PC, Tablet, Smartphone to run the S/W.5Once “ASI” device is turned on, please go to network setting to set up the Wi-Fi connection.6Among Wi-Fi lists, find “ASI_XXXX” and select it.7When above code is connected, run the program“Solutionist”.8To check working properly, please check the program and see the leh below side.9If it is correctly set up, you can see the orange light of Wi-Fi singal.SSID: ASI_XXXX PW: XXXXXXXXSystem SettingsHow to connect with the program7C. System Settings - How to connect with the program
Wi-Fi Combo-It means user could use device and internet at the same time.- With this function, user can send an email aher analysis immediately.How touse?1The device has AP(ASI_XXXX) to be connected with the program “Solutionist” by Wi-Fi.2First of all, connect the device to AP to use it with “Solutionist”.3Run “Solutionist”.PC/Phone /TabletWireless LANInternetAnalyzerSystem SettingsWi-Fi ComboC. System Settings - Wi-Fi Combo 8
1 Touch Settings.2 In “General Settings”, go to “Wi-Fi” and touch “Scan”button.3 The available Wi-FI lists appear. Among them, please choose the best signal Wi-Fi to connect it.4 During connect it, you can see the message saying that ASI device will be automatically disconnected andreboot. Please touch “OK” button.System SettingsWi-Fi Combo9C. System Settings - Wi-Fi Combo
1 When Wi-Fi is connected, please go to “Settings” page to set up the Wi-Fi connection.You can see now the Wi-Fi is connected. Please turn it oV and connect with device AP code (ASI_XXXX).2 The analyzer is connected with APcode.3 Then, run “Solutionist” program.4 Thengo to the settingsagain.TheselectedAPwill be checked as leh. TheWi-Ficombo is done.System SettingsWi-Fi ComboC. System Settings - Wi-Fi Combo 10
1 General SettingsChange the language, analysis mode andetc.2 Analysis SettingsSet up the skin type and analysisparameter.3 Recommended ProductsAvailable for each analysis result.4AboutCheck the current version and update isavailable inWi-Fi connection.11 D. Program SettingsProgramSettings
1 Solutionist program includes three programs.But when you start “Solutionist” program with ASI-100 device you can see the pop message saying that the program is compatible with only “SKIN” device.Touch “OK”button.2Then you will see now only “SKIN”program isactivated.On main menu, touch “Settings”.3 Among the menu, please select “Device Activation”.4 There is a device model name with serial code.Please touch “Get Certification” to register the device inprogram.ProgramSettingsDevice CertificationD. Program Settings - DeviceCertification 12
5 Device certification is complete. Please touch “OK” button.6 When it is done, you could touch “Product Download” button to load in server.7 If you have the recommended product data in server, the product will be downloaded by clicking “Product download”.If you do not have the recommended product data, you can see the message asleh image.ProgramSettingsDevice Certification13 D. Program Settings - DeviceCertification
1 Touch “Analysis” to start.Remote Control (OnlyTablet)1During analysis, you can control the device in "Solutionist" program.2In screen, touch "Control Menu On" to activate "Remote".3You can make use of this function in all analysis pages.ApplicatonStart AnalysisE. Application - Start Analysis 14
1 Input the information.- full name, email address, gender and agegroup2 Take picture of customer's face with built-in camera or use the picture you already have in device.3 Among the customer lists, select the client to check or start analysis.4 Check the customer information and analysis resultlist.15 E. Application - CRMApplicatonCRM
1 Press "capture" button and when you hear "beep" sound, please put the sensor onto your skin and wait until you hear "beep" sound again.Moisture sensor2 The result will appear.To analyze the next step, touch the below button.E. Application - Moisture 16ApplicatonMoisture
U-zoneSebumpaperor1Put the sebum paper onto the U-zone on the cheek, then press it for 2~3 seconds.2Place camera on the pink area and take picture. (U-zone)3 Put the sebum paper onto the T-zone on face, then press it for 2 ~3 seconds.Place camera on the pink areaand take picture.(T-zone)T-zone Sebumpaper4 The result will appear.To analyze the next step, touch the below button.17 E. Application - SebumApplicatonSebum
ororor1 Touch button to activate camera mode.2 Put the camera onto the skin and touch button to capture the image.Then touch button to analyze it.3 The result will appear.Touch "Compare" button to check the sample images as 4 .To analyze the next step, touch the belowbutton.4 Compare your image with 3 sample images.-Good- Normal- BadApplicatonPoreE. Application - Pore 18
ororor1 Touch button to activate camera mode.2 Put the camera onto the skin and touch button to capture the image.Then touch button to analyze it.4 Compare your image with 3 sample images.-Good- Normal- BadApplicatonMelanin3 The result will appear.Touch "Compare" button to check the sample images as 4 .To analyze the next step, touch the belowbutton.19 E. Application - Melanin
ororor1 Touch button to activate camera mode.2 Put the camera onto the skin and touch button to capture the image.Then touch button to analyze it.4 Compare your image with 3 sample images.-Good- Normal- BadApplicatonAcne3 The result will appear.Touch "Compare" button to check the sample images as 4 .To analyze the next step, touch the belowbutton.E. Application - Acne 20
ororor1 Touch button to activate camera mode.2 Put the camera onto the skin and touch button to capture the image.Then touch button to analyze it.4 Compare your image with 3 sample images.-Good- Normal- BadApplicatonWrinkle3 The result will appear.Touch "Compare" button to check the sample images as 4 .To analyze the next step, touch the belowbutton.21 E. Application - Wrinkle
ororor1 Touch button to activate camera mode.2 Put the camera onto the skin and touch button to capture the image.Then touch button to analyze it.4 Compare your image with 3 sample images.-Good- Normal- BadApplicatonSensitivity3 The result will appear.Touch "Compare" button to check the sample images as 4 .To check all the results, touch"Show All Results" or the below button.E. Application - Sensitivity 22
1 Check the result.3 Available to check productimage.ApplicatonSummary2 Touch button or each parameter's name on pentagon graph.Once you select "Show Recommended Product",productimagewillpopupas 3.23 E. Application - Summary
1In view mode, it is able to take pictures with capture button in many times.2 The user can select analysis parameter to takepicture.3 In one screen, you can see 4 diVerent images maximum.4 The user can mark the defect or concern accordingto the image with note function.E. Application - View Mode 24ApplicatonViewMode
1The product undergoes strict quality management and inspection process before production and introduction to market.2In case of functional or operational defect occurring under normal condition of use within 10 days aher purchase, we will repair it for free or replace in new product.3When this product goes out under the normal use, we will repair it free of charge under warranty.4Please keep the warranty card when you ask for repair service.5Customer needs to pay repair charge aher warranty runs out.6For this product, warranty period is 14 months from the Invoice date.7CostWithin warranty : Sending delivery(Buyer), repair cost and returning delivery(Aram)-If the product is broken by user's fault, repair cost could be charged.Aher warranty : Sending delivery and repair cost(Buyer), returning delivery(Aram)8How to send :-As sending a present from person to person by EMS or FEDEX. (Do not write the company name)- Total value should be under US $99.(Write non-commercial value)Warranty25 F. Warranty
Service request formDate of purchase / / CompanyContactpersonAddress: Tel:Product name, serial no :Problems :Shipping address:#909 Byucksan Technopia, 560, Dunchon-daero, Jungwon-gu,Seongnam-si, Gyeonggi-do, 13230 Rep. KoreaE-mail :support@aramhuvis.comTel : +82 70 4687 1712 / Fax : +82 31 732 6330WarrantyF. Warranty 26
FCCFCC Compliance StatementThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC InterferenceStatementThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oV and on, the user is encouraged to correct the interference by one of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment andreceiver.•Connect the equipment into an outlet on a circuit diVerent from which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.FCCCautionAny changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.FCC Radiation Exposure StatementIEEE 802.11bor 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11.27 G.FCC
Memo
Memo
Memo
HEADOFFICERm401~402,172, Dolma-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 13605 Rep. KoreaPRODUCTIONDIVISION & FACTORY#909Byucksan Technopia, 560,Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, 13230 Rep. KoreaTel: 070-4687-1712 / Fax: 031-732-6330 / Email: info@aramhuvis.com http://www.aramhuvis.com

Navigation menu