Aram Huvis APSII PORTABLE SKIN/HAIR DIAGNOSIS SYSTEM User Manual Microsoft PowerPoint APSII 100 x

Aram Huvis Co., Ltd. PORTABLE SKIN/HAIR DIAGNOSIS SYSTEM Microsoft PowerPoint APSII 100 x

User Manual

APSIIUser’s ManualAramo Professional ScannerSKIN DIAGNOSIS SYSEMAramo ProfessionalScannerII
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operation in conjunction with any other antenna or transmitter. This equipment complies with FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
Content1. How to use2. How to operate•System setting•Wireless & network setting3. How to diagnosis•Full mode•View mode4. How to set 5. Additional information•Standard & Features•Troubleshooting Guide & FAQ•CAUTION UPON INSTALL & USEAramo Smart NavigatorII‐100Aramo ProfessionalScannerII
The touch screen lets you select items or perform function. Learn basic actions to use touch screen.•Tap : Touch once with your finger to select or launch the menu option, or application•Drag : Tap and drag your finger up, down, left, or right to move to items on lists.•Tap and hold : Tap an item and hold it for more than 2 seconds to open pop-up option list•Double-tap : Tap twice quickly with your finger to zoom in or out while viewing photos.Use the touch screenEnter textEnter text by selecting characters on the virtual keypads①③②No. Function①Shortcuts for frequent use②Capitals lock key ③Switch between ABC and Number(symbol) mode④Space⑤Delete⑥Start new line④⑤⑥④③②⑤⑥How to use
Icons to operate in ManualIcons To do Touch to take images from the deviceGo to capturing pageOKGo back to previous pageUse the image taken for diagnosisAnalyze the image3D ImageGo back to previous page on skin imageChange the lighting mode OKCancelAnalysis3DUSEMode* Touch the “>” or fling the screen to go to next page.* Tap the screen to focus.NoteHow to use
Icons To do Icons To do Diagnosis application Alarm Gallery (album) Add alarmMP3 InternetSystem settingTurn on / off & System main pageHow to operate_ Turn on/offGo back to system main pageGo to “setup” page-On/Off button: Press and hold for 3 seconds-“Sleep” mode on / off : Press the button* Tap in red boxTurning on… Turning off…
≫ Brightness settingHow to set the systemAdjust the Brightness to display the application more effectively.How to operate_ System setting* Tap in red boxCheck the “√” mark.The setting have to be activated to download application.≫ Application setting
Deactivate Changed the keyboard languageSelect the language you want to use①②≫ Language settingKeyboard languageHow to operate_ System setting* Tap in red boxHow to set the system
How to operate_ System setting* Tap in red boxHow to set the system≫ Language settingHow to change the System languageSelect the language you want to useHow to change the keyboard languageDrag left or right to choose the languagePress and hold the “space-bar” to show the language selection
≫ Date & Time settingHow to set dateEnter the current dateHow to set time zone & timeSelect user’s time zone or city nameEnter the current timeHow to operate_ System setting* Tap in red boxHow to set the system
Tap “setup”.On System main pageFind and connect the available Wi-Fi①②Check the Wi-Fi mark≫ Wi-Fi connectionHow to operate_ System setting* Tap in red boxHow to set the system
≫ Bluetooth PairingHow to pair the diagnosis system with the host device * Host device : all kinds of PC including tablet PC you want to send the diagnosed result or the related images.NoteCheck the name of host deviceSelect the host deviceActivate the Bluetooth function on host device for the diagnosis system to search and pair with host device.← Example imageScan for host device Accept the paring request sent from diagnosis system.Password: 0 (number)On host deviceCheck the pairing statusCheck the Bluetooth markHow to operate_ System setting* Tap in red boxHow to set the system
≫ Bluetooth PairingEnter the device name what you wantHow to change the name of diagnosis systemHow to operate_ System setting* Tap in red boxHow to set the system
Diagnosis Process ≫ How to setupTap “setup”.≫ LanguageSelect the language≫ Option* Show measurement page before starting diagnosis.- Green: activate status- Gray: deactivate status≫ MeasurementSelect what you want to diagnose* Show the diagnosed result by number on the capture page.Green : activate → AnalyzeGray : deactivate → Do not analyzeHow to operate_ setting* Tap in red boxDragDrag
Diagnosis Process ≫ How to setupTap “setup”.≫ LanguageSelect the language≫ Option* Show measurement page before starting diagnosis.- Green: activate status- Gray: deactivate status≫ MeasurementSelect what you want to diagnose* Show the diagnosed result by number on the capture page.Green : activate → AnalyzeGray : deactivate → Do not analyzeHow to operate_ setting* Tap in red boxDragDrag
Diagnosis Process ≫ How to setup≫ Advance ≫ NetworkCheck the version of application Set Wireless connection; Wi-Fi or BluetoothRegister the sender’s email accountSelected statusUnselected status≫ EmailEnter the ID (ex. abcd1234)Enter the Domain (ex. @gmail.com)Enter the Password (ex. aaaa1234)* Tap in red boxHow to operate_ setting
Place the sensor onto your skin and tap Diagnosis Process ≫ Full mode Note* Gray : deactivate status* Black : activate statusEnter age group and gender of customer≫ Start diagnosis≫ Hydration & ElasticityNote* Do NOT move during the measurement.* “Please, rescan…” : To measure again by taping How to diagnose_ Full mode* Tap in red box
U - ZONEDiagnosis Process ≫ Full mode Put the below sebum tape (pink area) onto the U or T-zone of your face for 3 seconds.T - ZONE≫ Sebum ( T & U zone)* Tap in red boxHow to diagnose_ Full mode→ How to hold the sebum paperHow to put the sebum paper on T-zoneHow to put the sebum paper on U-zone
Diagnosis Process ≫ Full mode ≫ Sebum ( T & U zone)TapTap to go back to “Sebum-U/T” page.Analysis Tap each image to magnify* Touch the “>” or fling the screen to go to next page.* Tap the screen to focus.* Take the image without any white blank.Note* Tap in red boxHow to diagnose_ Full modeXO
Diagnosis Process ≫ Full mode Tap. Analysis≫ PoreTap 3D image3D* Touch the “>” or fling the screen to go to next page.* Tap the screen to focus.Note* Tap in red boxDragDragHow to diagnose_ Full mode
Diagnosis Process ≫ Full mode Tap. Analysis≫ MelaninTap.* Touch the “>” or fling the screen to go to next page.* Tap the screen to focus.Note≫ SensitivityAnalysis≫ WrinkleTap. AnalysisChoose the area by moving the white box* Tap in red boxHow to diagnose_ Full mode
Diagnosis Process ≫ Full mode Tap 3D≫ WrinkleTap* Touch the “>” or fling the screen to go to next page.* Tap the screen to focus.Note≫ AcneAnalysis* Tap in red box3D imageHow to diagnose_ Full mode
Diagnosis Process ≫ Full mode ≫ Analysis resultNote* Product recommendation : to be updated* Tap in red boxHow to diagnose_ Full mode
Diagnosis Process ≫ Full mode Enter the customer’s email address.≫ Send* Bluetooth : to be updatedNoteTurn to USB storage…Recognized as a Removable disk on PC* Tap in red boxHow to diagnose_ Full mode
Diagnosis Process ≫ View mode ≫ NL mode (for Wrinkle)Turn to USB storage…Tap to change the lighting mode.≫ PL mode (for Melanin)Tap to change the lighting mode.ModeMode* Tap in red boxChoose the area by moving the white box3D image* Touch the “>” or fling the screen to go to next page.* Tap the screen to focus.NoteHow to diagnose_ View mode
Diagnosis Process ≫ View mode ≫ UV mode (for Acne)UV UV UV* Touch the “>” or fling the screen to go to next page.* Tap the screen to focus.Note* Tap in red boxTap to change the lighting mode.ModeHow to diagnose_ View mode
How to update the application* Check the Wi-Fi connection before updating Note②①①②Drag down How to set the APSII* Tap in red box
How to remove the applicationOn System main pageFind “Smartnavi” application.How to set the APSII* Tap in red box
①②How to re-install the application after removingOn System main pageEnter the address below and download the applicationwww.aramhuvis.com/data/asn2/smartnavi.apkDrag down How to set the APSII* Tap in red box
Standard & FeaturesAdditional informationSection Item ContentsOptical/Camera Camera5MpixelCMOSSensor X30,X60TPLAF VCMSensor HydrationLight Normal,Polarize,UV‐[3CH]HW CPU S5PV210ARM‐CORTEXA8[1GHz]Memory DDR2SDRAM(512MB)/NANDFLASH(512MB)SDMemory T‐Flash(MicroSD)LCD 2.2InchTFTLCDQVGA(240*320)Touch R‐TOUCHWi‐Fi Wireless802.11b/g/n(Wi‐FiDirectAvail)Bluetooth BTver3.0+HSAudio AC97,Codec(WM1800)SPEAKER Max 1.0 W, InternalSpeakerUSB USB 2.0 HOST/DEVICEBattery Li‐ion(1150mAh)Adaptor ACAdaptorDC5V/2000mAKeyPad Power , 4-direction navi Key ,Left , Right Microphone InternalMICStorage Micro SDver2.0(2GB)Weight 127g (withbattery)Dimension(mm) 57(W) x116(H)x18(D)SW Bootloader u‐boot‐1.3.2OS AndroidGingerbread2.3Media MPEG4(SP/ASP)/H.263(Profile3)/H.264(BP/MP/HP)Applications Googleapp.DebuggingPort USBClient/UART
Troubleshooting Guide & FAQAdditional informationI cannot turn on the device.•Connect and charge the device (or the battery) using the adaptor provided the supplier.(The battery charging indicator will be shown on the system main page.)I cannot power on the device even the battery is still full.•The battery might be dislocated on the device. Please separate the battery from the device and put it on, and then power on again.The battery is not charging very well.•Separate the battery from the device and put it on again.•Check the connection among a device, a battery, and a charger.•A battery cannot be charged if there is an alien substance on the charging port. In this case, please use the device after cleaning the charging port of the device or check whether the sticker is attached on charging port.The using time of the battery is different from the manual.•The battery using time will be shorten if you put the charged battery in a low or high temperature.•The battery using time vary in service type, using environment, using period of the battery.•The battery is consumed without using the device, and the battery using time will be shorten if you use additional functions of the device.The device turns on but the diagnosis doesn’t work.•Check the smart card is correctly inserted (SD card slot on the button of the device).There are dust on the device.• Clean the dust by using a smooth fabric. Do not use benzene, alcohol, and a synthetic detergent.The screen is frozen and the keys not working when using the device.•Separate the battery from the device and put it on again. If the device is still not working, please contact to the customer service center.A "force close" message appears on the screen.•The repetition of commands can trigger a bug. Sometimes there may be a brief delay before the command is completed. Do not repeat/multiply the tasks as the device will no longer be able to follow them.
Troubleshooting & FAQAdditional informationI cannot connect to Wi-Fi.•Check the connection status on setting page.•Try to connect to another Wi-Fi.•- Bluetooth : Check the pairing status and try to re-pair the device with host device.I cannot connect to Blue-tooth.•Make sure to use the Bluetooth hosting devices that have Bluetooth certified with the logo. You may need an external Bluetooth dongle for those devices that do not have Bluetooth feature. •Bring the device to closer with the Bluetooth hosting device.•Try to re-pair the device with host device.•The password of pairing is “0”(number).The touchscreen doesn’t react to my finger commands.•Before using for the first time remove the protective plastic film.•Use the stylus-pen provided from supplier.The screen was turned off.•The device has a power save function that turns the screen OFF after 1 minute. Press the on/off button to turn on the screen.I can see the black screen only during measurement.•Check the LED light inside lens on the head part when you try to measurement. If you cannot see the light, please connect the customer service center.The image is not clear.•Tap the screen while capturing to focus. I cannot update the diagnosis application.•Check the network connection, the update process can be done after connect to Wi-Fi.
CAUTION UPON INSTALL & USEAdditional informationThanks for using the product of Aram HUVIS Co., Ltd.. The product undergoes strict quality management and inspection process before production and introduction to market. Product defect or trouble during warranty period is entitled to free repair. Please, fill out warranty and keep it with receipt to enjoy better service in the future. ▶Warranty Period14 MONTHS from the products arrival.▶Service Free of ChargeService is provided free of charge only if product defect occurs within 1 year from the date of purchase (within Warranty Period).▶Repair with Charge* Cases except for product defectIf service is requested due to the reasons except for defect, service fee may be charged. - Defect resulting from the mistreatment by the user- Defect resulting from the lack of caution (leakage or shock) or unauthorized repair or remodeling- Defect due to natural disasters such as fire, earthquake or floodModel Serial No.Date of Purchase Customer NamePlace of Purchase Contact InformationCaseServiceWithin Warranty Period After Warranty PeriodFunctional or operational defect which occurs under normal condition of use within 10 days after purchaseProduct replacementFunctional or operational defect which occurs under normal condition of use within 14 year after purchaseFree of chargeDefect which results from the mistreatment by the userPartial free repair Or Repair with charge Repair with charge
CAUTION UPON INSTALL & USEAdditional information1. HumidityDo not install the product in the place with rain leakage or of high humidity. If the product is leaking, it may cause damage or fire.2. RepairDo not disassemble or remodel the product because it may cause danger such as an electric shock. When a problem occurs, do not attempt to repair it. Instead, contact the seller.3. ElectricityDo not use electricity except for what is prescribed here. Using improper electricity may cause an electric shock or danger.4. Installation EnvironmentDo not install the product in a too hot or cold place. (Recommended Temperature : 15℃ ~ 35℃ )5. SunlightDo not expose the camera of the product to the sun or a direct ray of light. It may cause product damage6. Shock or VibrationDo not drop the product or give it a strong shock or vibration.7. If the product does not work properlyIf a problem occurs while using the product (unidentified noise, smell or smoke), stop using it and turn the power off and contact the seller.8. Dirt on LensMake sure that keep camera lenses clean and away from pollution. If it polluted by finger print or external dirt, cleanse it with cotton stick socked with 70% Ethyl Alcohol solution or use air blower to remove the dust. Those products are available at camera shop.9. For After-ServiceWhen any of the following occurs, turn the power off and have the product repaired at the place of purchase.i. Power Connector is damagedii. The product is leakingiii. Liquid is spilt over the product or it has alien substance.iv. Product does not work as indicated in this manual. (Attempting to operate the product against manual may cause more serious damage.)v. Product is dropped to the floor and seriously damaged.
World leader of skin & hair diagnosis systemRm.801 Byucksan Technopia, #434-6 Sangdaewon-dong, Jungwon-gu, Seongnam-city, Gyeonggi-do, KOREA 462-716TEL [82-31] 732.6320 FAX [82-31] 732.6330 E-MAIL info@aramhuvis.com WEBSITE www.aramhuvis.comAramo Smart NavigatorII‐100Aramo ProfessionalScannerII

Navigation menu