Aram Huvis API API User Manual API100

Aram Huvis Co., Ltd. API API100

User Manual

User ManualThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
ContentsC. System SettingsD. Program Settingsⅰ. Both Sidesⅱ. SettingsE. Applicationⅰ. Start Analysisⅱ. Full Analysisⅲ. View ModeCRMMoistureSebumPoreMelaninAcneWrinkleSensitivitySummary1235789101112131415161718F. Warranty19A. ComponentsB. H/W Parts※Notes on use・The images of this manual can be different with the actual things.・The information contained in this manual and future improvements are subject to change without notice.
ComponentsAPI 100ChargerManualBatteryUSB cableCradleSebum paper 1 boxMain body with skin lensCleaning cloth1A. Components
H/W PartsBoth Sides Battery coverLED light & lensMode up Mode downCaptureStart, Analysis, ResultExternal adaptor connectionPower on & off2B. H/W Parts - Both Sides
H/W Parts SettingsInsert the batteryInsert the battery and gently press the battery into place.Close the cover.12To turn on the powerPress and hold “Power” button."Indicate LED" starts twinkling in blue light.When it stops, the device is ready to use.12To turn off the powerPress and hold "Power" button."Indicate LED" will be turned off.123112323B. H/W Parts - Settings
Charger can be used for 110V & 220V. The default is 220V. Then 220V European type is disassembled and you can see the 110V-220V American type inside of the charger.Push the plug down to up at "Push" marked.123Choose the one you want to use and connect USB cable in adaptor.H/W PartsSettings1234 B. H/W Parts - Settings
System SettingsDownload & InstallPC UserGo to link on the browser as below.http://www.aramhuvis.com/download11Install the program.22Tablet device or Smartphone user iOS : Go to "App Store" and search "Solutionist" to download the program.Android : Go to "Google Play Store" and download it.5C. System Settings
System SettingsHow to connect with the programFirst of all, check the Wi-Fi name and password which is described at back side of battery cover.Wi-Fi name & password must be same and the format is "API_XXXX".Turn on the device.While turning on the device, prepare PC, Tablet, Smartphone to run the S/W.Once “API” device is turned on, please go to network setting to set up the Wi-Fi connection.!#$$$$%When above code is connected, run the program “Solutionist". To check working properly, please check the program and see the left below side.If it is correctly set up, you can see the orange light of Wi-Fi singal.123456789SSID: API_XXXXPW: API_XXXX6 C. System Settings
Program SettingsGeneral Settings Change the language, analysis mode and etc.1Analysis Settings Set up the skin type and analysis parameter.2Recommended Products Available for each analysis result.3AboutCheck the current version and update is available in Wi-Fi connection.47D. Program Settings
Touch “Analysis” to start.1ApplicationStart Analysis8 E. Application - Start Analysis
ApplicationCRMTake picture of customer's face with built-in cameraor use the picture you already have in device.4Check the customer information and analysis result list.3Among the customer lists, select the client to check or start analysis.Input the information. - full name, email address, gender and age group129E. Application - CRM
Press "capture" button and when you hear "beep" sound, please put the sensor onto your skin and wait until you hear "beep" sound again.1Check the result.To analyze next step, touch button.2ApplicationMoistureorTo analyze next storMoisture sensor10 E. Application - Moisture
ApplicationSebumU-zoneT-zoneCheck the result. To analyze next step, touch button.4Put the sebum paper onto the U-zone on the cheek, then press it for 2~3 seconds.1Place camera on the pink area and take picture. (U-zone)2Sebum paperSebum paperPut the sebum paper onto the T-zone on face, then press it for 2~3 seconds.Place camera on the pink area and take picture.(T-zone)3orTo analyze next steor11E. Application - Sebum
ApplicationPorePut the camera into the skin and touch button to analyze.2Touch button to activate camera mode.1Compare your image with 3 sample images.- Good- Normal- Bad4The result will be appeared to compare with age group.Check the result. To analyze next step, touch button.Touch "Compare" button to check the sample image.3orTouch button t 1ororto analyze.Th lt ill b3ororCompare your imaGd4Check the result. ToTouch "Compare" bor12 E. Application - Pore
The result will be appeared to compare with age group.Check the result. To analyze next step, touch button.Touch "Compare" button to check the sample image.ApplicationMelaninPut the camera into the skin and touch button to analyze.23Compare your image with 3 sample images.- Good- Normal- Bad4Touch button to activate camera mode.1orTouch button t 1ororThe result will beato analyze.3ororTouch "Compare" bCompare your imaGood4or13E. Application - Melanin
The result will be appeared to compare with age group.Check the result. To analyze next step, touch button.Touch "Compare" button to check the sample image.3ApplicationAcnePut the camera into the skin and touch button to analyze.2Compare your image with 3 sample images.- Good- Normal- Bad4Touch button to activate camera mode.1orTouch button to 1ororTheresultwillbeap3to analyze.ororTouch "Compare" bCompare your imagGood4or14 E. Application - Acne
The result will be appeared to compare with age group.Check the result. To analyze next step, touch button.Touch "Compare" button to check the sample image.3ApplicationWrinklePut the camera into the skin and touch button to analyze.2Compare your image with 3 sample images.- Good- Normal- Bad4Touch button to activate camera mode.1orTouch button t 1ororTheresultwillbeap3to analyze.ororTouch "Compare" bCompare your imaGood4or15E. Application - Wrinkle
ApplicationSensitivity4Put the camera into the skin and touch button to analyze.2The result will be appeared to compare with age group.Check the result. To analyze next step, touch button.Touch "Compare" button to check the sample image.3Compare your image with 3 sample images.- Good- Normal- Bad4Touch button to activate camera mode.1orTouch button to 1ororto analyze.Theresultwillbeap3ororTouch "Compare" bCompare your imagGood4or16 E. Application - Sensitivity
Available to check product image.3SummaryCheck the result.1Touch button or each parameter on pentagon graph.Once you select "Show Recommended Product", product image is appeared.217E. Application - Summary
1View ModeIn view mode, it is able to take pictures with capture button in many times.2The user can select analysis parameter to take picture. 3In one screen, you can see 4 different images maximum. 4The user can mark the defect or concern according to the image with note function.18 E. Application - View Mode

Navigation menu