Apple A1114 Bluetooth 1.2 Compliant Module User Manual 034 XXXX BT

Apple Inc. Bluetooth 1.2 Compliant Module 034 XXXX BT

User Manual

1 1 Apple Bluetooth Welcome to the world of Bluetooth. Your computer includes Apple Bluetooth technology that eliminates the need for many cables that traditionally connect devices together. Bluetooth enabled devices, such as computers, mobile phones, and handheld devices (PDAs), can connect to each other wirelessly at distances up to 10 meters (33 feet). This document provides information on how to • pair your Macintosh with a Bluetooth enabled mobile phone and connect to the Internet • exchange files between Bluetooth enabled devices Pairing Your Computer With a Bluetooth enabled Mobile Phone Before you can connect to the Internet using your Bluetooth enabled mobile phone, you need to pair your computer with the phone. Make sure your Bluetooth enabled mobile phone is on and ready to accept a pair. This is often called “discoverable” mode. 1 Open System Preferences and click Bluetooth. 2 Click the Devices tab, and then click Setup New Device. 3 Follow the onscreen instructions. Note: To access the Internet, you must have a Bluetooth enabled mobile phone and subscribe to data services from a wireless operator. Unless you subscribe to “always on” data services (such as GPRS), you will also need an account with an Internet service provider (ISP) to access the Internet. Check with your providers for more information.
2 DraftVersion Connecting to the Internet 1 Open Internet Connect, located in the Applications folder. 2 Click Bluetooth in the Toolbar, and choose a configuration from the pop-up menu. If there are no configurations, choose Edit Configurations from the pop-up menu, and enter the information you received from your provider, such as the phone number, user name and password. 3 Choose the model of your phone from the Modem pop-up menu. 4 Click Connect. Exchanging Files Between Bluetooth enabled Devices You can use the Bluetooth File Exchange application to exchange files between one or more Bluetooth enabled devices. You can also use Bluetooth File Exchange to browse remote devices.Make sure the devices you want to exchange files with are in discoverable mode. 1 Choose Send File from the Bluetooth menu in the menu bar. If the Bluetooth menu is not in the menu bar, open System Preferences, click Bluetooth, and select the “Show Bluetooth status in the menu bar from the Settings pane.” 2 Select the files you want to send and click Send. 3 Select a device from the Device list and click Send.If the device you want to send the file to is not listed, click Search to find Bluetooth enabled devices in range. 4 If you are asked for a passkey, enter one and click Respond. If the device receiving the files is prompted for a passkey, enter the same passkey on the receiving device and click Respond. 5 If the receiving device is prompted that it is receiving a file, click Accept to receive the file. Depending on the options selected, you may be asked if you want to open the file. For more information on Bluetooth, choose Bluetooth Help from the Help menu, or go to www.apple.com/bluetooth.
Communications Regulation Information FCC Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected. Radio and Television Interference The equipment described in this manual generates, uses, and can radiate radio-frequency energy. If it is not installed and used properly—that is, in strict accordance with Apple’s instructions—it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. You can determine whether your computer system is causing interference by turning it off. If the interference stops, it was probably caused by the computer or one of the peripheral devices. If your computer system does cause interference to radio or television reception, try to correct the interference by using one or more of the following measures: • Turn the television or radio antenna until the interference stops. • Move the computer to one side or the other of the television or radio. • Move the computer farther away from the television or radio. • Plug the computer into an outlet that is on a different circuit from the television or radio. (That is, make certain the computer and the television or radio are on circuits controlled by different circuit breakers or fuses.) If necessary, consult an Apple-authorized service provider or Apple. See the service and support information that came with your Apple product. Or, consult an experienced radio/television technician for additional suggestions. Important: Changes or modifications to this product not authorized by Apple Computer, Inc., could void the FCC Certification and negate your authority to operate the product.This product was tested for FCC compliance under conditions that included the use of Apple peripheral devices and Apple shielded cables and connectors between system components. It is important that you use Apple peripheral devices and shielded cables and connectors between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. You can obtain Apple peripheral devices and the proper shielded cables and connectors through an Apple-authorized dealer. For non-Apple peripheral devices, contact the manufacturer or dealer for assistance. Responsible party (contact for FCC matters only): Apple Computer, Inc., Product Compliance, 1 Infinite Loop M/S 26-A, Cupertino, CA 95014-2084, 408-974-2000. FCC Wireless Compliance The antenna used with this transmitter must not be collocated or operated in conjunction with any other antenna or transmitter subject to the conditions of the FCC Grant. Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations.Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Europe–EU Declaration of Conformity Complies with European Directives1999/5/EC.See www.apple.com/euro/compliance/ VCCI Class B Statement
© 2003 Apple Computer, Inc. All rights reserved. Apple, the Apple logo, and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and is used under license. 034-1234-APrinted in XXXX

Navigation menu