AnJieLun Electronic Techology ADSA11B 2.4GHz digital wireless camera User Manual

AnJieLun Electronic Techology Limited 2.4GHz digital wireless camera

user manual

2.4GHzdigitalwirelesscameraUser’sManualModel:ADSA11B,ADW280FCCID:T54ADSA11B
Brochure 1. Product description 1.1 Appearance 1.2 Key Description There are 10 keys and 1 switch on the receiver,one key on the camera. Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
1.3 Electrical Continuity 1.3.1 Just connect power adapter and the antenna to receiver/connect the power adapter to camera. 1.3.2 Connect the AV cable To receiver and TV. 2．Operation desciption 2.1 Scan Mode（调节音量、亮度） In this mode,user can control Sound by pressing ,and control Brightness by pressing ;If put A SD card in the receiver,press Will start recording,and press It twice will stop;user can view The data in SD card by pressing Key. User can get to one channel by pressing . 2.2 Graphical User Interface User can enter this mode by pressing ,and pressing To choose the icon,pressing for sure,and choose Exit icon to quit. Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
2.2.1 Pairing Menu Camera need to be paired with Receiver to start working. 2.2.2 Record Menu User can set the time stamp on/off Or enable SD card overwrite Function in this mode. 2.2.3 Playback Menu User can view the data in SD card in this mode. 2.2.4 Setting Menu User can set time,recording Time, contrast, saturation etc. In this mode. Generated by Foxit PDF Creator © Foxit Softwarehttp://www.foxitsoftware.com For evaluation only.
IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Care should be taken that, in order to comply with FCC OET 65 Health Requirements, please always make sure that keep the device 25 cm away from the body while it is working. 

Navigation menu