Amac Tek HAN-250X MP3 Player User Manual HAN 250X EN
Amac Tek Co., Ltd. MP3 Player HAN 250X EN
UserManual.wiki
>
Amac Tek
>
HAN 250X User Manual
users manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![■Software installation guide for additional functionsPlease install an additional utility program which is used to convertfrom TVF file to WAV file, download the font and upgrade firmware.▶How to install Software Program1. Insert the installation CD, and the following pictures areappeared. (If it is not run automatically, please click on‘HAN-250X-Installer.exe’ file in the CD-ROM for the manualinstallation.)2. Please follow the installation guide when it is run automatically.Select the folder to install. Then press [Next] Button in the order.■PC System Requirements- Windows 98SE / ME / 2000 / XP - 20MB Hard Disk Space or higher- CD-ROM Driver- PC for USB Port supported■Required Software by OS(Operating System)Required Enviroment for users- 6 -- 5 -▶To install the program in Windows 98SE / MEWindows 98SE / ME users should install the program in InstallationCD.※If users don't install the program of Installation CD, computerdoesn't recognize the player as a removable disk and it can'tconvert from TVF to WAV, download fonts, or upgradefirmware. Users should surely install the program of Installation CD.※Player doesn't support Windows 98 Original version.※If PC doesn't recognize the removable disk normally even afterinstalling the program, please refer to page #34, or FAQ inwebsite www.amac21.com.▶To install the program in Windows 2000 / XPIt is recommended that Windows 2000 / XP users install theprogram of Installation CD.※Even if users don't install the program of Installation CD inWindows 2000 / XP, computer can recognize the player as aremovable disk automatically.※However, the installation is still required for converting fromTVF to WAV, downloading fonts, and upgrading firmware.※If Windows 2000 users don’t have Windows 2000 Service Pack3 in the computer, users have to install Service Pack 3. (Pleaserefer to FAQ in website www.amac21.com)※Windows 2000 / XP users should log in PC with the account byAdministrator.250 영문 메뉴얼 2004.3.30 2:43 PM 페이지5](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-6.png)
![3. Please restart your computer to complete installation.To Upload/Download■To connect to PCTo download MP3 files from PC to HAN-250X, connect the providedUSB cable between PC and MP3 Player. Then Windows explorerincluding ‘config.sys’file is appeared in the PC. If users remove thisconfig.sys file from Player by using Windows explorer, all of basicsetting values defined by AMAC will be changed because that‘config.sys’file contains all of setting values defined by user. ■To Upload/Download the files①Removable disk drive is appeared in [My Computer] when theplayer is connected to PC. And then [USB Connect] is displayedon the LCD of the player.②Users can copy the files saved in PC to the folder created inremovable disk drive.11※Reference :1. Users can create the desired folders for userconvenience. For instance, Music, Voice,Pictures, Business, and so on.11※ Reference : 2. Users can see data files (.doc, .xls, .html, .pdf,etc.) through Manager program in the PC onlywhile users can see music files in the playerdirectly. - 8 -- 7 -250 영문 메뉴얼 2004.3.30 2:43 PM 페이지7](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-7.png)
![■To FormatPlease format the memory after selecting the Removable Disk Driveand click on ‘FORMAT’in ‘FILE’Menu as below procedures.※Caution : If formatted, all data stored in the Memory will bedeleted. Therefore please back-up all of data beforethe format.※It is strongly recommended to use [Format Memory] function ofthe player because users can save the waiting time(the bootingtime) when the player is turned on. If users format the playerfrom PC, the booting time may last longer.■To disconnect from PC (Windows 98SE / ME) (Please refer to Page #36)■To disconnect from PC (Windows 2000 / XP)Disconnection from PC should be done as following procedures toprevent from file damage.①Please double click the green arrow icon at the bottom of rightside as below pictures.- 10 -(Please refer to page #21 [Format Memory])③Uploading is on the contrary of downloading.If the player malfunctioned because of improper disconnection,please format the memory to return to normal condition.- 9 -250 영문 메뉴얼 2004.3.30 2:43 PM 페이지9](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-8.png)
![Feature & Others- 12 -To listen to MP3/WMA Music Files■To listen to music▶To turn the POWER ON/OFF, PLAY/STOPThe power will be turned on when NAVIGATION Key(▶l l ) i spressed over two or more seconds and then press NAVIGATIONKey(▶l l ) once again to play the music.Press NAVIGATION Key(▶l l ), and playerstops playing. Press NAVIGATION Key(▶l l )for two or more seconds while the playerdoes not play. Then, the power is switchedoff. (※ Notice : The booting time may be different according to thenumber of the folders and files saved in the player.)▶To control VolumePlease move M(MENU) Key to ‘VOL+’(to LEFT SIDE) for vol-ume up. And move M(MENU) Key to ‘VOL-’(to RIGHT SIDE)for volume down. The Volume can be controlled in the range of00~30.▶Repeat function for the selected Area (A-B)The desired area can be played repeatedly in the playback file. Please move NAVIGATION Key(▶l l ) t o‘A-B’ at the point of the start(A) and moveNAVIGATION Key(▶l l ) to ‘A-B’ at thepoint of the end(B). ②Please select USB device and click on [STOP] Button. ③Please disconnect the player after click on [OK] Button.(※ Notice : The files which are saved in the Memory may bedamaged in case of unsafe disconnection.)- 11 -250 영문 메뉴얼 2004.3.30 2:43 PM 페이지11](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-9.png)
![▶Equalizer (EQ) Setting UpSelect ( )Icon and move M(MENU) Key to right or left. Thenthe 5 EQ modes will be shown as below. Normal Classic Jazz Rock M-Bass USER※Please refer to page #24[USER EQ].▶Repeat Setting UpSelect ( )Icon and move M(MENU) Key to right or left. Thenthe Repeat Setting up will be shown as below.NOR(Normal) S1(Select One) All(ALL) RAN(Random)※Reference: In case of selecting ‘ALL’ and ‘RAN’ in the folder,only files within that folder are played.▶Playback Speed ControlSelect ( )Icon and move M(MENU) Key to right or left. Thenthe Playback Speed Control Setting up will be controlled up to 6steps. (Normal[Nor], Fast[+I1], Slow4[-I4], Slow3[-I3], Slow2[-I2],Slow1[-I1])▶Record / Encode Setting UpPlease set up MIC( ) and LINE( ) input as users conve-nience using the function of MENU when encoding. Please pressM(MENU) Key and then select (0 0 0 0 0) Icon. When the voicerecording is desired, please move M(MENU) Key to right and leftand select MIC(0 0 0 0 0) Icon when the direct encoding is desired,please select LINE(00000) Icon.- 14 -- 13 -Then, the selected section is repeated. To release the selected sec-tion, move NAVIGATION Key(▶l l )to ‘A-B’ again.※Notice : 1. Repeat function can be applied for not only a filebut also several files, too.※Notice : 2. Repeat function is not available in case REPEATMODE is set up as a ‘RAN’(Random).▶HOLD With this function, you can prevent HAN-250X from malfunctionoccurred in the disordered place. When HOLD button is placed inthe ON Position (HOLD ㅣ), all buttons on the player are notworking. However, POWER ON is available on the present status ofPOWER OFF.■MENU FunctionHAN-250X has a function of M(MENU) Key for user convenience.Press M(MENU) Key, and icons for setting up functions will be dis-played on LCD screen (EQ REPEAT PLAYBACK SPEEDCONTROL RECORD SELECTION(Voice/Line)). Each timeusers press MENU Key, it moves EQ REPEAT PLAYBACKSPEED CONTROL RECORD SELECTION in regular sequence.If no movement occurs more than 5 seconds, it automatically returnsto the previous status. To set the each function, move M(MENU) Keyto right or left. 250 영문 메뉴얼 2004.3.30 2:43 PM 페이지13](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-10.png)
![Feature & Others- 18 -To listen to FM Radio & record at the real timePlease move NAVIGATION Key(▶l l ) to ‘FM’shortly to move to FM Mode.(※ Notice : Earphone provided should be inserted into the player toreceive FM frequency because the earphone works as anantenna.)■To preset frequency by Auto ScanMove NAVIGATION Key(▶l l )to ‘FM’ to enter FM Radio.Then, press M(MENU) Key two or more seconds to search and saveup to 15 channels automatically(PRESET01~PRESET15).■To save frequency by ManualIn case it may happen that the saved frequencies are not very well set,the desired frequencies can be found and saved by manual as follows:- Press M(MENU) Key once, and the saved frequencies are released.Move NAVIGATION Key(▶l l ) to left(◀◀) or right(▶▶) to movethe desired frequency. - Press NAVIGATION Key(▶l l ), and [PRESET SAVED] is displayedon LCD which means the desired frequency is saved.- Play the CD Player or Cassette Player and press REC(●) Button onthe player to start the recording.- Press REC(●) Button again to stop the recording.The recorded files will be saved from LINE-001 in the ENCODINGfolder in sequence.(※ Reference : Users need to set up the best tone quality of the otheraudio devices because tone quality of the recordedfile depends on tone quality of the other audiodevices actually.)■To listen to the recorded fileThe playback of the all recordings is the same as listening to themusic.- 17 -R e f e r e n c e1. VOICE Recording File displying on LCD: VOICExxx2. Direct Encoding File displaying on LCD: LINE-xxx3. FM Recording File displaying on LCD: RADIOxxx250 영문 메뉴얼 2004.3.30 2:43 PM 페이지17](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-12.png)
![Feature & OthersTo set the MODE Function- 20 -The player is made for users to set up the basic mode as user conve-nience. Turn on the power and press MODE Button shortly to enterMODE function Setting Up. To return, press MODE Button again.(※ Reference : Entering MODE function is not available at the sta-tus of FM RADIO. Please get out of FM RADIOMode once and then enter into MODE function.)■Major MODE function Setting Up◉Mode related to Memory Setting Up- Memory Information : Memory use status- Mode related to Memory Management Setting UpFormat Memory, Low Format, Erase All, Erase 1◉Mode related to Recording Setting Up- MPEG Setting Up, Sample Frequency Setting Up, Bitrate Setting Up, ◉Mode related to User Definition- FM Band Select- USER EQ- Backlight Time◉Firmware Upgrading Mode Setting UpPictures for All MODE Functions- 19 -■To record FM Radio Users can record the desired FM Radio while listening as follows:- Press REC(●) Button while listening to start the recording and then- Press REC(●) Button again to stop the recording.(※ Reference : 1. FM Radio recording files are saved fromRADIO001 in the ENCODING folder in sequence. (※Reference :2. Under FM Radio recording, files are recorded onthe basis of 96Kbps / MPEG2 Layer 3 regardlessof user’s setting mode. ■To set up FM BandIt is function of worldwide FM frequency setting up. Please refer topage #23 [FM Band Select].(※ Reference : US Band is default mode at first)[To Start Recording] Setting up Band※US Band : USA, KOREA, CHINA and the other areas(87.5 ~ 108 MHz)※JAPAN Band : JAPAN (76 ~ 90 MHz)※EU Band : EUROPE[To Release Preset] [To Save By Manual]250 영문 메뉴얼 2004.3.30 2:43 PM 페이지19](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-13.png)
![- 22 -It is the function to erase all files.- Press MODE Button shortly to enter MODE Setting Up first.- Then, move NAVIGATION Key(▶l l ) to left(◀◀) or right(▶▶) tomove to Erase All.- Press NAVIGATION Key(▶l l ) , and all saved files are deletedwhile ‘All Erasing!!’ is appeared on LCD display.◉Erase 1It is the function to erase one file. - Press MODE Button shortly to enter MODE Setting Up.- Then, move NAVIGATION Key(▶l l ) to left(◀◀)or right(▶▶) tomove to Erase 1.-Move M(MENU) Key to ‘VOL+’(to LEFT SIDE) / ‘VOL-’(RIGHTS I D E ) to select the file to delete file in the player. - Then press NAVIGATION Key(▶l l ) to delete the desired filewhile ‘Erasing!!’ is appeared on LCD display.▶Mode related to Recording Setting Up◉MPEG ModeThe MPEG Mode setting up consists of 3 types as follows:MPEG1 layer3 →MPEG2 layer3 →TVFMove M(MENU) Key to ‘VOL+’(to LEFT SIDE) / ‘VOL-’(toRIGHT SIDE) to look for MPEG Mode and then press NAVIGA-TION Key(▶l l ) to select desired one among 3 types of MPEGModes. - 21 -▶Memory Information◉Memory use status- Total Flash Memory Capacity / Free space(※ Reference : An actual usable memory in the player is smallerthan an original memory because memory is usedby the system of the player.)▶Mode related to Memory Managemant Setting Up◉Format MemoryIt is function of initializing the memory. - Press MODE Button shortly to enter MODE Setting Up first.- Then press NAVIGATION Key(▶l l ) in the player, and ‘YES orNO?’ is appeared on the LCD.- Press NAVIGATION Key(▶l l ) again to format, and "Formatting!!"is appeared. ◉Low FormatIt is function of checking Bad Block in detail. The process is thesame as the above [Format Memory].(※ Reference : Please refer to page #36, #37 [Low Format].)◉Erase All250 영문 메뉴얼 2004.3.30 2:43 PM 페이지21](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-14.png)
![◉Sample Freq Setting UpMove M(MENU) Key to ‘VOL+’(to LEFT SIDE) / ‘VOL-’(toRIGHT SIDE) to look for desired SAMPLE FREQUENCY andthen press NAVIGATION Key(▶l l ) to select desired one amongSample Frequencyies. The Sample Frequency depends on theMPEG Mode as TABLE [1]: ◉Bitrate SettingMove M(MENU) Key to ‘VOL+’(to LEFT SIDE) / ‘VOL-’(to RIGHTSIDE) for looking for desired Bitrate and then press NAVIGA-TION Key(▶l l ) to select desired one among Bitrate. The Bitratedepends on the MPEG Mode as below.TABLE [1]▶Mode related to User Definition◉FM Band SelectIt is function of worldwide FM frequency setting up.Move M(MENU) Key to ‘VOL+’(LEFT SIDE) / ‘VOL-’(RIGHTSIDE) to look for desired FM Band and then press N A V I G A T I O NKey(▶l l ) to select desired one of among US Band JAPAN BandEUROPE Band.◉USER EQEach song can be set through the USER EQ function which has 5channels in the ranges of 20Hz ~ 20KHz. It can be adjustable in theranges of -5dB ~+5dB by user.Please press M(MENU) Key to move to each of blocks. And moveM(MENU) Key to ‘VOL+’(LEFT SIDE) and ‘VOL-’(RIGHTSIDE) to set the desired ‘dB’ within the block.◉Backlight TimeUsers can set up desired Backlight time and turn off Backlight. ▶Mode related to Firmware UpgradeIt is the function to upgrade the firmware. Please refer to page #30[Firmware Upgrading].- 24 -B i t r a t e ( K b p s )10 Steps in range of 32~22415 Steps in range of 96~19214 Steps in range of 112~25615 Steps in range of 96~16017 Steps in range of 64~16018 Steps in range of 56~16012 Steps in range of 4.7~5.9Sample Freq(KHz)3 24 4 . 14 81 62 2 . 0 52 48MPEG MODEMPEG1 layer3MPEG2 layer3T V F- 23 -250 영문 메뉴얼 2004.3.30 2:43 PM 페이지23](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-15.png)
![- 25 -Feature & Others3. Selecting WAV file name to save- Picture [1-6] is appeared when clicked on [Save WAV] Button toappoint the place for saving as Picture [1-5]. Select file name andthe place to save and then click on [SAVE] Button. 4. Conversion- Press the [TVF →WAV] Button to convert as below Picture[1-7]. Then, Picture [1-8] is appeared and disappeared when it isdone.- 26 -Picture [1-5] Picture[1-6]Picture [1-7] Picture[1-8]How to use the UTILITY program■Converting format from TVF to WAV1. Converting format from TVF to WAV- Click on the Icon ( ) as below [Picture 1-1] or select [TVF →WAV] in the [Menu] as below [Picture 1-2]. Users can chooseeither way.2. How to convert from TVF File to WAV file- Picture [1-4] is appeared when clicked on [Open TVF] Button aspicture [1-3]. Select TVF file in the PC which was previousdownloaded from MP3 Player(HAN-250X). And then, pleaseclick on [Open] Button.Picture [1-1] To select by Button Picture[1-2] To select by [Menu] Picture [1-3] Picture[1-4]250 영문 메뉴얼 2004.3.30 2:43 PM 페이지25](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-16.png)
![- 28 -4. [USB Connect] is activated shown on the Bottom left corner asabove Picture [2-1] and not activated on the Bottom left corner asabove Picture [2-2].5. And, [Menu] on the MENU BAR related to USB Connection isnot activated when the player is not connected to PC properly.▶How to select the fonts downloading6. Click on the Icon (0000) to download fonts as shown on Picture[2-3] or, click on [Font Download] Button the MENU BAR todownload fonts as shown on Picture [2-4]. Users can chooseeither way.7. Click on [Font Download] Button to start the downloading asshown on Picture [2-5]. 9 .Please select Font file in the PC which was previous downloadedfrom AMAC website w w w . a m a c 2 1 . c o m . And then, click on[Open] Button. Picture [2-3] To select by Icon Picture [2-4] To select by [Menu]- 27 -■Font Download※ When do users download fonts?The music title is displayed on LCD using the external font pro-vided by the player. When the music title is not properly displayedor the font is obsolete, users can download the fonts from the web-site www.amac21.com.※How to Download the Fonts1. To download, press MODE Button shortly in the player.2. Move NAVIGATION Key(▶l l ) to find [FW Upgrade]. Then pressNAVIGATION Key(▶l l ) ,and [Not Connect] is appeared on LCD.3. After that, connect the player to PC, and [FW UpgradeConnected] is appeared on LCD. Refer to the followings:▶Pictures when the player is connected to PCPicture [2-1] Picture [2-2]Connected Properly picture Connected Improperly picture250 영문 메뉴얼 2004.3.30 2:43 PM 페이지27](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-17.png)
![- 30 -■Firmware Upgrading1. The newest firmware is uploaded on the website w w w . a m a c 2 1 . c o m .2. Users can see present firmware version by checking initialscreen of LCD when pushing MODE Button shortly. 3. Power the player on and then press MODE Button to enter [FWUPGRADE].4. Move NAVIGATION Key(▶l l ) to find “FW Upgrade”. Thenpress NAVIGATION Key(▶l l ) , and “Not Connect” is appearedon LCD.5. Click on the program related to the newest firmware on your PCscreen.6. Disconnect USB cable from player when finishing firmwareupgrading.▶To upgrade firmware1. Click on the Icon ( ) to upgrade firmware as shown on Picture3-1 or, click on the [Menu] on the MENU BAR to upgradefirmware as shown on Picture [3-2]. Users can choose either way.Picture [3-1] To select by Icon Picture [3-2] To select by [Menu]8. Picture [2-7] shows that the downloading is progressing. 9. Press [OK] Button as picture [2-8] after finishing FontDownloading.10. Turn the player power off and turn it on again. The program hasto be restarted after the Font Downloading, and retry the playPlug-In and Out.(※ Caution : Please do not plug-out the player during FontDownloading. It will cause the serious problem.)- 29 -Picture [2-5] Picture [2-6]Picture [2-7] Picture [2-8]250 영문 메뉴얼 2004.3.30 2:43 PM 페이지29](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-18.png)
![- 32 -4. Please click on [OK] Button to complete.5. Turn the player power off and turn it on again.※Reference :If you plug-out the player during Font D o w n l o a d i n gand Firmware Upgrading, please try to do f o l l o w i n gprocedures.1. Move HOLD Key to ‘HOLD ON’ on the status of‘POWER OFF’. 2. Connect USB cable with player pushing MODEButton tightly.3. After that, double click the Utility Program(“HAN-250X UTIL”) and upgrade the firmware again.Picture [3-7]- 31 -2. Click on [Firmware Upgrade] Button as shown on Picture [3-3]and select firmware file which was downloaded from AMACwebsite www.amac21.comas shown on Picture [3-4].3. The old firmware is being removed as shown on Picture [3-5].The new firmware is being downloaded as shown on Picture[3-6].Picture [3-3] Picture [3-4]Picture [3-5]Removing Old FirmwarePicture [3-6]Downloading New Firmware 250 영문 메뉴얼 2004.3.30 2:43 PM 페이지31](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-19.png)
![Feature & Others①If the player is properly connected to PC, click on [START] but-ton of Windows and select [CONTROL PANEL] [SYSTEM][DEVICE MANAGEMENT] in sequence. ②Double click on [Universal USB Controller] and check whetheror not the AMAC USB Driver exists. ③Select and delete AMAC USB Driver or the USB Driver of otherdevices if they are marked with a question mark (?), an exclama-tion mark (!) or [Unknown Device].④Pull out only the USB cable from the player, but leave alone theUSB cable connected to the USB port on PC. Then, please rebootthe PC.⑤Connect the USB cable to the player after rebooting, and the USBdriver is automatically detected.※ReferenceWhen same problem happens, please install CD to set up USBDriver manually as follows: ※1. Warning message is appeared as Picture [4-1] when USBDriver doesn’t set up in Windows 98SE / ME.- 34 -1. PrecautionsThe followings are precautions that you should keep in mind. Anyviolation of the following precautions may cause damage of product. ①If the player will not be operated for a prolonged period, removethe battery to avoid possible damage caused by electrical leakage.②To avoid static electricity, if possible, please, avoid operating theplayer in extremely dry environment.③Do not drop the player, which probably cause battery fall off ordamage its surface.④The player should be kept in areas free from extreme temperaturechanges, moisture and dust.④(Do not leave the player over 70℃and below 5℃)⑤Do not polish with a chemical material (Benzene, Thinner,Organic solvent).⑥Do not expose in many hours on a direct ray of light or closedplace from heat appliance.⑦If the player stops running under proper operation, please reset itby taking out battery.⑧Do not disassemble a product unnecessarily except for the AMACmaintenance man.2. How to troubleshootWhen USB driver is not properly installed after the player is connect-ed to PC, please follow as below.◈Information related to USB Driver installation (For only Window98SE/ME users)◈When the message on PC shows that the driver can not be openedafter the player is connected to PC.Others and Trouble Diagnosis- 33 -Picture [4-1]An Error in recognizing USB Driver250 영문 메뉴얼 2004.3.30 2:43 PM 페이지33](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-20.png)
![■To disconnect from PC(Windows 98SE / ME)Disconnection from PC should be done as following procedures toprevent from file damage.- Click on [START] Button of Windows and select [CONTROLPANEL] [SYSTEM] [DEVICE MANAGEMENT]. And then,disconnect USB Cable from PC after removing ‘HAN-250XWin98SE/ME USB MASS Storage Driver’.■Low Format▶What is Low Format?It is function of initializing the memory by deleting all data com-pletely and constituting the track and sector. Thus, Low Format issubstantial initializing Flash Memory in the player. ▶When ‘Low Format’ is needed :1. In case download speed is getting slow than before.- Please arrange available 'Memory Block' in order.2. In case file & folder and sound is broken during playback.- It occurs when users use unusable BAD Block by (normal) format.- 36 -Picture [5]- 35 -Picture [4-2] Installing USB Driver by manualPicture [4-3] Setting up place to install USB DriverPicture [4-4] Completing to install USB Driver by manual250 영문 메뉴얼 2004.3.30 2:43 PM 페이지35](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-21.png)
![3. In case Format is failed even though users tried to format theMemory- Deleted information is showed in the Window.▶The way to format the Memory by ‘Low Format’- Please move to ‘Low Format’ by using NAVIGATION Key(▶l l )tol e f t(◀◀) or right(▶▶) after pressing NAVIGATION Key shortlyto enter MODE Setting Up first.- Then, press NAVIGATION Key(▶l l ) in the player, and ‘YES orNO?’ is appeared on the LCD. And then press NAVIGATIONK e y (▶l l ) again to format the Memory, and ‘Formatting!!’ isappeared and processed.(※ Notice : It takes 5 to 10 minutes for Low Format in case of128MB. All of data will be deleted when users makeplayer power off in the process of Low Format. In thiscase, users have to process Low Format again.)- 37 -8 Mbps35X80X15mm / 43g (Battery excluded) USB 1.110 Hours1.5V X 1EA(AAA type)128 / 256 / 512MBHAN-250XMax. 8 Hours(128MB, 32Kbps)Model No.Max. 8 Hours(128MB, 32Kbps)Voice Recording TimeDirect Encoding TimeMax. 3 Hours(128MB, 96Kbps)FM Encoding TimeDownload SpeedInterface PortSize / WeightPlaying TimeB a t t e r yM e m o r y[Specifications of Product]M E M O250 영문 메뉴얼 2004.3.30 2:43 PM 페이지37](https://usermanual.wiki/Amac-Tek/HAN-250X/User-Guide-415654-Page-22.png)