Altec Lansing M402TX Wireless Snooze Remote User Manual part 1

Altec Lansing, LLC Wireless Snooze Remote part 1

Contents

user manual part 1

Altec Lansing FPO NAME M402/M402SR Digital Speaker System and Alarm Clock for iPod User Guide
iiWelcomeThank you for purchasing the Altec Lansing FPO NAME digital speaker system. Designed specifically to work with your iPod, this system provides high-quality audio and radio performance that brings out the best in your music. This Altec Lansing speaker system is designed to work with:• iPodtouch • iPodwithvideo• iPodnano(3rdgeneration) • iPodnano(1stgeneration)• iPodclassic • iPodwithcolordisplay• iPodnano(2ndgeneration) • iPodminiPlease carefully read this User Guide for instructions on setting up and using your FPO NAME speaker system. Prior to installing or operating the Altec Lansing FPO NAME speaker system, refer to the end of this guide for important product safety information.Getting AssistanceAltec Lansing Technical Support is ready to assist you. You can find answers to frequently asked questions, ask a question using email, receive service over the Internet or speak directly with a representa-tive.Call1-866-570-5702orvisitwww.alteclansing.com.Registering Your ProductVisit www.alteclansing.com to register your product online, so we can provide you with the best possible service and technical support.FCC ComplianceChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubject to the following two conditions:1)Thisdevicemaynotcauseharmfulinterference,and2)Thisdevicemustacceptanyinterferencereceived,includinginterference that may cause undesired operation.
1CAUTIONTopreventelectricshockdonotusethis(polarized)plugwithanextensioncord,receptacleor other outlet unless the blades can be fully inserted to prevent blade exposure.WARNINGTo reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.IMPORTANT SAFETY INSTRUCTIONS 1. Readtheseinstructions. 2. Keeptheseinstructions. 3. Heedallwarnings. 4. Follow all instructions. 5. Donotusethisapparatusnearwater–Thisapparatusshallnotbeexposedtodrippingor splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus. 6. Cleanonlywithdrycloth. 7. Donotblockanyventilationopenings.Installinaccordancewiththemanufacturer’sinstructions. The apparatus should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings. The apparatus must not be placed in a built-in installation, such as a closed bookcase or cabinet that may impede the flow of air through the ventilation openings. Ventilation should not be impeded by covering the openings with items such as newspapers, tablecloths, curtains, etc. 8. Donotinstallnearanyheatsourcessuchasradiators,heatregisters,stoves,orotherapparatus(includingampliers)thatproduceheat. 9. No naked flame sources, such as lighted candles, should be placed on the apparatus.10.Donotdefeatthesafetypurposeofthepolarizedorgrounding-typeplug.Apolarizedplug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.11.Protectthepowercordfrombeingwalkedonorpinched–particularlyatplugs,convenience receptacles, and the point where they exit from the apparatus.12.Donotinstallinanareathatimpedestheaccesstothepowerplug.Disconnectingthepower plug is the only way to completely remove power to the product and must be readily accessible at all times.13.Powersource–Useonlypowersuppliesofthetypespeciedintheoperatinginstructions or as marked on the appliance. If a separate power supply is included with thisapparatus,donotsubstitutewithanyotherpowersupply–useonlymanufacturer-provided power supplies.14.Unplugthisapparatusduringlightningstormsorwhenunusedforlongperiodsoftime.15.Referallservicingtoqualiedservicepersonnel.Servicingisrequiredwhentheapparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. For service, refer to qualified service personnel, return to the dealer, or call the Altec Lansing service line for assistance.16.Forproductsthatincorporatebatteries,pleaserefertolocalregulationsforproperbattery disposal.17.Onlyuseattachments/accessoriesspeciedbythemanufacturer.18.Useonlywiththecart,stand,tripod,bracket,ortablespeciedbythemanufacturer or sold with the apparatus. When a cart is used, use cautionwhenmovingthecart/apparatuscombinationtoavoidinjuryfrom tip-over.Safety InformationThe lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.Caution: To prevent the risk of electric shock, do not removecover(orback).Nouser-serviceablepartsinside.Referservicingtoqualiedservicepersonnel.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operatingandmaintenance(servicing)instructionsintheliterature accompanying the appliance.
2ContentsSafety Information .................................................................................................................................................................................. 1Package Contents .................................................................................................................................................................................. 3Getting Started .......................................................................................................................................................................................4Placing and Removing iPod Inserts ....................................................................................................................................................... 5Speaker Features and Indicators ...........................................................................................................................................................6Speaker Controls .................................................................................................................................................................................... 7Enhanced Remote Features ................................................................................................................................................................... 9Wireless Snooze Remote Features (M402SR model only) ...................................................................................................................11Listening to Your iPod ..........................................................................................................................................................................12Charging your iPod ...............................................................................................................................................................................12Listening to the FM Radio .................................................................................................................................................................... 13Listening to a Non-docking iPod or Other Portable Audio Device ....................................................................................................... 14Mood Light ........................................................................................................................................................................................... 15Setting the Clock Display .....................................................................................................................................................................16Setting the Alarm ..................................................................................................................................................................................18Setting the Sleep Timer ........................................................................................................................................................................ 20Maintaining Your Speaker System .......................................................................................................................................................20Troubleshooting ....................................................................................................................................................................................21Warranty ............................................................................................................................................................................................... 24Customer Service ................................................................................................................................................................................. 24
3Package ContentsAltec Lansing FPO NAME speaker systemPower supplyEnhanced remoteFM radio antennaWirelesssnoozeremote(M402SRmodelonly)Snoozeremotereceiver(M402SRmodelonly)User Guide and Quick Connect InstructionsiPod insert set
4Getting StartedHow to Install the Backup BatteryThis Altec Lansing FPO NAME speaker system uses a backup battery system to provide continuous clock settings in the event of a power failure. Withthebackupbattery(notincluded)installed,ifapowerfailureoccursor the AC cord is accidentally disconnected, the display will not remain lit and the alarm will not function, but the current time will be temporarily maintained. Otherwise, you must reset the time and alarm settings.1 Make sure the AC adapter is connected.Your settings may be lost during battery installation if the AC adapter isn’t connected.2 Open the battery compartment cover.The compartment cover is located on the bottom of the system.3 Insert one 9-volt battery (not included).Besuretocheckthatthepolarity(+and–endsofthebatteries)matches the illustration inside the battery compartment. Altec Lansing recommends the use of alkaline batteries for longer life.4 Close the battery compartment cover.How to Install the AC Adapter1 Connect the AC adapter cable plug into the speaker system’s jack. The jack is located on the back of the system.2 Plug the AC adapter into the wall outlet.How to Install the Enhanced Remote BatteryTheenhancedremotebattery(included)isnot installed at the factory. To install the battery, follow the steps below:1 Pull out the battery holder.The battery door is located on the lower end of the remote. Simply pull the tab to open the battery holder.2 Position the battery (included) so it sits in the battery holder correctly.Makesurethepolarity(the+and–sidesofthebattery)iscorrect.3 Replace the battery door.NOTE Please discard used batteries properly.ANTENNASNOOZEREMOTECLOCKAU XDCSNOOZEREMOTEANTENNAFMCLOCKAUXDC
5Placing and Removing iPod InsertsYour Altec Lansing FPO NAME speaker system includes removable inserts for today’s popular iPod models. These inserts ensure that your iPod properly fits in the speaker system’s dock. As new iPod models are introduced, new inserts will be made available to customers. You may also use the inserts supplied with your iPod or available for purchase at www.apple.com.How to Place an Insert1 Select the correct insert for your iPod.Using the correct insert ensures a proper fit for your iPod.2 Gently press the iPod insert into the dock.Now you can carefully place your iPod into the dock.NOTE Your iPod cannot be in a case or a “skin.”How to Remove an Insert1 Remove your iPod.2 Grip the insert and pull gently upward.
6Speaker Features and IndicatorsUniversal docking station for iPodVolume decrease buttonMood light buttonSource buttonPower buttonPlay/Snooze/PausebuttonSnoozebarPause buttonVolume increase buttonTrack back buttonTrack forward buttonAlarm1buttonAlarm2buttonLCD display
7Speaker ControlsTurn on your speaker system Ensure the AC adapter is connected to the system and plugged into the wall. See the Getting Started section for more information. Press the button.Turn off your speaker system Press the button. Whenever you are finished using your speaker system, please remember to turn it andyouriPodorotherMP3playerofftoconserveelectricity.Change audio source Press the button to cycle through and select the audio source: iPod, FM radio or AUX IN.Play a track from your iPod In iPod mode, press the button. See the Listening to Your iPod section for more information.Pause your iPod In iPod mode, Press the button.Turn up the volume PresstheVOLUMEINCREASEbutton.Turn down the volume PresstheVOLUMEDECREASEbutton.Skip to the beginning of the current song on your iPod In iPod mode, press the button.RewindthecurrentlyplayingtrackonyouriPod In iPod mode, push and hold the button.Skip to the beginning of the next song on your iPod In iPod mode, press the button.Fast-forward the currently playing track on your iPod In iPod mode, push and hold the button.Tune radio stations In FM radio mode, use the and buttons. See the Listening to the Radio section for additional information.
8Scan radio stations In FM radio mode, press and hold the or button. See the Listening to the Radio section for additional information.Listentoanon-dockingiPodorMP3player See the Listening to a Non-docking iPod or Other Portable Audio Device section for specific information on using devices attached to your speaker system’s AUX IN connector.Turn on the mood light Press the MOOD button. See the Mood Light section for more information.Set the clock See the Setting the Clock Display section for detailed instructions on setting the clock.Set the alarm See the Setting the Alarm section for instructions on setting the alarms.Turn off the alarm PresstheALARM1orALARM2buttonwhenthealarmissounding.Snoozefor5to60minutes(user-denable) Press the SNOOZE button when the alarm is sounding. See the Setting the Alarm section to learn how to setthesnoozeduration.Speaker Controls
9IR Enhanced Remote FeaturesThe enhanced remote lets you operate many functions of your Altec Lansing FPO NAME speaker system:Turn on your speaker system Press the button.Turn off your speaker system Press the button.Change audio source Press the button to cycle through and select the audio source: iPod, FM radio or AUX IN.Play a track from your iPod In iPod mode, press the button. See the Listening to Your iPod section for more information.Pause your iPod In iPod mode, Press the button.Turn up the volume PresstheVOLUME+button.Turn down the volume PresstheVOLUME–button.Skip to the beginning of the current song on your iPod In iPod mode, press the button.Rewindthecurrentlyplayingtrackonyour iPod In iPod mode, push and hold the button.Skip to the beginning of the next song on your iPod In iPod mode, press the button.Fast-forward the currently playing track on your iPod In iPod mode, push and hold the button.Tune radio stations In FM radio mode, use the and buttons. See the Listening to the Radio section for additional information.
10Poweron/offbuttonSource buttonPlay/pausebuttonVolume+buttonVolume–buttonTrack back button Track forward buttonFM preset buttons FM preset buttonsAlarm select buttonSnoozebuttonSeek radio stationsInFMradiomode,pressandholdtheTRACKBACK orTRACKFORWARD button. See the Listening to the Radio section for additional information.Store a radio stationIn FM radio mode, tune to the station you’d like to store, and then press and hold one of thePRESETbuttons(P1,P2,P3orP4).Seethe Listening to the Radio section for more information.Select a preset radio stationInFMradiomode,pressthePRESETbutton(P1,P2,P3orP4)thatcorrespondstothestation you’d like to hear. See the Listening to the Radio section for more information.Set the alarm See the Setting the Alarm section for instructions on setting the alarms.Turn off the alarm PresstheALARM1orALARM2buttonwhenthe alarm is sounding.Snoozefor5to60minutes(user-denable)Press the SNOOZE button when the alarm is sounding. See the Setting the Alarm section to learnhowtosetthesnoozeduration.NOTE Forbestresults,aimtheIRremotecontroltowardtheFPONAMEspeakersystem.
11 Wireless Snooze Remote Features (M402SR model only)1 Open the battery compartment.Use a coin or screwdriver to turn the battery compartment door counter-clockwise.2 Position the battery (included) so it sits in the battery holder correctly.Makesurethepolarity(the+and–sidesofthebattery)iscorrect.3 Replace the battery door.NOTE Please discard used batteries properly.How to Connect and Pair the Wireless Snooze Remote1 Connect the snooze remote receiver to the SNOOZE REMOTE jack.The jack is located on the back of the system(M402SRmodelonly).2 Press the PAIRING button on the snooze remote receiver until the LED light stays lit.3 Press any button on the wireless snooze remote twice.TheLEDlightonthesnoozeremotereceiverwillturnoffoncethepairing process is complete.NOTE Anytimeabuttononthewirelesssnoozeremoteispressed,theLEDlightonthesnoozeremotereceiverwillash.ThewirelesssnoozeremoteletsyouoperateselectfunctionsofyourAltecLansing FPO NAME speaker system from across the room. There’s no need to aim it at the speaker system.Snooze Press the buttontoactivatethesnoozetimer.Play a track from your iPodIn iPod mode, press the button. See the Listening to Your iPod section for more information.Pause your iPod In iPod mode, press the button.Turn off the alarm PresstheALARM1orALARM2buttonwhen the alarm is sounding.NOTE See the Using the Wireless Snooze Remote section for installation and pairing instructions.Using the Wireless Snooze Remote (M402SR model only)TheM402SRmodelcomeswithawirelesssnoozeremotethatallowsyoutosnoozwandturnoffyouralarm(andplay/pauseyouriPod)fromacrosstheroom–upto30feet(10meters)away.Inorderforthewirelesssnoozeremotetocontrolthespeakersystem,thesnoozeremotereceivermustbeconnectedtothebackofthespeakersystemandpairedwiththewirelesssnoozeremote.How to Install the Wireless Snooze Remote BatteryThewirelesssnoozeremotebattery(included)isnotinstalledatthefactory.Toinstallthewirelesssnoozeremotebattery,followthestepsbelow:ANTENNASNOOZEREMOTE
12Listening to Your iPod1 Dock your iPod in the Altec Lansing FPO NAME speaker system.2 Select iPod mode.Press the buttononyourM402orenhancedremoteuntilthe iPod icon appears on the LCD.3 Press the button on your iPod, speaker system, enhanced remote, or wireless snooze remote (M402SR model only).Music from your iPod will start playing. The speaker system and its remotearecapableofcontrollingbasicfunctionsof3rd-generationiPods and the iPod touch.4 Adjust the volume.UsetheVOLUMEINCREASEandVOLUMEDECREASEbuttonsonthe Altec Lansing speaker system to adjust the system volume. Or, usetheVOLUME+andVOLUME–buttonsontheenhancedremote.5 Find your desired song.Press the or button on your speaker system or enhanced remote to go to the next or previous track. Press and hold the or button on your speaker system or enhanced remote while track is playing for high-speed forward or reverse music search of the current track.How to Access Additional Features on Your iPod Using the Enhanced RemoteShuffle your entire song libraryPresstheP1buttononceontheenhanced remote. The icon will be displayed.Shuffle albumsPresstheP1buttontwiceontheenhanced remote. The icon will be displayed.RepeatthecurrentsongPresstheP2buttononceontheenhanced remote. The icon will be displayed.RepeatthecurrentplaylistPresstheP2buttontwiceontheenhanced remote. The icon will be displayed.PresstheP2buttonagaintocancel the repeat setting.Access the previous playlist PresstheP3buttonontheenhancedremote.Access the next playlist Press the P4 button on the enhanced remote.Charging your iPodWhenever your iPod is docked and your Altec Lansing FPO NAME speaker systemispluggedintoanACoutlet,youriPodischarging(untilfullycharged)–evenifthespeakersystemisswitchedoff.

Navigation menu